arXiv subjects

Roberto Car

Publications and source records attributed to Roberto Car.

At least 19 recordsLinked to original sources

arXiv2026

Temperature-Induced Reorganization of Supported Zn$_3$ Clusters on Cu(111): From Minimum-Energy Structures to Finite-Temperature Ensembles

Understanding the nature of catalytic active sites under reaction conditions remains a central challenge in heterogeneous catalysis. In industrial copper/zinc oxide/alumina catalysts for methanol synthesis, small Zn-based species at the Cu interface have long been proposed as active-site candidates, yet their atomic-scale structure and stability remain controversial. Computational studies typically identify such species from optimized 0 K structures, assuming that minimum-energy configurations remain representative under reaction conditions. Here, we combine machine-learning-interatomic-potential-accelerated global optimization, molecular dynamics, and enhanced-sampling free-energy calculations to investigate supported Zn$_3$(OH)$_3$ and Zn$_3$(OH)$_2$CHOO clusters on Cu(111)-based surfaces from 0 to 450 K. While compact triangular configurations are generally favored among minimum-energy structures at 0 K, finite-temperature free-energy calculations reveal a pronounced shift toward extended linear configurations with increasing temperature. This transition is driven primarily by entropic stabilization and cannot be inferred from potential energies alone. Molecular dynamics further shows substantial cluster mobility on pristine Cu(111), indicating that long-term persistence depends not only on configurational stability but also on surface mobility. Surface Zn alloying strongly suppresses diffusion, thereby stabilizing isolated interfacial Zn species. Together, these results show that thermodynamically relevant structures of supported Zn-based clusters can differ fundamentally from static 0 K predictions because of competing enthalpic and entropic effects. Our findings highlight the limitations of identifying catalytic active sites solely from 0 K structures and underscore the importance of explicit finite-temperature sampling in catalyst modeling.

cond-mat.mtrl-sci↗

arXiv2026

From Bulk to Surface: Structure and Dynamics of Amorphous Alumina from Deep Potential Molecular Dynamics

Understanding the atomic-scale structure and dynamics of amorphous oxide surfaces is essential for interpreting their chemical reactivity, mechanical stability, and interfacial behavior, yet direct experimental characterization remains challenging. We employ Deep Potential (DP) molecular dynamics to generate large-scale, ab initio-quality models of amorphous Al$_2$O$_3$ bulk glasses and melt-quenched free surfaces, enabling a quantitative analysis of both structure and relaxation dynamics with statistical confidence inaccessible to direct ab initio simulation. The trained DP model reproduces experimental liquid and glass structure, captures the cooling-rate dependence of the bulk glass transition, and corrects systematic biases in the polyhedral populations predicted by widely used classical force fields. At the free surface, mass density recovers to bulk values over ~10 $\unicode{x212B}$, while local coordination requires a slightly wider subsurface region to fully converge. The outermost layer is oxygen-enriched, exhibits altered polyhedral connectivity with contracted Al-O bonds, and hosts a broad population of under-coordinated motifs (notably AlO$_3$ and OAl$_2$) whose abundances are governed by glass stability. These reactive Lewis acid and Br$\unicode{x00F8}$nsted base sites are locally paired in a manner consistent with bond-valence compensation, yet remain spatially dispersed rather than aggregating into extended clusters. Despite this pronounced structural heterogeneity, the surface relaxes on the same timescale as the bulk and exhibits a comparable glass transition temperature, suggesting that the disordered surface is kinetically stable once formed. Together, these results establish a molecular-level picture of amorphous alumina surfaces and demonstrate the capability of machine-learned potentials to resolve structure-property relationships in disordered oxide interfaces.

