arXiv subjects

R. Das

Publications and source records attributed to R. Das.

At least 19 recordsLinked to original sources

arXiv2026

Demonstrating CBM Capabilities by $\Lambda$ Baryon Reconstruction in Ni+Ni Collisions with the mCBM Experiment at SIS18 of GSI/FAIR

The Compressed Baryonic Matter (CBM) experiment at the upcoming Facility for Antiproton and Ion Research (FAIR) is a high-rate fixed-target experiment designed to investigate nuclear matter at extreme baryon densities in relativistic nucleus-nucleus collisions. To enable high-statistics measurements of rare probes, CBM is designed to operate at event rates up to 10 MHz. This necessitates the development of fast and radiation-tolerant detectors, self-triggered front-end electronics, a free-streaming data acquisition architecture, and real-time event reconstruction capabilities. Prototype versions and pre-series productions of the CBM detector systems have been deployed in the mini-CBM demonstrator setup mCBM - an experimental precursor comprising sub-components of all major CBM systems, installed at the SIS18 facility of GSI/FAIR within the FAIR Phase-0 program. In 2024, Ni+Ni collisions at a kinetic beam energy of 1.93 AGeV and an average interaction rate of about 250 kHz were successfully recorded. This dataset enables a detailed evaluation of the operational performance of the detector systems as well as the complete CBM data chain, while the reconstruction of rare $\Lambda$ baryons serves as a natural benchmark. This paper presents the first results on $\Lambda$ signal reconstruction with the mCBM experiment, demonstrating the readiness of the detector technologies and the data chain for the upcoming full-scale CBM experiment.

physics.ins-det↗

arXiv2026

Can dents and gouges compromise the structural integrity of hydrogen transport pipelines?

Repurposing natural gas pipelines for hydrogen transport requires understanding how external defects, like dents and gouges, affect structural integrity under H$_2$ exposure. To address this, we combine experiments with a new hydrogen embrittlement model aimed at large plastic straining scenarios, which integrates: (i) multi-trap hydrogen transport, (ii) finite-strain plasticity, and (iii) a hydrogen- and triaxiality-dependent damage law. Each constituent of the model is validated with experiments on X65 pipeline steel: (i) hydrogen permeation, (ii) full-scale pipe-indentation, and (iii) mechanical testing at different hydrogen and triaxiality levels. The validated model is used to study \textit{passive} (indent before H$_2$ exposure) and \textit{active} (indent with H$_2$) dents and gouges. Results reveal that hydrogen does not significantly increase the damage severity of those defects, unless hydrogen egress is completely precluded at the outer surface of a pipeline that is being pressurised internally and contains a pre-existing \textit{passive} dent with a gouge.

cs.CE↗

arXiv2025

Hadron Physics Opportunities at FAIR

This White Paper outlines a coordinated, decade-spanning programme of hadron and QCD studies anchored at the GSI/FAIR accelerator complex. Profiting from intense deuteron, proton and pion beams coupled with high-rate capable detectors and an international theory effort, the initiative addresses fundamental questions related to the strong interaction featuring confinement and dynamical mass generation. This includes our understanding of hadron-hadron interactions and the composition of hadrons through mapping the baryon and meson spectra, including exotic states, and quantifying hadron structure. This interdisciplinary research connects topics in the fields of nuclear, heavy-ion, and (nuclear) astro (particle) physics, linking, for example, terrestrial data to constraints on neutron star structure. A phased roadmap with SIS100 accelerator start-up and envisaged detector upgrades will yield precision cross sections, transition form factors, in-medium spectral functions, and validated theory inputs. Synergies with external programmes at international accelerator facilities worldwide are anticipated. The programme is expected to deliver decisive advances in our understanding of non-perturbative (strong) QCD and astrophysics, and high-rate detector and data-science technology.

hep-ex↗

arXiv2025

Backward-angle electroproduction of $\eta'$ mesons off protons at $W=2.13~\text{GeV}$ and $Q^{2}=0.46~\left(\text{GeV}/c\right)^{2}$

