arXiv subjects

Quanhao Zhang

Publications and source records attributed to Quanhao Zhang.

At least 19 recordsLinked to original sources

arXiv2026

The coronal mass ejection productivity of solar active region 13664/8

In May 2024, NOAA active region (AR) complex 13664/8 was one of the most productive regions of the current solar cycle, producing 12 X-class flares and over 20 coronal mass ejections (CMEs) and triggering the strongest geomagnetic storm since 2003. We investigate why this AR complex was so CME-productive. Using primarily SDO/AIA and SDO/HMI observations, we analyzed its photospheric magnetic evolution, eruption sources, eruption waiting times, and magnetic parameters in comparison with five other ARs. The region initially contained only AR 13664 and exhibited limited flare activity until AR 13668 emerged on May 4, after which clustered major flares and CMEs occurred. Rapid, complex flux emergence substantially increased the region's area, magnetic flux, complexity, and nonpotentiality. The increased complexity was manifested by at least 12 emerging bipoles and six collisional polarity inversion lines (cPILs) formed between nonconjugated polarities, all showing sustained collision and shearing and serving as eruption sources. Decay index distributions show systematically lower critical heights (<45 Mm) above CME source regions. The CME waiting time distribution exhibits two peaks, suggesting that multiple cPILs enhanced CME productivity by increasing both recurrent CMEs from the same source and disturbance-triggered CMEs from nearby sources. These results indicate that, in addition to sufficient nonpotentiality and rapid background-field decay, high magnetic complexity accompanied by dynamical collisional shearing at multiple cPILs was crucial for the extreme CME productivity of AR 13664/8.

astro-ph.SR↗

arXiv2026

Jovian Zonal Winds Revealed from Cassini/VIMS Observations

Understanding Jupiter's zonal winds is crucial to unraveling the dynamics of its atmosphere. Over the last decades, multiple data sources and techniques have been used to study zonal winds in Jupiter. Here, we develop a correlation-based method for the near-infrared data from the Cassini spacecraft to investigate zonal winds at different altitudes. The new method uses Jupiter's rotation to scan the planet as it rotates, allowing retrieval of winds from the analysis of light-curves of specific pixels over the Jovian disc. The method allows the retrieval of winds at multiple wavelengths from the Cassini/VIMS spectral data despite the low spatial resolution and the non-uniform cadence of the data. By applying this method to two VIMS data cubes acquired on 15 January 2001 at 09:42 UT and 16 January 2001 at 03:22 UT, we reveal the zonal winds at five main latitudes using information from three different wavebands, as well as the wind vertical structure at the equator, showing significant vertical wind shear in the troposphere. The vertical wind shear we derived is weaker than as reported in previous studies, highlighting the intricate interactions among multiple dynamical processes in Jupiter's atmosphere and reflecting the complexity of its atmospheric circulation. Despite the uncertainty due to the low spatial/temporal resolution and non-uniform cadence of the Cassini/VIMS-IR spectral data, the new method established in this study maximizes the value of the Cassini/VIMS in understanding Jupiter's zonal winds. Further observations are essential to explore the underlying mechanisms in Jupiter's atmosphere.

astro-ph.EP↗

arXiv2025

Solar magnetic flux rope eruptions caused by inverse flux feeding processes

Large-scale solar eruptions are generally accepted to have coronal magnetic flux ropes as their core structures. Recent studies found that the solar eruptions could be initiated by a sequence of flux feeding processes, during with chromospheric fibrils rise and merge with the pre-existing coronal flux rope. Further theoretical analyses have demonstrated that the normal flux feeding, i.e. the axial magnetic flux within the fibril is in the same direction as that in the flux rope, results in the accumulation of the total axial flux within the flux rope, so as to initiate the eruption. If the directions of the axial flux in the fibril and the flux rope are opposite, it is termed inverse flux feeding, whose influence on coronal flux ropes, however, is still unclear. In this paper, we use a 2.5-dimensional magnetohydrodynamic model to simulate the evolution of coronal flux ropes associated with inverse flux feeding. It is found that inverse flux feeding is also efficient in causing solar eruptions: although the total signed axial magnetic flux of the rope decreases after inverse flux feeding, the total unsigned axial flux can accumulate; the eruption occurs if the unsigned axial flux of the rope reaches a critical value, which is almost the same as the threshold for normal flux feeding. The total axial currents within the rope are also similar during the onset of the eruptions caused by both normal and inverse flux feeding. Our simulation results suggest that it is the unsigned axial magnetic flux rather than the signed axial flux that regulates the onset of coronal flux rope eruptions.

