arXiv subjects

Rowan J. Smith

Publications and source records attributed to Rowan J. Smith.

At least 19 recordsLinked to original sources

arXiv2026

The $σ_s^2-\mathcal{M}$ relation in the multi-phase ISM: Exploring the density PDF with the Cloud Factory simulations

The density probability distribution (PDF) of molecular clouds is a crucial component of analytical theories of star formation. In idealised simulations of isothermal turbulence, the width of the density PDF, $σ_s^2$, is dependent on the sonic Mach number of the medium, $\mathcal{M}$. The $σ_s^2-\mathcal{M}$ relation is widely used to connect cloud-scale turbulence to the density PDF, and further to star formation activity, yet its validity within individual phases of the multi-phase interstellar medium (ISM) remains untested. In this study, we evaluate whether the $σ_s^2-\mathcal{M}$ relation is applicable to individual phases of the ISM. We study the density PDFs of molecular cloud complexes in the Cloud Factory simulations; a suite of detailed zoom-in simulations that self-consistently generate a turbulent, multi-phase ISM. We test whether the $σ_s^2-\mathcal{M}$ relation holds in the hot ionised medium (HIM), warm ionised medium (WIM), warm neutral medium (WNM), cold neutral medium (CNM), the molecular phase, and the highly-shielded molecular phase traced by CO. We find the applicability of the classical $σ_s^2-\mathcal{M}$ relation to vary between phases and depend strongly on how $σ_s^2$ and $\mathcal{M}$ are measured. The relation fails to capture the widths of the WNM and CNM density distributions, with possible contributing factors including non-isothermality and large-scale coherent motions. In contrast, we find the $σ_s^2-\mathcal{M}$ relation to tentatively hold for the log-normal portion of the H$_2$ distribution. The width of the CO density PDF is systematically overpredicted by the classical relation, resulting from the selective nature of CO as a molecular gas tracer.

astro-ph.GA↗

arXiv2026

The Structure of Molecular Gas in PHANGS-ALMA Galaxies: Cloud Spacing, Two-Point Correlation and Stacked Intensity Profiles

The sub-kpc scale gas structure encodes key information of giant molecular cloud (GMC) formation. Therefore, we aim for a quantitative description of molecular gas structure across 150-1000 pc using a sample of 8984 GMCs from 40 galaxies observed by PHANGS-ALMA. We homogenize our data to a fixed resolution of 150 pc and mass sensitivity of 2.5 M$_{\odot}$ pc$^{-2}$ to remove observational bias. We then calculate nearest neighbour distances, neighbour number density, and two-point correlation functions for the catalogued GMCs. When analysing the two-point correlation function, we generate several control samples that reflect different null hypotheses on large spatial scales. We stack integrated intensity CO emission profiles around the position of catalogued GMCs to probe the gas distribution on scales between the resolution limit and the typical GMC-GMC spacing. Our measurements of cloud spacing and number of neighbours show that GMC clustering follows the large-scale gas distribution. Once we account for this contribution, the peak excess clustering in the two-point correlation function drops from 1+$ω$ of 2.3 to 1.3, with the power-law slope flattened from -0.25 to 0. We show that the stacked CO intensity profiles around CO peaks can be recovered by the "GMC size" measured by CPROPS, with an additional 20% of the flux in an extended component beyond 500 pc. We find that our stacked profiles can be fit with a double Gaussian function plus a constant offset. The broad Gaussian component accounts for 70% of the over-density power above the constant offset, and is stronger around massive and gravitationally bound GMCs. Our results indicate that galactic structure regulates the GMC distribution in galaxy disks, and the formation of massive, gravitationally bound GMCs is related to strong local gas clustering.

astro-ph.GA↗

arXiv2025

Transient protostellar cores in high mass star forming regions revealed by time-resolved synthetic imaging of dust emission

