arXiv subjects

Ralf Brüning

Publications and source records attributed to Ralf Brüning.

6 recordsLinked to original sources

arXiv2026

Surrogate-Assisted Framework for SI-Compliant Interconnect Design Optimization Using the Earth Mover's Distance

This work presents a deterministic, machine-assisted framework for SI-compliant PCB design based on the Earth Mover's Distance (EMD). In contrast to conventional surrogate-based optimization methods that rely on iterative black-box search procedures, the proposed approach follows an interpretable, sequential evaluation strategy. Neural surrogate models are first used to efficiently predict waveform describing features from topology-dependent design parameters. A decision tree then acts as a physically motivated quality gate that identifies SI-compliant waveforms according to predefined SI criteria. Within the resulting valid solution space, the Earth Mover's Distance is employed as a similarity metric to rank candidate designs according to their proximity to an ideal reference signal. This enables not only the deterministic identification of admissible parameter regions but also a transparent prioritization of physically superior solutions without inverse modeling or stochastic search procedures. The methodology is demonstrated using a large-scale set of simulated DDR3 fly-by waveforms. By combining surrogate prediction, interpretable classification, and EMD-based waveform evaluation, the framework provides an explainable and computationally efficient alternative to conventional optimization strategies for supporting PCB development with AI-based methods.

eess.SP↗

arXiv2026

Amortized Neural Optimization for Pre-Layout Signal Integrity Design Space Exploration using Differentiable Surrogates

Pre-layout design space exploration (DSE) for high-speed signal integrity (SI) analysis is often limited by the computational cost of simulations and iterative optimization algorithms within modern electronic design automation (EDA) workflows. While machine learning surrogate models accelerate the simulation step, optimizing designs still requires utilizing iterative black-box search methods. This iterative nature scales poorly and makes multi-corner sweeps computationally expensive. As a solution, this paper proposes amortized neural optimization (ANO) for pre-layout SI design. ANO avoids iterative black-box inference and utilizes a fully differentiable neural network surrogate model from which it extracts gradient information to train a global optimization policy. This does not solve the optimization problem repeatedly at inference, but learns the process offline, which amortizes the computational cost. Once the ANO policy is trained, it maps different channel contexts to near-optimal design parameters in a single deterministic forward pass. The efficiency and accuracy of the ANO framework are demonstrated based on three SI design scenarios, including DDR5 decision feedback equalization (DFE), 9-dimensional SerDes Tx/Rx co-equalization, and DDR3 DQS differential pair eye diagram optimization under intra-pair skew constraints. Trading roughly 10% in optimality compared to instance-specific black-box algorithms results in speedups of three to four orders of magnitude. For a large-scale 320,000-instance multi-corner SerDes sweep optimization, ANO reduces what would have taken days of computation using iterative search algorithms to a single batched forward pass that completes in milliseconds. This transforms computationally expensive SI optimization into real-time and interactive pre-layout DSE.

eess.SP↗

arXiv2026

Buffer-Parameterized Machine Learning Surrogate Models for Cross-Technology Signal Integrity Analysis and Optimization

Signal integrity (SI) analysis in printed circuit board (PCB) interconnects faces increasing complexity due to diverse integrated circuit (IC) buffer technologies, varying operating conditions, and manufacturing tolerances. Existing machine learning (ML) surrogate models for predicting SI metrics such as the inner eye contour, eye-height (EH), eye-width (EW), and transient waveform features typically rely on fixed buffer parameters, requiring costly new data generation and retraining cycles for every technology shift. This paper introduces a buffer-parameterized ML surrogate modeling methodology capable of handling cross-technology variations without retraining by treating IC buffer characteristics, e.g., clock frequency, supply voltage, rise/fall times, jitter, and internal resistors and capacitors, as dynamic model inputs alongside PCB parameters. To identify the optimal surrogate architecture for this high-dimensional space, a comprehensive benchmarking study compares tree-based methods (RFR/GBM), kernel methods (SVR/KRR), Gaussian process regression (GPR), and neural networks. The framework is subsequently validated on a complex interconnect with 44 design parameters. Results show that while anisotropic GPR excels in low-data regimes, neural networks heavily outperform other models on large datasets. Finally, the practical value of the ML surrogate models is demonstrated through a cross-technology design space exploration and optimization scenario, showcasing massive computational speedups for eye mask compliance checking compared to simulation.

eess.SP↗

arXiv2008

Glass transitions in 1, 2, 3, and 4 dimensional binary Lennard-Jones systems

We investigate the calorimetric liquid-glass transition by performing simulations of a binary Lennard-Jones mixture in one through four dimensions. Starting at a high temperature, the systems are cooled to T=0 and heated back to the ergodic liquid state at constant rates. Glass transitions are observed in two, three and four dimensions as a hysteresis between the cooling and heating curves. This hysteresis appears in the energy and pressure diagrams, and the scanning-rate dependence of the area and height of the hysteresis can be described by power laws. The one dimensional system does not experience a glass transition but its specific heat curve resembles the shape of the $D\geq 2$ results in the supercooled liquid regime above the glass transition. As $D$ increases, the radial distribution functions reflect reduced geometric constraints. Nearest-neighbor distances become smaller with increasing $D$ due to interactions between nearest and next-nearest neighbors. Simulation data for the glasses are compared with crystal and melting data obtained with a Lennard-Jones system with only one type of particle and we find that with increasing $D$ crystallization becomes increasingly more difficult.

cond-mat.dis-nn↗

arXiv2006

Coexistence of open and closed gallery spaces in intercalation compounds

A series of molybdenum disulfide intercalation compounds was prepared to study the effect of varying loadings of the samples with intercalated molecules. The molecules, (5,7,7,12,14,14-hexamethyl-1,4,8,11- tetraazacyclotetradeca-4,11-diene) macrocycles, occupy the gallery spaces between the MoS2 layers in a single layer. The samples were characterized by thermogravimetry, wide angle X-ray scattering, scanning electron microscopy and transmission electron microscopy (TEM). TEM images reveal the layer stacking as the filling of the gallery spaces with macrocycles increases gradually up to one monolayer per gallery space. Fourier transforms of these images are in excellent agreement with the X-ray scattering of the bulk compound. X-ray scattering by these compounds was simulated by evaluating the Debye sum for weighted averages of model particles that have sequences of open and closed gallery spaces. Open and closed gallery spaces coexist in the samples with less than one monolayer of intercalated molecules per gallery space. The fraction of open gallery spaces increases with macrocycle loading, from zero for restacked MoS2 without macrocycles to one for a fully intercalated compound. The sequence of open and closed spaces is approximately random, and the MoS2 layers stack with the same orientation but with random lateral shifts. The binding enthalpy of the macrocycles in the gallery spaces is about 14 meV.

cond-mat.mtrl-sci↗

arXiv2005

Characterization of the glass transition in vitreous silica by temperature scanning small-angle X-ray scattering

The temperature dependence of the x-ray scattering in the region below the first sharp diffraction peak was measured for silica glasses with low and high OH content (GE-124 and Corning 7980). Data were obtained upon scanning the temperature at 10, 40 and 80 K/min between 400 K and 1820 K. The measurements resolve, for the first time, the hysteresis between heating and cooling through the glass transition for silica glass, and the data have a better signal to noise ratio than previous light scattering and differential thermal analysis data. For the glass with the higher hydroxyl concentration the glass transition is broader and at a lower temperature. Fits of the data to the Adam-Gibbs-Fulcher equation provide updated kinetic parameters for this very strong glass. The temperature derivative of the observed X-ray scattering matches that of light scattering to within 14%.

cond-mat.dis-nn↗