arXiv subjects

Ronald L. Walsworth

Publications and source records attributed to Ronald L. Walsworth.

At least 37 records · Page 2Linked to original sources

arXiv2024

High-resolution, Wide-frequency-range Magnetic Spectroscopy with Solid-state Spin Ensembles

Quantum systems composed of solid-state electronic spins can be sensitive detectors of narrowband magnetic fields. A prominent example is the nitrogen-vacancy (NV) center in diamond, which has been employed for magnetic spectroscopy with high spatial and spectral resolution. However, NV-diamond spectroscopy protocols are typically based on dynamical decoupling sequences, which are limited to low-frequency signals ($\lesssim{20}\,$MHz) due to the technical requirements on microwave (MW) pulses used to manipulate NV electronic spins. In this work, we experimentally demonstrate a high-resolution magnetic spectroscopy protocol that integrates a quantum frequency mixing (QFM) effect in a dense NV ensemble with coherently averaged synchronized readout (CASR) to provide both a wide range of signal frequency detection and sub-Hz spectral resolution. We assess the sensitivity of this QFM-CASR protocol across a frequency range of 10$\,$MHz to 4$\,$GHz. By measuring the spectra of multi-frequency signals near 0.6, 2.4 and 4$\,$GHz, we demonstrate sub-Hz spectral resolution with a nT-scale noise floor for the target signal, and precise phase measurement with error $<1^\circ$. Compared to state-of-the-art NV-diamond techniques for narrowband magnetic spectroscopy, the QFM-CASR protocol greatly extends the detectable frequency range, enabling applications in high-frequency radio frequency (RF) and MW signal microscopy and analysis, as well as tesla-scale nuclear magnetic resonance (NMR) spectroscopy of small samples.

quant-ph↗

arXiv2024

Quantum Diamond Microscope for Narrowband Magnetic Imaging with High Spatial and Spectral Resolution

The quantum diamond microscope (QDM) is a recently developed technology for near-field imaging of magnetic fields with micron-scale spatial resolution. In the present work, we integrate a QDM with a narrowband measurement protocol and a lock-in camera; and demonstrate imaging of radiofrequency (RF) magnetic field patterns produced by microcoils, with spectral resolution $\approx1$\,Hz. This RF-QDM provides multi-frequency imaging with a central detection frequency that is easily tunable over the MHz-scale, allowing spatial discrimination of both crowded spectral peaks and spectrally well-separated signals. The present instrument has spatial resolution $\approx2\,\mathrm{μm}$, field-of-view $\approx300\times300\,\mathrm{μm^2}$, and per-pixel sensitivity to narrowband fields $\sim{1}\,$nT$\cdot$Hz$^{-1/2}$. Spatial noise can be reduced to the picotesla scale by signal averaging and/or spatial binning. The RF-QDM enables simultaneous imaging of the amplitude, frequency, and phase of narrowband magnetic field patterns at the micron-scale, with potential applications in real-space NMR imaging, AC susceptibility mapping, impedance tomography, analysis of electronic circuits, and spatial eddy-current-based inspection.

physics.optics↗

arXiv2024

Nutation-Based Longitudinal Sensing Protocols for High-Field NMR With Nitrogen-Vacancy Centers in Diamond

Nitrogen vacancy (NV) centers in diamond enable nuclear magnetic resonance (NMR) spectroscopy of samples at the nano- and micron scales. However, at typical tesla-scale NMR magnetic field strengths, NV-NMR protocols become difficult to implement due to the challenge of driving fast NV pulse sequences sensitive to nuclear Larmor frequencies above a few megahertz. We perform simulations and theoretical analysis of the experimental viability of NV-NMR at tesla-scale magnetic fields using a new measurement protocol called DRACAERIS (Double Rewound ACquisition Amplitude Encoded Radio Induced Signal). DRACAERIS detects the NMR sample's longitudinal magnetization at a much lower driven Rabi frequency, more suitable technically for NV detection. We discuss how pulse errors, finite pulse lengths, and nuclear spin-spin couplings affect the resulting NMR spectra. We find that DRACAERIS is less susceptible to pulse imperfections and off-resonance effects than previous protocols for longitudinal magnetization detection. We also identify reasonable parameters for experimental implementation.

