arXiv subjects

Robert W. Heath

Publications and source records attributed to Robert W. Heath.

14 recordsLinked to original sources

arXiv2026

Finite-SNR Closed Form for the Square Mar\v{c}enko-Pastur MIMO Capacity

For the canonical independent and identically distributed (IID) single-user multiple-input multiple-output (MIMO) channel with full channel state information at the transmitter (CSIT), the asymptotic capacity per receive antenna is a waterfilling integral over the Mar\v{c}enko-Pastur law, whose shape depends only on the ratio of transmit to receive antennas. Closed forms are known for every ratio other than the square one, and there only above a finite signal-to-noise ratio (SNR). The square ratio behaves differently because the Mar\v{c}enko-Pastur support reaches the origin. The waterfilling cutoff then stays strictly inside the support at every finite SNR, and the water level has been available only numerically. This letter closes that gap with a classical trigonometric parametrization of the square law, which removes the edge singularity and replaces the moving cutoff by a single angle. Both the SNR and the capacity become explicit functions of that angle, so the capacity curve is traced by sweeping the angle rather than by solving a scalar constraint at each operating point. The same parametrization delivers the low-SNR behavior in closed form, where the slope of capacity in SNR equals the upper edge of the limiting spectrum.

cs.IT↗

arXiv2026

Guided Wireless Technology for Near-Field Communication

Guided wireless technology is an innovative approach that combines the strengths of guided waves and wireless communication. In traditional wireless systems, signals propagate through the air, where they are vulnerable to interference, attenuation, and jamming. Guided communication, in contrast, confines signals within a physical medium, significantly reducing interference and supporting higher data rates over longer distances. Guided wireless technology harnesses these benefits by creating guided wireless channels and offering a controlled pathway for electromagnetic waves. This work harnesses these benefits by focusing on the modeling of near-field communication through long connected arrays deployed in linear-cell environments. We derive a circuit model for long array as an infinitely long dipole with multiple periodic feed points before approximating it with a finite array through open circuiting. Through our simulations, we show how the standing wave phenomenon is confirmed by the oscillations in spectral efficiency. We also demonstrate the capability of the LMMSE transmit beamformer in mitigating interference and minimizing the mean square error by adaptively allocating more power to the user experiencing the most severe channel attenuation, resulting in a more balanced variation of achievable rates across users.

cs.IT↗

arXiv2025

Achieving Tighter Finite-Time Rates for Heterogeneous Federated Stochastic Approximation under Markovian Sampling

Motivated by collaborative reinforcement learning (RL) and optimization with time-correlated data, we study a generic federated stochastic approximation problem involving $M$ agents, where each agent is characterized by an agent-specific (potentially nonlinear) local operator. The goal is for the agents to communicate intermittently via a server to find the root of the average of the agents' local operators. The generality of our setting stems from allowing for (i) Markovian data at each agent and (ii) heterogeneity in the roots of the agents' local operators. The limited recent work that has accounted for both these features in a federated setting fails to guarantee convergence to the desired point or to show any benefit of collaboration; furthermore, they rely on projection steps in their algorithms to guarantee bounded iterates. Our work overcomes each of these limitations. We develop a novel algorithm titled \texttt{FedHSA}, and prove that it guarantees convergence to the correct point, while enjoying an $M$-fold linear speedup in sample-complexity due to collaboration. To our knowledge, \emph{this is the first finite-time result of its kind}, and establishing it (without relying on a projection step) entails a fairly intricate argument that accounts for the interplay between complex temporal correlations due to Markovian sampling, multiple local steps to save communication, and the drift-effects induced by heterogeneous local operators. Our results have implications for a broad class of heterogeneous federated RL problems (e.g., policy evaluation and control) with function approximation, where the agents' Markov decision processes can differ in their probability transition kernels and reward functions.

cs.LG↗

arXiv2024

Next-slot OFDM-CSI Prediction: Multi-head Self-attention or State Space Model?

The ongoing fifth-generation (5G) standardization is exploring the use of deep learning (DL) methods to enhance the new radio (NR) interface. Both in academia and industry, researchers are investigating the performance and complexity of multiple DL architecture candidates for specific one-sided and two-sided use cases such as channel state estimation (CSI) feedback, CSI prediction, beam management, and positioning. In this paper, we set focus on the CSI prediction task and study the performance and generalization of the two main DL layers that are being extensively benchmarked within the DL community, namely, multi-head self-attention (MSA) and state-space model (SSM). We train and evaluate MSA and SSM layers to predict the next slot for uplink and downlink communication scenarios over urban microcell (UMi) and urban macrocell (UMa) OFDM 5G channel models. Our numerical results demonstrate that SSMs exhibit better prediction and generalization capabilities than MSAs only for SISO cases. For MIMO scenarios, however, the MSA layer outperforms the SSM one. While both layers represent potential DL architectures for future DL-enabled 5G use cases, the overall investigation of this paper favors MSAs over SSMs.

cs.IT↗

arXiv2023

From Multilayer Perceptron to GPT: A Reflection on Deep Learning Research for Wireless Physical Layer