The connection between dense gas cores and their infant protostars is key to understanding how stars form in molecular clouds. In this paper we investigate the properties, persistence, and protostellar content of cores that would be identified by a dendrogram analysis of 1.3 mm ALMA images. We use a time series of synthetic images produced by post-processing a simulation of star formation in a massive globally collapsing clump, with polaris to calculate dust radiative transfer and CASA to generate synthetic ALMA data. Identifying sinks in the simulation with protostars, we find that most dendrogram-identified cores do not contain any protostars, with many cores being transient features associated with clumpy flow along feeder filaments. Cores with protostars generally host <4, and protostellar mass is not strongly correlated with the mass of the parent cores due to their transience and shifting boundaries. Calculating observationally-relevant intensity-weighted average temperatures for all cores, we find that even at early times the core temperature distribution spans tens of Kelvin, and its width increases with time. The 1.3 mm peak and integrated intensity of the brightest mm core do not increase monotonically as the most massive associated protostar grows, indicating it cannot be assumed that brighter mm sources host more massive protostars. Leveraging the time domain, we test observational properties that have been proposed as potential evolutionary indicators and find that only the total 1.3 mm flux density of the region, the total 1.3 mm flux density in cores, and the number of cores show strong, statistically significant correlation with time.

astro-ph.GA↗

arXiv2025

How is cold, star-forming gas in galaxies affected by magnetic fields?

Numerical simulations provide a unique opportunity to improve our understanding of the role of magnetic fields in the interstellar medium of galaxies and in star formation. However, many existing galaxy-scale numerical simulations impose a Kennicutt-Schmidt (KS) star formation law by construction. In this paper, we present two Arepo simulations of an isolated star-forming galaxy with and without magnetic fields, using sink particles to model star formation without imposing a KS relation. We examine global differences between the models, and investigate the impacts on star formation. We include a time-dependent, non-equilibrium chemical network coupled to a thermal evolution scheme and supernova feedback. Our magnetic field amplifies via dynamo action from a small initial seed field. We find a more compact magnetohydrodynamic (MHD) disc (radius ~ 5.1kpc, compared to ~ 7.4kpc), with a diffuse atomic envelope above and below the plane that is not seen in the hydrodynamic (HD) case. The HD disc displays a smoother, more even radial distribution of gas and star formation, and more bubbly substructure. Our MHD simulation has a higher proportion of dense, gravitationally unbound gas than the HD case, but a lower star formation rate, an average between 125-150Myr of ~ 4.8 solar masses per year, compared to ~ 8.4 solar masses per year. We see a clear shift in the KS relation to higher gas surface densities in the MHD case, more consistent with observations. The additional magnetic support against gravitational collapse seems to raise the threshold gas surface density required for star formation.

astro-ph.GA↗

arXiv2025

A bottleneck for star formation: the importance of magnetic fields during the formation of cold gas in galaxies

Using a high-resolution simulation of a dwarf galaxy, we quantify the energetic importance of magnetic fields within the different phases of its interstellar medium (ISM) on parsec scales. We show that, whilst overall the magnetic field is only energetically dominant for a small fraction of the ISM, it becomes important in the thermally unstable regime (45.2% of the mass is magnetically dominated), and in the majority of the cold neutral medium (66.1% of the mass). In the molecular gas, the magnetic field dominates more of the total mass budget (39.8%) than thermal energy, turbulent kinetic energy, or gas self-gravitating potential energy. However, much of this gas will be CO-dark. This suggests that magnetic forces are non-negligible during the formation of cold dense gas, which will slow its collapse and lead to an increase in the fraction of cold atomic, and molecular gas in the ISM. Consequently, star-forming clouds may be surrounded by a larger reservoir of cold gas than would otherwise be expected.

astro-ph.GA↗

arXiv2025

Simulating nearby disc galaxies on the main star formation sequence II. The gas structure transition in low and high stellar mass discs

