arXiv Science⌕ Search

arXiv subjects

Reid Patterson

Publications and source records attributed to Reid Patterson.

4 recordsLinked to original sources

A new approach to measuring both the steady flow curve and the planar extensional viscosity of complex fluids using exponential shear

We revisit the protocol known as Exponential Shear (ES), first proposed by Doshi and Dealy in 1986. This is a transient strong flow that can be readily imposed in the laboratory using commercial strain-controlled (separate motor and transducer) rheometers which accurately measure both the (exponentially) time-varying torque and normal force exerted by the sample. Numerous studies over the years have proposed competing definitions of an appropriate material function for reporting data obtained from the exponentially time-varying imposed deformation. We revisit this unresolved challenge and carefully reconsider the exponential material kinematics involved and the proper definition of the corresponding material functions. We show that by understanding the time-varying eigenvalues and eigenvectors of both the shearing kinematics and the evolving state of stress in the sample it is, in fact, possible to use an exponential shear test to quantitatively map out \textit{both} the full flow curve (of shear viscosity vs. shear rate) and the steady planar extensional viscosity curve as a function of deformation rate. These findings are supported by numerical simulations of a number of nonlinear viscoelastic constitutive models, asymptotic analysis, as well as experiments with several polymeric liquids.

cond-mat.soft↗

Self-Consistent Fourier-Tschebyshev Representations of the First Normal Stress Difference in Large Amplitude Oscillatory Shear

Large Amplitude Oscillatory Shear (LAOS) is a key technique for characterizing nonlinear viscoelasticity in a wide range of materials. Most research to date has focused on the shear stress response to an oscillatory strain input. However, for highly elastic materials such as polymer melts, the time-varying first normal stress difference $N_1(t;ω,γ_0)$ can become much larger than the shear stress at sufficiently large strains, serving as a sensitive probe of the material's nonlinear characteristics. We present a Fourier-Tschebyshev framework for decomposing the higher-order spectral content of the $N_1$ material functions generated in LAOS. This new decomposition is first illustrated through analysis of the second-order and fourth-order responses of the quasilinear Upper Convected Maxwell model and the fully nonlinear Giesekus model. We then use this new framework to analyze experimental data on a viscoelastic silicone polymer and a thermoplastic polyurethane melt. Furthermore, we couple this decomposition with the recently developed Gaborheometry strain sweep technique to enable rapid and quantitative determination of the $N_1$ material function from experimental normal force data obtained in a single sweep from small to large strain amplitudes. We verify that asymptotic connections between the oscillatory shear stress and $N_1$ in the quasilinear limit are satisfied for the experimental data, ensuring self-consistency. This framework for analyzing the first normal stress difference is complementary to the established framework for analyzing the shear stresses in LAOS, and augments the content of material-specific data sets, hence more fully quantifying the important nonlinear viscoelastic properties of a wide range of soft materials.

cond-mat.soft↗

Elasto-Inertial Instability in Torsional Flows of Shear-Thinning Viscoelastic Fluids

It is well known that inertia-free shearing flows of a viscoelastic fluid with curved streamlines, such as the torsional flow between a rotating cone and plate, or the flow in a Taylor-Couette geometry, can become unstable to a three-dimensional time-dependent instability at conditions exceeding a critical Weissenberg (Wi) number. However, the combined effects of fluid elasticity, shear thinning, and finite inertia (as quantified by the Reynolds number Re) on the onset of elasto-inertial instabilities are not fully understood. Using a set of cone-plate geometries, we experimentally explore the entire Wi - Re phase space for a series of rate-dependent viscoelastic fluids (quantified using a shear thinning parameter $β_P$). We tune $β_P$ by varying the polymer concentration in solutions. This progressively reduces shear-thinning but leads to finite inertial effects before the onset of elastic instability, thus naturally resulting in elasto-inertial coupling. Transient rheometric measurements and flow visualization experiments allow us to investigate the effects of flow geometry and document the combined effects of varying Wi, Re, and $β_P$ on the emergence of secondary motions at the onset of instability. The resulting critical state diagram quantitatively depicts the competition between the stabilizing effects of shear thinning and the destabilizing effects of inertia. We extend the curved streamline instability criterion of Pakdel and McKinley 1996 for the onset of purely elastic instability in curvilinear geometries by using scaling arguments to incorporate shear thinning and finite inertial effects. The augmented condition facilitates predictions of the onset of instability over a broader range of flow conditions, thus bridging the gap between purely elastic and elasto-inertial curved streamline instabilities.

physics.flu-dyn↗

Rod-climbing rheometry revisited

The rod-climbing or Weissenberg effect in which the free surface of a complex fluid climbs a thin rotating rod is a popular and convincing experiment demonstrating the existence of elasticity in polymeric fluids. The interface shape depends on the rotation rate, fluid elasticity, surface tension, and inertia. By solving the equations of motion in the low rotation rate limit for a second-order fluid, a mathematical relationship between the interface deflection and the fluid material functions, specifically the first and second normal stress differences, emerges. This relationship has been used in the past to measure the climbing constant, a combination of the first ($Ψ_{1,0}$) and second ($Ψ_{2,0}$) normal stress difference coefficients from experimental observations of rod-climbing in the low inertia limit. However, a quantitative reconciliation of such observations with the capabilities of modern-day torsional rheometers is lacking. To this end, we combine rod-climbing experiments with both small amplitude oscillatory shear flow measurements and steady shear measurements of the first normal stress difference from commercial rheometers to quantify the values of both normal stress differences for a series of polymer solutions. Furthermore, by retaining the oft-neglected inertial terms, we show that the climbing constant $\hatβ=0.5Ψ_{1,0}+2Ψ_{2,0}$ can be measured even when the fluids, in fact, experience rod descending. A climbing condition derived by considering the competition between elasticity and inertial effects accurately predicts whether a fluid will undergo rod-climbing or rod-descending. The analysis and observations presented in this study establish rotating rod rheometry as a prime candidate for measuring normal stress differences in polymeric fluids at low shear rates that are often below commercial rheometers' sensitivity limits.

physics.flu-dyn↗