arXiv subjects

R. Jorge

Publications and source records attributed to R. Jorge.

At least 19 recordsLinked to original sources

arXiv2026

Nonlinear Landau Collisions Without Collision Tensors

Far-from-equilibrium plasmas require nonlinear Coulomb collisions, but direct three-dimensional Hermite discretization of the Landau operator needs an impractical dense tensor. By porting quantum chemistry Coulomb-integral methods, we reduce the six-dimensional integrals to one-center Coulomb moments and separable exponential-sum contractions. This gives a four-order-of-magnitude working-memory reduction and enables nonlinear relaxation tests. Numerical simulations preserve invariants and show that finite-basis linearization changes relaxation and produces a fourfold angular error.

physics.plasm-ph↗

arXiv2025

Data-Driven Approach to Model the Influence of Magnetic Geometry in the Confinement of Fusion Devices

The design of fusion energy devices involves a balance between competing performance metrics to achieve an energy gain. In stellarators, the geometry is very flexible and involves a large number of free parameters. These can be optimized to achieve good performance. One of the main optimization targets is omnigenity, that is, the confinement of alpha particles stemming from the fusion reactions. In this work, two classes of omnigenous stellarators are studied, namely quasisymmetric and quasi-isodynamic stellarators. The goal is to determine the influence of the geometry on omnigenity, which can lead to greater insight into the design space of stellarators. For this purpose, a database of stellarator configurations is created and analyzed for correlations, pair-wise distributions, and dimensionality reduction using a supervised autoencoder framework. Then, a classification model is trained on this database to predict the convergence of numerical solvers. Finally, two regression models, LightGBM and its probabilistic version, LightGBM LSS, as well as a feed-forward neural network, are trained to predict quasisymmetry and quasi-isodynamiticity and find the design parameters that most influence omnigenity.

physics.plasm-ph↗

arXiv2025

Axisymmetric Coil Winding Surfaces for Non-Axisymmetric Fusion Devices

Stellarators are fusion energy devices that confine a plasma using non-axisymmetric magnetic fields. Complex coils with tight construction tolerances are needed to create such fields. To simplify such coils, we use a method here to create filamentary curves bounded to a coil winding surface. This approach bypasses the need to find contours of the current potential in that surface while allowing gradients to be obtained for both the winding surface and the coil shapes. The parameterization of the coil curves allows the modeling of both modular and helical coils. As an application, we optimize a set of coils to reproduce a quasisymmetric stellarator equilibrium. A comparison is performed between coils parameterized in two different winding surfaces, namely an axisymmetric circular toroidal surface and a surface rescaled from the plasma boundary. Finally, an analysis is performed on the optimal distance between the plasma and the coil winding surface.

physics.plasm-ph↗

arXiv2024

Using Deep Learning to Design High Aspect Ratio Fusion Devices

The design of fusion devices is typically based on computationally expensive simulations. This can be alleviated using high aspect ratio models that employ a reduced number of free parameters, especially in the case of stellarator optimization where non-axisymmetric magnetic fields with a large parameter space are optimized to satisfy certain performance criteria. However, optimization is still required to find configurations with properties such as low elongation, high rotational transform, finite plasma beta, and good fast particle confinement. In this work, we train a machine learning model to construct configurations with favorable confinement properties by finding a solution to the inverse design problem, that is, obtaining a set of model input parameters for given desired properties. Since the solution of the inverse problem is non-unique, a probabilistic approach, based on mixture density networks, is used. It is shown that optimized configurations can be generated reliably using this method.

physics.plasm-ph↗

arXiv2024

Flexible Stellarator Physics Facility

We propose to build a Flexible Stellarator Physics Facility to explore promising regions of the vast parameter space of disruption-free stellarator solutions for Fusion Pilot Plants (FPPs).