cond-mat.mtrl-sci↗

arXiv2026

Hyperuniformity of Weighted Particle Systems

Hyperuniform particle arrangements are characterized by a local number variance that grows more slowly than the volume of the observation window. We generalize this concept to describe particle systems in which particles carry weights: internal degrees of freedom such as scalars, vectors, pseudovectors, directors, tensors, or extrinsic local attributes. Our generalization extends hyperuniformity from fluctuations in particle positions to fluctuations in the spatial distribution of weights. We derive generalized weighted pair correlation, autocovariance, and spectral functions, and show their relation to the local variance in weighted many-particle systems. Applying this formalism to bond-orientational ordered phases, dipolar liquid water, Voronoi-cell volumes, and certain ionic liquids, we demonstrate that hyperuniformity in the particle system does not necessarily translate to hyperuniformity of the weighted system. In fact, cases exist where a hyperuniform particle system becomes antihyperuniform when weighted, and others where nonhyperuniform or antihyperuniform particle systems yield hyperuniform weighted systems. This theoretical framework provides a road map for quantifying large-scale fluctuations in weighted many-particle systems, offering a powerful tool for identifying systems with novel physical properties.

cond-mat.stat-mech↗

arXiv2026

fix pimd/langevin: An Efficient Implementation of Path Integral Molecular Dynamics in LAMMPS

Path integral molecular dynamics (PIMD), which maps a quantum particle onto a fictitious classical system of ring polymers and propagates the "beads" of this extended classical system using molecular dynamics, is widely used to capture nuclear quantum effects (NQEs) in molecular simulations. Accurate PIMD calculations typically require a large number of beads and are therefore computationally demanding. While software packages such as i-PI offer comprehensive PIMD functionality, the high efficiency of simulations driven by machine learning interatomic potentials, such as Deep Potential (DP), calls for more efficient PIMD implementations that fully exploit modern massively parallel supercomputers. Here we present fix pimd/langevin, an efficient PIMD implementation in LAMMPS that supports commonly used features and leverages the Message Passing Interface architecture of LAMMPS to achieve high computational efficiency. We demonstrate the usage and validate the correctness of our code using liquid water as a representative example, and provide a comprehensive overview of the supported features. Then we discuss several important technical aspects of the implementation. Using DP simulations of water as a benchmark, we show that our implementation achieves several-fold acceleration compared to i-PI. Finally, we report strong and weak scaling results that demonstrate the favorable parallel performance of our code.

physics.chem-ph↗

arXiv2025

Ab Initio Melting Properties of Water and Ice from Machine Learning Potentials

Liquid water exhibits several important anomalous properties in the vicinity of the melting temperature ($T_{\mathrm{m}}$) of ice Ih, including a higher density than ice and a density maximum at 4~$^{\circ}$C. Experimentally, an isotope effect on $T_{\mathrm{m}}$ is observed: the melting temperature of H$_2$O is approximately 4~K lower than that of D$_2$O. This difference can only be explained by nuclear quantum effects (NQEs), which can be accurately captured using path integral molecular dynamics (PIMD). Here we run PIMD simulations driven by Deep Potential (DP) models trained on data from density functional theory (DFT) based on SCAN, revPBE0-D3, SCAN0, and revPBE-D3 and a DP model trained on the MB-pol potential. We calculate the \tm of ice, the density discontinuity at melting, and the temperature of density maximum ($T_{\mathrm{dm}}$) of the liquid. We find that the model based on MB-pol agrees well with experiment. The models based on DFT incorrectly predict that NQEs lower $T_{\mathrm{m}}$. For the density discontinuity, SCAN and SCAN0 predict values close to the experimental result, while revPBE-D3 and revPBE0-D3 significantly underestimate it. Additionally, the models based on SCAN and SCAN0 correctly predict that the $T_{\mathrm{dm}}$ is higher than $T_{\mathrm{m}}$, while those based on revPBE-D3 and revPBE0-D3 predict the opposite. We attribute the deviations of the DFT-based models from experiment to the overestimation of hydrogen bond strength. Our results set the stage for more accurate simulations of aqueous systems grounded on DFT.

physics.chem-ph↗

arXiv2025

Assessment of First-Principles Methods in Modeling the Melting Properties of Water

