arXiv subjects

Roberto Capote

Publications and source records attributed to Roberto Capote.

At least 19 recordsLinked to original sources

arXiv2026

Catapult neutrons from neck snapping in fission

Dynamical fission calculations show that the post-scission configurations resemble two collinear pear-shaped fragments whose juxtaposed surface bulges subside relatively quickly, as the fragments acquire smoother shapes. The associated rapid speed of the healing bulge surface may boost nucleons in the fragment to energies sufficient for emission. The present study explores this mechanism by following the fate of nucleons that are reflected off the inwards moving bulge surface. The simulations suggest that the mechanism may produce high-energy neutrons at the level of a few per cent.

nucl-th↗

arXiv2024

Measurement of Spectrum Averaged Cross Sections in LR-0 Benchmark Reference Neutron Field

The measured and evaluated excitation functions are fundamental quantities that affect the accuracy of all calculations in nuclear applications. Some cross sections, such as 14N(n,p)14C, have added value for special applications, as these reactions may be responsible for possible contamination in industrial processes such as spent fuel reprocessing. For the validation of the evaluated cross sections, we can rely on the comparison of the calculated spectrum averaged cross sections (SACS) for the given neutron spectrum with the measured SACS value. The benchmark reference neutron field has been identified, characterized, and well validated in the LR-0 special core. A very large set of SACS measurements in the LR0 reference field is measured with low uncertainty, making it an excellent set for deconvolution codes validation. The impact of the gamma-induced reaction on the production yield of neutron-induced reactions was investigated for most of the benchmarked reactions. Gamma competition was found to contribute at most 1% for the 197Au(n,2n) reaction, while being substantially lower for other target isotopes and neutron-induced activation reactions.

nucl-ex↗

arXiv2023

How to explain ENDF-6 to computers: A formal ENDF format description language

The ENDF-6 format, widely used worldwide for storing and disseminating nuclear data, is managed by the Cross Sections Evaluation Working Group (CSEWG) and fully documented in the ENDF-6 formats manual. This manual employs a combination of formal and natural language, introducing the possibility of ambiguity in certain parts of the format specification. To eliminate the possibility of ambiguity, this contribution proposes a generalization of the formal language used in the ENDF-6 formats manual, which is precisely defined in extended Backus-Naur form (EBNF). This formalization also offers several other advantages, notably reducing the complexity of creating and updating parsing and validation programs for ENDF-6 formatted files. Moreover, the availability of a formal description enables the automatic mapping of the low-level ENDF-6 representation, provided by a sequence of numbers, to a more human-friendly hierarchical representation with variable names. Demonstrating these advantages, almost the entire ENDF-6 format description has been translated into the proposed formal language, accompanied by a reference implementation of a parser/translator. This implementation leverages the formal format specification to enable reading, writing, and validating ENDF-6 formatted files.

nucl-th↗

arXiv2023

Benchmarking of stainless steel cube neutron leakage in Research Center Rez

The integral experiments covering the neutron leakage from geometrically simple assemblies with a 252Cf source inside are very valuable tools usable in validation of transport cross section data, since geometric uncertainties play a much smaller role in simple geometric assemblies than in complex assemblies as for example reactor pressure vessel geometry. Since 252Cf(s.f.) is standard neutron source, the uncertainties connected with the source neutron spectrum can be even neglected. The paper refers on validation efforts of neutron leakage from stainless steel block ~50 x 50 x50 cm in Research Center Rez. Both the neutron leakage flux at a distance of 1 m from the center of the cubical assembly using stilbene spectrometry and the activation rates at different positions of the assembly were evaluated. In addition to experiments, main sources of uncertainty were identified and evaluated. The results of the stilbene measurements are consistent with the activation measurements results.