The electroproduction of $\eta '$ mesons from a $\mathrm{^{1}H}$ target at $W=2.13~\text{GeV}$, $Q^{2} = 0.46~\left( \text{GeV}/c\right)^{2}$ and $\cos \theta^{\text{CM}}_{\gamma^{*}\eta'} \approx -1$ has been experimentally measured. The differential cross section of virtual-photoproduction has been obtained as $4.4 \pm 0.8 ~\left( \text{stat.} \right) \pm 0.4 ~\left( \text{sys.} \right)~ \text{nb/sr}$ in the One-Photon-Exchange Approximation. This value is one-sixth of that of real-photoproduction at backward angles. A comparison with newly-developed isobar model calculations not only shows validity of the theoretical framewark employed, but also imposes new constrains on coupling strength between the $\eta'p$ final state and nucleon resonances.

nucl-ex↗

arXiv2025

Voltage-Based Unsupervised Learning Framework for Bridge Damage Detection in Simultaneous Energy Harvesting and Sensing Systems

In this study, piezoelectric energy harvesters (PEHs) are designed to offer dual functionality in structural health monitoring (SHM): harvesting electric power from bridge vibrations while serving as intrinsic damage sensors. This strategy utilises the voltage signal directly as the sensing input, eliminating the need for traditional sensing modules and thereby reducing system complexity and energy consumption. A bi-objective optimisation framework is proposed to maximise both power output and damage detection accuracy of a PEH modelled as a composite cantilevered Kirchhoff-Love plate. Voltage responses under realistic bridge inputs are predicted via isogeometric analysis. The approach is validated in two scenarios: a numerical vehicle-bridge interaction model and a laboratory-scale beam test using a toy car, each evaluated in both healthy and damaged states. Unsupervised damage detection is achieved using a convolutional variational autoencoder (CVAE) trained solely on healthy voltage signatures. The NSGA-II algorithm is applied to explore trade-offs between energy yield and sensing precision, including parametric studies on damage severity, damage location, and harvester geometry. Results indicate that optimised PEHs not only act as an effective filter and sensing component but also outperform traditional acceleration-based sensing, improving damage detection accuracy by 13% while reducing energy consumption by 98%. The multi-parameter design space further highlights the importance of bi-objective optimisation due to variations in performance even under resonant conditions. These findings demonstrate the feasibility of replacing traditional sensors with lightweight, self-powered PEHs and pave the way for sustainable simultaneous energy harvesting and sensing (SEHS) systems.

cs.CE↗

arXiv2024

Ultra-dispersive resonator readout of a quantum-dot qubit using longitudinal coupling

We perform readout of a quantum-dot hybrid qubit coupled to a superconducting resonator through a parametric, longitudinal interaction mechanism. Our experiments are performed with the qubit and resonator frequencies detuned by $\sim$10 GHz, demonstrating that longitudinal coupling can facilitate semiconductor qubit operation in the 'ultra-dispersive' regime of circuit quantum electrodynamics.

cond-mat.mes-hall↗

arXiv2024

Electroproduction of the Lambda/Sigma^0 hyperons at Q^2~0.5 (GeV/c)^2 at forward angles

In 2018, the E12-17-003 experiment was conducted at the Thomas Jefferson National Accelerator Facility (JLab) to explore the possible existence of an nnLambda state in the reconstructed missing mass distribution from a tritium gas target [K. N. Suzuki et al., Prog. Theor. Exp. Phys. 2022, 013D01 (2022), B. Pandey et al., Phys. Rev. C 105, L051001 (2022)]. As part of this investigation, data was also collected using a gaseous hydrogen target, not only for a precise absolute mass scale calibration but also for the study of Lambda/Sigma^0 electroproduction. This dataset was acquired at Q^2~0.5 (GeV/c)^2, W=2.14 GeV, and theta_{gamma K}^{c.m.}~8 deg. It covers forward angles where photoproduction data is scarce and a low-Q^2 region that is of interest for hypernuclear experiments. On the other hand, this kinematic region is at a slightly higher Q^2 than previous hypernuclear experiments, thus providing crucial information for understanding the Q^2 dependence of the differential cross sections for Lambda/Sigma^0 hyperon electroproduction. This paper reports on the Q^2 dependence of the differential cross section for the e + p -> e' + K^+ + Lambda/Sigma^0 reaction in the 0.2-0.8 (GeV/c)^2, and provides comparisons with the currently available theoretical models.