astro-ph.SR↗

arXiv2025

Minifilament Eruptions as the Last Straw to Break the Equilibrium of a Giant Solar Filament

Filament eruptions are magnetically driven violent explosions commonly observed on the Sun and late-type stars, sometimes leading to monster coronal mass ejections that directly affect the nearby planets' environments. More than a century of research on solar filaments suggests that the slow evolution of photospheric magnetic fields plays a decisive role in initiating filament eruptions, but the underlying mechanism remains unclear. Using high-resolution observations from the \textit{Chinese H$α$ Solar Explorer}, the \textit{Solar Upper Transition Region Imager}, and the \textit{Solar Dynamics Observatory}, we present direct evidence that a giant solar filament eruption is triggered by a series of minifilament eruptions occurring beneath it. These minifilaments, which are homologous to the giant filament but on a smaller tempo-spatial scale, sequently form and erupt due to extremely weak mutual flux disappearance of opposite-polarity photospheric magnetic fields. Through multi-fold magnetic interactions, these erupting minifilaments act as the last straw to break the force balance of the overlying giant filament and initiate its ultimate eruption. The results unveil a possible novel pathway for small-scale magnetic activities near the stellar surface to initiate spectacular filament eruptions, and provide new insight into the magnetic coupling of filament eruptions across different tempo-spatial scales.

astro-ph.SR↗

arXiv2024

Physics-informed active learning for accelerating quantum chemical simulations

Quantum chemical simulations can be greatly accelerated by constructing machine learning potentials, which is often done using active learning (AL). The usefulness of the constructed potentials is often limited by the high effort required and their insufficient robustness in the simulations. Here we introduce the end-to-end AL for constructing robust data-efficient potentials with affordable investment of time and resources and minimum human interference. Our AL protocol is based on the physics-informed sampling of training points, automatic selection of initial data, uncertainty quantification, and convergence monitoring. The versatility of this protocol is shown in our implementation of quasi-classical molecular dynamics for simulating vibrational spectra, conformer search of a key biochemical molecule, and time-resolved mechanism of the Diels-Alder reactions. These investigations took us days instead of weeks of pure quantum chemical calculations on a high-performance computing cluster. The code in MLatom and tutorials are available at https://github.com/dralgroup/mlatom.

physics.chem-ph↗

arXiv2023

MLatom 3: Platform for machine learning-enhanced computational chemistry simulations and workflows

Machine learning (ML) is increasingly becoming a common tool in computational chemistry. At the same time, the rapid development of ML methods requires a flexible software framework for designing custom workflows. MLatom 3 is a program package designed to leverage the power of ML to enhance typical computational chemistry simulations and to create complex workflows. This open-source package provides plenty of choice to the users who can run simulations with the command line options, input files, or with scripts using MLatom as a Python package, both on their computers and on the online XACS cloud computing at XACScloud.com. Computational chemists can calculate energies and thermochemical properties, optimize geometries, run molecular and quantum dynamics, and simulate (ro)vibrational, one-photon UV/vis absorption, and two-photon absorption spectra with ML, quantum mechanical, and combined models. The users can choose from an extensive library of methods containing pre-trained ML models and quantum mechanical approximations such as AIQM1 approaching coupled-cluster accuracy. The developers can build their own models using various ML algorithms. The great flexibility of MLatom is largely due to the extensive use of the interfaces to many state-of-the-art software packages and libraries.

physics.chem-ph↗

arXiv2022

Influence of magnetic reconnection on the eruptive catastrophes of coronal magnetic flux ropes

Large-scale solar eruptive activities have a close relationship with coronal magnetic flux ropes. Previous numerical studies have found that the equilibrium of a coronal flux rope system could be disrupted if the axial magnetic flux of the rope exceeds a critical value, so that the catastrophe occurs, initiating the flux rope to erupt. Further studies discovered that the catastrophe does not necessarily exist: the flux rope system with certain photospheric flux distributions could be non-catastrophic. It is noteworthy that most previous numerical studies are under the ideal magnetohydrodynamic (MHD) condition, so that it is still elusive whether there is the catastrophe associated with the critical axial flux if magnetic reconnection is included in the flux rope system. In this paper, we carried out numerical simulations to investigate the evolutions of coronal magnetic rope systems under the ideal MHD and the resistive condition. Under the ideal MHD condition, our simulation results demonstrate that the flux rope systems with either too compact or too weak photospheric magnetic source regions are non-catastrophic versus varying axial flux of the rope, and thus no eruption could be initiated; if there is magnetic reconnection in the rope system, however, those flux rope systems could change to be capable of erupting via the catastrophe associated with increasing axial flux. Therefore, magnetic reconnection could significantly influence the catastrophic behaviors of flux rope system. It should be both the magnetic topology and the local physical parameters related to magnetic reconnection that determine whether the increasing axial flux is able to cause flux rope eruptions.

