arXiv subjects

R. Manchester

Publications and source records attributed to R. Manchester.

15 recordsLinked to original sources

arXiv2024

Modelling The Radial Distribution of Pulsars in the Galaxy

The Parkes 20 cm Multibeam pulsar surveys have discovered nearly half of the known pulsars and revealed many distant pulsars with high dispersion measures. Using a sample of 1,301 pulsars from these surveys, we have explored the spatial distribution and birth rate of normal pulsars. The pulsar distances used to calculate the pulsar surface density are estimated from the YMW16 electron-density model. When estimating the impact of the Galactic background radiation on our survey, we projected pulsars in the Galaxy onto the Galactic plane, assuming that the flux density distribution of pulsars is uniform in all directions, and utilized the most up-to-date background temperature map. We also used an up-to-date version of the ATNF Pulsar Catalogue to model the distribution of pulsar flux densities at 1400 MHz. We derive an improved radial distribution for the pulsar surface density projected on to the Galactic plane, which has a maximum value at $\sim$4 kpc from the Galactic Centre. We also derive the local surface density and birthrate of pulsars, obtaining 47 $\pm$ 5 $\mathrm{kpc^{-2}}$ and $\sim$ 4.7 $\pm$ 0.5 $\mathrm{kpc^{-2}\ Myr^{-1}}$, respectively. For the total number of potentially detectable pulsars in the Galaxy, we obtain (1.1 $\pm$ 0.2) $\times$ $10^{4}$ and (1.1 $\pm$ 0.2) $\times$ $10^{5}$ before and after applying the TM98 beaming correction model. The radial distribution function is used to estimate the proportion of pulsars in each spiral arm and the Galactic centre.

astro-ph.HE↗

arXiv2023

RRAT J1913+1330: an extremely variable and puzzling pulsar

Rotating Radio Transients (RRATs) are neutron stars that emit sporadic radio bursts. We detected 1955 single pulses from RRAT J1913+1330 using the 19-beam receiver of the Five-hundred-meter Aperture Spherical Radio Telescope (FAST). These pulses were detected in 19 distinct clusters, with 49.4% of them occurring with a waiting time of one rotation period. The energy distribution of these individual pulses exhibited a wide range, spanning three orders of magnitude, reminiscent of repeating fast radio bursts (FRBs). Furthermore, we observed abrupt variations in pulse profile, width, peak flux, and fluence between adjacent sequential pulses. These findings suggest that this RRAT could be interpreted as a pulsar with extreme pulse-to-pulse modulation. The presence of sequential pulse trains during active phases, along with significant pulse variations in profile, fluence, flux, and width, should be intrinsic to a subset of RRATs. Our results indicate that J1913+1330 represents a peculiar source that shares certain properties with populations of nulling pulsars, giant pulses, and FRBs from different perspectives. The dramatic pulse-to-pulse variation observed in J1913+1330 could be attributed to unstable pair creation above the polar cap region and the variation of the site where streaming pairs emit coherently. Exploring a larger sample of RRATs exhibiting similar properties to J1913+1330 has the potential to significantly advance our understanding of pulsars, RRATs, and FRBs.

astro-ph.HE↗

arXiv2023

Searching for continuous Gravitational Waves in the second data release of the International Pulsar Timing Array

The International Pulsar Timing Array 2nd data release is the combination of datasets from worldwide collaborations. In this study, we search for continuous waves: gravitational wave signals produced by individual supermassive black hole binaries in the local universe. We consider binaries on circular orbits and neglect the evolution of orbital frequency over the observational span. We find no evidence for such signals and set sky averaged 95% upper limits on their amplitude h 95 . The most sensitive frequency is 10nHz with h 95 = 9.1 10-15 . We achieved the best upper limit to date at low and high frequencies of the PTA band thanks to improved effective cadence of observations. In our analysis, we have taken into account the recently discovered common red noise process, which has an impact at low frequencies. We also find that the peculiar noise features present in some pulsars data must be taken into account to reduce the false alarm. We show that using custom noise models is essential in searching for continuous gravitational wave signals and setting the upper limit.

gr-qc↗

arXiv2020

Searching for gravitational wave bursts from cosmic string cusps with the Parkes Pulsar Timing Array

