arXiv subjects

Raja Sen

Publications and source records attributed to Raja Sen.

7 recordsLinked to original sources

arXiv2025

Plasmascopy of ultrafast hot charges in solids

We demonstrate an electric field-resolved approach for probing ultrafast dynamics of photoinjected charges in solids. Direct access to the electric field of few-cycle pulses enables us to measure a broadband response of a medium with associated plasma frequency. We prepare an ensemble of photoinjected hot charge carriers with energies sufficient to trigger impact ionization and establish a framework to measure its dynamics. Our study reveals the first time-resolved observation of the short-lived ultrafast impact ionization in germanium counteracted by trapping of mobile charges at later times. This approach provides a promising route for studying ultrafast many-body physics in photoexcited solids, with predictions from advanced theoretical models.

cond-mat.other↗

arXiv2025

Unraveling energy flow mechanisms in semiconductors by ultrafast spectroscopy: Germanium as a case study

Semiconductor materials are the foundation of modern electronics, and their functionality is dictated by the interactions between fundamental excitations occurring on (sub-)picosecond timescales. Using time-resolved Raman spectroscopy and transient reflectivity measurements, we shed light on the ultrafast dynamics in germanium. We observe an increase in the optical phonon temperature in the first few picoseconds, driven by the energy transfer from photoexcited holes, and the subsequent decay into acoustic phonons through anharmonic coupling. Moreover, the temperature, Raman frequency, and linewidth of this phonon mode show strikingly different decay dynamics. This difference was ascribed to the local thermal strain generated by the ultrafast excitation. We also observe Brillouin oscillations, given by a strain pulse traveling through germanium, whose damping is correlated to the optical phonon mode. These findings, supported by density functional theory and molecular dynamics simulations, provide a better understanding of the energy dissipation mechanisms in semiconductors.

cond-mat.mtrl-sci↗

arXiv2024

Unveiling the structural, chemical state, and optical band-gap evolution of Ta-doped epitaxial SrTiO3 thin films using first-principles calculations and spectroscopic ellipsometry

In this report, the optical properties of Ta doped SrTiO3 (STO) due to its potential in transparent conducting oxides (TCOs) is explored by a combination of theoretical studies based on density functional theory and spectroscopic ellipsometry. To achieve this theoretically, we vary the concentration of Ta from 0 - 12.5% in SrTi1-xTaxO3 system by substitutional doping and report its effect on the resulting structural, chemical, electronic, chemical, and optical properties. Additionally, we perform band unfolding to shed light on the true nature of optical transitions due to Ta doping. We verify these results experimentally by fabricating epitaxial SrTi1-xTaxO3 thin films ( x = 0 - 5%) by pulsed laser deposition and obtain the optical dielectric properties of the system with the help of spectroscopic ellipsometry. By combining theoretical and experimental studies, we provide evidence that the band gap of STO increases due to Ta doping while also enhancing its electronic properties. The findings of our study offer an extensive understanding of the intricacies associated with elemental doping in perovskite oxides and propose strategies for addressing obstacles associated with TCOs.

cond-mat.mtrl-sci↗

arXiv2024

Occurrence of the collective Ziman limit of heat transport in cubic semiconductors: scattering channels and size effects

In this work, we discuss the possibility of reaching the Ziman conditions for collective heat transport in cubic bulk semiconductors, such as Si, Ge, AlAs and AlP. In natural and enriched silicon and germanium, the collective heat transport limit is impossible to reach due to strong isotopic scattering. However, we show that in hyperenriched silicon and germanium, as well as in materials with one single stable isotope like AlAs and AlP, at low temperatures, normal scattering plays an important role, making the observation of the collective heat transport possible. We further discuss the effects of sample sizes, and analyse our results for cubic materials by comparing them to bulk bismuth, in which second sound has been detected at cryogenic temperatures. We find that collective heat transport in cubic semiconductors studied in this work is expected to occur at temperatures between 10 and 20 K.

cond-mat.mtrl-sci↗

arXiv2023

Role of Dimensionality and Size in Controlloing the Drag Seebeck Coefficient of Doped Silicon Nanostructures: A Fundamental Understanding

In this theoretical study, we examine the influence of dimensionality, size reduction, and heat-transport direction on the phonon-drag contribution to the Seebeck coefficient of silicon nanostructures. Phonon-drag contribution, which arises from the momentum transfer between out-of-equilibrium phonon populations and charge carriers, significantly enhances the thermoelectric coefficient. Our implementation of the phonon drag term accounts for the anisotropy of nanostructures, such as thin films and nanowires, through the boundary- and momentum-resolved phonon lifetime. Our approach also takes into account the spin-orbit coupling which turns out to be crucial for hole transport. We reliably quantify the phonon drag contribution at various doping levels, temperatures, and nanostructure geometries for both electrons and holes in silicon nanostructures. Our results support the recent experimental findings, showing that a part of phonon drag contribution survives in 100 nm silicon nanostructures.