Recent hydrodynamical simulations of isolated barred disc galaxies have suggested a structural change in the distribution of the interstellar medium (ISM) around a stellar mass M$_{*}$ of $10^{10}$ M$_{\odot}$. In the higher-mass regime (M$_{*} \geq 10^{10}$ M$_{\odot}$), we observe the formation of a central gas and stellar disc with a typical size of a few hundred parsecs connected through lanes to the ends of the stellar bar. In the lower-mass regime (M$_{*} < 10^{10}$ M$_{\odot}$), such an inner disc is absent and the gas component exhibits a more chaotic distribution. Observations of nearby star-forming galaxies support the existence of such a change. These inner gas discs may represent an important intermediate scale connecting the large kiloparsec-scale structures with the nuclear (sub-parsec) region, transporting gas inwards to fuel the central supermassive black hole (SMBH). For this work, we used an extended set of high-resolution hydrodynamical simulations of isolated disc galaxies with initial properties (i.e. stellar mass, gas fraction, stellar disc scale length, and the bulge mass fraction) with properties covering the range of galaxies in the PHANGS sample to investigate this change of regime. We studied the physical properties of the star-forming ISM in both stellar mass regimes and extracted a few physical tracers: the inner Lindblad resonance (ILR), the probability distribution function (PDF), the virial parameter, and the Mach number. In line with observations, we confirm a structure transition in the simulations that occurs between a stellar mass of $10^{9.5}$ and $10^{10}$ M$_{\odot}$. We show that the physical origin of this change of regime is driven by stellar feedback and its contribution relative to the underlying gravitational potential.

astro-ph.GA↗

arXiv2025

Reconciling extragalactic star formation efficiencies with theory: insights from PHANGS

New extragalactic measurements of the cloud population-averaged star formation (SF) efficiency per freefall time $\rmε_{\rm ff}$ from PHANGS show little sign of theoretically predicted dependencies on cloud-scale virial level or velocity dispersion. We explore ways to bring theory into consistency with observations, highlighting systematic variations in internal density structure that must happen together with an increase in virial level typical towards galaxy centers. To introduce these variations into conventional turbulence-regulated SF models we adopt three adjustments motivated by the host galaxy's influence on the cloud-scale: we incorporate self-gravity and a gas density distribution that contains a broad power-law (PL) component and resembles the structure observed in local resolved clouds, we let the internal gas kinematics include motion in the background potential and let this regulate the onset of self-gravitation, and we assume that the gas density distribution is in a steady-state for only a fraction of a freefall time. The combined result is a strong reduction to $\rmε_{\rm ff}$ predicted in multi-freefall (MFF) scenarios compared to purely lognormal probability density functions and variations that are tied to the PL slope $α$. The $α$ needed to match PHANGS $\rmε_{\rm ff}$'s vary systematically with environment in the sense that gas sitting furthest from virial balance contains more gas at high density. With this `galaxy regulation' behavior included, our `self-gravitating' sgMFF models function similar to the original, roughly `virialized cloud' single-freefall models. However, outside disks with their characteristic regulation, the flexible MFF models may be better suited.

astro-ph.GA↗

arXiv2025

The Role of Magnetic Fields in the Formation of High-Mass Star-Forming Cores

Magnetic fields are often invoked as playing a primary role in star formation and in the formation of high-mass stars. We investigate the effect of magnetic fields on the formation of high-mass cores using the 3-dimensional smoothed particle magnetohydrodynamics (SPMHD) code PHANTOM. We follow the collapse of six molecular clouds of mass 1000 M$_{\odot}$, four of which are initially magnetized with mass-to-flux ratios 3, 5, 10 and 100, respectively, and two purely hydrodynamic clouds with varying initial strengths of turbulence. We then apply an in-house clump-finding algorithm to the 3D SPH data in order to quantify the differences in mass and properties of the cores across the degrees of magnetic and turbulent support. We find that although the magnetic fields cause differences in the global cloud evolution, the masses and properties of the cores which form are broadly similar across the different initial conditions. Cores initially form with masses comparable to the initial thermal Jeans mass of the clouds, and then slowly increase in mass with time. We find that regardless of initial magnetization, the fields become dynamically relevant at densities of $ρ> 1\times10^{-17}$ g cm$^{-3}$ - comparable to core densities - and channel material along the field lines, decreasing the stable magnetic Jeans mass, such that the limiting factor for fragmentation is the thermal Jeans mass. We conclude that magnetic fields are not capable of forming and supporting initially high-mass cores against fragmentation.

astro-ph.GA↗

arXiv2024

Do stars still form in molecular gas within CO-dark dwarf galaxies?

