arXiv subjects

Roman Mykhailyshyn

Publications and source records attributed to Roman Mykhailyshyn.

9 recordsLinked to original sources

arXiv2026

Vortex-Induced Torque in Grasping Soft Objects: Influence of Geometry and Pneumatic Parameters

Vortex grippers are commonly integrated into automated systems for handling objects with complex geometries in packaging, sorting, and assembling. However, their interaction with compliant objects remains difficult to predict, particularly with respect to the vortex-induced torque transmitted during grasping. This study investigates vortex-induced torque during the grasping of compliant objects and quantifies the coupled effects of supply pressure, tangential nozzle diameter, surface geometry, and curvature. The results show that increasing the tangential nozzle diameter primarily enhances the sensitivity of the generated torque to supply pressure rather than producing a uniformly higher torque. Surface geometry also strongly influences the rotational interaction, with dome-concave surfaces generally producing substantially greater torque than corresponding dome-convex surfaces, whereas the difference between cylindrical concave and convex surfaces is comparatively small. The strongest and most repeatable response was observed for a dome-concave surface exhibiting favorable object-gripper geometric matching. Among the evaluated machine-learning regression methods, Gaussian Process Regression provided the best overall predictive performance under repeated cross-validation, demonstrating that vortex-induced torque can be estimated from combined pneumatic and geometric parameters. These findings provide a basis for predicting and utilizing vortex-induced torque in the dexterous manipulation of soft objects.

cs.RO↗

arXiv2026

TOAST: Stochastic Robot Action Tokenization for Autoregressive Vision-Language-Action Models

Autoregressive Vision-Language-Action models often represent continuous robot actions as discrete token sequences, enabling action prediction with standard next-token objectives. FAST has substantially improved this representation by compactly encoding action containing diverse temporal frequencies into relatively few tokens. However, while such compression reduces the number of action tokens required for autoregressive prediction, it does not necessarily improve the efficiency of policy learning from limited demonstrations. In particular, FAST typically assigns a single deterministic tokenization to each quantized action sequence, although multiple token sequences can represent and decode to the same robot motion. We investigate whether exploiting this representational redundancy can improve policy learning. In this paper, we propose TOkenization of Action sequences with STochastic sampling (TOAST), a stochastic action tokenization method that samples alternative tokenizations of the same quantized action sequence during policy training. This diversifies the discrete supervision while preserving the underlying robot action and requires no additional demonstrations. Experiments on LIBERO show that TOAST consistently improves over its deterministic counterpart, with the improvement increasing as training data decreases, achieving a 6.8 point gain in success rate when only 1/16 of training data is available. Across four real-robot manipulation tasks, TOAST further improves mean success rate by 15.8 points over the deterministic counterpart. These results demonstrate the effectiveness of stochastic action tokenization for autoregressive robot policy learning, particularly when training data are limited.

cs.RO↗

arXiv2026

Self-Supervised Anchoring of Fingertip Sensing to Proprioception and Proactive Actions for Robot Imitation Learning

Robotic imitation learning often relies on external cameras, yet local interaction cues such as object proximity, contact onset, and grasp state are difficult to observe near the fingertips because of occlusion and limited temporal resolution. We study how to effectively incorporate complementary fingertip sensing into imitation learning using pressure-sensitive tactile and reflective proximity sensors, along with pretrained sensor encoders. The two modalities provide information at different manipulation phases: proximity sensing is informative before contact, whereas tactile sensing becomes informative after contact. However, naively adding these signals to a policy does not consistently improve performance and can even underperform vision-only policies, suggesting that sparse, phase-dependent sensor signals are difficult to exploit from limited demonstrations. We therefore propose a proprioception-anchored pretraining method, PROprioceptive-and-PRoactive Anchoring (PROPRA), which independently aligns each fingertip sensor history with proprioceptive and action segments. This provides a continuously available sensorimotor reference, allowing each sensor to be aligned independently during its informative phases. Experiments on real-world manipulation tasks show that our pretraining method improves average success rates over vision-only policies and image-anchored pretraining baselines. Representation analysis further shows that it preserves richer information about pre-contact states, enabling more effective use of complementary fingertip sensing. Please refer to our project page: https://tomohiromotoda.github.io/nia.propra/

cs.RO↗

arXiv2026

Improving Imitation Learning Efficiency for Manipulation through Geometric Prior Pretraining

Applying an imitation learning policy to a new manipulation task usually requires collecting new demonstrations and retraining the model, which makes sample efficiency a practical concern. Pretraining on large-scale robot datasets is effective in this respect, but such datasets are costly to collect and train on, while data augmentation techniques typically require a new round of data generation and retraining for each task. A complementary question is what useful prior can be provided to a policy at negligible cost before any task-specific data are collected. In this study, we construct a geometric visual pretraining dataset in which each scene contains only a plane, an object, and a hand, and trajectories are generated automatically. The scenes contain neither textures nor backgrounds; pretraining primarily exposes the policy to the geometric relationship between the hand and the object. Furthermore, representing the hand as a cube avoids tailoring the dataset to a specific robot morphology. We evaluate this geometric prior using ACT on three simulated robots across five manipulation tasks each, as well as on three real-world robot tasks. Across many of these robot--task combinations, fine-tuning from the geometric prior achieves higher success rates in the early stages of training than training from scratch while using only a small number of task demonstrations. These results suggest that even highly simplified geometric scenes can provide a useful initialization that transfers across robots and to real-world tasks when task data are limited.