First-principles simulations have played a crucial role in deepening our understanding of the thermodynamic properties of water, and machine learning potentials (MLPs) trained on these first-principles data widen the range of accessible properties. However, the capabilities of different first-principles methods are not yet fully understood due to the lack of systematic benchmarks, the underestimation of the uncertainties introduced by MLPs, and the neglect of nuclear quantum effects (NQEs). Here, we systematically assess first-principles methods by calculating key melting properties using path integral molecular dynamics (PIMD) driven by Deep Potential (DP) models trained on data from density functional theory (DFT) with SCAN, revPBE0-D3, SCAN0 and revPBE-D3 functionals, as well as from the MB-pol potential. We find that MB-pol is in qualitatively good agreement with the experiment in all properties tested, whereas the four DFT functionals incorrectly predict that NQEs increase the melting temperature. SCAN and SCAN0 slightly underestimate the density change between water and ice upon melting, but revPBE-D3 and revPBE0-D3 severely underestimate it. Moreover, SCAN and SCAN0 correctly predict that the maximum liquid density occurs at a temperature higher than the melting point, while revPBE-D3 and revPBE0-D3 predict the opposite behavior. Our results highlight limitations in widely used first-principles methods and call for a reassessment of their predictive power in aqueous systems.

physics.chem-ph↗

arXiv2025

Benchmarking Universal Machine Learning Interatomic Potentials for Supported Nanoparticles: Decoupling Energy Accuracy from Structural Exploration

Supported nanoparticle catalysts are widely used in the chemical industry. Computational modeling of supported nanoparticles based on density functional theory (DFT) often involves structural searches of stable local minimum energy configurations and molecular dynamics simulations at finite temperature. These are computationally demanding tasks that are intractable within DFT for large systems. In the last two decades, machine learning interatomic potentials (MLIPs) have been successfully used to substantially increase the size and time scales accessible to simulations approximating DFT accuracy. However, training reliable MLIPs is non-trivial as it requires many costly DFT calculations. Recently, several universal MLIPs (uMLIPs) have been developed, which are trained on large datasets that cover a wide range of molecules and materials. Here, we benchmark the accuracy and the efficiency of these uMLIPs in describing Cu nanoparticles supported on Al$_2$O$_3$ surfaces against our domain-specific DP-UniAlCu model. We find that the MACE-OMAT can reproduce reasonably well the low-energy structures found in global optimization at an energy accuracy comparable to DP-UniAlCu. Interestingly, the MatterSim-v1.0.0-1M model, which exhibits larger deviations in the binding energies, can find even more stable configurations than the other two models in some supported nanoparticle sizes, showing its capability in structure exploration. For MD simulations, MACE-OMAT and MatterSim-v1.0.0-1M can qualitatively reproduce the mean-squared displacements of Cu atoms (MSD$_\mathrm{Cu}$) predicted by DP-UniAlCu, albeit at roughly two orders of magnitude higher cost. We demonstrate that the uMLIPs can be very useful in simulating supported nanoparticles even without any fine-tuning, though their reduced efficiency remains a limiting factor for large-scale simulations.

cond-mat.mtrl-sci↗

arXiv2025

A Machine Learning Model for the Chemistry of a Solvated Electron

In molecular simulations, machine-learning force fields can achieve ab initio accuracy at a lower cost but remain limited in the explicit modeling of electrons. In this work, we develop an electron-aware machine-learning force field, in which an excess electron of interest is modeled quantum mechanically, while the remaining short-range interactions and long-range Coulombic forces are machine-learned to reproduce a density functional theory calculation. We demonstrate the method on the solvated electron in bulk water and its reaction with a hydronium ion. We identify a proton transfer mechanism by which the excess proton recombines with the electron. We determine the forward reaction rates between 350 K and 450 K from first-passage survival functions, which yield an Arrhenius relationship with an activation energy of 3.2 kcal$\cdot$mol$^{-1}$, in good agreement with experiment. From an enhanced sampling simulation, we determine the equilibrium constant, and thus the reaction free energy, which is also consistent with experimental measurements.