physics.plasm-ph↗

arXiv2024

Simplified and Flexible Coils for Stellarators using Single-Stage Optimization

Single-stage optimization, also known as combined plasma-coil algorithms or direct coil optimization, has recently emerged as a possible method to expedite the design of stellarator devices by including, in a single step, confinement, stability, and engineering constraints. In this work, we show how such frameworks allow us to find new designs in a streamlined manner, yielding a broad range of new configurations. Examples are shown for stellarators with a small number of coils and quasisymmetric stellarators with only one to three coils per half field period, with external trim coils, helical coils, and a single set of coils generating both a quasi-axisymmetric and a quasi-helical equilibrium.

physics.plasm-ph↗

arXiv2024

Electron root optimisation for stellarator reactor designs

In this work, we propose a method of optimising stellarator devices to favour the presence of an electron root solution of the radial electric field. Such a solution can help avoid heavy impurity accumulation, improve neoclassical thermal ion confinement and helium ash exhaust and possibly reduce turbulence. This study shows that an optimisation for such a root is possible in quasi-isodynamic stellarators. Examples are shown for both vacuum and finite plasma pressure configurations.

physics.plasm-ph↗

arXiv2024

Tokamak to Stellarator Conversion using Permanent Magnets

With the advances in the optimization of magnetic field equilibria, stellarators have become a serious alternative to the tokamak, bringing this concept to the forefront of the pursuit of fusion energy. In order to be successful in experimentally demonstrating the viability of optimized stellarators, we must overcome any potential hurdles in the construction of its electromagnetic coils. Finding cost-effective ways of increasing the number of operating optimized stellarators could be key in cementing this magnetic confinement concept as a contender for a reactor. In this work, an alternative to modular coils, permanent magnets, are studied and are shown to enable the possibility of converting a tokamak into a stellarator. This is then applied to the case of ISTTOK tokamak, where an engineering design study is conducted.

physics.plasm-ph↗

arXiv2024

Stellarator equilibrium axis-expansion to all orders in distance from the axis for arbitrary plasma beta

A systematic theory of the asymptotic expansion of the magnetohydrodynamic (MHD) equilibrium in the distance from the magnetic axis is developed to include arbitrary smooth currents near the magnetic axis. Compared to the vacuum and the force-free system, an additional magnetic differential equation must be solved to obtain the pressure-driven currents. It is shown that there exist variables in which the rest of the MHD system closely mimics the vacuum system. Thus, a unified treatment of MHD fields is possible. The mathematical structure of the near-axis expansions to arbitrary order is examined carefully to show that the double-periodicity of physical quantities in a toroidal domain can be satisfied order by order. The essential role played by the normal form in solving the magnetic differential equations is highlighted. Several explicit examples of vacuum, force-free, and MHD equilibrium in different geometries are presented.

physics.plasm-ph↗

arXiv2023

Energetic Particle Tracing in Optimized Quasisymmetric Stellarator Equilibria

Recent developments in the design of magnetic confinement fusion devices have allowed the construction of exceptionally optimized stellarator configurations. The near-axis expansion in particular has proven to enable the construction of magnetic configurations with good confinement properties while taking only a fraction of the usual computation time to generate optimized magnetic equilibria. However, not much is known about the overall features of fast-particle orbits computed in such analytical, yet simplified, equilibria when compared to those originating from accurate equilibrium solutions. This work aims to assess and demonstrate the potential of the near-axis expansion to provide accurate information on particle orbits and to compute loss fractions in moderate to high aspect ratios. The configurations used here are all scaled to fusion-relevant parameters and approximate quasisymmetry in various degrees. This allows us to understand how deviations from quasisymmetry affect particle orbits and what are their effects on the estimation of the loss fraction. Guiding-center trajectories of fusion-born alpha particles are traced using gyronimo and SIMPLE codes under the NEAT framework, showing good numerical agreement. Discrepancies between near-axis and MHD fields have minor effects on passing particles but significant effects on trapped particles, especially in quasihelically symmetric magnetic fields. Effective expressions were found for estimating orbit widths and passing-trapped separatrix in quasisymmetric near-axis fields. Loss fractions agree in the prompt losses regime but diverge afterward.

