arXiv subjects

R. Russo

Publications and source records attributed to R. Russo.

At least 19 recordsLinked to original sources

arXiv2026

Development for the Belle II vertex detector upgrade with depleted monolithic active pixel sensors

The vertex detector upgrade project for the Belle II experiment, based on CMOS depleted monolithic active pixel sensor technology, is planned to be carried out in conjunction with the major modification of the interaction region of the SuperKEKB collider during Long Shutdown 2 from 2032 to 2034. The MAPS sensor, named OBELIX currently under development, is derived from the successor to TJ-Monopix2, with modifications implemented to ensure compatibility with the Belle II trigger system. The new vertex detector consists of two layers of four self-supported consecutive OBELIX sensors, and three layers of discrete OBELIX sensors mounted on mechanical support structures with readout flex circuits attached to the sensors. The detector is arranged cylindrically around the beam pipe at radii ranging from 14 mm to 140 mm. The minimization of the material budget is required in order to enhance physics performance. We present an overview of the project and its latest developments, with particular emphasis on the development of low-material-budget flex circuits employing aluminum conductors.

physics.ins-det↗

arXiv2026

Application of exhaustive simulation flow for advanced performance prediction of monolithic active pixel sensors

Monolithic active pixel sensor (MAPS) developments have pushed the detection performance in various directions, especially relative to timing where nanosecond-level precision is now considered. This evolution calls for a simultaneous upgrade of the simulation tools. We have developed a simulation flow that covers steps from the signal creation in the sensitive volume to the output of the pixel digital logic that performs the time-of-arrival and time-over-threshold (ToA/ToT) measurements. This approach adds several new features to the traditional use the of the TCAD - Allpix Squared duo, among which : the integration of the pixel wells from the layout in order to precisely describe the pixel key characteristics such as leakage and punch-through currents and the coupling of Monte Carlo simulations (Allpix Squared) with high precision electrical simulations (SPICE). The first (Allpix Squared) for the precise description of the current induced at the collection electrode and the second (SPICE) to guarantee high precision simulation of the front-end electronics using realistic signal events. Irradiation is also modeled, both from the charge propagation side (charge trapping) and from the front-end response side (high input signal discharge). We have applied this methodology to the MAPS developed in the context of the Belle II vertex detector upgrade. In this contribution, we detail the key features of the exhaustive simulation flow, present the outcome of the comparison with the TJ-Monopix2 measurements and discuss the interest of the methodology for the development of modern MAPS.

physics.ins-det↗

arXiv2025

Superconducting microwave oscillators as detectors for ESR spectroscopy

Microwave superconducting resonators are extensively studied in fields such as quantum computing and electron spin resonance (ESR) spectroscopy. However, the integration of superconducting resonators with feedback mechanisms to create ultra-low noise oscillators is a relatively unexplored area, and the application of such oscillators in ESR spectroscopy has not yet been demonstrated. In this work, we report the design, fabrication, and application of microwave oscillators based on superconducting resonators for ESR spectroscopy, illustrating an alternative way for the improvement of the performance of oscillator based ESR sensors. Specifically, ESR spectra are obtained by measuring the oscillator's frequency shift induced by the ESR effect as a function of the applied static magnetic field. The oscillators are composed of a single heterojunction bipolar transistor (HBT) or high electron mobility transistor (HEMT) coupled with NbTi or YBa$_2$Cu$_3$O$_7$ (YBCO) superconducting resonators. The fabricated oscillators operate at frequencies of 0.6 and 1.7 GHz and temperatures up to 80 K (for YBCO resonators) and 8 K (for NbTi resonators). The lowest measured frequency noise is about 9 mHz/Hz$^{1/2}$ (-139 dBc/Hz), the best spin sensitivity is about $1\times10^{10}$ spins/Hz$^{1/2}$, and the best concentration sensitivity is about $3\times10^{18}$ spins/Hz$^{1/2}$m$^3$. The approach proposed in this work should allow for significantly better spin and concentration sensitivities compared to those achievable with normal conductors, up to operating frequencies, magnetic fields, and temperatures where superconductors exhibit substantially lower effective microwave resistance than normal conductors.

physics.app-ph↗

arXiv2020

Conditioning of Superconductive Properties in Graph-Shaped Reticles

We report on phenomena observed in planar integrated networks obtained connecting superconducting island by Josephson tunnel junctions. These networks, identifiable as tree-like graphs, have branches consisting of series arrays of Josephson junctions which can be individually current biased and characterized. Both Josephson supercurrents and gap parameters of the arrays embedded in the graph structures display properties significantly different from those of reference arrays fabricated on the same chips and having identical geometrical shape. The temperature and magnetic field dependencies of the Josephson current of the embedded arrays both show a singular behavior when a critical value is reached by the Josephson characteristic energy. The gap parameter of the junctions generating the embedded arrays is higher than that of the junctions forming the reference geometrical arrays.