In the Milky Way and other main-sequence galaxies, stars form exclusively in molecular gas, which is traced by CO emission. However, low metallicity dwarf galaxies are often `CO-dark' in the sense that CO emission is not observable even at the high resolution and sensitivities of modern observing facilities. In this work we use ultra high-resolution simulations of four low-metalicity dwarf galaxies (which resolve star formation down to the scale of star-forming cores, 0.01 pc) combined with a time-dependent treatment of the chemistry of the interstellar medium, to investigate the star formation environment in this previously hidden regime. By generating synthetic observations of our models we show that the galaxies have high to extremely high dark gas fractions (0.13 to 1.00 dependent on beam size and conditions), yet despite this form stars. However, when examined on smaller scales, we find that the stars still form in regions dominated by molecular gas, it is simply that these are far smaller than the scale of the beam (1.5"). Thus, while stars in CO-dark dwarf galaxies form in small molecular cores like larger galaxies, their cloud-scale environment is very different.

astro-ph.GA↗

arXiv2024

CO isotopologue-derived molecular gas conditions and CO-to-H$_2$ conversion factors in M51

Over the past decade, several millimeter interferometer programs have mapped the nearby star-forming galaxy M51 at a spatial resolution of ${\le}170$ pc. This study combines observations from three major programs: the PdBI Arcsecond Whirlpool Survey (PAWS), the SMA M51 large program (SMA-PAWS), and the Surveying the Whirlpool at Arcseconds with NOEMA (SWAN). The dataset includes the (1-0) and (2-1) rotational transitions of $^{12}$CO, $^{13}$CO, and C$^{18}$O isotopologues. The observations cover the $r{<}\rm 3\,kpc$ region including center and part of the disk, thereby ensuring strong detections of the weaker $^{13}$CO and C$^{18}$O lines. All observations are convolved in this analysis to an angular resolution of 4$''$, corresponding to a physical scale of ${\sim}$170 pc. We investigate empirical line ratio relations and quantitatively evaluate molecular gas conditions such as temperature, density, and the CO-to-H$_2$ conversion factor ($α_{\rm CO}$). We employ two approaches to study the molecular gas conditions: (i) assuming local thermal equilibrium (LTE) to analytically determine the CO column density and $α_{\rm CO}$, and (ii) using non-LTE modeling with RADEX to fit physical conditions to observed CO isotopologue intensities. We find that the $α_{\rm CO}$ values {in the center and along the inner spiral arm} are $\sim$0.5 dex (LTE) and ${\sim}$0.1 dex (non-LTE) below the Milky Way inner disk value. The average non-LTE $α_{\rm CO}$ is $2.4{\pm}0.5$ M$_\odot$ pc$^{-2}$ (K km s$^{-1}$)$^{-1}$. While both methods show dispersion due to underlying assumptions, the scatter is larger for LTE-derived values. This study underscores the necessity for robust CO line modeling to accurately constrain the molecular ISM's physical and chemical conditions in nearby galaxies.

astro-ph.GA↗

arXiv2024

Filamentary Molecular Cloud Formation via Collision-induced Magnetic Reconnection in Cold Neutral Medium