physics.plasm-ph↗

arXiv2023

Single-Stage Stellarator Optimization: Combining Coils with Fixed Boundary Equilibria

We introduce a novel approach for the simultaneous optimization of plasma physics and coil engineering objectives using fixed-boundary equilibria that is computationally efficient and applicable to a broad range of vacuum and finite plasma pressure scenarios. Our approach treats the plasma boundary and coil shapes as independently optimized variables, penalizing the mismatch between the two using a quadratic flux term in the objective function. Four use cases are presented to demonstrate the effectiveness of the approach, including simple and complex stellarator geometries. As shown here, this method outperforms previous 2-stage approaches, achieving smaller plasma objective function values when coils are taken into account.

physics.plasm-ph↗

arXiv2023

Direct Microstability Optimization of Stellarator Devices

Turbulent transport is regarded as one of the key issues in magnetic confinement nuclear fusion, both for tokamaks in stellarators. In this work, we show that a significant decrease in a microstability-based proxy, as opposed to a geometric one, for the turbulent heat flux, namely the quasilinear heat flux, can be obtained in an efficient manner by coupling stellarator optimization with linear gyrokinetic simulations. This is accomplished by computing the quasi-linear heat flux at each step of the optimization process, as well as the deviation from quasisymmetry, and minimizing their sum, leading to a balance between neoclassical and turbulent transport proxy.

physics.plasm-ph↗

arXiv2022

A single-field-period quasi-isodynamic stellarator

A single-field-period quasi-isodynamic stellarator configuration is presented. This configuration, which resembles a twisted strip, is obtained by the method of direct construction, that is, it is found via an expansion in the distance from the magnetic axis. Its discovery, however, relied on an additional step involving numerical optimization, performed within the space of near-axis configurations defined by a set of adjustable magnetic-field parameters. This optimization, completed in 30 seconds on a single cpu core using the SIMSOPT code, yields a solution with excellent confinement, as measured by the conventional figure of merit for neoclassical transport, effective ripple, at a modest aspect ratio of eight. The optimization parameters that led to this configuration are described, its confinement properties are assessed, and a set of magnetic-field coils is found. The resulting transport at low collisionality is much smaller than that of W7-X, and the device needs significantly fewer coils thanks to the reduced number of field periods.

physics.plasm-ph↗

arXiv2021

Development of Advanced Linearized Gyrokinetic Collision Operators Using a Moment Approach

The derivation and numerical implementation of a linearized version of the gyrokinetic (GK) Coulomb collision operator (Jorge R. et al., J. Plasma Phys. 85, 905850604 (2019)) and of the widely-used linearized GK Sugama collision operator (Sugama H. et al., Phys. Plasmas 16, 112503 (2009)) is reported. An approach based on a Hermite-Laguerre moment expansion of the perturbed gyrocenter distribution function is used, referred to as gyro-moment expansion. This approach allows considering arbitrary perpendicular wavenumber and expressing the two linearized GK operators as a linear combination of gyro-moments where the expansion coefficients are given by closed analytical expressions that depend on the perpendicular wavenumber and on the temperature and mass ratios of the colliding species. The drift-kinetic (DK) limits of the GK linearized Coulomb and Sugama operators are also obtained. Comparisons between the gyro-moment approach with the GK continuum code GENE are reported focusing on the ion-temperature-gradient (ITG) instability and zonal flow (ZF) damping, finding an excellent agreement. In particular, we demonstrate that the GK linearized Sugama yields a stronger collisional damping of the ZF residual compared to the GK linearized Coulomb. Finally, we show that the numerical efficiency of the gyro-moment approach increases with collisionality, a desired property for boundary plasma applications.

physics.plasm-ph↗

arXiv2021

Ion-temperature-gradient stability near the magnetic axis of quasisymmetric stellarators