astro-ph.SR↗

arXiv2022

Solar Ring Mission: Building a Panorama of the Sun and Inner-heliosphere

Solar Ring (SOR) is a proposed space science mission to monitor and study the Sun and inner heliosphere from a full 360° perspective in the ecliptic plane. It will deploy three 120°-separated spacecraft on the 1-AU orbit. The first spacecraft, S1, locates 30° upstream of the Earth, the second, S2, 90° downstream, and the third, S3, completes the configuration. This design with necessary science instruments, e.g., the Doppler-velocity and vector magnetic field imager, wide-angle coronagraph, and in-situ instruments, will allow us to establish many unprecedented capabilities: (1) provide simultaneous Doppler-velocity observations of the whole solar surface to understand the deep interior, (2) provide vector magnetograms of the whole photosphere - the inner boundary of the solar atmosphere and heliosphere, (3) provide the information of the whole lifetime evolution of solar featured structures, and (4) provide the whole view of solar transients and space weather in the inner heliosphere. With these capabilities, Solar Ring mission aims to address outstanding questions about the origin of solar cycle, the origin of solar eruptions and the origin of extreme space weather events. The successful accomplishment of the mission will construct a panorama of the Sun and inner-heliosphere, and therefore advance our understanding of the star and the space environment that holds our life.

astro-ph.SR↗

arXiv2021

Confined and eruptive catastrophes of solar magnetic flux ropes caused by mass loading and unloading

It is widely accepted that coronal magnetic flux ropes are the core structures of large-scale solar eruptive activities, which inflict dramatic impacts on the solar-terrestrial system. Previous studies have demonstrated that varying magnetic properties of a coronal flux rope system could result in a catastrophe of the rope, which may trigger solar eruptive activities. Since the total mass of a flux rope also plays an important role in stabilizing the rope, we use 2.5-dimensional magnetohydrodynamic (MHD) numerical simulations in this letter to investigate how a flux rope evolves as its total mass varies. It is found that an unloading process that decreases the total mass of the rope could result in an upward (eruptive) catastrophe in the flux rope system, during which the rope jumps upward and the magnetic energy is released. This indicates that mass unloading processes could initiate the eruption of the flux rope. Moreover, when the system is not too diffusive, there is also a downward (confined) catastrophe that could be caused by mass loading processes, via which the total mass accumulates. The magnetic energy, however, is increased during the downward catastrophe, indicating that mass loading processes could cause confined activities that may contribute to the storage of energy before the onset of coronal eruptions.

astro-ph.SR↗

arXiv2021

How flux feeding causes eruptions of solar magnetic flux ropes with the hyperbolic flux tube configuration?

Coronal magnetic flux ropes are generally considered to be the core structure of large-scale solar eruptions. Recent observations found that solar eruptions could be initiated by a sequence of "flux feeding," during which chromospheric fibrils rise upward from below, and merge with a pre-existing prominence. Further theoretical study has confirmed that the flux feeding mechanism is efficient in causing the eruption of flux ropes that are wrapped by bald patch separatrix surfaces. But it is unclear how flux feeding influences coronal flux ropes that are wrapped by hyperbolic flux tubes (HFT), and whether it is able to cause the flux-rope eruption. In this paper, we use a 2.5-dimensional magnetohydrodynamic model to simulate the flux feeding processes in HFT configurations. It is found that flux feeding injects axial magnetic flux into the flux rope, whereas the poloidal flux of the rope is reduced after flux feeding. Flux feeding is able to cause the flux rope to erupt, provided that the injected axial flux is large enough so that the critical axial flux of the rope is reached. Otherwise, the flux rope system evolves to a stable equilibrium state after flux feeding, which might be even farther away from the onset of the eruption, indicating that flux feeding could stabilize the rope system with the HFT configuration in this circumstance.