Cosmic strings are potential gravitational wave (GW) sources that can be probed by pulsar timing arrays (PTAs). In this work we develop a detection algorithm for a GW burst from a cusp on a cosmic string, and apply it to Parkes PTA data. We find four events with a false alarm probability less than 1%. However further investigation shows that all of these are likely to be spurious. As there are no convincing detections we place upper limits on the GW amplitude for different event durations. From these bounds we place limits on the cosmic string tension of G mu ~ 10^{-5}, and highlight that this bound is independent from those obtained using other techniques. We discuss the physical implications of our results and the prospect of probing cosmic strings in the era of Square Kilometre Array (SKA).

gr-qc↗

arXiv2020

The two emission states of PSR B1534+12

We have observed PSR~B1534+12 (J1537+1155), a pulsar with a neutron star companion, using the Five-hundred-meter Aperture Spherical radio Telescope (FAST). We found that this pulsar shows two distinct emission states: a weak state with a wide pulse profile and a burst state with a narrow pulse profile. The weak state is always present. We cannot, with our current data, determine whether the pulse energy of the weak state follows a normal or a log-normal distribution. The burst state energy distribution follows a power-law. The amplitude of the single pulse emission in the burst state varies significantly; the peak flux intensity of the brightest pulse is 334 times stronger than that of the average pulse. We also examined the timing precision achievable using only bright pulses, which showed no demonstrable improvement because of pulse jitter and therefore quantified the jitter noise level for this pulsar.

astro-ph.HE↗

arXiv2010

Developing a pulsar-based timescale

We show how pulsar observations may be used to construct a time standard that is independent of terrestrial time standards. The pulsar time scale provides a method to determine the stability of terrestrial time standards over years to decades. Here, we summarise the method, provide initial results and discuss the possibilities and limitations of our pulsar time scale.

astro-ph.SR↗

arXiv2009

The international pulsar timing array project: using pulsars as a gravitational wave detector

The International Pulsar Timing Array project combines observations of pulsars from both Northern and Southern hemisphere observatories with the main aim of detecting ultra-low frequency (~10^-9 to 10^-8 Hz) gravitational waves. Here we introduce the project, review the methods used to search for gravitational waves emitted from coalescing supermassive binary black-hole systems in the centres of merging galaxies and discuss the status of the project.

astro-ph.SR↗

arXiv2009

Pulsar science with the Five hundred metre Aperture Spherical Telescope

With a collecting area of 70 000 m^2, the Five hundred metre Aperture Spherical Telescope (FAST) will allow for great advances in pulsar astronomy. We have performed simulations to estimate the number of previously unknown pulsars FAST will find with its 19-beam or possibly 100-beam receivers for different survey strategies. With the 19-beam receiver, a total of 5200 previously unknown pulsars could be discovered in the Galactic plane, including about 460 millisecond pulsars (MSPs). Such a survey would take just over 200 days with eight hours survey time per day. We also estimate that, with about 80 six-hour days, a survey of M31 and M33 could yield 50--100 extra-Galactic pulsars. A 19-beam receiver would produce just under 500 MB of data per second and requires about 9 tera-ops to perform the major part of a real time analysis. We also simulate the logistics of high-precision timing of MSPs with FAST. Timing of the 50 brightest MSPs to a signal-to-noise of 500 would take about 24 hours per epoch.

astro-ph.IM↗

arXiv2009

TEMPO2, a new pulsar timing package. III: Gravitational wave simulation

Analysis of pulsar timing data-sets may provide the first direct detection of gravitational waves. This paper, the third in a series describing the mathematical framework implemented into the tempo2 pulsar timing package, reports on using tempo2 to simulate the timing residuals induced by gravitational waves. The tempo2 simulations can be used to provide upper bounds on the amplitude of an isotropic, stochastic, gravitational wave background in our Galaxy and to determine the sensitivity of a given pulsar timing experiment to individual, supermassive, binary black hole systems.