The stability of the ion-temperature gradient mode in quasisymmetric stellarators is assessed. This is performed using a set of analytical estimates together with linear gyrokinetic simulations. The peak growth rates, their corresponding real frequencies and wave-vectors are identified. A comparison is made between a first-order near-axis expansion model and eleven realistic designs obtained using numerical optimization methods. It is found that while the near-axis expansion is able to replicate the growth rates, real frequencies and perpendicular wave-vector at the inner core (both using simplified dispersion relations and first-principle gyrokinetic simulations), it leads to an overestimation of the growth rate at larger radii. An approximate analytic solution of the ITG dispersion relation for the non-resonant limit suggests growth rates could be systematically higher in quasi-axisymmetric (QA) configurations compared to quasi-helically (QH) symmetric ones. However except for very close to the axis, linear gyrokinetic simulations do not show systematic differences between QA and QH configurations.

physics.plasm-ph↗

arXiv2020

Four-dimensional drift-kinetic model for scrape-off layer plasmas

A four-dimensional plasma model able to describe the scrape-off layer region of tokamak devices at arbitrary collisionality is derived in the drift-reduced limit. The basis of the model is provided by a drift-kinetic equation that retains the full non-linear Coulomb collision operator and describes arbitrarily far from equilibrium distribution functions. By expanding the dependence of distribution function over the perpendicular velocity in a Laguerre polynomial basis and integrating over the perpendicular velocity, a set of four-dimensional moment equations for the expansion coefficients of the distribution function is obtained. The Coulomb collision operator, as well as Poisson's equation, are evaluated explicitly in terms of perpendicular velocity moments of the distribution function.

physics.plasm-ph↗

arXiv2020

The Use of Near-Axis Magnetic Fields for Stellarator Turbulence Simulations

The design of turbulence optimized stellarators has so far relied on three-dimensional equilibrium codes such as VMEC in order to find the minimum of a given objective function. In this work, we propose a complimentary approach based on the near-axis expansion to compute the geometry parameters of neoclassicaly optimized stellarators used in turbulence studies. As shown here, the near-axis expansion can be a reasonable approximation of the geometric parameters relevant for turbulence and stability simulations of the core of existing optimized stellarator designs. In particular, we examine the geometry coefficients that appear in the gyrokinetic equation, the drift-reduced fluid equations and the ideal ballooning equation. This approach may allow for the development of new stellarator optimization techniques significantly faster than conventional methods.

physics.plasm-ph↗

arXiv2020

A gyrokinetic model for the plasma periphery of tokamak devices

A gyrokinetic model is presented that can properly describe strong flows, large and small amplitude electromagnetic fluctuations occurring on scale lengths ranging from the electron Larmor radius to the equilibrium perpendicular pressure gradient scale length, and large deviations from thermal equilibrium. The formulation of the gyrokinetic model is based on a second order description of the single charged particle dynamics, derived from Lie perturbation theory, where the fast particle gyromotion is decoupled from the slow drifts, assuming that the ratio of the ion sound Larmor radius to the perpendicular equilibrium pressure scale length is small. The collective behavior of the plasma is obtained by a gyrokinetic Boltzmann equation that describes the evolution of the gyroaveraged distribution function and includes a non-linear gyrokinetic Dougherty collision operator. The gyrokinetic model is then developed into a set of coupled fluid equations referred to as the gyrokinetic moment hierarchy. To obtain this hierarchy, the gyroaveraged distribution function is expanded onto a velocity-space Hermite-Laguerre polynomial basis and the gyrokinetic equation is projected onto the same basis, obtaining the spatial and temporal evolution of the Hermite-Laguerre expansion coefficients. The Hermite-Laguerre projection is performed accurately at arbitrary perpendicular wavenumber values. Finally, the self-consistent evolution of the electromagnetic fields is described by a set of gyrokinetic Maxwell's equations derived from a variational principle, with the velocity integrals of the gyroaveraged distribution function explicitly evaluated.

physics.plasm-ph↗