arXiv Science⌕ Search

arXiv subjects

Rayan Dhib

Publications and source records attributed to Rayan Dhib.

6 recordsLinked to original sources

An implicit high-order flux reconstruction method with logarithmic variables for hypersonic flows in thermochemical nonequilibrium

Simulating hypersonic flows in thermochemical nonequilibrium requires solving the Navier-Stokes equations for reacting, possibly ionised mixtures. Compact high-order computations of viscous two-temperature air flows on unstructured grids have not gone beyond P = 2. We present an implicit Flux Reconstruction (FR) method for such flows, built on three ingredients. First, the solver stores and updates the logarithms of the partial densities and temperatures, making every state admissible without a positivity limiter and, for ionised mixtures, imposing charge neutrality consistently with the implicit update. Second, shocks are captured by subcell order blending, extended to steady implicit computations on curved Gauss-Legendre meshes, with second-order subcell blending in subsonic regions and an automatic freeze of the blending near convergence. Third, a pseudo-transient Newton method with a physicality-limited update and automatic CFL control reaches steady state from the free stream with the same settings at every order. The design order is verified up to sixth order on a manufactured solution for five-species air with finite-rate chemistry and vibrational relaxation. Steady viscous solutions up to sixth order are obtained for five- and eleven-species air on the High Enthalpy shock tunnel Göttingen (HEG) cylinder and for eleven-species air on the RAM-C II vehicle. To our knowledge, this work gives the first design-order verification of a high-order method with finite-rate air chemistry and vibrational relaxation, and the first high-order finite-element-type computations of viscous eleven-species, two-temperature air. On the HEG cylinder, the stagnation-point heat flux is within 2% of finite-volume references and within 6% of the measurements, with a comparable number of degrees of freedom to second-order finite-volume computations but on meshes with 20 to 40 times fewer elements.

physics.comp-ph↗

HelioFill: History-Conditioned Diffusion Estimation of Solar Far-Side EUV Emission

The loss of STEREO-B in 2014 created a persistent blind spot in Extreme UltraViolet imaging of the solar far-side. We present textbf{HelioFill}, to the authors' knowledge, the first denoising-diffusion inpainting model that estimates the unobserved sector of full-Sun 304 A maps from the current Earth-side (SDO) and STEREO-A views. Because these views cannot constrain structures fully enclosed in the unobserved sector, HelioFill's diffusion stage is also conditioned on the sector's own rotation history, supplied as causal persistence and information-age maps; a rectified-flow refinement then adds realistic small-scale texture. Test rotations are separated from the diffusion stage's training timestamps by full-rotation guard bands. Over the unobserved sector, HelioFill's estimate correlates with the three-view truth at rho=0.520, above persistence and the input-independent climatological mean on 97.9% of the test maps, which conditioning on the current views alone does not achieve; in peak signal-to-noise ratio it exceeds them by 2.27 and 0.66 dB and matches a direct observation of the sector made approx 29h before or after it. The refinement lowers learned perceptual image patch similarity by 11% at a cost of 0.50 dB and 0.055 in correlation. HelioFill localizes active regions better than persistence (Dice score 0.449 vs. 0.384) and detects fully enclosed ones, although persistence detects more individual regions and coronal holes remain poorly reproduced. Against near-simultaneous far-side Solar Orbiter/EUI observations from 2022-2025, HelioFill correlates with the truth at rho=0.375, above climatology and level with persistence, which it exceeds in PSNR and structural similarity index; its diffusion stage alone reaches 0.460, above both, and the refinement stage costs the difference. HelioFill thus provides observationally plausible global EUV context within quantified limits.

astro-ph.SR↗

Magnetohydrodynamic coronal modelling with high-fidelity magnetograms

To resolve coronal structures in detail, it is essential to constrain the coronal model using high-fidelity magnetograms with minimal smoothing. In this paper, we improve the numerical stability of COCONUT to enable efficient coronal MHD simulations driven directly by photospheric magnetograms, including magnetic field strengths exceeding 1000 Gauss (G), and then use it to investigate the impact of small-scale magnetic field structures that are typically filtered out of photospheric magnetograms on the coronal simulation results. We constrain this model with two types of magnetograms: the high-fidelity HMI photospheric magnetogram with only minor preprocessing through Gaussian smoothing, which preserves magnetic field strengths reaching 1500 G, and one processed using 50th-order filtered spherical harmonics, where the magnetic field strength is limited to below 100 G. The results demonstrate that the COCONUT can reproduce the large-scale coronal structures revealed by pB and EUV observations. Compared with the coronal MHD simulation constrained by a conventionally filtered magnetogram, the simulation constrained by the high-fidelity magnetogram yields approximately $50\%$ more OMF and produces EUV images that are more consistent with the observations. Moreover, the results show that when viewed from low latitudes in certain EUV passbands, such as the 193~Å channel, open-field regions near the solar poles may appear as bright structures that are typically associated with closed-field regions. This finding highlights the need for solar polar-orbiting missions to overcome the limitations and ambiguities arising from the restricted view of the polar regions from the ecliptic plane and to provide more complete full-Sun observations.