physics.chem-ph↗

arXiv2025

Spectral Similarity Masks Structural Diversity at Hydrophobic Water Interfaces

The air-water and graphene-water interfaces represent quintessential examples of the liquid-gas and liquid-solid boundaries, respectively. While the sum-frequency generation (SFG) spectra of these interfaces exhibit certain similarities, a consensus on their signals and interpretations has yet to be reached. Leveraging deep learning, we accessed fully first-principles SFG spectra for both systems, addressing recent experimental discrepancies. Despite both interfaces exhibiting microscopically hydrophobic characteristics, our findings reveal that similarities in SFG signals do not translate into comparable interfacial microscopic properties. Instead, graphene-water and air-water interfaces exhibit fundamental differences in SFG-active thicknesses, hydrogen-bonding networks, and dynamic diffusion behavior. These distinctions underscore the stronger confinements imposed by the solid-liquid interface compared with the weaker constraints of the gas-liquid interface.

physics.comp-ph↗

arXiv2025

On the possibility of chiral symmetry breaking in liquid hydrogen peroxide

Molecular chirality is a key concept in chemistry with implications for the origin of life and the manufacturing of pharmaceuticals. Previous simulations of a chiral molecular model with an energetic bias towards homochiral interactions show a spontaneous symmetry-breaking transition from a supercritical racemic liquid into a subcritical liquid enriched in one of the two enantiomers. Here, we employ molecular dynamics simulations in order to test the possible existence of this phenomenon in hydrogen peroxide, the smallest chiral molecule. For this purpose, we study the fluid phase of this substance between 100 K and 1500 K, and from $10^{-4}$ GPa to 1 GPa. We find a glass transition and we suggest that hydrogen bonds play a central role in such behavior. We also test the possibility of observing chiral symmetry breaking by performing both constant temperature and cooling simulations at multiple pressures, and we do not observe the phenomenon. An analysis of the structure of the liquid shows negligible differences between homochiral and heterochiral interactions, supporting the difficulty in observing chiral symmetry breaking. If hydrogen peroxide manifests spontaneous chiral symmetry breaking, it likely takes place significantly below room temperature and is hidden by other phenomena, such as the glass transition or crystallization. More broadly, our results, and recent experimental observations, suggest that greater molecular complexity is needed for spontaneous chiral symmetry breaking in the liquid phase to occur.

cond-mat.stat-mech↗

arXiv2025

Dynamic Metal-Support Interaction Dictates Cu Nanoparticle Sintering on Al$_2$O$_3$ Surfaces

Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model for Cu nanoparticles on three Al$_2$O$_3$ surfaces ($\gamma$-Al$_2$O$_3$(100), $\gamma$-Al$_2$O$_3$(110), and $\alpha$-Al$_2$O$_3$(0001)). Using DP-accelerated simulations, we reveal striking facet-dependent nanoparticle stability and mobility patterns across the three surfaces. The nanoparticles diffuse several times faster on $\alpha$-Al$_2$O$_3$(0001) than on $\gamma$-Al$_2$O$_3$(100) at 800 K while expected to be more sluggish based on their larger binding energy at 0 K. Diffusion is facilitated by dynamic metal-support interaction (MSI), where the Al atoms switch out of the surface plane to optimize contact with the nanoparticle and relax back to the plane as the nanoparticle moves away. In contrast, the MSI on $\gamma$-Al$_2$O$_3$(100) and on $\gamma$-Al$_2$O$_3$(110) is dominated by more stable and directional Cu-O bonds, consistent with the limited diffusion observed on these surfaces. Our extended long-time MD simulations provide quantitative insights into the sintering processes, showing that the dispersity of nanoparticles (the initial inter-nanoparticle distance) strongly influences coalescence driven by nanoparticle diffusion. We observed that the coalescence of Cu$_{13}$ nanoparticles on $\alpha$-Al$_2$O$_3$(0001) can occur in a short time (10 ns) at 800 K even with an initial inter-nanoparticle distance increased to 30 \r{A}, while the coalescence on $\gamma$-Al$_2$O$_3$(100) is inhibited significantly by increasing the initial inter-nanoparticle distance from 15 \r{A} to 30 \r{A}. These findings demonstrate that the dynamics of the supporting surface is crucial to understanding the sintering mechanism and offer guidance for designing sinter-resistant catalysts by engineering the support morphology.

cond-mat.mtrl-sci↗

arXiv2024

Thermal disorder and phonon softening in the ferroelectric phase transition of lead titanate