quant-ph↗

arXiv2024

Diamond Micro-Chip for Quantum Microscopy

The nitrogen vacancy (NV) center in diamond is an increasingly popular quantum sensor for microscopy of electrical current, magnetization, and spins. However, efficient NV-sample integration with a robust, high-quality interface remains an outstanding challenge to realize scalable, high-throughput microscopy. In this work, we characterize a diamond micro-chip (DMC) containing a (111)-oriented NV ensemble; and demonstrate its utility for high-resolution quantum microscopy. We perform strain imaging of the DMC and find minimal detrimental strain variation across a field-of-view of tens of micrometer. We find good ensemble NV spin coherence and optical properties in the DMC, suitable for sensitive magnetometry. We then use the DMC to demonstrate wide-field microscopy of electrical current, and show that diffraction-limited quantum microscopy can be achieved. We also demonstrate the deterministic transfer of DMCs with multiple materials of interest for next-generation electronics and spintronics. Lastly, we develop a polymer-based technique for DMC placement. This work establishes the DMC's potential to expand the application of NV quantum microscopy in materials, device, geological, biomedical, and chemical sciences.

physics.app-ph↗

arXiv2023

Roadmap on Nanoscale Magnetic Resonance Imaging

The field of nanoscale magnetic resonance imaging (NanoMRI) was started 30 years ago. It was motivated by the desire to image single molecules and molecular assemblies, such as proteins and virus particles, with near-atomic spatial resolution and on a length scale of 100 nm. Over the years, the NanoMRI field has also expanded to include the goal of useful high-resolution nuclear magnetic resonance (NMR) spectroscopy of molecules under ambient conditions, including samples up to the micron-scale. The realization of these goals requires the development of spin detection techniques that are many orders of magnitude more sensitive than conventional NMR and MRI, capable of detecting and controlling nanoscale ensembles of spins. Over the years, a number of different technical approaches to NanoMRI have emerged, each possessing a distinct set of capabilities for basic and applied areas of science. The goal of this roadmap article is to report the current state of the art in NanoMRI technologies, outline the areas where they are poised to have impact, identify the challenges that lie ahead, and propose methods to meet these challenges. This roadmap also shows how developments in NanoMRI techniques can lead to breakthroughs in emerging quantum science and technology applications.

cond-mat.mes-hall↗

arXiv2023

Quantum Diamond Microscope for Dynamic Imaging of Magnetic Fields

Wide-field imaging of magnetic signals using ensembles of nitrogen-vacancy (NV) centers in diamond has garnered increasing interest due to its combination of micron-scale resolution, millimeter-scale field of view, and compatibility with diverse samples from across the physical and life sciences. Recently, wide-field NV magnetic imaging based on the Ramsey protocol has achieved uniform and enhanced sensitivity compared to conventional measurements. Here, we integrate the Ramsey-based protocol with spin-bath driving to extend the NV spin dephasing time and improve magnetic sensitivity. We also employ a high-speed camera to enable dynamic wide-field magnetic imaging. We benchmark the utility of this quantum diamond microscope (QDM) by imaging magnetic fields produced from a fabricated wire phantom. Over a $270\times270 \hspace{0.08333em} μ\mathrm{m}$$^2$ field of view, a median per-pixel magnetic sensitivity of $4.1(1)\hspace{0.08333em}\mathrm{nT}$$/\sqrt{\mathrm{Hz}}$ is realized with a spatial resolution $\lesssim\hspace{0.08333em}10\hspace{0.08333em}μ\mathrm{m}$ and sub-millisecond temporal resolution. Importantly, the spatial magnetic noise floor can be reduced to the picotesla scale by time-averaging and signal modulation, which enables imaging of a magnetic-field pattern with a peak-to-peak amplitude difference of about $300\hspace{0.08333em}\mathrm{pT}$. Finally, we discuss potential new applications of this dynamic QDM in studying biomineralization and electrically-active cells.

quant-ph↗

arXiv2023

Directional Detection of Dark Matter Using Solid-State Quantum Sensing

Next-generation dark matter (DM) detectors searching for weakly interacting massive particles (WIMPs) will be sensitive to coherent scattering from solar neutrinos, demanding an efficient background-signal discrimination tool. Directional detectors improve sensitivity to WIMP DM despite the irreducible neutrino background. Wide-bandgap semiconductors offer a path to directional detection in a high-density target material. A detector of this type operates in a hybrid mode. The WIMP or neutrino-induced nuclear recoil is detected using real-time charge, phonon, or photon collection. The directional signal, however, is imprinted as a durable sub-micron damage track in the lattice structure. This directional signal can be read out by a variety of atomic physics techniques, from point defect quantum sensing to x-ray microscopy. In this white paper, we present the detector principle and review the status of the experimental techniques required for directional readout of nuclear recoil tracks. Specifically, we focus on diamond as a target material; it is both a leading platform for emerging quantum technologies and a promising component of next-generation semiconductor electronics. Based on the development and demonstration of directional readout in diamond over the next decade, a future WIMP detector will leverage or motivate advances in multiple disciplines towards precision dark matter and neutrino physics.