nucl-ex↗

arXiv2023

Decoherence of a tunable capacitively shunted flux qubit

Quantum annealing is a method to solve optimization problems that leverages quantum tunneling in a coupled qubit system. We present a detailed study of the coherence of a tunable capacitively-shunted flux qubit, designed for coherent quantum annealing applications. We find that for high qubit frequencies, thermal noise in the bias line makes a significant contribution to the relaxation, arising from the design choice to experimentally explore both fast annealing and high-frequency control. The measured dephasing rate is primarily due to intrinsic low-frequency flux noise in the two qubit loops, with additional contribution from the low-frequency noise of control electronics used for fast annealing. Our results characterize decoherence in a realistic setup for quantum annealing and are relevant for ongoing efforts toward building superconducting quantum annealers with increased coherence.

quant-ph↗

arXiv2022

Longitudinal coupling between a Si/SiGe quantum dot and an off-chip TiN resonator

Superconducting cavities have emerged as a key tool for measuring the spin states of quantum dots. So far however, few experiments have explored longitudinal couplings between dots and cavities, and no solid-state qubit experiments have explicitly probed the "adiabatic" regime, where the Purcell decay is strongly suppressed. Here, we report measurements of a double-quantum-dot charge qubit coupled to a high-impedance resonator via a "flip-chip" design geometry. By applying an adiabatic ac drive to the qubit through two different channels, and studying the effects of qubit energy detuning, interdot tunneling, and driving strength, we are able to unequivocally confirm the presence of a longitudinal coupling between the qubit and cavity, while the qubit remains in its ground state. Since this coupling is proportional to the driving amplitude, and is therefore switchable, it has the potential to become a powerful new tool in qubit experiments.

quant-ph↗

arXiv2022

Optimizing for periodicity: a model-independent approach to flux crosstalk calibration for superconducting circuits

Flux tunability is an important engineering resource for superconducting circuits. Large-scale quantum computers based on flux-tunable superconducting circuits face the problem of flux crosstalk, which needs to be accurately calibrated to realize high-fidelity quantum operations. Typical calibration methods either assume that circuit elements can be effectively decoupled and simple models can be applied, or require a large amount of data. Such methods become ineffective as the system size increases and circuit interactions become stronger. Here we propose a new method for calibrating flux crosstalk, which is independent of the underlying circuit model. Using the fundamental property that superconducting circuits respond periodically to external fluxes, crosstalk calibration of N flux channels can be treated as N independent optimization problems, with the objective functions being the periodicity of a measured signal depending on the compensation parameters. We demonstrate this method on a small-scale quantum annealing circuit based on superconducting flux qubits, achieving comparable accuracy with previous methods. We also show that the objective function usually has a nearly convex landscape, allowing efficient optimization.

quant-ph↗

arXiv2022

Dissipative Landau-Zener tunneling in the crossover regime from weak to strong environment coupling

Landau-Zener tunneling, which describes the transition in a two-level system during a sweep through an anti-crossing, is a model applicable to a wide range of physical phenomena. Realistic quantum systems are affected by dissipation due to coupling to their environments. An important aspect of understanding such open quantum systems is the relative energy scales of the system itself and the system-environment coupling, which distinguishes the weak- and strong-coupling regimes. Using a tunable superconducting flux qubit, we observe the crossover from weak to strong coupling to the environment in Landau-Zener tunneling. Our results confirm previous theoretical studies of dissipative Landau-Zener tunneling in the weak and strong coupling limits. We devise a spin bath model that effectively captures the crossover regime. This work is relevant for understanding the role of dissipation in quantum annealing, where the system is expected to go through a cascade of Landau-Zener transitions before reaching the target state.

quant-ph↗

arXiv2021

MnP films with desired magnetic, magnetocaloric and thermoelectric properties for a perspective magneto-thermo-electric cooling device