astro-ph.SR↗

MHD modeling of magnetic flux evolution around solar maximum by the coronal model COCONUT

In this paper, we simulate the magnetic flux evolution at different heliocentric distances during two solar-maximum Carrington rotations (CRs) using the time-evolving coronal magnetohydrodynamic (MHD) model COCONUT to investigate the ``open flux problem". The simulated open magnetic flux (OMF) near the solar surface is comparable to that derived from \textit{in situ} observations by PSP and WIND satellites, and is about 5 times larger than that derived from SDO coronal hole (CH) observations, and the variation in the simulated radial solar wind speed is consistent with the evolution of the OMF evaluated around the corresponding solar disk center. We find that the OMF is reduced by up to $45\%$ from 1.01~$R_s$ to 0.1~AU and increases with a higher-resolution mesh. The OMF decreases mainly within 3~$R_s$, where the closed magnetic flux drops more rapidly, from about $60\%$ of the total magnetic flux at 1.01~$R_s$ to about $4\%$ at 3~$R_s$. Moderate adjustment of the heating source term can effectively regulate the simulated OMF. Preprocessing the photospheric magnetograms with a potential field solver that removes many high-order spherical harmonic components reduces the OMF in the low corona, while having little impact beyond 3~$R_s$. Additionally, the ratio of the maximum to the minimum OMF can reach 1.4 during a single solar maximum CR. These findings highlight the necessity of considering higher grid resolution, more realistic heating mechanisms, and the time-evolving regime of coronal MHD modeling when further addressing the ``open flux problem".

astro-ph.SR↗

COCONUT: Toward practical time-evolving Sun-to-Earth magnetohydrodynamic modeling

Due to computational efficiency and numerical stability limitations, coronal simulations constrained by static magnetograms are typically performed first and then used to drive inner-heliosphere (IH) models. In this paper, we calculate the Sun-to-Earth coronal and wind evolutions using a single time-evolving MHD model, showing that implicit MHD models have the potential to meaningfully simplify and improve the overall Sun-to-Earth modelling pipeline. We extend the implicit time-evolving coronal MHD model COCONUT out to 1 AU, and utilise it to investigate solar coronal and wind evolutions around a solar maximum Carrington rotation (CR). We compare quasi-steady-state and time-evolving Sun-to-Earth simulations to evaluate the impact of the inner-boundary magnetic field evolution, which is neglected in steady-state simulations, on background plasma parameters. Comparisons with commonly used coupled Sun-to-Earth simulations are also conducted to further validate and assess the Sun-to-Earth model COCONUT. The results show that the time-evolving implicit MHD modelling approach yields noticeable differences compared to oversimplified steady-state simulations, and is efficient enough for practical applications. Modelling the solar corona and wind using a single MHD model simplifies the modelling pipeline and avoids uncertainties associated with coupling different coronal and IH models. The noticeable differences in the temporal evolution of plasma parameters at the L1 and L5 points highlight the need to use continuously evolving, synchronised magnetic field observations to improve global coronal and solar wind simulations, whereas the overall consistent evolutionary trend reveals the reliability of using L5 observations to forecast solar wind conditions near Earth about four days in advance.

astro-ph.SR↗

COCONUT: A coronal model with an energy decomposition strategy

In this paper, we propose an energy decomposition method combined with an HLL Riemann solver that includes an additional dissipation term in the energy equation to improve the numerical stability of the fully implicit, time-evolving coronal model COCONUT and extend its applicability to solar-maximum phases. In MHD simulations that evolve conservative variables in time, the thermal pressure is typically computed by subtracting the magnetic and kinetic energies from the total energy. In low-beta (the ratio of thermal to magnetic pressure; $< 10^{-3}$) regions, discretization errors of magnetic energy can be comparable to the thermal pressure, potentially leading to negative thermal pressure and causing the simulation to crash. Therefore, we update the decomposed energy, excluding the magnetic energy, at each time step. It avoids subtracting a large magnetic energy from the total energy to obtain a very small thermal pressure in low-$β$ regions, thereby improving the numerical stability of MHD models. We validate the algorithm using a time-evolving solar-maximum Carrington rotation simulation in 2025, which the previous code failed to run to completion. We also perform quasi-steady-state coronal simulations and 2D benchmark tests to further assess the algorithm's performance. The simulation results show that the algorithm produces results nearly identical to those obtained using the traditional full energy equation during solar minimum, while significantly improving COCONUT's ability to simulate coronal evolution under strong magnetic fields, even including fields exceeding 100 Gauss with $β<10^{-3}$. This method provides a promising approach for performing quasi-realistic coronal simulations during solar maxima.

astro-ph.SR↗