Most research studies on deep learning (DL) applied to the physical layer of wireless communication do not put forward the critical role of the accuracy-generalization trade-off in developing and evaluating practical algorithms. To highlight the disadvantage of this common practice, we revisit a data decoding example from one of the first papers introducing DL-based end-to-end wireless communication systems to the research community and promoting the use of artificial intelligence (AI)/DL for the wireless physical layer. We then put forward two key trade-offs in designing DL models for communication, namely, accuracy versus generalization and compression versus latency. We discuss their relevance in the context of wireless communications use cases using emerging DL models including large language models (LLMs). Finally, we summarize our proposed evaluation guidelines to enhance the research impact of DL on wireless communications. These guidelines are an attempt to reconcile the empirical nature of DL research with the rigorous requirement metrics of wireless communications systems.

cs.IT↗

arXiv2022

Super-Wideband Massive MIMO

We present a unified model for connected antenna arrays with a large number of tightly integrated (i.e., coupled) antennas in a compact space within the context of massive multiple-input multiple-output (MIMO) communication. We refer to this system as tightly-coupled massive MIMO. From an information-theoretic perspective, scaling the design of tightly-coupled massive MIMO systems in terms of the number of antennas, the operational bandwidth, and form factor was not addressed in prior art. We investigate this open research problem using a physically consistent modeling approach for far-field (FF) MIMO communication based on multi-port circuit theory. In doing so, we turn mutual coupling (MC) from a foe to a friend of MIMO systems design, thereby challenging a basic percept in antenna systems engineering that promotes MC mitigation/compensation. We show that tight MC widens the operational bandwidth of antenna arrays thereby unleashing a missing MIMO gain that we coin "bandwidth gain". Furthermore, we derive analytically the asymptotically optimum spacing-to-antenna-size ratio by establishing a condition for tight coupling in the limit of large-size antenna arrays with quasi-continuous apertures. We also optimize the antenna array size while maximizing the achievable rate under fixed transmit power and inter-element spacing. Then, we study the impact of MC on the achievable rate of MIMO systems under line-of-sight (LoS) and Rayleigh fading channels. These results reveal new insights into the design of tightly-coupled massive antenna arrays as opposed to the widely-adopted "disconnected" designs that disregard MC by putting faith in the half-wavelength spacing rule.

cs.IT↗

arXiv2021

Achievable Rate of Near-Field Communications Based on Physically Consistent Models

This paper introduces a novel information-theoretic approach for studying the effects of mutual coupling (MC), between the transmit and receive antennas, on the overall performance of single-input-single-output (SISO) near-field communications. By incorporating the finite antenna size constraint using Chu's theory and under the assumption of canonical-minimum scattering, we derive the MC between two radiating volumes of fixed sizes. Expressions for the self and mutual impedances are obtained by the use of the reciprocity theorem. Based on a circuit-theoretic two-port model for SISO radio communication systems, we establish the achievable rate for a given pair of transmit and receive antenna sizes, thereby providing an upper bound on the system performance under physical size constraints. Through the lens of these findings, we shed new light on the influence of MC on the information-theoretic limits of near-field communications using compact antennas.

cs.IT↗

arXiv2021

Challenges and Opportunities of Future Rural Wireless Communications

Broadband access is key to ensuring robust economic development and improving quality of life. Unfortunately, the communication infrastructure deployed in rural areas throughout the world lags behind its urban counterparts due to low population density and economics. This article examines the motivations and challenges of providing broadband access over vast rural regions, with an emphasis on the wireless aspect in view of its irreplaceable role in closing the digital gap. Applications and opportunities for future rural wireless communications are discussed for a variety of areas, including residential welfare, digital agriculture, and transportation. This article also comprehensively investigates current and emerging wireless technologies that could facilitate rural deployment. Although there is no simple solution, there is an urgent need for researchers to work on coverage, cost, and reliability of rural wireless access.

eess.SP↗

arXiv2020

Achievable Rate with Antenna Size Constraint: Shannon meets Chu and Bode

Using ideas from Chu and Bode/Fano theories, we characterize the maximum achievable rate over the single-input single-output wireless communication channels under a restriction on the antenna size at the receiver. By employing circuit-theoretic multiport models for radio communication systems, we derive the information-theoretic limits of compact antennas. We first describe an equivalent Chu's antenna circuit under the physical realizability conditions of its reflection coefficient. Such a design allows us to subsequently compute the achievable rate for a given receive antenna size thereby providing a physical bound on the system performance that we compare to the standard size-unconstrained Shannon capacity. We also determine the effective signal-to-noise ratio (SNR) which strongly depends on the antenna size and experiences an apparent finite-size performance degradation where only a fraction of Shannon capacity can be achieved. We further determine the optimal signaling bandwidth which shows that impedance matching is essential in both narrowband and broadband scenarios. We also examine the achievable rate in presence of interference showing that the size constraint is immaterial in interference-limited scenarios. Finally, our numerical results of the derived achievable rate as function of the antenna size and the SNR reveal new insights for the physically consistent design of radio systems.