physics.ins-det↗

arXiv2023

Impact of Reactor Neutron Spectrum on Measured Spectrum Averaged Cross Sections

The cross section averaged over 235U thermal-neutron induced fission spectrum is a fundamental quantity that can be used in evaluation and validation of nuclear data. Many experiments focused on the determination of Spectrum Averaged Cross Sections (SACS) in 235U(nth,f). Prompt Fission Neutron Spectrum (PFNS) in light water reactors using enriched uranium fuel. In these reactors, there is already some amount of water moderator between the uranium fuel and the irradiated sample. Due to the decrease of hydrogen cross-section with neutron energy, the high energy tail of the reactor spectrum in cores with water moderator may be harder than the pure PFNS. This paper aims to compare the shape of the actual reactor spectrum in various core positions of a research light-water reactor differing each from other by the effective water thickness. The spectrum shape is determined both by calculations and experimentally using various high energy threshold reactions. The impact of the photo-nuclear reactions ({\gamma},n) competing with (n,2n) in production of the same residual nucleus was shown to be less than a percent for most of studied dosimeters. An important exception was found for 197Au(n,2n) 196Au dosimeter irradiated in the outcore channel where a notable photo-neutron contribution to the production of 196Au is caused by the neutron production from the high energy {\gamma}-rays from thermal-neutron capture in 54Fe. The corresponding ENDF/B-VIII.0 data turned out to underestimate such {\gamma}-yield by 40% in comparison with ENDF/B-VI.8. This has improved but however not resolved the disagreement between our measurement and calculations. The remaining deficiency was attributed to the underestimation of the evaluated cross section IAEA/PD-2019 for the 197Au({\gamma},n) cross section near the reaction threshold. The later was confirmed by comparison with existing measured data.

nucl-ex↗

arXiv2023

The effect of heavy reflector on neutronic parameters of core

The reactor baffle is an important component of a nuclear reactor that fixes the location of the fuel assembly in the reactor core. The main types of baffles are called light or heavy. The light baffle has mostly the form of steel plates with outer space filled by water, and the heavy baffle is mostly a forged steel element. Both concepts have advantages as well as disadvantages. In the case of the light baffle, one does not need to solve the issue of void swelling, but the neutron economy is not ideal, while the heavy baffle has a good neutron economy, but void swelling is an issue. This paper deals with the effect of the heavy VVER-1000 baffle on criticality. Criticality was measured using a well-defined core composed of 6 fuel assemblies moved to a simulator of the VVER-1000 internals, which is located at the LR-0 reactor. The experiments confirm the fact that the water filling the cooling channels in the baffle has a strong neutron absorbing effect. The keff calculated using the ENDF/B-VIII.0 library significantly underpredicts the experiment, whereas calculations using a new evaluation of 56Fe by the IAEA (INDEN collaboration) give a better agreement. Generally, the presented results are suitable for validation of iron cross sections.

physics.ins-det↗

arXiv2023

The methodology for validation of cross sections in quasi monoenergetic neutron field

Dosimetry cross sections are fundamental quantities essential in determination of neutron fluences in points of interest in technologies under heavy radiation load. The most common is their application to Reactor Pressure Vessel aging management, relating to correct estimation of its residual lifetime. The neutron spectrum in various reactor positions has a similar character as the fission spectrum. Due to this fact, the validation of the neutron dosimetry cross sections in reactor fields, or in a very well-known neutron field of 252Cf(s.f.) is sufficient for ensuring their validity in estimations of neutron fluxes in reactor physics. With an increasing field of applications, as in neutron dosimetry in accelerator-based fields or space applications, requests occurred on detailed validation in spectra different from fission ones. This paper presents the testing of a new methodology for the use of quasi monoenergetic neutron fields, where different sensitivity allows validations of the cross-section in different energy regions than in the fission spectrum. The exact shape of the neutron spectrum in the tested fields is determined by stilbene spectrometry and corrected to scattering by calculation, where applicable. The total flux is determined from Ni and Al flux monitors. The evaluated neutron flux in the target set of activation foils is used for calculation of theoretical reaction rate, which is compared with the experimental value determined from gamma activity. This kind of comparison can be understood as validation. It is worth noting, this methodology applied to the IRDFF-II library shows satisfactory agreement for selected reactions.

physics.ins-det↗

arXiv2023

Validation of IRDFF-II library in VR-1 reactor field using thin targets

Cross section data are fundamental quantities which affect the accuracy of all calculations in nuclear applications. A new dosimetry library IRDFF-II that contains cross section evaluations with full uncertainty quantification was developed by the International Atomic Energy Agency and released in January 2020 (https://www-nds.iea.org/IRDFF). A previous version, IRDFF-1.05, was released in 2014 and experimental validation of the newly released cross section by spectrum averaged cross section (SACS) measurements is a high priority task. For such purpose, a neutron dosimeter set containing 5 target foils was activated in 2 independent experiments at the VR-1 reactor of the Czech Technical University in Prague. Care was taken to derive SACS with low uncertainties. New experimental evaluation method is in good agreement with previous approaches based on relative measurements using monitor foils. Good agreement of measured SACS and evaluated IRDFF-II cross sections is observed. Slight overestimation of evaluated ENDF/B-VIII.0 235U(nth,f) PFNS above 10 MeV is discussed.

