arXiv subjects

Ralph Assmann

Publications and source records attributed to Ralph Assmann.

12 recordsLinked to original sources

arXiv2021

Self-calibration technique for characterization of integrated THz waveguides

Emerging high-frequency accelerator technology in the terahertz regime is promising for the development of compact high-brightness accelerators and high resolution-power beam diagnostics. One resounding challenge when scaling to higher frequencies and to smaller structures is the proportional scaling of tolerances which can hinder the overall performance of the structure. Consequently, characterizing these structures is essential for nominal operation. Here, we present a novel and simple self-calibration technique to characterize the dispersion relation of integrated hollow THz-waveguides. The developed model is verified in simulation by extracting dispersion characteristics of a standard waveguide a priori known by theory. The extracted phase velocity does not deviate from the true value by more than $ 9 \times 10^{-5} ~\%$. In experiments the method demonstrates its ability to measure dispersion characteristics of non-standard waveguides embedded with their couplers with an accuracy below $ \approx 0.5~\% $ and precision of $ \approx 0.05~\% $. Equipped with dielectric lining the metallic waveguides act as slow wave structures, and the dispersion curves are compared without and with dielectric. A phase synchronous mode, suitable for transverse deflection, is found at $ 275~\text{GHz} $.

physics.acc-ph↗

arXiv2021

A final focus system for injection into a laser plasma accelerator at the ARES linac

ARES (Accelerator Research Experiment at SINBAD) is a linear accelerator at the SINBAD (Short INnovative Bunches and Accelerators at DESY) facility at DESY. ARES was designed to combine reproducible beams from conventional RF-based accelerator technology with novel but still experimental acceleration techniques. It aims to produce high brightness ultra-short electron bunches in the range of sub fs to few fs, at a beam energy of 100-150 MeV, suitable for injection into novel acceleration experiments like Dielectric Laser Acceleration (DLA) and Laser driven Plasma Acceleration (LPA). This paper reports the conceptual design and simulations of a final focus system for injecting into a LPA experiment at ARES, including permanent magnetic quadrupoles (PMQ), sufficient longitudinal space for collinear laser and electron transport, space for required diagnostics and a LPA setup. Space-charge effects play a significant role and are included. Simulation results on the focusing of the ARES electron bunches into and their transport through the laser-driven plasma are presented. The effects of several errors have been simulated and are reported.

physics.acc-ph↗

arXiv2021

Conceptual Design Report for the LUXE Experiment

This Conceptual Design Report describes LUXE (Laser Und XFEL Experiment), an experimental campaign that aims to combine the high-quality and high-energy electron beam of the European XFEL with a powerful laser to explore the uncharted terrain of quantum electrodynamics characterised by both high energy and high intensity. We will reach this hitherto inaccessible regime of quantum physics by analysing high-energy electron-photon and photon-photon interactions in the extreme environment provided by an intense laser focus. The physics background and its relevance are presented in the science case which in turn leads to, and justifies, the ensuing plan for all aspects of the experiment: Our choice of experimental parameters allows (i) effective field strengths to be probed at and beyond the Schwinger limit and (ii) a precision to be achieved that permits a detailed comparison of the measured data with calculations. In addition, the high photon flux predicted will enable a sensitive search for new physics beyond the Standard Model. The initial phase of the experiment will employ an existing 40 TW laser, whereas the second phase will utilise an upgraded laser power of 350 TW. All expectations regarding the performance of the experimental set-up as well as the expected physics results are based on detailed numerical simulations throughout.

hep-ex↗

arXiv2020

Longitudinal phase space synthesis with tailored 3D-printable dielectric-lined waveguides

Longitudinal phase space manipulation is a critical and necessary component for advanced acceleration concepts, radiation sources and improving performances of X-ray free electron lasers. Here we present a simple and versatile method to semi-arbitrarily shape the longitudinal phase space of a charged bunch by using wakefields generated in tailored dielectric-lined waveguides. We apply the concept in simulation and provide examples for radiation generation and bunch compression. We finally discuss the manufacturing capabilities of a modern 3D printer and investigate how printing limitations, as well as the shape of the input LPS affect the performance of the device.