cond-mat.supr-con↗

arXiv2017

Free-space graphene/silicon photodetectors operating at 2 micron

This paper presents the design, the fabrication and the characterization of Schottky graphene/silicon photodetectors, operating at both 2 micron and room temperature. The graphene/silicon junction has been carefully: characterized device shows a non ideal behaviour with the increasing temperature and the interfacial trap density has been measured as 1.1x10^14 eV^-1cm^-2. Photodetectors are characterized by an internal (external) responsivity of 10.3 mA/W (0.16 mA/W) in an excellent agreement with the theory. Our devices pave the way for developing hybrid graphene-Si free-space illuminated PDs operating at 2 micron, for free-space optical communications, optical coherence tomography and light-radars.

physics.app-ph↗

arXiv2013

Characterization of Anomalous Pair Currents in Josephson Junction Networks

Measurements performed on superconductive networks shaped in the form of planar graphs display anomalously large currents when specific branches are biased. The temperature dependencies of these currents evidence that their origin is due to Cooper pair hopping through the Josephson junctions connecting the superconductive islands of the array. The experimental data are discussed in terms of a theoretical model which predicts, for the system under consideration, an inhomogeneous Cooper pair distribution on the superconductive islands of the network.

cond-mat.supr-con↗

arXiv2010

Current Noise Investigation in Josephson Devices by Switching Current Measurements

An experimental investigation of the critical current noise in underdamped niobium based Josephson junctions by a technique based on the switching current measurements is reported. By sweeping the junction with a current ramp we measure the critical current switching using the standard time of flight technique and analyze the data to extract the current noise. The experimental results show a linear behavior of the current white noise from both the junction area and the temperature. These measurement provide very useful information about the intrinsic noise of Josephson devices involving SQUIDs and qubits.

cond-mat.supr-con↗

arXiv2006

Topology-Induced Critical Current Enhancement in Josephson Networks

We investigate the properties of Josephson junction networks with inhomogeneous architecture. The networks are shaped as "quare comb" planar lattices on which Josephson junctions link superconducting islands arranged in the plane to generate the pertinent topology. Compared to the behavior of reference linear arrays, the temperature dependencies of the Josephson currents of the branches of the network exhibit relevant differences. The observed phenomena evidence new and surprising behavior of superconducting Josephson arrays as well as remarkable similarities with bosonic junction arrays.

cond-mat.supr-con↗

arXiv2006

Inhomogeneous Superconductivity in Comb-Shaped Josephson Junction Networks

We show that some of the Josephson couplings of junctions arranged to form an inhomogeneous network undergo a non-perturbative renormalization provided that the network's connectivity is pertinently chosen. As a result, the zero-voltage Josephson critical currents $I_c$ turn out to be enhanced along directions selected by the network's topology. This renormalization effect is possible only on graphs whose adjacency matrix admits an hidden spectrum (i.e. a set of localized states disappearing in the thermodynamic limit). We provide a theoretical and experimental study of this effect by comparing the superconducting behavior of a comb-shaped Josephson junction network and a linear chain made with the same junctions: we show that the Josephson critical currents of the junctions located on the comb's backbone are bigger than the ones of the junctions located on the chain. Our theoretical analysis, based on a discrete version of the Bogoliubov-de Gennes equation, leads to results which are in good quantitative agreement with experimental results.

cond-mat.supr-con↗

arXiv2004

Anomalous thermal escape in Josephson systems perturbed by microwaves

We investigate, by experiments and numerical simulations, thermal activation processes of Josephson tunnel junctions in the presence of microwave radiation. When the applied signal resonates with the Josephson plasma frequency oscillations, the switching current may become multi-valued temperature ranges both below and above the the classical to quantum crossover temperature. Switching current distributions are obtained both experimentally and numerically at temperatures both near and far above the quantum crossover temperature. Plots of the switching currents traced as a function of the applied signal frequency show very good agreement with a simple anharmonic theory for Josephson resonance frequency as a function of bias current. Throughout, experimental results and direct numerical simulations of the corresponding thermally driven classical Josephson junction model show very good agreement.

cond-mat.stat-mech↗

arXiv2004

High quality superconducting niobium films produced by Ultra High Vacuum Cathodic Arc