cs.IT↗

arXiv2020

Optimizing Coverage and Capacity in Cellular Networks using Machine Learning

Wireless cellular networks have many parameters that are normally tuned upon deployment and re-tuned as the network changes. Many operational parameters affect reference signal received power (RSRP), reference signal received quality (RSRQ), signal-to-interference-plus-noise-ratio (SINR), and, ultimately, throughput. In this paper, we develop and compare two approaches for maximizing coverage and minimizing interference by jointly optimizing the transmit power and downtilt (elevation tilt) settings across sectors. To evaluate different parameter configurations offline, we construct a realistic simulation model that captures geographic correlations. Using this model, we evaluate two optimization methods: deep deterministic policy gradient (DDPG), a reinforcement learning (RL) algorithm, and multi-objective Bayesian optimization (BO). Our simulations show that both approaches significantly outperform random search and converge to comparable Pareto frontiers, but that BO converges with two orders of magnitude fewer evaluations than DDPG. Our results suggest that data-driven techniques can effectively self-optimize coverage and capacity in cellular networks.

eess.SP↗

arXiv2020

DeepWiPHY: Deep Learning-based Receiver Design and Dataset for IEEE 802.11ax Systems

In this work, we develop DeepWiPHY, a deep learning-based architecture to replace the channel estimation, common phase error (CPE) correction, sampling rate offset (SRO) correction, and equalization modules of IEEE 802.11ax based orthogonal frequency division multiplexing (OFDM) receivers. We first train DeepWiPHY with a synthetic dataset, which is generated using representative indoor channel models and includes typical radio frequency (RF) impairments that are the source of nonlinearity in wireless systems. To further train and evaluate DeepWiPHY with real-world data, we develop a passive sniffing-based data collection testbed composed of Universal Software Radio Peripherals (USRPs) and commercially available IEEE 802.11ax products. The comprehensive evaluation of DeepWiPHY with synthetic and real-world datasets (110 million synthetic OFDM symbols and 14 million real-world OFDM symbols) confirms that, even without fine-tuning the neural network's architecture parameters, DeepWiPHY achieves comparable performance to or outperforms the conventional WLAN receivers, in terms of both bit error rate (BER) and packet error rate (PER), under a wide range of channel models, signal-to-noise (SNR) levels, and modulation schemes.

eess.SP↗

arXiv2018

MIMO Beampattern and Waveform Design with Low Resolution DACs

Digital beamforming and waveform generation techniques in MIMO radar offer enormous advantages in terms of flexibility and performance compared to conventional radar systems based on analog implementations. To allow for such fully digital design with an efficient hardware complexity, we consider the use of low resolution digital-to-analog converters (DACs) while maintaining a separate radio-frequency chain per antenna. A sum of squared residuals (SSR) formulation for the beampattern and spectral shaping problem is solved based on the Generalized Approximate Message Passing (GAMP) algorithm. Numerical results demonstrate good performance in terms of spectral shaping as well as cross-correlation properties of the different probing waveforms even with just 2-bit resolution per antenna.

cs.IT↗

arXiv2018

The information and wave-theoretic limits of analog beamforming

The performance of broadband millimeter-wave (mmWave) RF architectures, is generally determined by mathematical concepts such as the Shannon capacity. These systems have also to obey physical laws such as the conservation of energy and the propagation laws. Taking the physical and hardware limitations into account is crucial for characterizing the actual performance of mmWave systems under certain architecture such as analog beamforming. In this context, we consider a broadband frequency dependent array model that explicitly includes incremental time shifts instead of phase shifts between the individual antennas and incorporates a physically defined radiated power. As a consequence of this model, we present a novel joint approach for designing the optimal waveform and beamforming vector for analog beamforming. Our results show that, for sufficiently large array size, the achievable rate is mainly limited by the fundamental trade-off between the analog beamforming gain and signal bandwidth.

cs.IT↗

arXiv2017

Wireless Powered Dense Cellular Networks: How Many Small Cells Do We Need?

This paper focuses on wireless powered 5G dense cellular networks, where base station (BS) delivers energy to user equipment (UE) via the microwave radiation in sub-6 GHz or millimeter wave (mmWave) frequency, and UE uses the harvested energy for uplink information transmission. By addressing the impacts of employing different number of antennas and bandwidths at lower and higher frequencies, we evaluate the amount of harvested energy and throughput in such networks. Based on the derived results, we obtain the required small cell density to achieve an expected level of harvested energy or throughput. Also, we obtain that when the ratio of the number of sub-6 GHz BSs to that of the mmWave BSs is lower than a given threshold, UE harvests more energy from a mmWave BS than a sub-6 GHz BS. We find how many mmWave small cells are needed to perform better than the sub-6 GHz small cells from the perspectives of harvested energy and throughput. Our results reveal that the amount of harvested energy from the mmWave tier can be comparable to the sub-6 GHz counterpart in the dense scenarios. For the same tier scale, mmWave tier can achieve higher throughput. Furthermore, the throughput gap between different mmWave frequencies increases with the mmWave BS density.

cs.NI↗