arXiv ScienceSearch

arXiv subjects

Roman Samulyak

Publications and source records attributed to Roman Samulyak.

At least 19 recordsLinked to original sources

Collider-quality electron bunches from an all-optical plasma photoinjector

We present a novel approach for generating collider-quality electron bunches using a plasma photoinjector. The approach leverages recently developed techniques for the spatiotemporal control of laser pulses to produce a moving ionization front in a nonlinear plasma wave. The moving ionization front generates an electron bunch with a current profile that balances the longitudinal electric field of an electron beam-driven plasma wave, creating a uniform accelerating field across the bunch. Particle-in-cell (PIC) simulations of the ionization stage show the formation of an electron bunch with 220 pC charge and low emittance ($\varepsilon_x = 171$ nm rad, $\varepsilon_y = 76$ nm rad). Quasistatic PIC simulations of the acceleration stage show that the bunch is efficiently accelerated to 24 GeV over 2-meters with a final energy spread of less than 1% and emittances of $\varepsilon_x = 189$ nm rad and $\varepsilon_y = 80$ nm rad. This high-quality electron bunch meets the requirements outlined by the Snowmass process for intermediate-energy colliders and compares favorably to the beam quality of proposed and existing accelerator facilities. The results establish the feasibility of plasma photoinjectors for future collider applications making a significant step towards the realization of high-luminosity, compact accelerators for particle physics research.

physics.acc-ph

Lagrangian particle simulation of hydrogen pellets and SPI into runaway electron beam in ITER

Numerical studies of the ablation of pellets and shattered pellet injection (SPI) fragments into a runaway electron beam in ITER have been performed using a time-dependent pellet ablation code [R. Samulyak at el., Nucl Fusion, 61 (4), 046007 (2021)]. The code resolves detailed ablation physics near pellet fragments and large-scale expansion of ablated clouds. The study of a single fragment ablation quantifies the influence of various factors, in particular the impact ionization by runaway electrons and cross-field transport models, on the dynamics of ablated plasma and its penetration into the runaway beam. Simulations of SPI performed using different numbers of pellet fragments study the formation and evolution of ablation clouds and their large-scale dynamics in ITER. The penetration depth of ablation clouds is found to be of the order of 50 cm.

physics.plasm-ph

Computational Model for Granular Flows based on the Lagrangian Particle Method

A numerical model and parallel software for 3D simulations of granular flows have been developed based on the Lagrangian particle (LP) method [R.Samulyak, X. Wang, H.-C. Chen, Lagrangian particle method for compressible fluid dynamics, J. Comput. Phys. 362 (2018) 1-19], originally developed for compressible hydrodynamic flows, including free surface / multiphase problems. LP uses local polynomial least square fittings on particle-based stencils that ensure numerical convergence to the prescribed order. The granular flow model implements continuum equations with a $\mu(I)$-rheology closure that is capable of describing two-directional transitions of the flow between various regimes characterized by solid-, liquid-, and gas-like features. The granular flow code has been parallelized for distributed memory supercomputers and validated by comparing 3D simulations to experimental data on the collapse of granular columns. Numerical simulations showing the granular flow transition to a gas-like regime have also been presented.

physics.comp-ph

Massively-Parallel Lagrangian Particle Code and Applications

Massively-parallel, distributed-memory algorithms for the Lagrangian particle hydrodynamic method [R. Samulyak, X. Wang, H.-C. Chen, Lagrangian particle method for compressible fluid dynamics, J. Comput. Phys., 362 (2018), 1-19] have been developed, verified, and implemented. The key component of parallel algorithms is a particle management module that includes a parallel construction of octree databases, dynamic adaptation and refinement of octrees, and particle migration between parallel subdomains. The particle management module is based on the p4est (parallel forest of k-trees) library. The massively-parallel Lagrangian particle code has been applied to a variety of fundamental science and applied problems. A summary of Lagrangian particle code applications to the injection of impurities into thermonuclear fusion devices and to the simulation of supersonic hydrogen jets in support of laser-plasma wakefield acceleration projects has also been presented.

physics.comp-ph

Efficient numerical algorithm for multi-level ionization of high-atomic-number gases

An efficient numerical algorithm for the laser driven multi-level ionization of high-atomic-number gases is proposed and implemented in an electromagnetic particle-in-cell code SPACE. The algorithm is based on analytical solutions to the system of differential equations describing ionization evolution. Using analytical solutions resolves the multiscale issue of ionization due to different characteristic time scales of ionization processes and the main code time step. Algorithm efficiency is improved by using a locally-reduced system of differential equations. The effects of the orbital quantum numbers and their projections have been examined. The algorithm is applied to the study of ionization injection of electrons into laser-driven plasma wakefields.

physics.plasm-ph

SPACE: 3D Parallel Solvers for Vlasov-Maxwell and Vlasov-Poisson Equations for Relativistic Plasmas with Atomic Transformations