physics.acc-ph↗

arXiv2019

Plasma-photonic spatiotemporal synchronization of relativistic electron and laser beams

Modern particle accelerators and their applications increasingly rely on precisely coordinated interactions of intense charged particle and laser beams. Femtosecond-scale synchronization alongside micrometre-scale spatial precision are essential e.g. for pump-probe experiments, seeding and diagnostics of advanced light sources and for plasma-based accelerators. State-of-the-art temporal or spatial diagnostics typically operate with low-intensity beams to avoid material damage at high intensity. As such, we present a plasma-based approach, which allows measurement of both temporal and spatial overlap of high-intensity beams directly at their interaction point. It exploits amplification of plasma afterglow arising from the passage of an electron beam through a laser-generated plasma filament. The corresponding photon yield carries the spatiotemporal signature of the femtosecond-scale dynamics, yet can be observed as a visible light signal on microsecond-millimetre scales.

physics.plasm-ph↗

arXiv2018

Longitudinal phase space reconstruction simulation studies using a novel X-band transverse deflecting structure at the SINBAD facility at DESY

A transverse deflecting structure (TDS) is a well-known device for characterizing the longitudinal properties of an electron bunch in a linear accelerator. The standard use of such a cavity involves streaking the bunch along a transverse axis and analysing the image on a screen downstream to find the bunch length and slice properties along the other transverse axis. A novel X-band deflecting structure, which will allow the polarization of the deflecting field to be adjusted, is currently being designed as part of a collaboration between CERN, DESY and PSI. This new design will allow bunches to be streaked at any transverse angle within the cavity, which will open up the possibility of new measurement techniques, which could be combined to characterize the 6D phase space distribution of bunches. In this paper, a method is presented for reconstructing the longitudinal phase space distribution of bunches by using the TDS in combination with a dipole. Simulations of this technique for the SINBAD-ARES beamline are presented and the key limitations related to temporal resolution and induced energy spread are discussed.

physics.acc-ph↗

arXiv2018

Full PIC simulation of a first ACHIP experiment @ SINBAD

In laser illuminated dielectric accelerators (DLA) high acceleration gradients can be achieved due to high damage thresholds of the materials at optical frequencies. This is a necessity for developing more compact particle accelerator technologies. The Accelerator on a CHip International Program (ACHIP) funded by the Gordon and Betty Moore Foundation is researching such devices. DESY Hamburg is part of the collaboration. The dedicated accelerator research facility SINBAD is particularly well suited for DLA experiments at relativistic electron energies. High quality beams and short bunch lengths are anticipated from the ARES linac which is currently under construction at SINBAD. The aim of the experiment is the injection of a short electron bunch from the ARES linac into a DLA. In this study the results of one of the first possible experiments at the facility are estimated via a combination of particle-in-cell (PIC) and tracking simulations. ASTRA is used to simulate an electron bunch from the ARES linac at a suitable working point. The dielectric part of the setup will be simulated using the PIC code from CST Particle Studio incorporating the retrieved bunch from the ASTRA simulation. The energy spectra of the electron bunches are calculated as would be measured from a spectrometer dipole with and without the laser fields.

physics.acc-ph↗

arXiv2018

Simulation of deflecting structures for dielectric laser driven accelerators

In laser illuminated dielectric accelerators (DLA) high acceleration gradients can be achieved, due to high damage thresholds of the materials at optical frequencies. This is a necessity in developing more compact particle accelerator technologies. The Accelerator on a CHip International Program funded by the Gordon and Betty Moore Foundation is researching such devices. Means to manipulate the beam, i.e. focusing and deflection, are needed for the proper operation of such devices. These means should rely on the same technologies for manufacturing and powering like the accelerating structures. In this study different concepts for dielectric laser driven deflecting structures are investigated via particle-in-cell (PIC) simulations and compared afterwards. The comparison is conducted with respect to the suitability for beam manipulation. Another interesting application will be investigated as a diagnostic device for ultra short electron bunches from conventional accelerators functioning like a radio frequency transverse deflecting cavity (TDS).