We report a molecular dynamics study of ab initio quality of the ferroelectric phase transition in crystalline PbTiO3. We model anharmonicity accurately in terms of potential energy and polarization surfaces trained on density functional theory data with modern machine learning techniques. Our simulations demonstrate that the transition has a strong order-disorder character, in agreement with diffraction experiments, and provide fresh insight into the approach to equilibrium across the phase transition. We find that the emergence and disappearance of the macroscopic polarization is driven by dipolar switching at the nanometer scale. We also computed the infrared optical absorption spectra in both the ferroelectric and the paraelectric phases, finding good agreement with the experimental Raman frequencies. Often, the almost ideal displacive character of the soft mode detected by Raman scattering in the paraelectric phase has been contrasted with the order-disorder character of the transition suggested by diffraction experiments. We settle this issue by showing that the soft mode coexists with a strong Debye relaxation associated with thermal disordering of the dipoles. The Debye relaxation feature is centered at zero frequency and appears near the transition temperature in both the ferroelectric and the paraelectric phases.

cond-mat.mtrl-sci↗

arXiv2024

Deuteration removes quantum dipolar defects from KDP crystals

The structural, dielectric, and thermodynamic properties of the hydrogen-bonded ferroelectric crystal potassium dihydrogen phosphate ($\mathbf{KH_2PO_4}$), KDP for short, differ significantly from those of DKDP ($\mathbf{KD_2PO_4}$). It is well established that deuteration affects the interplay of hydrogen-bond switches and heavy ion displacements that underlie the emergence of macroscopic polarization, but a detailed microscopic model is missing. Here we show that all-atom path integral molecular dynamics simulations can predict the isotope effects, revealing the microscopic mechanism that differentiates KDP and DKDP. Proton tunneling in the hydrogen bonds generates phosphate configurations that do not contribute to the polarization. These dipolar defects are always present in KDP, but disappear at low temperatures in DKDP, which behaves more classically. Quantum disorder confers residual entropy to ferroelectric KDP, explaining its lower spontaneous polarization and transition entropy relative to DKDP. Tunneling should also contribute to the anomalous heat capacity observed in KDP near absolute zero. The prominent role of quantum fluctuations in KDP is related to the unusual strength of the hydrogen bonds in this system and should be equally important in the other crystals of the KDP family, which exhibit similar isotope effects.

physics.comp-ph↗

arXiv2024

Enhanced Deep Potential Model for Fast and Accurate Molecular Dynamics; Application to the Hydrated Electron

In molecular simulations, neural network force fields aim at achieving \emph{ab initio} accuracy with reduced computational cost. This work introduces enhancements to the Deep Potential network architecture, integrating a message-passing framework and a new lightweight implementation with various improvements. Our model achieves accuracy on par with leading machine learning force fields and offers significant speed advantages, making it well-suited for large-scale, accuracy-sensitive systems. We also introduce a new iterative model for Wannier center prediction, allowing us to keep track of electron positions in simulations of general insulating systems. We apply our model to study the solvated electron in bulk water, an ostensibly simple system that is actually quite challenging to represent with neural networks. Our trained model is not only accurate, but can also transfer to larger systems. Our simulation confirms the cavity model, where the electron's localized state is observed to be stable. Through an extensive run, we accurately determine various structural and dynamical properties of the solvated electron.

physics.comp-ph↗

arXiv2024

Electrical double layer and capacitance of TiO2 electrolyte interfaces from first principles simulations

The electrical double layer (EDL) at aqueous solution-metal oxide interfaces critically affects many fundamental processes in electrochemistry, geology and biology, yet understanding its microscopic structure is challenging for both theory and experiments. Here we employ ab initio-based machine learning potentials including long-range electrostatics in large-scale atomistic simulations of the EDL at the TiO2-electrolyte interface. Our simulations provide a molecular-scale picture of the EDL that demonstrates the limitations of standard mean-field models. We further develop a method to accurately calculate the electrostatic potential drop at the interface. The computed capacitance originating from the adsorbed charges and the potential drop agrees with experiments, supporting the reliability of our description of the EDL. The larger interfacial capacitance of basic relative to acidic solutions originates from the higher affinity of the cations for the oxide surface and gives rise to distinct charging mechanisms on negative and positive surfaces.