astro-ph.SR↗

arXiv2021

Population of Bright Plume Threads in Solar Polar Coronal Holes

Coronal holes are well accepted to be source regions of the fast solar wind. As one of the common structures in coronal holes, coronal plumes might contribute to the origin of the nascent solar wind. To estimate the contribution of coronal plumes to the nascent solar wind, we make the first attempt to estimate their populations in solar polar coronal holes. By comparing the observations viewed from two different angles taken by the twin satellites of STEREO and the results of Monte Carlo simulations, we estimate about 16--27 plumes rooted in an area of $4\times10^4$ arcsec$^2$ of the polar coronal holes near the solar minimum, which occupy about 2--3.4% of the area. Based on these values, the contribution of coronal plumes to the nascent solar wind has also been discussed. A further investigation indicates that more precise number of coronal plumes can be worked out with observations from three or more viewing angles.

astro-ph.SR↗

arXiv2021

Three-dimensional Reconstruction of Coronal Mass Ejections by CORAR Technique through Different Stereoscopic Angle of STEREO Twin Spacecraft

Recently, we developed the Correlation-Aided Reconstruction (CORAR) method to reconstruct solar wind inhomogeneous structures, or transients, using dual-view white-light images (Li et al. 2020; Li et al. 2018). This method is proved to be useful for studying the morphological and dynamical properties of transients like blobs and coronal mass ejection (CME), but the accuracy of reconstruction may be affected by the separation angle between the two spacecraft (Lyu et al. 2020). Based on the dual-view CME events from the Heliospheric Imager CME Join Catalogue (HIJoinCAT) in the HELCATS (Heliospheric Cataloguing, Analysis and Techniques Service) project, we study the quality of the CME reconstruction by the CORAR method under different STEREO stereoscopic angles. We find that when the separation angle of spacecraft is around 150°, most CME events can be well reconstructed. If the collinear effect is considered, the optimal separation angle should locate between 120° and 150°. Compared with the CME direction given in the Heliospheric Imager Geometrical Catalogue (HIGeoCAT) from HELCATS, the CME parameters obtained by the CORAR method are reasonable. However, the CORAR-obtained directions have deviations towards the meridian plane in longitude, and towards the equatorial plane in latitude. An empirical formula is proposed to correct these deviations. This study provides the basis for the spacecraft configuration of our recently proposed Solar Ring mission concept (Wang et al. 2020b).

astro-ph.SR↗

arXiv2020

Cause and Kinematics of a Jet-Like CME

In this article, we present the multi-viewpoint and multi-wavelength analysis of an atypical solar jet based on the data from Solar Dynamics Observatory, SOlar, and Heliospheric Observatory, and Solar TErrestrial RElations Observatory. It is usually believed that the coronal mass ejections (CMEs) are developed from the large scale solar eruptions in the lower atmosphere. However, the kinematical and spatial evolution of the jet on 2013 April 28 guide us that the jet was clearly associated with a narrow CME having a width of approx 25 degrees with a speed of 450 km/s. To better understand the link between the jet and the CME, we did the coronal potential field extrapolation from the line of sight magnetogram of the AR. The extrapolations present that the jet eruption follows exactly the same path of the open magnetic field lines from the source region which provides the route for the jet material to escape from the solar surface towards the outer corona.

astro-ph.SR↗

arXiv2020

Eruption of Solar Magnetic Flux Ropes Caused by Flux Feeding

Large-scale solar eruptions are believed to have a magnetic flux rope as the core structure. However, it remains elusive as to how the flux rope builds up and what triggers its eruption. Recent observations found that a prominence erupted following multiple episodes of "flux feeding". During each episode, a chromospheric fibril rose and merged with the prominence lying above. In this letter, we carried out 2.5-dimensional magnetohydrodynamic (MHD) numerical simulations to investigate whether the flux-feeding mechanism can explain such an eruption. The simulations demonstrate that the discrete emergence of small flux ropes can initiate eruptions by feeding axial flux into the preexistent flux rope until its total axial flux reaches a critical value. The onset of the eruption is dominated by an ideal MHD process. Our simulation results corroborate that the flux feeding is a viable mechanism to cause the eruption of solar magnetic flux ropes.

astro-ph.SR↗

arXiv2020

Reconstructing solar wind inhomogeneous structures from stereoscopic observations in white-light: Solar wind transients in 3D