cs.RO↗

arXiv2026

ARTiS: An Adaptive Robotic Gripper for Enhanced Tool Manipulation in Disassembly Applications

Grasping and holding tools while using them presents a considerable challenge not only for robots but also for humans. Such a challenge is particularly noticeable in processes involving assembly and disassembly, where efficiency and consistency depend on performing rapidly adaptive tasks. Nonetheless, contemporary robotic grasping technologies that can securely manipulate tools during operation frequently have significant constraints. In this paper, introduce ARTiS (Adaptive Robotic Tool Gripper in Disassembly Systems), a novel gripper that combines the adaptability of soft grippers, the dexterity of anthropomorphic hands, and the robustness of rigid mechanisms with a soft palm and fingertips. This unique combination makes it possible to hold tools securely in a variety of situations through using active jamming in the palm and fin-ray adaptation in fingertips. Furthermore, high finger dexterity is achieved through the seven degrees of freedom design, which enables the fingertips to orient to any surface, both for automated solutions and collaborative tasks. A comprehensive evaluation was conducted using a range of conventional disassembly tools to assess the gripper's compliance, durability, and functional versatility. More information, hardware instructions, and videos at https://romanmykhailyshyn.github.io/artis/

cs.RO↗

arXiv2026

Peg-in-Bench: A Modular Benchmark for High-Precision Robotic Insertion

High-precision insertion remains a fundamental challenge in robotic manipulation due to the strict alignment requirements and contact-rich interactions involved. Although peg-in-hole tasks are widely used for evaluation, existing bench- marks often rely on fixed task configurations, limiting their ability to assess robustness and generalization across different insertion scenarios. This paper introduces a reconfigurable peg-in-hole benchmark designed to evaluate task generalization in high-precision insertion. The benchmark consists of a set of fully 3D-printable modular components, including multiple peg geometries, tolerance levels, and configurable base structures that can be combined to generate a large variety of insertion and assembly tasks. By varying object layouts, orientations, and task structures while maintaining controlled physical conditions, the benchmark enables systematic evaluation of adaptation to unseen scenarios. To support reproducibility, we additionally provide a scenario generation tool capable of producing standardized task configurations and machine-readable task descriptions. The scenario generation tool and the STL files of the benchmark pieces are available through the project repository: https://github.com/aistairc/peg-in-bench.

cs.RO↗

arXiv2025

A Flexible Field-Based Policy Learning Framework for Diverse Robotic Systems and Sensors

We present a cross robot visuomotor learning framework that integrates diffusion policy based control with 3D semantic scene representations from D3Fields to enable category level generalization in manipulation. Its modular design supports diverse robot camera configurations including UR5 arms with Microsoft Azure Kinect arrays and bimanual manipulators with Intel RealSense sensors through a low latency control stack and intuitive teleoperation. A unified configuration layer enables seamless switching between setups for flexible data collection training and evaluation. In a grasp and lift block task the framework achieved an 80 percent success rate after only 100 demonstration episodes demonstrating robust skill transfer between platforms and sensing modalities. This design paves the way for scalable real world studies in cross robotic generalization.

cs.RO↗

arXiv2025

Low-Contact Grasping of Soft Tissue with Complex Geometry using a Vortex Gripper

Soft tissue manipulation is an integral aspect of most surgical procedures; however, the vast majority of surgical graspers used today are made of hard materials, such as metals or hard plastics. Furthermore, these graspers predominately function by pinching tissue between two hard objects as a method for tissue manipulation. As such, the potential to apply too much force during contact, and thus damage tissue, is inherently high. As an alternative approach, gaspers developed using a pneumatic vortex could potentially levitate soft tissue, enabling manipulation with low or even no contact force. In this paper, we present the design and well as a full factorial study of the force characteristics of the vortex gripper grasping soft surfaces with four common shapes, with convex and concave curvature, and ranging over 10 different radii of curvature, for a total of 40 unique surfaces. By changing the parameters of the nozzle elements in the design of the gripper, it was possible to investigate the influence of the mass flow parameters of the vortex gripper on the lifting force for all of these different soft surfaces. An $\pmb{ex}$ $\pmb{vivo}$ experiment was conducted on grasping biological tissues and soft balls of various shapes to show the advantages and disadvantages of the proposed technology. The obtained results allowed us to find limitations in the use of vortex technology and the following stages of its improvement for medical use.

cs.RO↗

arXiv2025

Dexterous Manipulation of Deformable Objects via Pneumatic Gripping: Lifting by One End

Manipulating deformable objects in robotic cells is often costly and not widely accessible. However, the use of localized pneumatic gripping systems can enhance accessibility. Current methods that use pneumatic grippers to handle deformable objects struggle with effective lifting. This paper introduces a method for the dexterous lifting of textile deformable objects from one edge, utilizing a previously developed gripper designed for flexible and porous materials. By precisely adjusting the orientation and position of the gripper during the lifting process, we were able to significantly reduce necessary gripping force and minimize object vibration caused by airflow. This method was tested and validated on four materials with varying mass, friction, and flexibility. The proposed approach facilitates the lifting of deformable objects from a conveyor or automated line, even when only one edge is accessible for grasping. Future work will involve integrating a vision system to optimize the manipulation of deformable objects with more complex shapes.

cs.RO↗