nucl-ex↗

arXiv2023

Spectrum averaged cross section measurements of lutetium using standard 252Cf neutron source

The spectrum averaged cross section (SACS) in standard neutron field is a preferable tool for cross section validation. There are very few measurements involving lutetium neutron cross sections. The presented work uses only neutron standard, i.e., 252Cf(sf) neutron field, for validation of lutetium threshold cross sections. SACS were inferred from gamma spectrometry derived reaction rates. The SACS which were derived include 175Lu(n,2n)174Lu, 175Lu(n,3n)173Lu, 175Lu(n,p)175Yb, and 176Lu(n,n)176m1Lu reactions. All these reactions SACS were measured for the first time. MCNP6 calculations using JEFF-3.3 or ENDF/B-VIII.0 libraries for lutetium cross sections were compared with experimental data. The agreement was found very poor for all reactions under study. Thus there is a need for their improvement. The presented data can be also used for validation of the various theoretical models.

nucl-ex↗

arXiv2021

Nuclear data evaluation with Bayesian networks

Bayesian networks are graphical models to represent the probabilistic relationships between variables in the Bayesian framework. The knowledge of all variables can be updated using new information about some of the variables. We show that relying on the Bayesian network interpretation enables large scale inference and gives flexibility in incorporating prior assumptions and constraints into the nuclear data evaluation process, such as sum rules and the non-negativity of cross sections. The latter constraint is accounted for by a non-linear transformation and therefore we also discuss inference in Bayesian networks with non-linear relationships. Using Bayesian networks, the evaluation process yields detailed information, such as posterior estimates and uncertainties of all statistical and systematic errors. We also elaborate on a sparse Gaussian process construction compatible with the Bayesian network framework that can for instance be used as prior on energy-dependent model parameters, model deficiencies and energy-dependent systematic errors of experiments. We present three proof-of-concept examples that emerged in the context of the neutron data standards project and in the ongoing international evaluation efforts of $^{56}$Fe. In the first example we demonstrate the modelization and explicit estimation of relative energy-dependent error components of experimental datasets. Then we show an example evaluation using the outlined Gaussian process construction in an evaluation of $^{56}$Fe in the energy range between one and two MeV, where R-Matrix and nuclear model fits are difficult. Finally, we present a model-based evaluation of $^{56}$Fe between 5 MeV and 30 MeV with a sound treatment of model deficiencies. The R scripts to reproduce the Bayesian network examples and the nucdataBaynet package for Bayesian network modeling and inference have been made publicly available.

physics.data-an↗

arXiv2020

Conception and software implementation of a nuclear data evaluation pipeline

We discuss the design and software implementation of a nuclear data evaluation pipeline applied for a fully reproducible evaluation of neutron-induced cross sections of $^{56}$Fe above the resolved resonance region using the nuclear model code TALYS combined with relevant experimental data. The emphasis is on the mathematical and technical aspects of the pipeline and not on the evaluation of $^{56}$Fe, which is tentative. The mathematical building blocks combined and employed in the pipeline are discussed in detail. A unified representation of experimental data, systematic and statistical errors, model parameters and defects enables the application of the Generalized Least Squares (GLS) and its natural extension, the Levenberg-Marquardt (LM) algorithm, on a large collection of experimental data. The LM algorithm tailored to nuclear data evaluation accounts for the exact non-linear physics model to determine best estimates of nuclear quantities. Associated uncertainty information is derived from a Taylor expansion at the maximum of the posterior distribution. We also discuss the pipeline in terms of its IT (=information technology) building blocks, such as those to efficiently manage and retrieve experimental data of the EXFOR library and to distribute computations on a scientific cluster. Relying on the mathematical and IT building blocks, we elaborate on the sequence of steps in the pipeline to perform the evaluation, such as the retrieval of experimental data, the correction of experimental uncertainties using marginal likelihood optimization (MLO) and after a screening of thousand TALYS parameters -- including Gaussian process priors on energy dependent parameters -- the fitting of about 150 parameters using the LM algorithm. The code of the pipeline including a manual and a Dockerfile for a simplified installation is available at www.nucleardata.com.