A parallel, relativistic, three-dimensional particle-in-cell code SPACE has been developed for the simulation of electromagnetic fields, relativistic particle beams, and plasmas. In addition to the standard second-order Particle-in-Cell (PIC) algorithm, SPACE includes efficient novel algorithms to resolve atomic physics processes such as multi-level ionization of plasma atoms, recombination, and electron attachment to dopants in dense neutral gases. SPACE also contains a highly adaptive particle-based method, called Adaptive Particle-in-Cloud (AP-Cloud), for solving the Vlasov-Poisson problems. It eliminates the traditional Cartesian mesh of PIC and replaces it with an adaptive octree data structure. The code's algorithms, structure, capabilities, parallelization strategy and performances have been discussed. Typical examples of SPACE applications to accelerator science and engineering problems are also presented.

physics.comp-ph

Near-field simulations of pellet ablation for disruptions mitigation in tokamaks

Detailed numerical studies of the ablation of a single neon pellet in the plasma disruption mitigation parameter space have been performed. Simulations were carried out using FronTier, a hydrodynamic and low magnetic Reynolds number MHD code with explicit tracking of material interfaces. FronTier's physics models resolve the pellet surface ablation and the formation of a dense, cold cloud of ablated material, the deposition of energy from hot plasma electrons passing through the ablation cloud, expansion of the ablation cloud along magnetic field lines and the radiation losses. A local thermodynamic equilibrium model based on Saha equations has been used to resolve atomic processes in the cloud and Redlich-Kwong corrections to the ideal gas equation of state for cold and dense gases have been used near the pellet surface. The FronTier pellet code is the next generation of the code described in [R. Samulyak, T. Lu, P. Parks, Nuclear Fusion, (47) 2007, 103--118]. It has been validated against the semi-analytic improved Neutral Gas Shielding model in the 1D spherically symmetric approximation. Main results include quantification of the influence of atomic processes and Redlich-Kwong corrections on the pellet ablation in spherically symmetric approximation and verification of analytic scaling laws in a broad range of pellet and plasma parameters. Using axially symmetric MHD simulations, properties of ablation channels and the reduction of pellet ablation rates in magnetic fields of increasing strength have been studied. While the main emphasis has been given to neon pellets for the plasma disruption mitigation, selected results on deuterium fueling pellets have also been presented.

physics.comp-ph

Evolution of the self-injection process in the transition of an LWFA from self-modulation to blowout regime

Long wavelength infrared (LWIR) laser driven plasma wakefield accelerators are investigated here in the self-modulated laser wakefield acceleration (SM-LWFA) and blowout regimes using 3D Particle-in-Cell simulations. The simulation results show that in SM-LWFA regime, self-injection arises with wave breaking, whereas in the blowout regime, self-injection is not observed under the simulation conditions. The wave breaking process in SM-LWFA regime occurs at a field strength that is significantly below the 1D wave-breaking threshold. This process intensifies at higher laser power and plasma density and is suppressed at low plasma densities ($\leq 1\times10^{17}$ $cm^{-3}$ here). The produced electrons show spatial modulations with a period matching that of the laser wavelength, which is a clear signature of direct laser acceleration (DLA).

physics.plasm-ph

Simulation Study of the Influence of Experimental Variations on the Structure and Quality of Plasma Liners

Simulation studies of a section of a spherically imploding plasma liner, formed by the merger of six hypersonic plasma jets, have been performed at conditions relevant to the Plasma Liner Experiment (PLX) [S. C. Hsu et al., IEEE Trans. Plasma Sci.~{\bf 46}, 1951 (2018)]. The main aim of simulations was the sensitivity study of the detailed structure of plasma liners and their global properties to experimental mass variations and timing jitter across the six plasma jets. Experimentally observable synthetic quantities have been computed using simulation data and compared with the available experimental data. Simulations predicted that the primary oblique shock wave structure is preserved at small experimental variations. At later phases of the liner implosion, primary shocks and, especially, secondary shocks are more sensitive to experimental variations. These conclusions follow from the simulation data as well as comparisons between synthetic and experimental interferometry and visible images. Small displacements of the shock wave structures may cause significant changes in the synthetic interferometer data at early time. Our studies also showed that the global properties of the plasma liners (averaged Mach number and averaged ram pressure along leading edges of plasma liners) are not very sensitive to experimental variations. Simulation data of the liner structure were largely confirmed by the PLX experimental data.

physics.plasm-ph

Simulation of beam-induced plasma in gas-filled rf cavities

Processes occurring in a radio-frequency (rf) cavity, filled with high pressure gas and interacting with proton beams, have been studied via advanced numerical simulations. Simulations support the experimental program on the hydrogen gas-filled rf cavity in the Mucool Test Area (MTA) at Fermilab, and broader research on the design of muon cooling devices. SPACE, a 3D electromagnetic particle-in-cell (EM-PIC) code with atomic physics support, was used in simulation studies. Plasma dynamics in the rf cavity, including the process of neutral gas ionization by proton beams, plasma loading of the rf cavity, and atomic processes in plasma such as electron-ion and ion-ion recombination and electron attachment to dopant molecules, have been studied. Through comparison with experiments in the MTA, simulations quantified several uncertain values of plasma properties such as effective recombination rates and the attachment time of electrons to dopant molecules. Simulations have achieved very good agreement with experiments on plasma loading and related processes. The experimentally validated code SPACE is capable of predictive simulations of muon cooling devices.