A perspective magneto-thermo-electric cooling device (MTECD) comprising a central magnetocaloric (MC) material (e.g., Gd) sandwiched by two thermoelectric (TE) materials (e.g., MnP) is proposed. The presence of the TE materials in the MTECD guides the heat flow direction and enhances heat pulsation. In this case, the usage of a ferromagnetic TE material that combines large TE with small MC properties within a similar temperature region can enhance the magnetic flux density and heat exchange efficiency. Here, we show that MnP nanorod-structured films with desired magnetic, MC and TE properties are very promising for use in MTECDs. The films were grown on Si substrates at 300, 400 and 500{\deg}C using molecular beam epitaxy. The 400 oC sample shows a desired TE and MC combination. A large power factor of 24.06 {\mu}W m-1 K-2 is achieved at room temperature. In this temperature region, the film exhibits a small MC effect (-deltaSM ~0.64 J/kg K and deltaTad ~0.3 K at m0H = 2 T) but ferromagnetism that gives rise to the enhanced MC effect of the central MC material. These properties could enable the MTECD to operate at high frequency.

cond-mat.mtrl-sci↗

arXiv2021

The cross-section measurement for the $^3{\textrm H}(e,e'K^+)nn\Lambda$ reaction

The small binding energy of the hypertrition leads to predictions of non-existence of bound hypernuclei for isotriplet three-body systems such as $nn\Lambda$. However, invariant mass spectroscopy at GSI has reported events that may be interpreted as the bound $nn\Lambda$ state. The $nn\Lambda$ state was sought by missing-mass spectroscopy via the $(e,e'K^+)$ reaction at Jefferson Lab's experimental Hall A. The present experiment has higher sensitivity to the $nn\Lambda$-state investigation in terms of better precision by a factor of about three. The analysis shown in this article focuses on the derivation of the reaction cross-section for the $^3{\rm{H}}(\gamma^{*},K^+)\textrm{X}$ reaction. Events that were detected in an acceptance, where a Monte Carlo simulation could reproduce the data well ($|\delta p/p| < 4\%$), were analyzed to minimize the systematic uncertainty. No significant structures were observed with the acceptance cuts, and the upper limits of the production cross-section of the $nn\Lambda$ state were obtained to be $21$ and $31~\rm{nb/sr}$ at the $90\%$ confidence level when theoretical predictions of $(-B_{\Lambda}, \Gamma) = (0.25,0.8)$ and $(0.55, 4.7)$ MeV, respectively, were assumed. The cross-section result provides valuable information for examining the existence of $nn\Lambda$.

nucl-ex↗

arXiv2021

Calibration of flux crosstalk in large-scale flux-tunable superconducting quantum circuits

Magnetic flux tunability is an essential feature in most approaches to quantum computing based on superconducting qubits. Independent control of the fluxes in multiple loops is hampered by crosstalk. Calibrating flux crosstalk becomes a challenging task when the circuit elements interact strongly. We present a novel approach to flux crosstalk calibration, which is circuit model independent and relies on an iterative process to gradually improve calibration accuracy. This method allows us to reduce errors due to the inductive coupling between loops. The calibration procedure is automated and implemented on devices consisting of tunable flux qubits and couplers with up to 27 control loops. We devise a method to characterize the calibration error, which is used to show that the errors of the measured crosstalk coefficients are all below 0.17%.

quant-ph↗

arXiv2020

Dispersive measurement of a semiconductor double quantum dot via 3D integration of a high-impedance TiN resonator

Spins in semiconductor quantum dots are a candidate for cryogenic quantum processors due to their exceptionally long coherence times. One major challenge to scaling quantum dot spin qubits is the dense wiring requirements, making it difficult to envision fabricating large arrays of nearest-neighbor-coupled qubits necessary for error correction. We describe a method to solve this problem by spacing the qubits out using high-impedance superconducting resonators with a 2D grid unit cell area of $0.16~\text{mm}^2$ using 3D integration. To prove the viability of this approach, we demonstrate 3D integration of a high-impedance TiN resonator coupled to a double quantum dot in a Si/SiGe heterostructure. Using the resonator as a dispersive gate sensor, we tune the device down to the single electron regime with an SNR = 5.36 limited by the resonator-dot capacitance. Characterization of the dot and resonator systems shows such integration can be done while maintaining low charge noise metrics for the quantum dots and with improved loaded quality factors for the superconducting resonator ($Q_L = 2.14 \times 10^4$), allowing for high-sensitivity charge detection and the potential for high fidelity 2-qubit gates. This work paves the way for 2D quantum dot qubit arrays with cavity mediated interactions.