physics.ins-det↗

arXiv2023

Mineral Detection of Neutrinos and Dark Matter. A Whitepaper

Minerals are solid state nuclear track detectors - nuclear recoils in a mineral leave latent damage to the crystal structure. Depending on the mineral and its temperature, the damage features are retained in the material from minutes (in low-melting point materials such as salts at a few hundred degrees C) to timescales much larger than the 4.5 Gyr-age of the Solar System (in refractory materials at room temperature). The damage features from the $O(50)$ MeV fission fragments left by spontaneous fission of $^{238}$U and other heavy unstable isotopes have long been used for fission track dating of geological samples. Laboratory studies have demonstrated the readout of defects caused by nuclear recoils with energies as small as $O(1)$ keV. This whitepaper discusses a wide range of possible applications of minerals as detectors for $E_R \gtrsim O(1)$ keV nuclear recoils: Using natural minerals, one could use the damage features accumulated over $O(10)$ Myr$-O(1)$ Gyr to measure astrophysical neutrino fluxes (from the Sun, supernovae, or cosmic rays interacting with the atmosphere) as well as search for Dark Matter. Using signals accumulated over months to few-years timescales in laboratory-manufactured minerals, one could measure reactor neutrinos or use them as Dark Matter detectors, potentially with directional sensitivity. Research groups in Europe, Asia, and America have started developing microscopy techniques to read out the $O(1) - O(100)$ nm damage features in crystals left by $O(0.1) - O(100)$ keV nuclear recoils. We report on the status and plans of these programs. The research program towards the realization of such detectors is highly interdisciplinary, combining geoscience, material science, applied and fundamental physics with techniques from quantum information and Artificial Intelligence.

astro-ph.IM↗

arXiv2023

Snowmass2021 Cosmic Frontier White Paper: Ultraheavy particle dark matter

We outline the unique opportunities and challenges in the search for "ultraheavy" dark matter candidates with masses between roughly $10~{\rm TeV}$ and the Planck scale $m_{\rm pl} \approx 10^{16}~{\rm TeV}$. This mass range presents a wide and relatively unexplored dark matter parameter space, with a rich space of possible models and cosmic histories. We emphasize that both current detectors and new, targeted search techniques, via both direct and indirect detection, are poised to contribute to searches for ultraheavy particle dark matter in the coming decade. We highlight the need for new developments in this space, including new analyses of current and imminent direct and indirect experiments targeting ultraheavy dark matter and development of new, ultra-sensitive detector technologies like next-generation liquid noble detectors, neutrino experiments, and specialized quantum sensing techniques.

hep-ph↗

arXiv2022

Controllable tunability of a Chern number within the electronic-nuclear spin system in diamond

Chern numbers are gaining traction as they characterize topological phases in various physical systems. However, the resilience of the system topology to external perturbations makes it challenging to experimentally investigate transitions between different phases. In this study, we demonstrate the transitions of Chern number from 0 to 3, synthesized in an electronic-nuclear spin system associated with the nitrogen-vacancy (NV) centre in diamond. The Chern number is characterized by the number of degeneracies enclosed in a control Hamiltonian parameter sphere. The topological transitions between different phases are depicted by varying the radius and offset of the sphere. We show that the measured topological phase diagram is not only consistent with the numerical calculations but can also be mapped onto an interacting three-qubit system. The NV system may also allow access to even higher Chern numbers, which can be applied to exploring exotic topology or topological quantum information.

quant-ph↗

arXiv2022

Scanning X-ray Diffraction Microscopy for Diamond Quantum Sensing

Understanding nano- and micro-scale crystal strain in CVD diamond is crucial to the advancement of diamond quantum technologies. In particular, the presence of such strain and its characterization present a challenge to diamond-based quantum sensing and information applications -- as well as for future dark matter detectors where directional information of incoming particles is encoded in crystal strain. Here, we exploit nanofocused scanning X-ray diffraction microscopy to quantitatively measure crystal deformation from defects in diamond with high spatial and strain resolution. Combining information from multiple Bragg angles allows stereoscopic three-dimensional modeling of strain feature geometry; the diffraction results are validated via comparison to optical measurements of the strain tensor based on spin-state-dependent spectroscopy of ensembles of nitrogen vacancy (NV) centers in the diamond. Our results demonstrate both strain and spatial resolution sufficient for directional detection of dark matter via X-ray measurement of crystal strain, and provide a promising tool for diamond growth analysis and improvement of defect-based sensing.

