arXiv subjects

Riccardo Rossi

Publications and source records attributed to Riccardo Rossi.

At least 19 recordsLinked to original sources

arXiv2026

Variational Real-Time Dynamics on Reduced Operator Manifolds

Accurate real-time simulation of correlated quantum systems remains challenging for both classical methods and near-term quantum hardware. We introduce operator-projected variational quantum real-time evolution (OVQRTE), which updates a parameterized circuit by enforcing the Ehrenfest equations for a selected set of observables. OVQRTE requires only expectation-value measurements, while the choice of operator set enables a systematic trade-off between accuracy and measurement cost, substantially reducing quantum-resource requirements relative to existing variational real-time-evolution algorithms. After implementing OVQRTE dynamics of Heisenberg model on a simulator, we benchmark the algorithm for the Anderson impurity models on the IQM Emerald superconducting processor using up to 24 qubits. We further use OVQRTE to sample computational-basis states for quantum-selected configuration interaction (QSCI), enabling the calculation of the ground-state energy and density of states within a self-consistent ghost-Gutzwiller Ansatz (gGut) embedding loop. Our results establish OVQRTE as a promising approach for investigating correlated condensed-matter systems on near-term quantum hardware.

quant-ph↗

arXiv2026

Dimensional hyperreduction of nonlinear finite element models via empirical cubature with manifold-adaptive weights

Nonlinear-manifold reduced-order models for parametrized finite element problems can achieve substantial compression both in the number of generalized (latent) coordinates and, through sampling-and-weighting hyperreduction, in the number of sampled elements/integration points. Yet current sampling-and-weighting approaches employ weights that remain fixed over the solution manifold. We contend that this restriction leaves hyperreduction potential untapped: allowing the weights to vary continuously and nonlinearly with the latent coordinates can further decrease the number of sampled spatial entities. To exploit this possibility, we propose the Manifold-Adaptive-Weight Empirical Cubature Method (MAW-ECM). Starting from a feasible fixed-weight ECM rule, a greedy pruning strategy removes sampled entities through convex quadratic weight-redistribution problems enforcing local conditions and positivity. The method is assessed on two nonlinear benchmarks: homogenization of a metamaterial unit cell exhibiting negative incremental stiffness, and a history-dependent continuum-damage problem. In both cases, the nonlinear manifold is constructed from an initial linear compression followed by an input-informed identification of the latent coordinates as general linear combinations of the retained modal amplitudes, incorporating graph information when relevant to seek the intrinsic dimensionality of the solution manifold. We show that combining the nonlinear-manifold representation with MAW-ECM reduces the number of sampled integration points by more than two orders of magnitude relative to the corresponding standard linear reduced model. Relative to the fixed-weight manifold models alone, the adaptive weights eliminate approximately 80% of the remaining points in the homogenization benchmark and more than 97% in the damage benchmark, while essentially preserving their accuracy.

math.NA↗

arXiv2026

A Fixed Universal Determinant is Variationally Complete for Continuum Fermions

How many Slater determinants does an accurate variational description of interacting fermions require? Exact expansions in a finite basis need combinatorially many, and state-of-the-art fermionic neural quantum states stack growing numbers of them. We prove that, in the norms that govern variational calculations, at most two are needed, independently of the number of particles and of the target accuracy. A single universal Slater determinant-specified in advance, independent of both the system and the state-multiplied by a smooth bosonic wave function approximates any fermionic wave function in up to three spatial dimensions in the first-order Sobolev norm, which controls the variational energy. Reaching the second-order Sobolev norm-for Coulomb interactions, the domain of the Hamiltonian, which bounds the variance of the local energy at the core of variational Monte Carlo-requires at most one additional fixed determinant, and only in three dimensions. Antisymmetry therefore costs at most two universal determinants and no expressiveness: generalized Slater-Jastrow neural quantum states are variationally complete.

cond-mat.str-el↗

arXiv2026

Variational low-energy subspaces for chemically accurate excited states

Accurate electronic excited states are essential for photochemistry, spectroscopy and non-adiabatic molecular dynamics, but high-level calculations often scale steeply and require prior knowledge of the target state's character or symmetry. Here we show that variational excited-state optimization can be reformulated as an iterated ground-state-like problem for a low-energy subspace of the electronic Hamiltonian. Applying this variational principle to non-orthogonal Slater determinants leads to EXIDOS, an automatic method for excited state calculations controlled only by the number of states and determinants per state. EXIDOS optimizes multiple excited states simultaneously, without explicit orthogonality constraints or imposed spin and point-group symmetries. Benchmarks against FCI and state-of-the-art quantum chemistry methods show chemical accuracy for a multitude of states in N$_2$ and CO, charge-transfer states in HCl, Rydberg states in NH$_3$, double excitations and extended potential-energy curves in C$_2$, and avoided crossings and conical intersections in ethylene. These results establish EXIDOS as a low-scaling, fully variational route to chemically accurate excited states.