The vacuum arc is a well-known technique to produce coating with enhanced adhesion and film density. Many cathodic arc deposition systems are actually in use in industry and research. They all work under (high) vacuum conditions in which water vapor pressure is an important source of film contamination, especially in the pulsed arc mode of operation. Here we present a Cathodic Arc system working under Ultra High Vacuum conditions (UHVCA). UHVCA has been used to produce ultra-pure niobium films with excellent structural and electrical properties at a deposition temperature lower than 100oC. The UHVCA technique therefore opens new perspectives for all applications requiring ultra-pure films or, as in the case of Plasma Immersion Ion Implantation, ultra-pure plasmas.

cond-mat.supr-con↗

arXiv2004

Microwave-induced thermal escape in Josephson junctions

We investigate, by experiments and numerical simulations, thermal activation processes of Josephson tunnel junctions in the presence of microwave radiation. When the applied signal resonates with the Josephson plasma frequency oscillations, the switching current may become multi-valued in a temperature range far exceeding the classical to quantum crossover temperature. Plots of the switching currents traced as a function of the applied signal frequency show very good agreement with the functional forms expected from Josephson plasma frequency dependencies on the bias current. Throughout, numerical simulations of the corresponding thermally driven classical Josephson junction model show very good agreement with the experimental data.

cond-mat.supr-con↗

arXiv2001

N=2 Gauge Theories and Systems with Fractional Branes

We analyse the Seiberg Witten curve describing the N=2 gauge theory dual to the supergravity solution with fractional branes. Emphasis is given to those aspects that are related to stringy mechanism known as the enhancon. We also compare our results with the features of the supergravity duals, which have been variously interpreted in the literature. Known aspects of the N=2 gauge theories seem to agree with the supergravity solution, whenever the two theories can be faithfully compared.

hep-th↗

arXiv2000

Is a classical description of stable non-BPS D-branes possible?

We study the classical geometry produced by a stack of stable (i.e. tachyon free) non-BPS D-branes present in K3 compactifications of type II string theory. This classical representation is derived by solving the equations of motion describing the low-energy dynamics of the supergravity fields which couple to the non-BPS state. Differently from what expected, this configuration displays a singular behaviour: the space-time geometry has a repulson-like singularity. This fact suggests that the simplest setting, namely a set of coinciding non-interacting D-branes, is not acceptable. We finally discuss the possible existence of other acceptable configurations corresponding to more complicated bound states of these non-BPS branes.

hep-th↗

arXiv2000

Irreversibility Line in Nb/CuMn Multilayers with a Regular Array of Antidots

The transport properties of Nb/CuMn multilayers with a regular array of electron beam lithography obtained antidots have been measured at different temperatures in the presence of external perpendicular magnetic fields. Hysteretical I-V characteristics have been observed which disappear when approaching the upper critical magnetic field curve H_{c2}(T). Comparing these data with other results (Arrhenius plots of resistive transition curves, logV-logI characteristics) we have been able to relate the onset of the hysteresis to the presence of an irreversibility line. We discuss several possible mechanisms to clarify the nature of this line. Among them the most plausible seems to be the vortex melting mainly induced by quantum fluctuations.

cond-mat.supr-con↗

arXiv1999

Stable non-BPS states in string theory: a pedagogical review

We present a pedagogical review of the stable non-BPS states in string theory which have recently attracted some attention in the literature. In particular, following the analysis of A. Sen, we discuss in detail the case of the stable non-BPS D-particle of Type I theory whose existence is predicted (and required) by the heterotic/Type I duality. We show that this D-particle originates from an unstable bound state formed by a D1/anti-D1 pair of Type IIB in which the tachyon field acquires a solitonic kink configuration. The mechanism of tachyon condensation is discussed first at a qualitative level and then with an exact conformal field theory analysis.

hep-th↗

arXiv1998

Ramond-Ramond (boundary) states

The description of D-branes as boundary states for type II string theories (in the covariant formulation) requires particular care in the R-R sector. Also the vertices for R-R potentials that can couple to D-branes need a careful handling. As an illustration of this, the example of the D0-D8 system is reviewed, where a ``microscopic'' description of the interaction via exchange of R-R potentials becomes possible.

hep-th↗

arXiv1998

The Lorentz force between D0 and D6 branes in string and M(atrix) theory

We use different techniques to analyze the system formed by a D0 brane and a D6 brane (with background gauge fields) in relative motion. In particular, using the closed string formalism of boosted boundary states, we show the presence of a term linear in the velocity, corresponding to the Lorentz force experienced by the D0 brane moving in the magnetic background produced by the D6 brane. This term, that was missed in previous analyses of this system, comes entirely from the R-R odd spin structure and is also reproduced by a M(atrix) theory calculation.

hep-th↗