arXiv subjects

Rajalakshmi Nandakumar

Publications and source records attributed to Rajalakshmi Nandakumar.

11 recordsLinked to original sources

arXiv2026

3D Point Splatting for mmWave Radar Novel View Synthesis

Solving novel view synthesis (NVS) for millimeter-wave (mmWave) radar requires a renderer that is physically faithful, complex-valued, and multi-viewpoint-tractable. No prior method achieves these three properties simultaneously. Differentiable Monte Carlo (MC) ray tracers implement the radar forward model directly with explicit material modeling and complex outputs, but do not scale to the multi-view optimization NVS demands. Optical-NVS ports of NeRF, hash grids, and 3D Gaussians train fast but discard phase and replace explicit material modeling with opaque learned features, restricting them to power-only range-azimuth (RA) magnitudes. We propose 3D Point Splatting (3DPS), the first differentiable point renderer for radar, derived directly from the standard solid-angle form of the radar equation. Each oriented 3D point carries an ITU-R P.2040 material model, evaluated in closed form, with the resulting complex phasor splatted into range bins through a precomputed point spread function (PSF). The complex-valued output makes the renderer product-agnostic. The same optimized scene yields analog-to-digital converter (ADC), complex range profile (CRP), and RA outputs through standard fast Fourier transform (FFT) pipelines without retraining for each format. On six outdoor ColoRadar scenes, 3DPS reaches 0.587 mean Pearson correlation on held-out RA images. This is between 1.7x and 5.2x the three optical-NVS baselines (RadarSplat, Radar Fields, DART). Training takes approximately 3 minutes per scene on a single RTX 4090.

cs.CV↗

arXiv2026

mmIR: Frequency-Space Inverse Rendering for 3D Millimeter-Wave Radar ADC Synthesis

High-resolution 3D radar data is scarce. Commodity mmWave sensors use small antenna arrays that limit angular resolution to several degrees, and existing datasets provide only 2D range-azimuth maps or sparse point clouds rather than raw analog-to-digital converter (ADC) signals. Hardware scaling is expensive, synthetic-aperture scanning is impractical at fleet scale, and learned synthesis methods are bottlenecked by the very data shortage they aim to address. We present mmIR, an open-source differentiable frequency-modulated continuous-wave (FMCW) radar inverse renderer that fits a physics-based forward model to real captures and re-renders from dense virtual apertures to synthesize high-resolution 3D radar data. Because radar resolution is too coarse to recover geometry directly, mmIR performs LiDAR-assisted inverse rendering: using LiDAR-derived meshes as a geometric scaffold, mmIR optimizes per-vertex International Telecommunication Union (ITU) physics materials, vertex normals, and antenna beam patterns through end-to-end automatic differentiation of a phase-coherent multiple-input multiple-output (MIMO) forward model with multi-bounce propagation, polarization, and free-space diffraction. On seven outdoor and six indoor ColoRadar scenes, mmIR achieves 0.914 mean Pearson correlation on range-azimuth maps versus 0.307 for Sionna-RT. Scenes trained on a cascaded imaging radar transfer to a co-located single-chip radar without re-training (0.554 correlation), and dense virtual arrays (100x100 elements) produce single-frame 3D occupancy validated against LiDAR. Project page: https://mmwave-inverse-rendering.github.io/

cs.CV↗

arXiv2026

mmFHE: mmWave Sensing with End-to-End Fully Homomorphic Encryption

We present mmFHE, the first system that executes the entire cloud-side mmWave sensing pipeline including the DSP and ML inference under fully homomorphic encryption (FHE). mmFHE encrypts range profiles on an edge device after lightweight plaintext preprocessing and executes the entire mmWave signal-processing and ML inference pipeline homomorphically on a semi-honest cloud that operates exclusively on ciphertexts. At the core of mmFHE is a library of seven composable, data-oblivious FHE kernels that replace standard DSP routines with fixed arithmetic circuits for different application-specific pipelines. We demonstrate this approach on two representative tasks: vital-sign monitoring and gesture recognition. We formally prove two cryptographic guarantees for any pipeline assembled from this library: input privacy and data obliviousness. These guarantees effectively neutralize various supervised and unsupervised privacy attacks on raw data, including re-identification and data-dependent privacy leakage. Evaluation on three public radar datasets shows that encryption introduces negligible error versus the plaintext pipeline, with 84.5% gesture accuracy (vs. 84.7%). End-to-end cloud GPU latency is 1.21 s per 10 s vital-sign window and 5.76 s per 3 s gesture window. These results establish the initial feasibility of end-to-end mmWave sensing under FHE on commodity hardware.