astro-ph.SR↗

arXiv2008

Science with ASKAP - the Australian Square Kilometre Array Pathfinder

[ABRIDGED VERSION] The future of cm and m-wave astronomy lies with the Square Kilometre Array (SKA), a telescope under development by a consortium of 17 countries. The SKA will be 50 times more sensitive than any existing radio facility. A majority of the key science for the SKA will be addressed through large-area imaging of the Universe at frequencies from 300 MHz to a few GHz. The Australian SKA Pathfinder (ASKAP) is aimed squarely in this frequency range, and achieves instantaneous wide-area imaging through the development and deployment of phase-array feed systems on parabolic reflectors. This large field-of-view makes ASKAP an unprecedented synoptic telescope poised to achieve substantial advances in SKA key science. The central core of ASKAP will be located at the Murchison Radio Observatory in inland Western Australia, one of the most radio-quiet locations on the Earth and one of the sites selected by the international community as a potential location for the SKA. Following an introductory description of ASKAP, this document contains 7 chapters describing specific science programmes for ASKAP. The combination of location, technological innovation and scientific program will ensure that ASKAP will be a world-leading radio astronomy facility, closely aligned with the scientific and technical direction of the SKA. A brief summary chapter emphasizes the point, and considers discovery space.

astro-ph↗

arXiv2006

TEMPO2, a new pulsar timing package. I: Overview

Contemporary pulsar timing experiments have reached a sensitivity level where systematic errors introduced by existing analysis procedures are limiting the achievable science. We have developed tempo2, a new pulsar timing package that contains propagation and other relevant effects implemented at the 1ns level of precision (a factor of ~100 more precise than previously obtainable). In contrast with earlier timing packages, tempo2 is compliant with the general relativistic framework of the IAU 1991 and 2000 resolutions and hence uses the International Celestial Reference System, Barycentric Coordinate Time and up-to-date precession, nutation and polar motion models. Tempo2 provides a generic and extensible set of tools to aid in the analysis and visualisation of pulsar timing data. We provide an overview of the timing model, its accuracy and differences relative to earlier work. We also present a new scheme for predictive use of the timing model that removes existing processing artifacts by properly modelling the frequency dependence of pulse phase.

astro-ph↗

arXiv2004

Adaptive Filters Revisited - RFI Mitigation in pulsar observations

Pulsar detection and timing experiments are applications where adaptive filters seem eminently suitable tools for radio-frequency-interference (RFI) mitigation. We describe a novel variant which works well in field trials of pulsar observations centred on an observing frequency of 675 MHz, a bandwidth of 64 MHz and with 2-bit sampling. Adaptive filters have generally received bad press for RFI mitigation in radio astronomical observations with their most serious drawback being a spectral echo of the RFI embedded in the filtered signals. Pulsar observations are intrinsically less sensitive to this as they operate in the (pulsar period) time domain. The field trials have allowed us to identify those issues which limit the effectiveness of the adaptive filter. We conclude that adaptive filters can significantly improve pulsar observations in the presence of RFI.

astro-ph↗

arXiv2003

The ATNF Pulsar Catalogue

The number of known pulsars has significantly increased over the previous few years. We have searched the literature to find papers announcing the discovery of pulsars or giving improved parameters for them. Data from the papers have been entered into a new pulsar catalogue that can be accessed via a web interface or from the command line (on Solaris or Linux machines). The user may request over 120 different parameters, select pulsars of interest, generate custom variables and choose between different ways of displaying or tabulating the data. Full bibliographic references are available on all observed parameters.

astro-ph↗

arXiv1999

The Parkes Multibeam Pulsar Survey Data Release

The Parkes multibeam pulsar survey began in 1997 and is now about 50% complete. It has discovered more than 400 new pulsars so far, including a number of young, high magnetic field, and relativistic binary pulsars. Early results, descriptions of the survey and follow up timing programs can be found in papers by Lyne et al. (1999 MNRAS in press, astro-ph/9911313), Camilo et al. (astro-ph/9911185), and Manchester et al. (astro-ph/9911319). This paper describes the data release policy and how you can gain access to the raw data and details on the pulsars discovered.

astro-ph↗

arXiv1998

Comptel Detection of Pulsed Emission from PSR B1509-58 up to at Least 10 MeV

We report the COMPTEL detection of pulsed $γ$-emission from PSR B1509-58 up to at least 10 MeV using data collected over more than 6 years. The 0.75-10 MeV lightcurve is broad and reaches its maximum near radio-phase 0.38, slightly beyond the maximum found at hard X-rays/ soft $γ$-rays. In the 10-30 MeV energy range a strong source is present in the skymap positionally consistent with the pulsar, but we do not detect significant pulsed emission. However, the lightcurve is consistent with the pulse shape changing from a single broad pulse into a double-peak morphology. Our results significantly constrain pulsar modelling.

astro-ph↗