Reon Tabata | arXiv Science

arXiv2026

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

cs.RO↗

arXiv2026

Image-to-Point Cloud Registration Made Easy with Rectified Flow-based LiDAR Upsampling

Image-to-Point Cloud Registration (I2P) is essential for integrating camera and LiDAR in perception and autonomous systems, yet the modality gap between images and point clouds makes it difficult to achieve both high accuracy and strong generalization. In this paper, we propose a simple yet effective I2P method that treats LiDAR as an imaging sensor: from a single sparse LiDAR scan, we generate a dense LiDAR intensity image using Conditional Rectified Flow, match it with a camera image using a pre-trained feature matcher, and estimate the 6-DoF relative pose via PnP-RANSAC. The proposed model is pre-trained through a self-supervised image completion task and fine-tuned on a small amount of LiDAR data (neither image-point cloud pairs nor ground-truth sensor poses are required), enabling it to scale to diverse LiDAR and camera configurations. Experiments on the R3LIVE dataset show that the proposed method achieves a mean error of 4.89° / 1.63 m, outperforming existing methods, while completing a single registration in approximately 0.68 s.

cs.RO↗