We have investigated the possibility of molecular cloud formation via the Collision-induced Magnetic Reconnection (CMR) mechanism of the cold neutral medium (CNM). Two atomic gas clouds with conditions typical of the CNM were set to collide at the interface of reverse magnetic fields. The cloud-cloud collision triggered magnetic reconnection and produced a giant 20pc filamentary structure which was not seen in the control models without CMR. The cloud, with rich fiber-like sub-structures, developed a fully molecular spine at 5Myr. Radiative transfer modeling of dust emission at far infrared wavelengths showed that the middle part of the filament contained dense cores over a span of 5pc. Some of the cores were actively forming stars and typically exhibited both connecting fibers in dust emission and high-velocity gas in CO line emission, indicative of active accretion through streamers. Supersonic turbulence was present in and around the CMR-filament due to inflowing gas moving at supersonic velocities in the collision mid-plane. The shocked gas was condensed and transported to the main filament piece by piece by reconnected fields, making the filament and star formation a bottom-up process. Instead of forming a gravitationally bounded cloud which then fragments hierarchically (top-down) and forms stars, the CMR process creates dense gas pieces and magnetically transports them to the central axis to constitute the filament. Since no turbulence is manually driven, our results suggest that CMR is capable of self-generating turbulence. Finally, the resulting helical field should show field-reversal on both sides of the filament from most viewing angles.

astro-ph.GA↗

arXiv2024

Self-consistent modelling of the Milky Way structure using live potentials

To advance our understanding of the evolution of the interstellar medium (ISM) of our Galaxy, numerical models of Milky Way (MW) type galaxies are widely used. However, most models only vaguely resemble the MW (e.g. in total mass), and often use imposed analytic potentials (which cannot evolve dynamically). This poses a problem in asserting their applicability for the interpretation of observations of our own Galaxy. The goal of this work is to identify a numerical model that is not only a MW-type galaxy, but one that can mimic some of the main observed structures of our Galaxy, using dynamically evolving potentials, so that it can be used as a base model to study the ISM cycle in a galaxy like our own. This paper introduces a suite of 15 MW-type galaxy models developed using the {\sc arepo} numerical code, that are compared to Galactic observations of $^{12}$CO and \ion{H}{I} emission via longitude-velocity plots, from where we extract and compare the skeletons of major galactic features and the terminal gas velocities. We found that our best-fitting model to the overall structure, also reproduces some of the more specific observed features of the MW, including a bar with a pattern speed of $30.0 \pm 0.2$ km\,s$^{-1}$\,kpc$^{-1}$, a bar half-length of $3.2 \pm 0.8$\,kpc. Our model shows large streaming motions around spiral arms, and strong radial motions well beyond the inner bar. This model highlights the complex motions of a dynamic MW-type galaxy and has the potential to offer valuable insight into how our Galaxy regulates the ISM and star formation.

astro-ph.GA↗

arXiv2024

Decaying turbulence in molecular clouds: how does it affect filament networks and star formation?

The fragmentation of gas to form stars in molecular clouds is intrinsically linked to the turbulence within them. These internal motions are set at the birth of the cloud and may vary with galactic environment and as the cloud evolves. In this paper, we introduce a new suite of 15 high-resolution 3D molecular cloud simulations using the moving mesh code AREPO to investigate the role of different decaying turbulent modes (mixed, compressive and solenoidal) and virial ratios on the evolution of a $10^4\mathrm{M}_{\odot}$ molecular cloud. We find that diffuse regions maintain a strong relic of the initial turbulent mode, whereas the initial gravitational potential dominates dense regions. Solenoidal seeded models thus give rise to a diffuse cloud with filament-like morphology, and an excess of brown dwarf mass fragments. Compressive seeded models have an early onset of star-formation, centrally condensed morphologies and a higher accretion rate, along with overbound clouds. 3D filaments identified using DisPerSE and analyzed through a new Python toolkit we develop and make publicly available with this work called FIESTA, show no clear trend in lengths, masses and densities between initial turbulent modes. Overbound clouds, however, produce more filaments and thus have more mass in filaments. The hubs formed by converging filaments are found to favour star-formation, with surprisingly similar mass distributions independent of the number of filaments connecting the hub.

astro-ph.GA↗

arXiv2024

A deep-learning approach to the 3D reconstruction of dust density and temperature in star-forming regions

