arXiv subjects
Publications and source records attributed to Ronald Freund.
We implement full-field digital back-propagation with a 1-THz receiver using 20 synchronous frequency-adjacent coherent receivers with digital stitching and a frequency-comb local oscillator. Relative to electronic dispersion compensation, per-channel DBP and full-field DBP achieve throughput gains of 2.2\% and 5.4\%, respectively.
The O-band (1260-1360 nm), located near the minimum of chromatic dispersion of standard single-mode fiber, is the transmission window of major interest and importance for short-reach data-center interconnects. However, full capacity offered by this spectral band is yet to be unlocked, due to limited availability of scalable multi-wavelength, high-power, low noise O-band light engines. While Kerr microcombs in CMOS-compatible silicon nitride resonators provide mutually coherent wavelength channels with precise spacing and chip-scale footprints, their practical deployment in the O-band has been hindered by limited pump laser power, insufficient per-line power and the lack of flat, wideband amplification technologies to uniformly boost multiple coherent carriers. Here we demonstrate a high-power O-band soliton microcomb architecture that overcomes this bottleneck by combining self-injection-locked (SIL) operation in a Silicon Nitride microring with a single-stage bismuth-doped phosphosilicate fiber amplifier designed for wideband, flat-top gain. The SIL microcomb operates with an 834 GHz free spectral range and spans over 1050-1650 nm. The amplifier simultaneously boosts 21 O-band lines across 100 nm to powers exceeding 0 dBm per carrier without gain flattening or external equalization, while preserving low-noise characteristics. We validate each amplified microcomb line as a carrier across the entire O-band using dual-polarization 32 GBaud 64-QAM coherent transmission. This approach establishes a practical route towards high-power, broadband O-band microcomb engines for next-generation data-center interconnects and scalable photonic systems.
We present a resynchronization method for quantum key distribution (QKD) systems that enables rapid and reliable recovery from interruptions of the quantum channel and changes of its optical path length. By periodically transmitting short fixed pulse patterns over the quantum channel, our approach achieves swift clock offset recovery, typically within a few hundred milliseconds. We implemented this method in our time-bin-phase BB84 QKD system, demonstrating successful resynchronization after multi-minute channel interruptions and fiber length changes exceeding 100 km. The method can be retrofitted to existing systems via a software upgrade and without hardware changes, allowing for broad applicability. In total, the resynchronization method significantly enhances QKD system resilience and allows for reliable operation in challenging environments such as dynamically routed optical networks, i.e., software-defined networks, and free-space optical links with mobile nodes.
This paper presents the development and implementation of a versatile ad-hoc metropolitan-range Quantum Key Distribution (QKD) network. The approach presented integrates various types of physical channels and QKD protocols, and a mix of trusted and untrusted nodes. Unlike conventional QKD networks that predominantly depend on either fiber-based or free-space optical (FSO) links, the testbed presented amalgamates FSO and fiber-based links, thereby overcoming some inherent limitations. Various network deployment strategies have been considered, including permanent infrastructure and provisional ad-hoc links to eradicate coverage gaps. Furthermore, the ability to rapidly establish a network using portable FSO terminals and to investigate diverse link topologies is demonstrated. The study also showcases the successful establishment of a quantum-secured link to a cloud server.
The fields of machine learning and artificial intelligence drive researchers to explore energy-efficient, brain-inspired new hardware. Reservoir computing encompasses recurrent neural networks for sequential data processing and matches the performance of other recurrent networks with less training and lower costs. However, traditional software-based neural networks suffer from high energy consumption due to computational demands and massive data transfer needs. Photonic reservoir computing overcomes this challenge with energy-efficient neuromorphic photonic integrated circuits or NeuroPICs. Here, we introduce a reservoir NeuroPIC used for modulation format identification in C-band telecommunication network monitoring. It is built on a silicon-on-insulator platform with a 4-port reservoir architecture consisting of a set of physical nodes connected via delay lines. We comprehensively describe the NeuroPIC design and fabrication, experimentally demonstrate its performance, and compare it with simulations. The NeuroPIC incorporates non-linearity through a simple digital readout and achieves close to 100% accuracy in identifying several configurations of quadrature amplitude modulation formats transmitted over 20 km of optical fiber at 32 GBaud symbol rate. The NeuroPIC performance is robust against fabrication imperfections like waveguide propagation loss, phase randomization, etc. and delay line length variations. Furthermore, the experimental results exceeded numerical simulations, which we attribute to enhanced signal interference in the experimental NeuroPIC output. Our energy-efficient photonic approach has the potential for high-speed temporal data processing in a variety of applications.
We introduce iQSync, a clock offset recovery method designed for implementation on low-level hardware, such as FPGAs or microcontrollers, for quantum key distribution (QKD). iQSync requires minimal memory, only a simple instruction set (e.g. no floating-point operations), and can be evaluated with sublinear time complexity, typically involving no more than a few thousand iterations of a simple loop. Furthermore, iQSync allows for a precise clock offset recovery within few seconds, even for large offsets, and is well suited for scenarios with high channel loss and low signal-to-noise ratio, irrespective of the prepare-and-measure QKD protocol used. We implemented the method on our QKD platform, demonstrating its performance and conformity with analytically derived success probabilities for channel attenuations exceeding 70 dB.
We present an implementation of the time-frequency (TF) quantum key distribution (QKD) protocol realized mainly with standard telecommunication components at 1550 nm. TF-QKD is implemented with modulations in time and frequency, namely pulse position modulation (PPM) and frequency shift keying (FSK). The time-frequency uncertainty relation ensures the security of the protocol. We further demonstrate free-space optical QKD transmission over a 388-m distance. Since the QKD setup is single-mode fiber (SMF) -based, precise coupling in and out of the SMFs is crucial. Thus, we implemented an optical tracking system. The QKD signal is wavelength-multiplexed with a strong beacon for optical tracking. Strong spectral filtering is necessary to separate beacon and QKD signal. Together with spatial filtering caused by the SMF most background light is filtered, enabling daylight QKD transmission.
We demonstrate an LED-based optical wireless link for fixed wireless access applications, at data rates of 1.5 Gbit/s over 50 m. Transmission between indoor equipment and outdoor access point is possible through metal-coated insulation glass.
The discrete variables (DV) time-frequency (TF) quantum key distribution (QKD) protocol is a BB84 like protocol, which utilizes time and frequency as complementary bases. As orthogonal modulations, pulse position modulation (PPM) and frequency shift keying (FSK) are capable of transmitting several bits per symbol, i.e. per photon. However, unlike traditional binary polarization shift keying, PPM and FSK do not allow perfectly complementary bases. So information is not completely deleted when the wrong-basis filters are applied. Since a general security proof does not yet exist, we numerically assess DV-TF-QKD. We show that the secret key rate increases with a higher number of symbols per basis. Further we identify the optimal pulse relations in the two bases in terms of key rate and resistance against eavesdropping attacks.