cond-mat.mtrl-sci↗

arXiv2018

Comment on "Structure Prediction of Li-Sn and Li-Sb Intermetallics for Lithium-Ion Batteries Anodes''

In a recently published article Mayo et al.[Chemistry of Materials 2017, 29, 5787] presented the ground state crystal structures of various experimentally unknown Li-Sn intermetallic compounds at ambient pressure (~0 GPa) and 0 K temperature using ab-initio random structure searching method (AIRSS) with high-throughput screening from the Inorganic Crystal Structure Database (ICSD).\cite{AIRSS} In their study, besides the experimentally known phases of Li-Sn such as, $\mathrm{Li_{2}Sn_{5}}$ ($\mathrm{P4/mbm}$),$\mathrm{Li_{1}Sn_{1}}$ ($\mathrm{P2/m}$, $\mathrm{I4_{1}/amd}$), $\mathrm{Li_{7}Sn_{3}}$ ($\mathrm{P2_{1}/m}$), $\mathrm{Li_{5}Sn_{2}}$ ($\mathrm{R\bar{3}m}$), $\mathrm{Li_{13}Sn_{5}}$ ($\mathrm{P\bar{3}m1}$), $\mathrm{Li_{7}Sn_{2}}$ ($\mathrm{Cmmm}$), and $\mathrm{Li_{17}Sn_{4}}$ ($\mathrm{F\bar{4}3m}$), Mayo et al. also reported two previously unknown stable phases for Li-Sn such as, $\mathrm{Li_{8}Sn_{3}}$-$\mathrm{R\bar{3}m}$ and $\mathrm{Li_{7}Sn_{2}}$-$\mathrm{P\bar{1}}$ along with several Li-Sn metastable phases ($\mathrm{Li_{1}Sn_{2}}$, $\mathrm{Li_{2}Sn_{3}}$, $\mathrm{Li_{7}Sn_{9}}$, $\mathrm{Li_{3}Sn_{2}}$, $\mathrm{Li_{5}Sn_{3}}$, $\mathrm{Li_{2}Sn}_{1}$, $\mathrm{Li_{3}Sn_{1}}$, $\mathrm{Li_{4}Sn_{1}}$, $\mathrm{Li_{5}Sn_{1}}$, and $\mathrm{Li_{7}Sn_{1}}$) which lie within 20 meV/atom from the convex hull tie-line. However, while going through their article, we noticed a significant inconsistency and contradictions in their results. Moreover, a one-to-one comparison with our published results\cite{Sen@2017} revealed a disagreement in the symmetry of $\mathrm{Li_{3}Sn_{1}}$, $\mathrm{Li_{7}Sn_{2}}$, $\mathrm{Li_{4}Sn_{1}}$, $\mathrm{Li_{5}Sn_{1}}$, and $\mathrm{Li_{7}Sn_{1}}$ discussed by Mayo et al.}

cond-mat.mtrl-sci↗

arXiv2016

Pressure Induced Thermodynamically Stable and Mechanically Robust Li-rich Unknown Li-Sn Compounds: A Step Towards Improvement of Li-Sn Batteries

Volume expansion and elastic softening of Sn anode on lithiation result in mechanical degradation and pulverization of Sn, affecting the overall performance of Li-Sn batteries. It can however be overcome by using exotic high pressure quenched phase as prelithiated reagent. Moreover, it is known that under pressure many unusual stoichiometric which are basically impossible at ambient pressure, can be synthesized, that may even survive the decompression from high to ambient pressure.We therefore have performed a comprehensive study using evolutionary algorithm and density functional theory based simulations to understand the lithiation of Sn anode at pressure ranging from 1 atm to 20 GPa. The ground state structures of all stable and metastable Li-Sn compounds have been identified at ambient and moderate pressures and their properties have been studied to understand the role of pressure in re-defining the reaction mechanism during charging-discharging process in Li-ion batteries. Besides the well-known existing Li-Sn compounds, our studies reveal the existence of five unreported stoichiometries (Li8Sn3, Li3Sn1, Li4Sn1, Li5Sn1, and Li7Sn1) and their associated crystal structures at ambient and high pressure. While Li8Sn3 has been identified as one of the most stable Li-Sn compound in the entire pressure range (1 atm-20 GPa), the pressure induced Li-rich compounds like Li5Sn1 and Li7Sn1 have been classified as providing higher theoretical gravimetric capacity of 1129 and 1580 mAh/g), respectively, than the capacity of the known most lithiated phase, i.e., Li17Sn4 (960 mAh/g).Most importantly, our calculations show reduction in volume expansion by ~ 50% at 20 GPa, and reveal that the application of pressure can reduce the chance of Li plating and improve the mechanical properties, which are desired to make the battery safer and its life longer.

cond-mat.mtrl-sci↗