arXiv subjects

Renato Mancuso

Publications and source records attributed to Renato Mancuso.

23 records · Page 2Linked to original sources

arXiv2019

Neuroflight: Next Generation Flight Control Firmware

Little innovation has been made to low-level attitude flight control used by uncrewed aerial vehicles (UAVs), which still predominantly uses the classical PID controller. In this work we introduce Neuroflight, the first open source neuro-flight controller firmware. We present our toolchain for training a neural network in simulation and compiling it to run on embedded hardware. Challenges faced jumping from simulation to reality are discussed along with our solutions. Our evaluation shows the neural network can execute at over 2.67kHz on an Arm Cortex-M7 processor and flight tests demonstrate a quadcopter running Neuroflight can achieve stable flight and execute aerobatic maneuvers.

cs.RO↗

arXiv2018

Analysis of Dynamic Memory Bandwidth Regulation in Multi-core Real-Time Systems

One of the primary sources of unpredictability in modern multi-core embedded systems is contention over shared memory resources, such as caches, interconnects, and DRAM. Despite significant achievements in the design and analysis of multi-core systems, there is a need for a theoretical framework that can be used to reason on the worst-case behavior of real-time workload when both processors and memory resources are subject to scheduling decisions. In this paper, we focus our attention on dynamic allocation of main memory bandwidth. In particular, we study how to determine the worst-case response time of tasks spanning through a sequence of time intervals, each with a different bandwidth-to-core assignment. We show that the response time computation can be reduced to a maximization problem over assignment of memory requests to different time intervals, and we provide an efficient way to solve such problem. As a case study, we then demonstrate how our proposed analysis can be used to improve the schedulability of Integrated Modular Avionics systems in the presence of memory-intensive workload.

cs.DC↗

arXiv2018

Deterministic Memory Abstraction and Supporting Multicore System Architecture

Poor time predictability of multicore processors has been a long-standing challenge in the real-time systems community. In this paper, we make a case that a fundamental problem that prevents efficient and predictable real-time computing on multicore is the lack of a proper memory abstraction to express memory criticality, which cuts across various layers of the system: the application, OS, and hardware. We, therefore, propose a new holistic resource management approach driven by a new memory abstraction, which we call Deterministic Memory. The key characteristic of deterministic memory is that the platform - the OS and hardware - guarantees small and tightly bounded worst-case memory access timing. In contrast, we call the conventional memory abstraction as best-effort memory in which only highly pessimistic worst-case bounds can be achieved. We propose to utilize both abstractions to achieve high time predictability but without significantly sacrificing performance. We present deterministic memory-aware OS and architecture designs, including OS-level page allocator, hardware-level cache, and DRAM controller designs. We implement the proposed OS and architecture extensions on Linux and gem5 simulator. Our evaluation results, using a set of synthetic and real-world benchmarks, demonstrate the feasibility and effectiveness of our approach.

cs.AR↗

arXiv2018

Reinforcement Learning for UAV Attitude Control

Autopilot systems are typically composed of an "inner loop" providing stability and control, while an "outer loop" is responsible for mission-level objectives, e.g. way-point navigation. Autopilot systems for UAVs are predominately implemented using Proportional, Integral Derivative (PID) control systems, which have demonstrated exceptional performance in stable environments. However more sophisticated control is required to operate in unpredictable, and harsh environments. Intelligent flight control systems is an active area of research addressing limitations of PID control most recently through the use of reinforcement learning (RL) which has had success in other applications such as robotics. However previous work has focused primarily on using RL at the mission-level controller. In this work, we investigate the performance and accuracy of the inner control loop providing attitude control when using intelligent flight control systems trained with the state-of-the-art RL algorithms, Deep Deterministic Gradient Policy (DDGP), Trust Region Policy Optimization (TRPO) and Proximal Policy Optimization (PPO). To investigate these unknowns we first developed an open-source high-fidelity simulation environment to train a flight controller attitude control of a quadrotor through RL. We then use our environment to compare their performance to that of a PID controller to identify if using RL is appropriate in high-precision, time-critical flight control.

cs.RO↗

arXiv2017

Restart-Based Fault-Tolerance: System Design and Schedulability Analysis

Embedded systems in safety-critical environments are continuously required to deliver more performance and functionality, while expected to provide verified safety guarantees. Nonetheless, platform-wide software verification (required for safety) is often expensive. Therefore, design methods that enable utilization of components such as real-time operating systems (RTOS), without requiring their correctness to guarantee safety, is necessary. In this paper, we propose a design approach to deploy safe-by-design embedded systems. To attain this goal, we rely on a small core of verified software to handle faults in applications and RTOS and recover from them while ensuring that timing constraints of safety-critical tasks are always satisfied. Faults are detected by monitoring the application timing and fault-recovery is achieved via full platform restart and software reload, enabled by the short restart time of embedded systems. Schedulability analysis is used to ensure that the timing constraints of critical plant control tasks are always satisfied in spite of faults and consequent restarts. We derive schedulability results for four restart-tolerant task models. We use a simulator to evaluate and compare the performance of the considered scheduling models.

eess.SY↗