Aims: We introduce a new deep-learning approach for the reconstruction of 3D dust density and temperature distributions from multi-wavelength dust emission observations on the scale of individual star-forming cloud cores (<0.2pc). Methods: We construct a training data set by processing cloud cores from the Cloud Factory simulations with the POLARIS radiative transfer code to produce synthetic dust emission observations at 23 wavelengths between 12 and 1300 $μ$m. We simplify the task by reconstructing the cloud structure along individual lines of sight and train a conditional invertible neural network (cINN) for this purpose. The cINN belongs to the group of normalising flow methods and is able to predict full posterior distributions for the target dust properties. We test different cINN setups, ranging from a scenario that includes all 23 wavelengths down to a more realistically limited case with observations at only seven wavelengths. We evaluate the predictive performance of these models on synthetic test data. Results: We report an excellent reconstruction performance for the 23-wavelengths cINN model, achieving median absolute relative errors of about 1.8% in $\log(n/m^{-3})$ and 1% in $\log(T_{dust}/K)$, respectively. We identify trends towards overestimation at the low end of the density range and towards underestimation at the high end of both the density and temperature values, which may be related to a bias in the training data. Limiting our coverage to a combination of only seven wavelengths, we still find a satisfactory performance with average absolute relative errors of about 3.3% and 2.5% in $\log(n/m^{-3})$ and $\log(T_{dust}/K)$. Conclusions: This proof-of-concept study shows that the cINN-based approach for 3D reconstruction of dust density and temperature is very promising and even compatible with a more realistically constrained wavelength coverage.

astro-ph.GA↗

arXiv2024

On the evolution of the observed Mass-to-Length relationship for star-forming filaments

The interstellar medium is threaded by a hierarchy of filaments from large scales (~ 100 pc) to small scales (~ 0.1pc). The masses and lengths of these nested structures may reveal important constraints for cloud formation and evolution, but it is difficult to investigate from an evolutionary perspective using single observations. In this work, we extract simulated molecular clouds from the Cloud Factory galactic-scale ISM suite in combination with 3D Monte Carlo radiative transfer code POLARIS to investigate how filamentary structure evolves over time. We produce synthetic dust continuum observations in three regions with a series of snapshots and use the Filfinder algorithm to identify filaments in the dust derived column density maps. When the synthetic filaments mass and length are plotted on an M-L plot, we see a scaling relation of $L\propto M^{0.45}$ similar to that seen in observations, and find that the filaments are thermally supercritical. Projection effects systematically affect the masses and lengths measured for the filaments, and are particularly severe in crowded regions. In the filament Mass-Length (M-L) diagram we identify three main evolutionary mechanisms: accretion, segmentation, and dispersal. In particular we find that the filaments typically evolve from smaller to larger masses in the observational M-L plane, indicating the dominant role of accretion in filament evolution. Moreover, we find a potential correlation between line mass and filament growth rate. Once filaments are actively star forming they then segment into smaller sections, or are dispersed by internal or external forces.

astro-ph.GA↗

arXiv2023

ALMA observations of the Extended Green Object G19.01$-$0.03: II. A massive protostar with typical chemical abundances surrounded by four low-mass prestellar core candidates