physics.app-ph↗

arXiv2022

High-precision mapping of diamond crystal strain using quantum interferometry

Crystal strain variation imposes significant limitations on many quantum sensing and information applications for solid-state defect qubits in diamond. Thus, precision measurement and control of diamond crystal strain is a key challenge. Here, we report diamond strain measurements with a unique set of capabilities, including micron-scale spatial resolution, millimeter-scale field-of-view, and a two order-of-magnitude improvement in volume-normalized sensitivity over previous work [1], reaching $5(2) \times 10^{-8}/\sqrt{\rm{Hz}\cdot\rm{μm}^3}$ (with spin-strain coupling coefficients representing the dominant systematic uncertainty). We use strain-sensitive spin-state interferometry on ensembles of nitrogen vacancy (NV) color centers in single-crystal CVD bulk diamond with low strain gradients. This quantum interferometry technique provides insensitivity to magnetic-field inhomogeneity from the electronic and nuclear spin bath, thereby enabling long NV ensemble electronic spin dephasing times and enhanced strain sensitivity. We demonstrate the strain-sensitive measurement protocol first on a scanning confocal laser microscope, providing quantitative measurement of sensitivity as well as three-dimensional strain mapping; and second on a wide-field imaging quantum diamond microscope (QDM). Our strain microscopy technique enables fast, sensitive characterization for diamond material engineering and nanofabrication; as well as diamond-based sensing of strains applied externally, as in diamond anvil cells or embedded diamond stress sensors, or internally, as by crystal damage due to particle-induced nuclear recoils.

quant-ph↗

arXiv2022

Ramsey Envelope Modulation in NV Diamond Magnetometry

Nitrogen-vacancy (NV) spin ensembles in diamond provide an advanced magnetic sensing platform, with applications in both the physical and life sciences. The development of isotopically engineered $^{15}$NV diamond offers advantages over naturally occurring $^{14}$NV for magnetometry, due to its simpler hyperfine structure. However, for sensing modalities requiring a bias magnetic field not aligned with the sensing NV axis, the absence of a quadrupole moment in the $^{15}$N nuclear spin leads to pronounced envelope modulation effects in time-dependent measurements of $^{15}$NV spin evolution. While such behavior in spin echo experiments are well studied, analogous effects in Ramsey measurements and the implications for magnetometry remain under-explored. Here, we derive the modulated $^{15}$NV Ramsey response to a misaligned bias field, using a simple vector description of the effective magnetic field on the nuclear spin. The predicted modulation properties are then compared to experimental results, revealing significant magnetic sensitivity loss if unaddressed. We demonstrate that double-quantum coherences of the NV $S=1$ electronic spin states dramatically suppress these envelope modulations, while additionally proving resilient to other parasitic effects such as strain heterogeneity and temperature shifts.

quant-ph↗

arXiv2022

Hardware Trojan Detection Using Unsupervised Deep Learning on Quantum Diamond Microscope Magnetic Field Images

This paper presents a method for hardware trojan detection in integrated circuits. Unsupervised deep learning is used to classify wide field-of-view (4x4 mm$^2$), high spatial resolution magnetic field images taken using a Quantum Diamond Microscope (QDM). QDM magnetic imaging is enhanced using quantum control techniques and improved diamond material to increase magnetic field sensitivity by a factor of 4 and measurement speed by a factor of 16 over previous demonstrations. These upgrades facilitate the first demonstration of QDM magnetic field measurement for hardware trojan detection. Unsupervised convolutional neural networks and clustering are used to infer trojan presence from unlabeled data sets of 600x600 pixel magnetic field images without human bias. This analysis is shown to be more accurate than principal component analysis for distinguishing between field programmable gate arrays configured with trojan free and trojan inserted logic. This framework is tested on a set of scalable trojans that we developed and measured with the QDM. Scalable and TrustHub trojans are detectable down to a minimum trojan trigger size of 0.5% of the total logic. The trojan detection framework can be used for golden-chip free detection, since knowledge of the chips' identities is only used to evaluate detection accuracy