physics.chem-ph↗

arXiv2026

MioFFAn: an Annotation Software for Formula Formalization with LLM Automation Capabilities

The automatic translation of mathematical expressions in scientific literature into executable symbolic code (a process we refer to as Formula Formalization) is hindered by a severe scarcity of high-quality, ground-truth datasets specialized for technical scientific domains. In this paper, we present MioFFAn, an open-source, document-centric, and customizable framework designed to facilitate rapid annotation for this task. Building upon the MioGatto architecture, we extend existing features to overcome structural limitations and pivot its scope by introducing specific functionalities for Formula Formalization, such as selection of equations of interest and aided symbolic code specification. By allowing users to configure custom taxonomies and properties for identified symbols, and compatible symbolic operators, we ensure the framework is adaptable to diverse specialized scientific fields. Furthermore, MioFFAn is designed to incorporate partial automation via Large Language Models. By defining a modular set of automated sub-tasks with strict output formats, we enable researchers to iteratively refine automation capabilities and evaluate competing strategies using standard NLP metrics. We specify the current automation methodology and perform a preliminary evaluation that demonstrates to efficacy of this human-in-the-loop approach.

cs.CL↗

arXiv2025

Majorana Diagrammatics for Quantum Spin-1/2 Models

A diagrammatic formalism for lattices of 1/2 is developed. It is based on an unconstrained mapping between spin and Majorana operators. This allows the use of standard tools of diagrammatic quantum many-body theory without requiring projections. We derive, in particular, the Feynman rules for the expansion around a color-preserving mean-field theory. We then present the numerical results obtained by computing the corrections up to second order for the Heisenberg model in one and two dimensions, showing that perturbative corrections are not only numerically important, but also qualitatively improve the results of mean-field theory. These results pave the way for the use of Majorana diagrammatic tools in theoretical and numerical studies of quantum spin systems.

cond-mat.str-el↗

arXiv2025

CFD simulation of a Rushton turbine stirred-tank using open-source software with critical evaluation of MRF-based rotation modeling

A critical evaluation of the impact of the Multiple Reference Frame (MRF) technique on steady RANS simulations of a Rushton turbine stirred-tanks is presented. The analysis, based on the open source software OpenFOAM, is focused on the choice of the diameter and thickness of the MRF region and on their effect on the predicted velocity field and mixing times in the tank. Five diameters of the MRF region are compared for the same operating conditions of the turbine, showing limited differences in velocity profiles, which are found in general good agreement with available experimental data. Significant differences are nonetheless found in the predicted levels of turbulence intensity within the tank, with a considerable amount of artificially generated turbulence at the boundary of the MRF region for the largest diameters. The impact of the different predictions of the turbulent field on the modeling of the mixing process in the tank is evaluated by simulating the release of a passive scalar, using the frozen-flow field hypothesis. The results show changes in mixing times up to a factor of three when comparing MRF regions of different size. Thus, the present investigation highlights the importance of assessing the effect of the MRF zone size on numerical results as a standard practice in RANS based simulations of stirred-tanks.

physics.flu-dyn↗

arXiv2025

A computational fluid dynamics model for the simulation of flashboiling flow inside pressurized metered dose inhalers

In this work we present, for the first time, a computational fluid dynamics tool for the simulation of the metered discharge in a pressurized metered dose inhaler. The model, based on open-source software, adopts the Volume-Of-Fluid method for the representation of the multiphase flow inside the device and a cavitation model to explicitly account for the onset of flashboiling upon actuation. Experimental visualizations of the flow inside the device and measurements of the mixture density and liquid and vapor flow rates at the nozzle orifice are employed to validate the model and assess the sensitivity of numerical results to modeling parameters. The results obtained for a standard device geometry show that the model is able to quantitatively predict several aspects of the dynamics and thermodynamics of the metered discharge. We conclude by showing how, by allowing to reproduce and understand the fluid dynamics upstream of the atomizing nozzle, our computational tool enables systematic design and optimization of the actuator geometry.

physics.flu-dyn↗

arXiv2025

A comprehensive theory for relativistic polaritonic chemistry: a four components ab initio treatment of molecular systems coupled to quantum fields