We present a study of the physical and chemical properties of the Extended Green Object (EGO) G19.01$-$0.03 using sub-arcsecond angular resolution Atacama Large Millimeter/submillimeter Array (ALMA) 1.05mm and Karl G. Jansky Very Large Array (VLA) 1.21cm data. G19.01$-$0.03 MM1, the millimetre source associated with the central massive young stellar object (MYSO), appeared isolated and potentially chemically young in previous Submillimeter Array observations. In our $\sim0.4''$-resolution ALMA data, MM1 has four low-mass millimetre companions within 0.12pc, all lacking maser or outflow emission, indicating they may be prestellar cores. With a rich ALMA spectrum full of complex organic molecules, MM1 does not appear chemically young, but has molecular abundances typical of high-mass hot cores in the literature. At the 1.05mm continuum peak of MM1, $\mathrm{N}(\mathrm{CH}_{3}\mathrm{OH})=(2.22\pm0.01)\times10^{18}$cm$^{-2}$ and $T_{\mathrm{ex}} = 162.7\substack{+0.3 \\ -0.5}$K based on pixel-by-pixel Bayesian analysis of LTE synthetic methanol spectra across MM1. Intriguingly, the peak CH$_{3}$OH $T_{\mathrm{ex}}=165.5\pm0.6$ K is offset from MM1's millimetre continuum peak by $0.22''\sim880$au, and a region of elevated CH$_{3}$OH $T_{\mathrm{ex}}$ coincides with free-free VLA 5.01cm continuum, adding to the tentative evidence for a possible unresolved high-mass binary in MM1. In our VLA 1.21cm data, we report the first NH$_{3}$(3,3) maser detections towards G19.01$-$0.03, along with candidate 25GHz CH$_{3}$OH $5(2,3)-5(1,4)$ maser emission; both are spatially and kinematically coincident with 44GHz Class I CH$_{3}$OH masers in the MM1 outflow. We also report the ALMA detection of candidate 278.3GHz Class I CH$_{3}$OH maser emission towards this outflow, strengthening the connection of these three maser types to MYSO outflows.

astro-ph.GA↗

arXiv2023

On the distribution of the Cold Neutral Medium in galaxy discs

The Cold Neutral Medium (CNM) is an important part of the galactic gas cycle and a precondition for the formation of molecular and star forming gas, yet its distribution is still not fully understood. In this work we present extremely high resolution simulations of spiral galaxies with time-dependent chemistry such that we can track the formation of the CNM, its distribution within the galaxy, and its correlation with star formation. We find no strong radial dependence between the CNM fraction and total HI due to the decreasing interstellar radiation field counterbalancing the decreasing gas column density at larger galactic radii.However, the CNM fraction does increase in spiral arms where the CNM distribution is clumpy, rather than continuous, overlapping more closely with H2. The CNM doesn't extend out radially as far as HI, and the vertical scale height is smaller in the outer galaxy compared to HI with no flaring. The CNM column density scales with total midplane pressure and disappears from the gas phase below values of PT/kB =1000 K/cm3. We find that the star formation rate density follows a similar scaling law with CNM column density to the total gas Kennicutt-Schmidt law. In the outer galaxy we produce realistic vertical velocity dispersions in the HI purely from galactic dynamics but our models do not predict CNM at the extremely large radii observed in HI absorption studies of the Milky Way. We suggest that extended spiral arms might produce isolated clumps of CNM at these radii.

astro-ph.GA↗

arXiv2023

Fuelling the nuclear ring of NGC 1097

Galactic bars can drive cold gas inflows towards the centres of galaxies. The gas transport happens primarily through the so-called bar ``dust lanes'', which connect the galactic disc at kpc scales to the nuclear rings at hundreds of pc scales much like two gigantic galactic rivers. Once in the ring, the gas can fuel star formation activity, galactic outflows, and central supermassive black holes. Measuring the mass inflow rates is therefore important to understanding the mass/energy budget and evolution of galactic nuclei. In this work, we use CO datacubes from the PHANGS-ALMA survey and a simple geometrical method to measure the bar-driven mass inflow rate onto the nuclear ring of the barred galaxy NGC~1097. The method assumes that the gas velocity in the bar lanes is parallel to the lanes in the frame co-rotating with the bar, and allows one to derive the inflow rates from sufficiently sensitive and resolved position-position-velocity diagrams if the bar pattern speed and galaxy orientations are known. We find an inflow rate of $\dot{M}=(3.0 \pm 2.1)\, \rm M_\odot\, yr^{-1}$ averaged over a time span of 40 Myr, which varies by a factor of a few over timescales of $\sim$10 Myr. Most of the inflow appears to be consumed by star formation in the ring which is currently occurring at a rate of ${\rm SFR}\simeq~1.8$-$2 \rm M_\odot\, yr^{-1}$, suggesting that the inflow is causally controlling the star formation rate in the ring as a function of time.

astro-ph.GA↗