physics.acc-ph

Simulation of plasma loading of high-pressure RF cavities

Muon beam-induced plasma loading of radio-frequency (RF) cavities filled with high pressure hydrogen gas with 1% dry air dopant has been studied via numerical simulations. The electromagnetic code SPACE, that resolves relevant atomic physics processes, including ionization by the muon beam, electron attachment to dopant molecules, and electron-ion and ion-ion recombination, has been used. Simulations studies have been performed in the range of parameters typical for practical muon cooling channels.

physics.acc-ph

Lagrangian Particle Method for Compressible Fluid Dynamics

A new Lagrangian particle method for solving Euler equations for compressible inviscid fluid or gas flows is proposed. Similar to smoothed particle hydrodynamics (SPH), the method represents fluid cells with Lagrangian particles and is suitable for the simulation of complex free surface / multiphase flows. The main contributions of our method, which is different from SPH in all other aspects, are (a) significant improvement of approximation of differential operators based on a polynomial fit via weighted least squares approximation and the convergence of prescribed order, (b) an upwinding second-order particle-based algorithm with limiter, providing accuracy and long term stability, (c) elimination of the dependence on artificial parameters such as the smoothening length in SPH, causing difficulties in the case of large density changes, and (d) accurate resolution of states at free interfaces. Numerical verification test demonstrating the convergence order are presented as well as examples of complex free surface flows.

math.NA

AP-Cloud: Adaptive Particle-in-Cloud Method for Optimal Solutions to Vlasov-Poisson Equation

We propose a new adaptive Particle-in-Cloud (AP-Cloud) method for obtaining optimal numerical solutions to the Vlasov-Poisson equation. Unlike the traditional particle-in-cell (PIC) method, which is commonly used for solving this problem, the AP-Cloud adaptively selects computational nodes or particles to deliver higher accuracy and efficiency when the particle distribution is highly non-uniform. Unlike other adaptive techniques for PIC, our method balances the errors in PDE discretization and Monte Carlo integration, and discretizes the differential operators using a generalized finite difference (GFD) method based on a weighted least square formulation. As a result, AP-Cloud is independent of the geometric shapes of computational domains and is free of artificial parameters. Efficient and robust implementation is achieved through an octree data structure with 2:1 balance. We analyze the accuracy and convergence order of AP-Cloud theoretically, and verify the method using an electrostatic problem of a particle beam with halo. Simulation results show that the AP-Cloud method is substantially more accurate and faster than the traditional PIC, and it is free of artificial forces that are typical for some adaptive PIC techniques.

math.NA

On Stability of Targets for Plasma Jet Induced Magnetoinertial Fusion

The compression and stability of plasma targets for the plasma jet-induced magneto-inertial fusion (PJMIF) have been investigated via large scale simulations using the FronTier code capable of explicit tracking of material interfaces. In the PJMIF concept, a plasma liner, formed by the merger of a large number of radial, highly supersonic plasma jets, implodes on a magnetized plasma target and compresses it to conditions of the fusion ignition. A multi-stage computational approach for simulations of the liner-target interaction and the compression of plasma targets has been developed to minimize computing time. Simulations revealed important features of the target compression process, including instability and disintegration of targets. The non-uniformity of the leading edge of the liner, caused by plasma jets as well as oblique shock waves between them, leads to instabilities during the target compression. By using front tracking, the evolution of targets has been studied in 3-dimensional simulations. Optimization studies of target compression with different number of jets have also been performed.

physics.comp-ph

Transonic ablation flow regimes of high-Z pellets

In this letter, we report results of numerical studies of the ablation of argon and neon pellets in tokamaks and compare them with theoretical predictions and studies of deuterium pellets. Results demonstrate the influence of atomic physics processes on the pellet ablation process.

physics.plasm-ph

An Embedded Boundary Method for Two Phase Incompressible Flow

We develop an embedded boundary method (EBM) to solve the two-phase incompressible flow with piecewise constant density. The front tracking method is used to track the interface. The fractional step methods are used to solve the incompressible Navier-Stokes equations while the EBM is used in the projection step to solve an elliptic interface problem for the pressure with a jump equal to the surface tension force across the interface. Several examples are used to verify the accuracy of the method.

math.NA

New mathematical models for particle flow dynamics

A new class of integro-partial differential equation models is derived for the prediction of granular flow dynamics. These models are obtained using a novel limiting averaging method (inspired by techniques employed in the derivation of infinite-dimensional dynamical systems models) on the Newtonian equations of motion of a many-particle system incorporating widely used inelastic particle-particle force formulas. By using Taylor series expansions, these models can be approximated by a system of partial differential equations of the Navier-Stokes type. The exact or approximate governing equations obtained are far from simple, but they are less complicated than most of the continuum models now being used to predict particle flow behavior. Solutions of the new models for granular flows down inclined planes and in vibrating beds are compared with known experimental and analytical results and good agreement is obtained.

nlin.CD