physics.data-an↗

arXiv2005

Higher Landau levels contribution to the energy of interacting electrons in a quantum dot

Properly regularized second-order degenerate perturbation theory is applied to compute the contribution of higher Landau levels to the low-energy spectrum of interacting electrons in a disk-shaped quantum dot. At ``filling factor'' near 1/2, this contribution proves to be larger than energy differences between states with different spin polarizations. After checking convergence of the method in small systems, we show results for a 12-electron quantum dot, a system which is hardly tractable by means of exact diagonalization techniques.

cond-mat.mes-hall↗

arXiv2002

Discontinuities in the level density of small quantum dots under strong magnetic fields

Exact diagonalization studies of the level density in a six-electron quantum dot under magnetic fields around 7 T (``filling factor'' around 1/2) are reported. In any spin-polarization channel, two regimes are visible in the dot excitation spectrum: one corresponding to interacting quasiparticles (i.e. composite fermions) for excitation energies below 0.4 meV, and a second one for energies above 0.4 meV, in which the level density (exponentially) increases at the same rate as in the non-interacting composite-fermion model.

cond-mat.mes-hall↗

arXiv2001

Far infrared giant dipole resonances in neutral quantum dots

A resonance behaviour of the far infrared absorption probability at a frequency \sim N^{1/4} is predicted for clusters of N electron-hole pairs (2\le N\le 110) confined in disk-shaped quantum dots. For radially symmetric dots, the absorption is dominated by a Giant Dipole Resonance, which accounts for more than 98 % of the energy-weighted photoabsorption sum rule.

cond-mat.mes-hall↗

arXiv2001

A general numerical solution of dispersion relations for the nuclear optical model

A general numerical solution of the dispersion integral relation between the real and the imaginary parts of the nuclear optical potential is presented. Fast convergence is achieved by means of the Gauss-Legendre integration method, which offers accuracy, easiness of implementation and generality for dispersive optical model calculations. The use of this numerical integration method in the optical-model parameter search codes allows for a fast and accurate dispersive analysis. PACS number(s): 11.55.Fv, 24.10.Ht, 02.60.Jh

nucl-th↗

arXiv2001

Vertical magneto-tunneling through a quantum dot and the density of states of small electronic systems

One-electron tunneling through a quantum dot with a strong magnetic field in the direction of the current is studied. The linear magneto-conductance is computed for a model parabolic dot with seven electrons in the intermediate states and for different values of the magnetic field. It is shown that the dot density of states at low excitation energies can be extracted from a precise measurement of the conductance at the upper edge of the Coulomb blockade diamond. We parametrized the density of states with a single ``temperature'' parameter (in the so called ``constant temperature approximation''), and found that this parameter depends very weakly on the magnetic field.

cond-mat.mes-hall↗

arXiv2001

Pigmy resonances in artificial nuclei: far-infrared absorption by electron-hole droplets

The structure of E1 resonances is examined in a microscopic random phase approximation calculation for neutral, symmetric, closed shell, electron-hole systems in a quantum dot. The number of electron-hole pairs, N, is varied from 6 to 42. The ocurrence of small, but distinct, E1 peaks in the far infrared spectra located in the low energy tail of the giant dipole resonance and consisting of highly coherent electron-hole excitations is predicted. These pigmy resonances account for about 2 % of the dipole energy-weighted photoabsorption sum rule. A very weak dependence of the average pigmy resonance energy on the number of electron-hole pairs is found.

cond-mat.str-el↗

arXiv1999

Crossover between the Dense Electron-Hole Phase and the BCS Excitonic Phase in Quantum Dots

Second order perturbation theory and a Lipkin-Nogami scheme combined with an exact Monte Carlo projection after variation are applied to compute the ground-state energy of $6\le N\le 210$ electron-hole pairs confined in a parabolic two-dimensional quantum dot. The energy shows nice scaling properties as N or the confinement strength is varied. A crossover from the high-density electron-hole phase to the BCS excitonic phase is found at a density which is roughly four times the close-packing density of excitons.

cond-mat.mes-hall↗