arXiv subjects

R. Patel

Publications and source records attributed to R. Patel.

8 recordsLinked to original sources

arXiv2023

Modelling of COVID-19 Using Fractional Differential Equations

In this work, we have described the mathematical modeling of COVID-19 transmission using fractional differential equations. The mathematical modeling of infectious disease goes back to the 1760s when the famous mathematician Daniel Bernoulli used an elementary version of compartmental modeling to find the effectiveness of deliberate smallpox inoculation on life expectancy. We have used the well-known SIR (Susceptible, Infected and Recovered) model of Kermack & McKendrick to extend the analysis further by including exposure, quarantining, insusceptibility and deaths in a SEIQRDP model. Further, we have generalized this model by using the solutions of Fractional Differential Equations to test the accuracy and validity of the mathematical modeling techniques against Canadian COVID-19 trends and spread of real-world disease. Our work also emphasizes the importance of Personal Protection Equipment (PPE) and impact of social distancing on controlling the spread of COVID-19.

physics.soc-ph↗

arXiv2021

A Mathematical Model of COVID-19 Transmission

Disease transmission is studied through disciplines like epidemiology, applied mathematics, and statistics. Mathematical simulation models for transmission have implications in solving public and personal health challenges. The SIR model uses a compartmental approach including dynamic and nonlinear behavior of transmission through three factors: susceptible, infected, and removed (recovered and deceased) individuals. Using the Lambert W Function, we propose a framework to study solutions of the SIR model. This demonstrates the applications of COVID-19 transmission data to model the spread of a real-world disease. Different models of disease including the SIR, SIRmp and SEIRpqr model are compared with respect to their ability to predict disease spread. Physical distancing impacts and personal protection equipment use are discussed with relevance to the COVID-19 spread.

q-bio.PE↗

arXiv2021

Investigating width distribution of slow and fast CMEs in solar cycles 23 and 24

Coronal Mass Ejections (CMEs) are highly dynamic events originating in the solar atmosphere, that show a wide range of kinematic properties and are the major drivers of the space weather. The angular width of the CMEs is a crucial parameter in the study of their kinematics. The fact that whether slow and fast CMEs (as based on their relative speed to the average solar wind speed) are associated with different processes at the location of their ejection is still debatable. Thus, in this study, we investigate their angular width to understand the differences between the slow and fast CMEs. We study the width distribution of slow and fast CMEs and find that they follow different power law distributions, with a power law indices ($\alpha$) of -1.1 and -3.7 for fast and slow CMEs respectively. To reduce the projection effects, we further restrict our analysis to only limb events as derived from manual catalog and we find similar results. We then associate the slow and fast CMEs to their source regions, and classified the sources as Active Regions (ARs) and Prominence Eruptions (PEs). We find that slow and fast CMEs coming from ARs and PEs, also follow different power laws in their width distributions. This clearly hints towards a possibility that different mechanisms might be involved in the width expansion of slow and fast CMEs coming from different sources.These results are also crucial from the space weather perspective since the width of the CME is an important factor in that aspect.

astro-ph.SR↗

arXiv2019

Imaging the 44 AU Kuiper Belt-analogue debris ring around HD 141569A with GPI polarimetry

We present the first polarimetric detection of the inner disk component around the pre-main sequence B9.5 star HD 141569A. Gemini Planet Imager H-band (1.65 micron) polarimetric differential imaging reveals the highest signal-to-noise ratio detection of this ring yet attained and traces structure inwards to 0.25" (28 AU at a distance of 111 pc). The radial polarized intensity image shows the east side of the disk, peaking in intensity at 0.40" (44 AU) and extending out to 0.9" (100 AU). There is a spiral arm-like enhancement to the south, reminiscent of the known spiral structures on the outer rings of the disk. The location of the spiral arm is coincident with 12CO J=3-2 emission detected by ALMA, and hints at a dynamically active inner circumstellar region. Our observations also show a portion of the middle dusty ring at ~220 AU known from previous observations of this system. We fit the polarized H-band emission with a continuum radiative transfer Mie model. Our best-fit model favors an optically thin disk with a minimum dust grain size close to the blow-out size for this system: evidence of on-going dust production in the inner reaches of the disk. The thermal emission from this model accounts for virtually all of the far-infrared and millimeter flux from the entire HD 141569A disk, in agreement with the lack of ALMA continuum and CO emission beyond ~100 AU. A remaining 8-30 micron thermal excess a factor of ~2 above our model argues for a yet-unresolved warm innermost 5-15 AU component of the disk.

astro-ph.SR↗

arXiv2018

Development of Precise Low Value Capacitance Measurement System for Cryogenics Two Phase Flow Application

In cryogenic two phase flow, it is always challenging to measure the quality and void fraction. In this regard, an effort has been made to indigenously develop an electronic circuit to measure the void fraction by measuring the capacitance of the order of picofarads accurately depending upon the dielectric constant of nitrogen in vapor and liquid phase. The state-of-art electronics card has been developed and tested successfully for its performance and validation. Using this card, an experiment has been conducted using liquid nitrogen cryo transfer line to study the two phase void fraction. In this paper, the design basis and working principle of the designed electronics card along with the performance results are discussed. A/D conversion and DAQ system has been implemented to display the direct measurement data in a computer.

physics.ins-det↗

arXiv2018

A High-performance Track Fitter for Use in Ultra-fast Electronics

This article describes a new charged-particle track fitting algorithm designed for use in high-speed electronics applications such as hardware-based triggers in high-energy physics experiments. Following a novel technique designed for fast electronics, the positions of the hits on the detector are transformed before being passed to a linearized track parameter fit. This transformation results in fitted track parameters with a very linear dependence on the hit positions. The approach is demonstrated in a representative detector geometry based on the CMS detector at the Large Hadron Collider. The fit is implemented in FPGA chips and optimized for track fitting throughput and obtains excellent track parameter performance. Such an algorithm is potentially useful in any high-speed track-fitting application.

physics.ins-det↗

arXiv2015

Discovery and spectroscopy of the young Jovian planet 51 Eri b with the Gemini Planet Imager

Directly detecting thermal emission from young extrasolar planets allows measurement of their atmospheric composition and luminosity, which is influenced by their formation mechanism. Using the Gemini Planet Imager, we discovered a planet orbiting the \$sim$20 Myr-old star 51 Eridani at a projected separation of 13 astronomical units. Near-infrared observations show a spectrum with strong methane and water vapor absorption. Modeling of the spectra and photometry yields a luminosity of L/LS=1.6-4.0 x 10-6 and an effective temperature of 600-750 K. For this age and luminosity, "hot-start" formation models indicate a mass twice that of Jupiter. This planet also has a sufficiently low luminosity to be consistent with the "cold- start" core accretion process that may have formed Jupiter.

astro-ph.EP↗

arXiv2009

The vector meson mass in the large N limit of QCD

The vector meson mass is computed as a function of quark mass in the large N limit of QCD. We use continuum reduction and directly compute the vector meson propagator in momentum space. Quark momentum is inserted using the quenched momentum prescription.

hep-lat↗