cs.CR↗

arXiv2025

Feasibility of Radio Frequency Based Wireless Sensing of Lead Contamination in Soil

Widespread Pb (lead) contamination of urban soil significantly impacts food safety and public health and hinders city greening efforts. However, most existing technologies for measuring Pb are labor-intensive and costly. In this study, we propose SoilScanner, a radio frequency-based wireless system that can detect Pb in soils. This is based on our discovery that the propagation of different frequency band radio signals is affected differently by different salts such as NaCl and Pb(NO3)2 in the soil. In a controlled experiment, manually adding NaCl and Pb(NO3)2 in clean soil, we demonstrated that different salts reflected signals at different frequencies in distinct patterns. In addition, we confirmed the finding using uncontrolled field samples with a machine learning model. Our experiment results show that SoilScanner can classify soil samples into low-Pb and high-Pb categories (threshold at 200 ppm) with an accuracy of 72%, with no sample with > 500 ppm of Pb being misclassified. The results of this study show that it is feasible to build portable and affordable Pb detection and screening devices based on wireless technology.

cs.ET↗

arXiv2025

PrivyWave: Privacy-Aware Wireless Sensing of Heartbeat

Wireless sensing technologies can now detect heartbeats using radio frequency and acoustic signals, raising significant privacy concerns. Existing privacy solutions either protect from all sensing systems indiscriminately preventing any utility or operate post-data collection, failing to enable selective access where authorized devices can monitor while unauthorized ones cannot. We present a key-based physical obfuscation system, PrivyWave, that addresses this challenge by generating controlled decoy heartbeat signals at cryptographically-determined frequencies. Unauthorized sensors receive a mixture of real and decoy signals that are indistinguishable without the secret key, while authorized sensors use the key to filter out decoys and recover accurate measurements. Our evaluation with 13 participants demonstrates effective protection across both sensing modalities: for mmWave radar, unauthorized sensors show 21.3 BPM mean absolute error while authorized sensors maintain a much smaller 5.8 BPM; for acoustic sensing, unauthorized error increases to 42.0 BPM while authorized sensors achieve 9.7 BPM. The system operates across multiple sensing modalities without per-modality customization and provides cryptographic obfuscation guarantees. Performance benchmarks show robust protection across different distances (30-150 cm), orientations (120{\deg} field of view), and diverse indoor environments, establishing physical-layer obfuscation as a viable approach for selective privacy in pervasive health monitoring.

cs.CR↗

arXiv2025

SoilSound: Smartphone-based Soil Moisture Estimation

Soil moisture monitoring is essential for agriculture and environmental management, yet existing methods require either invasive probes disturbing the soil or specialized equipment, limiting access to the public. We present SoilSound, an ubiquitous accessible smartphone-based acoustic sensing system that can measure soil moisture without disturbing the soil. We leverage the built-in speaker and microphone to perform a vertical scan mechanism to accurately measure moisture without any calibration. Unlike existing work that use transmissive properties, we propose an alternate model for acoustic reflections in soil based on the surface roughness effect to enable moisture sensing without disturbing the soil. The system works by sending acoustic chirps towards the soil and recording the reflections during a vertical scan, which are then processed and fed to a convolutional neural network for on-device soil moisture estimation with negligible computational, memory, or power overhead. We evaluated the system by training with curated soils in boxes in the lab and testing in the outdoor fields and show that SoilSound achieves a mean absolute error (MAE) of 2.39% across 10 different locations. Overall, the evaluation shows that SoilSound can accurately track soil moisture levels ranging from 15.9% to 34.0% across multiple soil types, environments, and users; without requiring any calibration or disturbing the soil, enabling widespread moisture monitoring for home gardeners, urban farmers, citizen scientists, and agricultural communities in resource-limited settings.

cs.SD↗

arXiv2024

WixUp: A General Data Augmentation Framework for Wireless Perception in Tracking of Humans