physics.chem-ph↗

arXiv2024

Quantum effects in the H-bond symmetrization and in the thermodynamic properties of high pressure ice

We investigate the structural and thermodynamic properties of high-pressure ice by incorporating quantum anharmonicity at a non-perturbative level. Quantum fluctuations reduce the critical pressure of the phase transition between phase VIII (with asymmetric H-bonds) and phase X (with symmetric H-bonds) by 65 GPa from its classical value of 116 GPa at 0K. Moreover, quantum effects make it temperature-independent over a wide temperature range (0K-300K), in agreement with experimental estimates obtained through vibrational spectroscopy and in striking contrast to the strong temperature dependence found in the classical approximation. The equation of state shows fingerprints of the transition in accordance with experimental evidence. Additionally, we demonstrate that, within our approach, proton disorder in phase VII has a negligible impact on the occurrence of phase X. Finally, we reproduce with high accuracy the 10 GPa isotope shift due to the hydrogen-to-deuterium substitution.

cond-mat.other↗

arXiv2023

Critical behavior in a chiral molecular model

Understanding the condensed-phase behavior of chiral molecules is important in biology, as well as in a range of technological applications, such as the manufacture of pharmaceuticals. Here, we use molecular dynamics simulations to study a chiral four-site molecular model that exhibits a second-order symmetry-breaking phase transition from a supercritical racemic liquid, into subcritical D-rich and L-rich liquids. We determine the infinite-size critical temperature using the fourth-order Binder cumulant, and we show that the finite-size scaling behavior of the order parameter is compatible with the 3D Ising universality class. We also study the spontaneous D-rich to L-rich transition at a slightly subcritical temperature $T\approx0.985 T_c$ and our findings indicate that the free energy barrier for this transformation increases with system size as $N^{2/3}$ where $N$ is the number of molecules, consistent with a surface-dominated phenomenon. The critical behavior observed herein suggests a mechanism for chirality selection in which a liquid of chiral molecules spontaneously forms a phase enriched in one of the two enantiomers as the temperature is lowered below the critical point. Furthermore, the increasing free energy barrier with system size indicates that fluctuations between the L-rich and D-rich phases are suppressed as the size of the system increases, trapping it in one of the two enantiomerically-enriched phases. Such a process could provide the basis for an alternative explanation for the origin of biological homochirality. We also conjecture the possibility of observing nucleation at subcritical temperatures under the action of a suitable chiral external field.

cond-mat.stat-mech↗

arXiv2023

A first-principles machine-learning force field for heterogeneous ice nucleation on microcline feldspar

The formation of ice in the atmosphere affects precipitation and cloud properties, and plays a key role in the climate of our planet. Although ice can form directly from liquid water at deeply supercooled conditions, the presence of foreign particles can aid ice formation at much warmer temperatures. Over the past decade, experiments have highlighted the remarkable efficiency of feldspar minerals as ice nuclei compared to other particles present in the atmosphere. However, the exact mechanism of ice formation on feldspar surfaces has yet to be fully understood. Here, we develop a first-principles machine-learning model for the potential energy surface aimed at studying ice nucleation at microcline feldspar surfaces. The model is able to reproduce with high fidelity the energies and forces derived from density-functional theory (DFT) based on the SCAN exchange and correlation functional. We apply the machine-learning force field to study different fully-hydroxylated terminations of the (100), (010), and (001) surfaces of microcline exposed to vacuum. Our calculations suggest that terminations that do not minimize the number of broken bonds are preferred in vacuum. We also study the structure of supercooled liquid water in contact with microcline surfaces, and find that water density correlations extend up to around 1 nm from the surfaces. Finally, we show that the force field maintains a high accuracy during the simulation of ice formation at microcline surfaces, even for large systems of around 30,000 atoms. Future work will be directed towards the calculation of nucleation free energy barriers and rates using the force field developed herein, and understanding the role of different microcline surfaces on ice nucleation.

cond-mat.mtrl-sci↗