cs.CV↗

arXiv2022

Quantum Logic Enhanced Sensing in Solid-State Spin Ensembles

We demonstrate quantum logic enhanced sensitivity for a macroscopic ensemble of solid-state, hybrid two-qubit sensors. We achieve a factor of 30 improvement in signal-to-noise ratio, translating to a sensitivity enhancement exceeding an order of magnitude. Using the electronic spins of nitrogen vacancy (NV) centers in diamond as sensors, we leverage the on-site nitrogen nuclear spins of the NV centers as memory qubits, in combination with homogeneous bias and control fields, ensuring that all of the ${\sim}10^9$ two-qubit sensors are sufficiently identical to permit global control of the NV ensemble spin states. We find quantum logic sensitivity enhancement for multiple measurement protocols with varying optimal sensing intervals, including XY8 dynamical decoupling and correlation spectroscopy, using a synthetic AC magnetic field. The results are independent of the nature of the target signal and broadly applicable to metrology using NV centers and other solid-state ensembles. This work provides a benchmark for macroscopic ensembles of quantum sensors that employ quantum logic or quantum error correction algorithms for enhanced sensitivity.

quant-ph↗

arXiv2022

Vector Magnetic Current Imaging of an 8 nm Process Node Chip and 3D Current Distributions Using the Quantum Diamond Microscope

The adoption of 3D packaging technology necessitates the development of new approaches to failure electronic device analysis. To that end, our team is developing a tool called the quantum diamond microscope (QDM) that leverages an ensemble of nitrogen vacancy (NV) centers in diamond, achieving vector magnetic imaging with a wide field-of-view and high spatial resolution under ambient conditions. Here, we present the QDM measurement of 2D current distributions in an 8-nm flip chip IC and 3D current distributions in a multi-layer PCB. Magnetic field emanations from the C4 bumps in the flip chip dominate the QDM measurements, but these prove to be useful for image registration and can be subtracted to resolve adjacent current traces in the die at the micron scale. Vias in 3D ICs display only Bx and By magnetic fields due to their vertical orientation and are difficult to detect with magnetometers that only measure the Bz component (orthogonal to the IC surface). Using the multi-layer PCB, we show that the QDM's ability to simultaneously measure Bx, By, and Bz is advantageous for resolving magnetic fields from vias as current passes between layers. We also show how spacing between conducting layers is determined by magnetic field images and how it agrees with the design specifications of the PCB. In our initial efforts to provide further z-depth information for current sources in complex 3D circuits, we show how magnetic field images of individual layers can be subtracted from the magnetic field image of the total structure. This allows for isolation of signal layers and can be used to map embedded current paths via solution of the 2D magnetic inverse. In addition, the paper also discusses the use of neural networks to identify 2D current distributions and its potential for analyzing 3D structures.

physics.app-ph↗

arXiv2021

Multiplexed sensing of magnetic field and temperature in real time using a nitrogen vacancy spin ensemble in diamond

Nitrogen-Vacancy (NV) spin in diamond is a versatile quantum sensor, being able to measure physical quantities such as magnetic field, electric field, temperature, and pressure. In the present work, we demonstrate a multiplexed sensing of magnetic field and temperature. The dual frequency driving technique we employ here is based on frequency-division multiplexing, which enables sensing both measurables in real time. The pair of NV resonance frequencies for dual frequency driving must be selected to avoid coherent population trapping of NV spin states. With an enhanced optical collection efficiency higher than 50 $\%$ and a type 1b diamond crystal with natural abundance $^{13}$C spins, we achieve sensitivities of about 70 pT/$\sqrt{\mathrm{Hz}}$ and 25 $μ$K/$\sqrt{\mathrm{Hz}}$ simultaneously. A high isolation factor of 34 dB in NV thermometry signal against magnetic field was obtained, and we provide a theoretical description for the isolation factor. This work paves the way for extending the application of NV quantum diamond sensors into more demanding conditions.

quant-ph↗

arXiv2021

NMR of $^{31}$P Nuclear Spin Singlet States in Organic Diphosphates

$^{31}$P NMR and MRI are commonly used to study organophosphates that are central to cellular energy metabolism. In some molecules of interest, such as adenosine diphosphate (ADP) and nicotinamide adenine dinucleotide (NAD), pairs of coupled $^{31}$P nuclei in the diphosphate moiety should enable the creation of nuclear spin singlet states, which may be long-lived and can be selectively detected via quantum filters. Here, we show that $^{31}$P singlet states can be created on ADP and NAD, but their lifetimes are shorter than T$_{1}$ and are strongly sensitive to pH. Nevertheless, the singlet states were used with a quantum filter to successfully isolate the $^{31}$P NMR spectra of those molecules from the adenosine triphosphate (ATP) background signal.

physics.chem-ph↗