We present a new ab initio approach to study molecules containing heavy atoms strongly interacting with quantum fields in optical devices. The theory has been derived from the relativistic quantum electrodynamics (QED) introducing the approximations needed to provide a formalism suitable for relativistic quantum chemistry. This framework represents the ideal starting point to extend the main quantum chemistry methods to relativistic polaritonic. The Polaritonic Dirac Hartree Fock (Pol-DHF) approach is the first method we propose based on this theory. Pol-DHF allows for the simulation of field induced effects on the ground and excited state properties of heavy transition metals molecular complexes. The method is able to include not only the effects of the photons, but can in principle be extended also to include explicit interactions with positrons. Application of Pol-DHF to three metal hydrides shows that the magnitude of both polaritonic and relativistic effects can be comparable when relativistic effects are getting more important. Due to an accurate description of spin-orbit coupling, the method is able to reproduce polaritonic effects happening at the crossing between singlet and triplet potential energy surfaces.

physics.chem-ph↗

arXiv2025

Precise Quantum Chemistry calculations with few Slater Determinants

Slater determinants have underpinned quantum chemistry for nearly a century, yet their full potential has remained challenging to exploit. In this work, we show that a variational wavefunction composed of a few hundred optimized non-orthogonal determinants can achieve energy accuracies comparable to the state of the art. This is obtained by introducing an optimization method that leverages the quadratic dependence of the variational energy on the orbitals of each determinant, enabling an exact iterative optimization, and uses an efficient tensor-contraction algorithm to evaluate the effective Hamiltonian with a computational cost that scales as the fourth power of the number of basis functions. We benchmark the accuracy of the proposed method with exact full-configuration interaction results where available, and we achieve lower variational energies than coupled cluster (CCSD(T)) for several molecules in the double-zeta basis.

physics.chem-ph↗

arXiv2024

Variational Benchmarks for Quantum Many-Body Problems

The continued development of computational approaches to many-body ground-state problems in physics and chemistry calls for a consistent way to assess its overall progress. In this work, we introduce a metric of variational accuracy, the V-score, obtained from the variational energy and its variance. We provide an extensive curated dataset of variational calculations of many-body quantum systems, identifying cases where state-of-the-art numerical approaches show limited accuracy, and future algorithms or computational platforms, such as quantum computing, could provide improved accuracy. The V-score can be used as a metric to assess the progress of quantum variational methods toward a quantum advantage for ground-state problems, especially in regimes where classical verifiability is impossible.

quant-ph↗

arXiv2024

Operator-Projected Variational Quantum Imaginary Time Evolution

Variational Quantum Imaginary Time Evolution (VQITE) is a leading technique for ground state preparation on quantum computers. A significant computational challenge of VQITE is the determination of the quantum geometric tensor. We show that requiring the imaginary-time evolution to be correct only when projected onto a chosen set of operators allows to achieve a twofold reduction in circuit depth by bypassing fidelity estimations, and reduces measurement complexity from quadratic to linear in the number of parameters. We demonstrate by a simulation of the transverse-field Ising model that our algorithm achieves a several orders of magnitude improvement in the number of measurements required for the same accuracy.

quant-ph↗

arXiv2024

A machine learning based material homogenization technique for in-plane loaded masonry walls

In recent years, significant advancements have been made in computational methods for analyzing masonry structures. Within the Finite Element Method, two primary approaches have gained traction: Micro and Macro Scale modeling, and their subsequent integration via Multi-scale methods based on homogenization theory and the representative volume element concept. While Micro and Multi-scale approaches offer high fidelity, they often come with a substantial computational burden. On the other hand, calibrating homogenized material parameters in Macro-scale approaches presents challenges for practical engineering problems. Machine learning techniques have emerged as powerful tools for training models using vast datasets from various domains. In this context, we propose leveraging Machine Learning methods to develop a novel homogenization strategy for the in-plane analysis of masonry structures. This strategy involves automatically calibrating a continuum nonlinear damage constitutive law and an appropriate yield criteria using relevant data derived from Micro-scale analysis. The optimization process not only enhances material parameters but also refines yield criteria and damage evolution laws to better align with existing data. To achieve this, a virtual laboratory is created to conduct micro-model simulations that account for the individual behaviors of constituent materials. Subsequently, a data isotropization process is employed to reconcile the results with typical isotropic constitutive models. Next, an optimization algorithm that minimizes the difference of internal dissipated work between the micro and macro scales is executed. We apply this technique to the in-plane homogenization of a Flemish bond masonry wall. Evaluation examples, including simulations of shear and compression tests, demonstrate the method's accuracy compared to micro modeling of the entire structure.

cs.CE↗

arXiv2023

Exploring the impact of automated vehicles lane-changing behavior on urban network efficiency