White-light images from Heliospheric Imager-1 (HI1) onboard the Solar Terrestrial Relations Observatory (STEREO) provide 2-dimensional (2D) global views of solar wind transients traveling in the inner heliosphere from two perspectives. How to retrieve the hidden three-dimensional (3D) features of the transients from these 2D images is intriguing but challenging. In our previous work (Li et al., 2018), a 'correlation-aided' method is developed to recognize the solar wind transients propagating along the Sun-Earth line based on simultaneous HI1 images from two STEREO spacecraft. Here the method is extended from the Sun-Earth line to the whole 3D space to reconstruct the solar wind transients in the common field of view of STEREO HI1 cameras. We demonstrate the capability of the method by showing the 3D shapes and propagation directions of a coronal mass ejection (CME) and three small-scale blobs during 3-4 April 2010. Comparing with some forward modeling methods, we found our method reliable in terms of the position, angular width and propagation direction. Based on our 3D reconstruction result, an angular distorted, nearly North-South oriented CME on 3 April 2010 is revealed, manifesting the complexity of a CME's 3D structure.

astro-ph.SR↗

arXiv2020

Concept of the Solar Ring Mission: Overview

The concept of the Solar Ring mission was gradually formed from L5/L4 mission concept, and the proposal of its pre-phase study was funded by the National Natural Science Foundation of China in November 2018 and then by the Strategic Priority Program of Chinese Academy of Sciences in space sciences in May 2019. Solar Ring mission will be the first attempt to routinely monitor and study the Sun and inner heliosphere from a full 360-degree perspective in the ecliptic plane. The current preliminary design of the Solar Ring mission is to deploy six spacecraft, grouped in three pairs, on a sub-AU orbit around the Sun. The two spacecraft in each group are separated by about 30 degrees and every two groups by about 120 degrees. This configuration with necessary science payloads will allow us to establish three unprecedented capabilities: (1) determine the photospheric vector magnetic field with unambiguity, (2) provide 360-degree maps of the Sun and the inner heliosphere routinely, and (3) resolve the solar wind structures at multiple scales and multiple longitudes. With these capabilities, the Solar Ring mission aims to address the origin of solar cycle, the origin of solar eruptions, the origin of solar wind structures and the origin of severe space weather events. The successful accomplishment of the mission will advance our understanding of the star and the space environment that hold our life and enhance our capability of expanding the next new territory of human.

astro-ph.SR↗

arXiv2018

Unraveling the Links among Sympathetic Eruptions

Solar eruptions occurring at different places within a relatively short time interval are considered to be sympathetic. However, it is difficult to determine whether there exists a cause and effect between them. Here we study a failed and a successful filament eruption following an X1.8-class flare on 2014 December 20, in which slipping-like magnetic reconnections serve as a key causal link among the eruptions. Reconnection signatures and effects are: at both sides of the filament experiencing the failed eruption, serpentine ribbons extend along chromospheric network to move away from the filament, while a hot loop apparently grows above it; at the filament undergoing the successful eruption, overlying cold loops contract, while coronal dimming appears at both sides even before the filament eruption. These effects are understood by reconnections continually transforming magnetic fluxes overlying one filament to the other, which adjusts how the magnetic field decays with increasing height above the filaments in opposite trends, therefore either strengthening or weakening the magnetic confinement of each filament.

astro-ph.SR↗

arXiv2018

Reconstructing solar wind inhomogeneous structures from stereoscopic observations in white-light: Small transients along the Sun-Earth line

The Heliospheric Imagers (HI) on board the two spacecraft of the Solar Terrestrial Relations Observatory (STEREO) provided white-light images of transients in the solar wind from dual perspectives from 2007 to 2014. In this paper, we develop a new method to identify and locate the transients automatically from simultaneous images from the two inner telescopes, known as HI-1, based on a correlation analysis. Correlation coefficient (cc) maps along the Sun-Earth line are constructed for the period from 1 Jan 2010 to 28 Feb 2011. From the maps, transients propagating along the Sun-Earth line are identified, and a 27-day periodic pattern is revealed, especially for small-scale transients. Such a periodicity in the transient pattern is consistent with the rotation of the Sun's global magnetic structure and the periodic crossing of the streamer structures and slow solar wind across the Sun-Earth line, and this substantiates the reliability of our method and the high degree of association between the small-scale transients of the slow solar wind and the coronal streamers. Besides, it is suggested by the cc map that small-scale transients along the Sun-Earth line are more frequent than large-scale transients by a factor of at least 2, and that they quickly diffused into background solar wind within about 40 Rs in terms of the signal-to-noise ratio of white-light emissions. The method provides a new tool to reconstruct inhomogeneous structures in the heliosphere from multiple perspectives.

astro-ph.SR↗