physics.acc-ph↗

arXiv2018

Using short drive laser pulses to achieve net focusing forces in tailored dual grating dielectric structures

Laser-driven grating type DLA (Dielectric Laser Accelerator) structures have been shown to produce accelerating gradients on the order of GeV/m. In simple $\beta$-matched grating structures due to the nature of the laser induced steady-state in-channel fields the per period forces on the particles are mostly in longitudinal direction. Even though strong transverse magnetic and electric fields are present, the net focusing effect over one period at maximum energy gain is negligible in the case of relativistic electrons. Stable acceleration of realistic electron beams in a DLA channel however requires the presence of significant net transverse forces. In this work we simulate and study the effect of using the transient temporal shape of short Gaussian drive laser pulses in order to achieve suitable field configurations for potentially stable acceleration of relativistic electrons in the horizontal plane. In order to achieve this, both the laser pulse and the grating geometry are optimized. Simulations conducted with the Particle-In-Cell code VSim 7.2 are shown for both the transient and steady state/long pulse case. Finally we investigate how the drive laser phase dependence of the focusing forces could affect a potential DLA-based focusing lattice.

physics.acc-ph↗

arXiv2018

Simulations and plans for possible DLA experiments at SINBAD

In this work we present the outlines of possible experiments for dielectric laser acceleration (DLA) of ultra-short relativistic electron bunches produced by the ARES linac, currently under construction at the SINBAD facility (DESY Hamburg). The experiments are to be performed as part of the Accelerator on a Chip International Program (ACHIP), funded by the Gordon and Betty Moore Foundation. At SINBAD we plan to test the acceleration of already pre-accelerated relativistic electron bunches in laser-illuminated dielectric grating structures. We present outlines of both the acceleration of ultra-short single bunches, as well as the option to accelerate phase-synchronous sub-fs microbunch trains. Here the electron bunch is conditioned prior to the injection by interaction with an external laser field in an undulator. This generates a sinusoidal energy modulation that is transformed into periodic microbunches in a subsequent chicane. The phase synchronization is achieved by driving both the modulation process and the DLA with the same laser pulse. In addition to the conceptual layouts and plans of the experiments we present start-to-end simulation results for different ARES working points.

physics.acc-ph↗

arXiv2017

An Adiabatic Phase-Matching Accelerator

We present a general concept to accelerate non-relativistic charged particles. Our concept employs an adiabatically-tapered dielectric-lined waveguide which supports accelerating phase velocities for synchronous acceleration. We propose an ansatz for the transient field equations, show it satisfies Maxwell's equations under an adiabatic approximation and find excellent agreement with a finite-difference time-domain computer simulation. The fields were implemented into the particle-tracking program {\sc astra} and we present beam dynamics results for an accelerating field with a 1-mm-wavelength and peak electric field of 100~MV/m. The numerical simulations indicate that a $\sim 200$-keV electron beam can be accelerated to an energy of $\sim10$~MeV over $\sim 10$~cm. The novel scheme is also found to form electron beams with parameters of interest to a wide range of applications including, e.g., future advanced accelerators, and ultra-fast electron diffraction.

physics.acc-ph↗

arXiv2010

A proposed experiment on the proton driven plasma wakefield acceleration

Simulations have shown that a high energy, short and intense proton beam can drive a large amplitude plasma wave and accelerate an electron beam to the energy frontier in a single plasma channel. To verify this novel idea, a proof-of-principle demonstration experiment is now being planned. The idea is to use the available high energy proton beams either from the Proton Synchrotron (PS) or the Super Proton Synchrotron (SPS) at CERN, to shoot the beam into a plasma cell and to excite the plasma wakefield. A strong density modulation due to the excited plasma wakefield is produced for a long drive beam and this modulated beam in turn produces a high electric field. The proposed experimental setup is introduced in this paper. The interactions between the plasma and the proton beam are simulated and the results are presented. The compression of an SPS bunch is also discussed.

physics.acc-ph↗