arXiv subjects

Remi Delaporte-Mathurin

Publications and source records attributed to Remi Delaporte-Mathurin.

5 recordsLinked to original sources

arXiv2026

When chemical potential continuity fails: kinetic interface models for hydrogen isotope transport

Macroscopic hydrogen transport codes model material interfaces with local thermodynamic equilibrium (LTE), imposing continuity of chemical potential as a per-species constraint. Three assumptions hide in that condition: fast interfacial equilibration, a single exchange pathway between the two sides, and a carrier species known in advance on each side. The literature scrutinises the first, but the other two are the more consequential failures, and neither survives at a metal/molten-salt interface. We replace the constraint with reversible reaction channels at the interface that obey mass action, with detailed balance fixing each ratio of rate constants from the thermodynamic data that already parameterise LTE, and we implement the framework in festim. LTE is recovered as the fast-kinetics limit of a single channel, in both its Sieverts/Sieverts and its Sieverts/Henry form, so the framework generalises LTE and does not compete with it. A Damk\"ohler number delimits validity within a channel, a branching ratio between channels. In a representative nickel/FLiBe system, hydrogen partitions kinetically between molecular and fluoride carriers. The apparent interfacial law then drifts between Sieverts and Henry with loading and salt redox state, and an LTE condition underestimates the steady permeating flux. The measured pressure exponent is set by the branching ratio, not by any fixed property of the salt; a redox sweep at fixed temperature should continuously shift it between 0.5 and 1. With two isotopes, two metal-side species feed five salt-side carriers, and a per-species LTE condition is ill-posed.

cond-mat.mtrl-sci↗

arXiv2026

Quantifying Multidimensional Transport Effects on Permeability Inference in FLiBe Systems Using a Validation-Informed Modeling Framework

Permeability of hydrogen isotopes in molten salts is commonly inferred from permeation experiments using simplified one-dimensional interpretations, which may not capture the coupled transport pathways present in realistic systems. In this work, a multi-dimensional, multi-material hydrogen isotope transport modeling framework implemented in FESTIM is benchmarked against permeation measurements from the HYPERION experiment conducted at the MIT Plasma Science and Fusion Center.The model explicitly resolves transport across molten salt and nickel structures, as well as external boundary conditions, enabling system-level interpretation of the measured permeation fluxes over the temperature range 773-973K. Rather than relying on idealized one-dimensional formulations for permeability estimation, this study employs a validation-informed inverse framework to assess how multidomain transport and external boundary assumptions influence the permeability inferred from experimental fluxes.Two limiting external boundary conditions, representing ideal coating and uncoated vessel behavior, are used to define a physically motivated envelope for hydrogen isotope exchange with the environment.The model captures the observed magnitude and temperature dependence of permeation fluxes under both conditions, while revealing significant lateral transport and sidewall leakage pathways that are not represented in one-dimensional interpretations.The inferred FLiBe permeability exhibits consistent Arrhenius behavior but spans a range that depends strongly on the assumed boundary conditions, demonstrating that using one-dimensional formulations to describe a permeation experiment may not be adequate to extract accurate permeability.These results provide a physically grounded framework for interpreting permeation measurements in coupled liquid-metal systems and highlight the importance of multidomain transport modeli

physics.comp-ph↗

arXiv2026

SHIELD: A Reference Gas-Driven Permeation Platform for Hydrogen Permeation Studies

A gas-driven permeation (GDP) platform, SHIELD (Salt-compatible Hydrogen barrier Investigation and EvaLuation for fusion Devices), has been developed to measure hydrogen transport properties in structural materials under controlled thermal and pressure conditions. The system is designed to minimise experimental uncertainties associated with leaks, temperature instability, and pressure measurement, while providing reproducible conditions for permeation experiments. The rig operates in a static GDP configuration with independent upstream and downstream volumes, enabling precise control of driving pressure and accurate measurement of downstream pressure rise. An openly documented data acquisition and processing framework is implemented to ensure data traceability and reproducibility. The platform's performance is demonstrated by hydrogen permeation measurements on 316 stainless steel and AISI 1018 low-carbon steel over the temperature range of \SIrange{100}{600}{\degreeCelsius}. Steady-state permeation fluxes are extracted from linear downstream pressure rise and used to determine permeability. The measured permeability exhibits Arrhenius behaviour and agrees well with published literature data for both materials. Permeability measurements are shown to be robust and reproducible. These results demonstrate that SHIELD provides a reliable reference platform for hydrogen permeation measurements and is well-suited to evaluating permeation barrier coatings and advanced materials for fusion applications.

physics.ins-det↗

arXiv2026

Hydrogen Inventory Simulations for PFCs (HISP)

Hydrogen Inventory Simulations for Plasma facing components (HISP) is an open-source simulation tool to model the evolution of hydrogen (H) isotopes inventory in plasma-facing-components (PFCs) of magnetic confinement fusion devices. The objective was to produce a demonstrative study describing the efficiency of tritium (T) removal strategies in ITER. HISP transforms plasma code outputs to spatial-averaged inputs along ITER's first wall (FW) and divertor for 1D H transport models using FESTIM. Exposure conditions were tested in three scenarios that included DT operation and varied T removal methods. Generally, DT operation resulted in $\approx$ \SI{35}{g} of T in FW and divertor components after 10 days of DT pulses. Almost \SI{80}{\%} of the total T inventory resided in co-deposited boron layers in the divertor. Baking proved to be the most effective T removal method in the divertor, decreasing T inventory by almost \SI{88}{\%} for tungsten and almost \SI{30}{\%} for boron. T removal was also evaluated from Glow Discharge Conditioning (GDC) - with a peak efficiency of \SI{23}{\%} in the tungsten FW - and low power deuterium (DD) pulses - with a peak efficiency of \SI{13}{\%} in the entire divertor. Due to the high removal efficiency of baking, inclusion of GDC and DD pulses in the tested scenarios did not meaningfully change final T inventory values, which varied by less than \SI{2}{\%} in the FW and \SI{10}{\%} in the divertor between scenarios.

physics.plasm-ph↗

arXiv2024

Advancing Tritium Self-Sufficiency in Fusion Power Plants: Insights from the BABY Experiment

In the pursuit of fusion power, achieving tritium self-sufficiency stands as a pivotal challenge. Tritium breeding within molten salts is a critical aspect of next-generation fusion reactors, yet experimental measurements of \gls{tbr} have remained elusive. Here we present the results of the \gls{baby} experiment, which represents a pioneering effort in tritium research by utilizing high-energy (\SI{14}{\mega\electronvolt}) neutron irradiation of molten salts, a departure from conventional low-energy neutron approaches. Using a small-scale (\SI{100}{\milli\litre}) molten salt tritium breeding setup, we not only simulated, but also directly measured a \gls{tbr}. This innovative approach provides crucial experimental validation, offering insights unattainable through simulation alone. Moreover, our findings reveal a surprising outcome: tritium was predominantly collected as HT, contrary to the expected TF. This underscores the complexity of tritium behavior in molten salts, highlighting the need for further investigation. This work lays the foundation for a more sophisticated experimental setup, including increasing the volume of the breeder, enhancing neutron detection, and refining tritium collection systems. Such improvements are crucial for advancing our understanding of fusion reactor feasibility and paving the way for future experiments.

physics.plasm-ph↗