While automated vehicle (AV) research has grown steadily in recent years, the impact of automated lane changing behavior on transportation systems remains a largely understudied topic. The present work aims to explore the effects of automated lane changing behavior on urban network efficiency as the penetration rate of AVs increases. To the best of the authors knowledge, this represents the first attempt to do so by isolating the effects of the lane changing behavior; this was obtained by considering AVs with automated lateral control, yet retaining the same longitudinal control characteristics of conventional vehicles (CV). An urban road network located in Hannover, Germany, was modeled with the microsimulation software SUMO, and several scenarios were analyzed, starting from a baseline with only CVs and then progressively increasing the AV penetration rate with 10% increments. Results highlight a modest, but statistically significant, decrease in system performance, with travel times increasing, and average speed and network capacity decreasing, as penetration rates increase. This was likely caused by a more prudent behavior of AVs, which accepted larger gaps than CVs when performing lane changing maneuvers.

eess.SY↗

arXiv2023

Learning ground states of gapped quantum Hamiltonians with Kernel Methods

Neural network approaches to approximate the ground state of quantum hamiltonians require the numerical solution of a highly nonlinear optimization problem. We introduce a statistical learning approach that makes the optimization trivial by using kernel methods. Our scheme is an approximate realization of the power method, where supervised learning is used to learn the next step of the power iteration. We show that the ground state properties of arbitrary gapped quantum hamiltonians can be reached with polynomial resources under the assumption that the supervised learning is efficient. Using kernel ridge regression, we provide numerical evidence that the learning assumption is verified by applying our scheme to find the ground states of several prototypical interacting many-body quantum systems, both in one and two dimensions, showing the flexibility of our approach.

quant-ph↗

arXiv2023

Variational Quantum Time Evolution without the Quantum Geometric Tensor

The real- and imaginary-time evolution of quantum states are powerful tools in physics, chemistry, and beyond, to investigate quantum dynamics, prepare ground states or calculate thermodynamic observables. On near-term devices, variational quantum time evolution is a promising candidate for these tasks, as the required circuit model can be tailored to trade off available device capabilities and approximation accuracy. However, even if the circuits can be reliably executed, variational quantum time evolution algorithms quickly become infeasible for relevant system sizes due to the calculation of the Quantum Geometric Tensor (QGT). In this work, we propose a solution to this scaling problem by leveraging a dual formulation that circumvents the explicit evaluation of the QGT. We demonstrate our algorithm for the time evolution of the Heisenberg Hamiltonian and show that it accurately reproduces the system dynamics at a fraction of the cost of standard variational quantum time evolution algorithms. As an application of quantum imaginary-time evolution, we calculate a thermodynamic observable, the energy per site, of the Heisenberg model.

quant-ph↗

arXiv2023

Before-after safety analysis of a shared space implementation

Shared spaces aim to reduce the dominance of motor vehicles by promoting pedestrian and cyclist activity and minimizing segregation between road users. Despite the intended scope to improve the safety of vulnerable road users, only few works in the literature focused on before after safety evaluations, mainly analyzing changes in users trajectories and speeds, traffic volumes, and conflict counts, which, while useful, cannot univocally quantify road safety. Here, we propose a more advanced methodology, based on surrogate measures of safety and Extreme Value Theory, to assess road safety before and after the implementation of a shared space. The aim is to produce a crash risk estimation in different scenarios, obtaining a quantitative and comprehensive indicator, useful to practitioners for evaluating the safety of urban design solutions. A real world case study illustrates the proposed procedure. Video data were collected on two separate days, before and after a shared space implementation, and were semiautomatically processed to extract road users trajectories. Analysis of traffic volumes, trajectories, speeds and yield ratios allowed to understand the spatial behavior of road users in the two scenarios. Traffic conflicts, identified with an innovative surrogate measure of safety called time to avoided collision point, TTAC, were then used to estimate a Lomax distribution, and therefore to model the probabilistic relationship between conflicts and crashes, eventually retrieving a crash risk estimate. Results show that the analyzed shared space was able to significantly reduce the risk of crashes, and these findings are consistent with the observed changes in users speed and spatial behavior. The analyzed case study and its limitations were useful in highlighting the methodology main features and suggesting practical prescriptions for practitioners.

stat.AP↗

arXiv2023

From Tensor Network Quantum States to Tensorial Recurrent Neural Networks

We show that any matrix product state (MPS) can be exactly represented by a recurrent neural network (RNN) with a linear memory update. We generalize this RNN architecture to 2D lattices using a multilinear memory update. It supports perfect sampling and wave function evaluation in polynomial time, and can represent an area law of entanglement entropy. Numerical evidence shows that it can encode the wave function using a bond dimension lower by orders of magnitude when compared to MPS, with an accuracy that can be systematically improved by increasing the bond dimension.

quant-ph↗