Recent advancements in wireless perception technologies, including mmWave, WiFi, and acoustics, have expanded their application in human motion tracking and health monitoring. They are promising alternatives to traditional camera-based perception systems, thanks to their efficacy under diverse conditions or occlusions, and enhanced privacy. However, the integration of deep learning within this field introduces new challenges such as the need for extensive training data and poor model generalization, especially with sparse and noisy wireless point clouds. As a remedy, data augmentation is one solution well-explored in other deep learning fields, but they are not directly applicable to the unique characteristics of wireless signals. This motivates us to propose a custom data augmentation framework, WixUp, tailored for wireless perception. Moreover, we aim to make it a general framework supporting various datasets, model architectures, sensing modalities, and tasks; while previous wireless data augmentation or generative simulations do not exhibit this generalizability, only limited to certain use cases. More specifically, WixUp can reverse-transform lossy coordinates into dense range profiles using Gaussian mixture and probability tricks, making it capable of in-depth data diversity enhancement; and its mixing-based method enables unsupervised domain adaptation via self-training, allowing training of the model with no labels from new users or environments in practice. In summary, our extensive evaluation experiments show that WixUp provides consistent performance improvement across various scenarios and outperforms the baselines.

cs.NI↗

arXiv2023

Beyond-Voice: Towards Continuous 3D Hand Pose Tracking on Commercial Home Assistant Devices

The surging popularity of home assistants and their voice user interface (VUI) have made them an ideal central control hub for smart home devices. However, current form factors heavily rely on VUI, which poses accessibility and usability issues; some latest ones are equipped with additional cameras and displays, which are costly and raise privacy concerns. These concerns jointly motivate Beyond-Voice, a novel high-fidelity acoustic sensing system that allows commodity home assistant devices to track and reconstruct hand poses continuously. It transforms the home assistant into an active sonar system using its existing onboard microphones and speakers. We feed a high-resolution range profile to the deep learning model that can analyze the motions of multiple body parts and predict the 3D positions of 21 finger joints, bringing the granularity for acoustic hand tracking to the next level. It operates across different environments and users without the need for personalized training data. A user study with 11 participants in 3 different environments shows that Beyond-Voice can track joints with an average mean absolute error of 16.47mm without any training data provided by the testing subject.

cs.SD↗

arXiv2018

Living IoT: A Flying Wireless Platform on Live Insects

Sensor networks with devices capable of moving could enable applications ranging from precision irrigation to environmental sensing. Using mechanical drones to move sensors, however, severely limits operation time since flight time is limited by the energy density of current battery technology. We explore an alternative, biology-based solution: integrate sensing, computing and communication functionalities onto live flying insects to create a mobile IoT platform. Such an approach takes advantage of these tiny, highly efficient biological insects which are ubiquitous in many outdoor ecosystems, to essentially provide mobility for free. Doing so however requires addressing key technical challenges of power, size, weight and self-localization in order for the insects to perform location-dependent sensing operations as they carry our IoT payload through the environment. We develop and deploy our platform on bumblebees which includes backscatter communication, low-power self-localization hardware, sensors, and a power source. We show that our platform is capable of sensing, backscattering data at 1 kbps when the insects are back at the hive, and localizing itself up to distances of 80 m from the access points, all within a total weight budget of 102 mg.

cs.NI↗

arXiv2018

Technology-Enabled Disinformation: Summary, Lessons, and Recommendations

Technology is increasingly used -- unintentionally (misinformation) or intentionally (disinformation) -- to spread false information at scale, with potentially broad-reaching societal effects. For example, technology enables increasingly realistic false images and videos, and hyper-personal targeting means different people may see different versions of reality. This report is the culmination of a PhD-level special topics course (https://courses.cs.washington.edu/courses/cse599b/18au/) in Computer Science & Engineering at the University of Washington's Paul G. Allen School in the fall of 2018. The goals of this course were to study (1) how technologies and today's technical platforms enable and support the creation and spread of such mis- and disinformation, as well as (2) how technical approaches could be used to mitigate these issues. In this report, we summarize the space of technology-enabled mis- and disinformation based on our investigations, and then surface our lessons and recommendations for technologists, researchers, platform designers, policymakers, and users.

cs.CY↗

arXiv2014

Wi-Fi Gesture Recognition on Existing Devices

This paper introduces the first wireless gesture recognition system that operates using existingWi-Fi signals and devices. To achieve this, we first identify limitations of existing wireless gesture recognition approaches that limit their applicability to Wi-Fi. We then introduce algorithms that can classify gestures using information that is readily available on Wi-Fi devices. We demonstrate the feasibility of our design using a prototype implementation on off-the-shelf Wi-Fi devices. Our results show that we can achieve a classification accuracy of 91% while classifying four gestures across six participants, without the need for per-participant training. Finally, we show the feasibility of gesture recognition in non-line-ofsight situations with the participants interacting with a Wi-Fi device placed in a backpack.

cs.HC↗