cond-mat.mes-hall↗

arXiv2020

Robust cycloid crossover driven by anisotropy in the skyrmion host GaV$_\mathbf{4}$S$_\mathbf{8}$

We report on the anomalous magnetization dynamics of the cycloidally-modulated spin textures under the influence of uniaxial anisotropy in multiferroic $\mathrm{GaV_4S_8}$. The temperature and field dependence of the linear ac susceptibility [$χ_{1ω}^{\prime}(T,H)$], ac magnetic loss [$χ_{1ω}^{\prime\prime}(T,H)$], and nonlinear ac magnetic response [$M_{3ω}(T,H)$] are examined across the magnetic phase diagram in the frequency range $f = 10-10000$ Hz. According to recent theory, skyrmion vortices under axial crystal symmetry are confined along specific orientations, resulting in enhanced robustness against oblique magnetic fields and altered spin dynamics. We characterize the magnetic response of each spin texture and find that the dynamic rigidity of the Néel skyrmion lattice appears enhanced compared to Bloch-type skyrmions in cubic systems, even in the multidomain state. Anomalous $M_{3ω}$ and strong dissipation emerge over the same phase regime where strong variations in the cycloid pitch were observed on lowering temperature in recent small-angle neutron scattering experiments [White et al., Phys. Rev. B 97, 020401(R) (2018)]. Here, we show that strong anisotropy also drives an extended crossover of the zero-field cycloid texture in $\mathrm{GaV_4S_8}$. The frequency dependence of these dynamic signatures is consistent with that of a robust anharmonic spin texture exhibiting a correlated domain arrangement. The results underpin the essential role of magnetic anisotropy in enhancing the rigidity of topological spin textures for diverse applications.

cond-mat.mes-hall↗

arXiv2019

3D integration and packaging for solid-state qubits

Developing a packaging scheme that meets all of the requirements for operation of solid-state qubits in a cryogenic environment can be a formidable challenge. In this article, we discuss work being done in our group as well as in the broader community, focusing on the role of 3D integration and packaging in quantum processing with solid-state qubits.

quant-ph↗

arXiv2019

Galaxies in X-ray Selected Clusters and Groups in Dark Energy Survey Data II: Hierarchical Bayesian Modeling of the Red-Sequence Galaxy Luminosity Function

Using $\sim 100$ X-ray selected clusters in the Dark Energy Survey Science Verification data, we constrain the luminosity function (LF) of cluster red sequence galaxies as a function of redshift. This is the first homogeneous optical/X-ray sample large enough to constrain the evolution of the luminosity function simultaneously in redshift ($0.1<z<1.05$) and cluster mass ($13.5 \le \rm{log_{10}}(M_{200crit}) \sim< 15.0$). We pay particular attention to completeness issues and the detection limit of the galaxy sample. We then apply a hierarchical Bayesian model to fit the cluster galaxy LFs via a Schecter function, including its characteristic break ($m^*$) to a faint end power-law slope ($α$). Our method enables us to avoid known issues in similar analyses based on stacking or binning the clusters. We find weak and statistically insignificant ($\sim 1.9 σ$) evolution in the faint end slope $α$ versus redshift. We also find no dependence in $α$ or $m^*$ with the X-ray inferred cluster masses. However, the amplitude of the LF as a function of cluster mass is constrained to $\sim 20\%$ precision. As a by-product of our algorithm, we utilize the correlation between the LF and cluster mass to provide an improved estimate of the individual cluster masses as well as the scatter in true mass given the X-ray inferred masses. This technique can be applied to a larger sample of X-ray or optically selected clusters from the Dark Energy Survey, significantly improving the sensitivity of the analysis.

astro-ph.CO↗