arXiv subjects

Qi Wang

Publications and source records attributed to Qi Wang.

At least 487 records · Page 27Linked to original sources

arXiv2022

Waveform Design for Joint Sensing and Communications in Millimeter-Wave and Low Terahertz Bands

The convergence of sensing and communication in the millimeter-wave (mmWave) and low terahertz (THz) bands has been envisioned as a promising technology, since it incorporates high-rate data transmission of hundreds of Gbps and mm-level radar sensing in a spectrum- and cost-efficient manner, by sharing both the frequency and hardware resources. However, the joint radar sensing and communication (JRC) system faces considerable challenges in the mmWave and low-THz scale, due to the peculiarities of the propagation channel and radio-frequency (RF) front ends. To this end, the waveform design for the JRC systems in mmWave and low-THz bands with ultra-broad bandwidth is investigated in this paper. Firstly, by considering the JRC design based on the co-existence concept, where both functions operate in a time-domain duplex (TDD) manner, a novel multi-subband quasi-perfect (MS-QP) sequence, composed of multiple perfect subsequences on different subbands, is proposed for target sensing, which achieves accurate target ranging and velocity estimation, whilst only requiring cost-efficient low-rate analog-to-digital converters (A/Ds) for sequence detection. Furthermore, the root index of each perfect subsequence is designed to eliminate the influence of strong Doppler shift on radar sensing. Finally, a data-embedded MS-QP (DE-MS-QP) waveform is constructed through time-domain extension of the MS-QP sequence, generating null frequency points on each subband for data transmission. Unlike the co-existence-based JRC system in TDD manner, the proposed DE-MS-QP waveform enables simultaneous interference-free sensing and communication, whilst inheriting all the merits from MS-QP sequences. Numerical results validate the superiority of the proposed waveforms regarding the communication and sensing performances, hardware cost as well as flexibility of the resource allocation between the dual functions.

eess.SP↗

arXiv2022

Window Normalization: Enhancing Point Cloud Understanding by Unifying Inconsistent Point Densities

Downsampling and feature extraction are essential procedures for 3D point cloud understanding. Existing methods are limited by the inconsistent point densities of different parts in the point cloud. In this work, we analyze the limitation of the downsampling stage and propose the pre-abstraction group-wise window-normalization module. In particular, the window-normalization method is leveraged to unify the point densities in different parts. Furthermore, the group-wise strategy is proposed to obtain multi-type features, including texture and spatial information. We also propose the pre-abstraction module to balance local and global features. Extensive experiments show that our module performs better on several tasks. In segmentation tasks on S3DIS (Area 5), the proposed module performs better on small object recognition, and the results have more precise boundaries than others. The recognition of the sofa and the column is improved from 69.2% to 84.4% and from 42.7% to 48.7%, respectively. The benchmarks are improved from 71.7%/77.6%/91.9% (mIoU/mAcc/OA) to 72.2%/78.2%/91.4%. The accuracies of 6-fold cross-validation on S3DIS are 77.6%/85.8%/91.7%. It outperforms the best model PointNeXt-XL (74.9%/83.0%/90.3%) by 2.7% on mIoU and achieves state-of-the-art performance. The code and models are available at https://github.com/DBDXSS/Window-Normalization.git.

cs.CV↗

arXiv2022

Counting Like Human: Anthropoid Crowd Counting on Modeling the Similarity of Objects

The mainstream crowd counting methods regress density map and integrate it to obtain counting results. Since the density representation to one head accords to its adjacent distribution, it embeds the same category objects with variant values, while human beings counting models the invariant features namely similarity to objects. Inspired by this, we propose a rational and anthropoid crowd counting framework. To begin with, we leverage counting scalar as supervision signal, which provides global and implicit guidance to similar matters. Then, the large kernel CNN is utilized to imitate the paradigm of human beings which models invariant knowledge firstly and slides to compare similarity. Later, re-parameterization on pre-trained paralleled parameters is presented to cater to the inner-class variance on similarity comparison. Finally, the Random Scaling patches Yield (RSY) is proposed to facilitate similarity modeling on long distance dependencies. Extensive experiments on five challenging benchmarks in crowd counting show the proposed framework achieves state-of-the-art.

cs.CV↗

arXiv2022

Growing Instance Mask on Leaf

Contour-based instance segmentation methods include one-stage and multi-stage schemes. These approaches achieve remarkable performance. However, they have to define plenty of points to segment precise masks, which leads to high complexity. We follow this issue and present a single-shot method, called \textbf{VeinMask}, for achieving competitive performance in low design complexity. Concretely, we observe that the leaf locates coarse margins via major veins and grows minor veins to refine twisty parts, which makes it possible to cover any objects accurately. Meanwhile, major and minor veins share the same growth mode, which avoids modeling them separately and ensures model simplicity. Considering the superiorities above, we propose VeinMask to formulate the instance segmentation problem as the simulation of the vein growth process and to predict the major and minor veins in polar coordinates. Besides, centroidness is introduced for instance segmentation tasks to help suppress low-quality instances. Furthermore, a surroundings cross-correlation sensitive (SCCS) module is designed to enhance the feature expression by utilizing the surroundings of each pixel. Additionally, a Residual IoU (R-IoU) loss is formulated to supervise the regression tasks of major and minor veins effectively. Experiments demonstrate that VeinMask performs much better than other contour-based methods in low design complexity. Particularly, our method outperforms existing one-stage contour-based methods on the COCO dataset with almost half the design complexity.

cs.CV↗

arXiv2022

Correlation driven near-flat band Stoner excitations in a Kagome magnet

Among condensed matter systems, Mott insulators exhibit diverse properties that emerge from electronic correlations. In itinerant metals, correlations are usually weak, but can also be enhanced via geometrical confinement of electrons, that manifest as `flat' dispersionless electronic bands. In the fast developing field of topological materials, which includes Dirac and Weyl semimetals, flat bands are one of the important components that can result in unusual magnetic and transport behaviour. To date, characterisation of flat bands and their magnetism is scarce, hindering the design of novel materials. Here, we investigate the ferromagnetic Kagomé semimetal Co$_3$Sn$_2$S$_2$ using resonant inelastic X-ray scattering. Remarkably, nearly non-dispersive Stoner spin excitation peaks are observed, sharply contrasting with the featureless Stoner continuum expected in conventional ferromagnetic metals. Our band structure and dynamic spin susceptibility calculations, and thermal evolution of the excitations, confirm the nearly non-dispersive Stoner excitations as unique signatures of correlations and spin-polarized electronic flat bands in Co$_3$Sn$_2$S$_2$. These observations serve as a cornerstone for further exploration of band-induced symmetry-breaking orders in topological materials.

cond-mat.str-el↗

arXiv2022

Adjoint-based Particle Forcing Reconstruction and Uncertainty Quantification

The forcing of particles in turbulent environments influences dynamical properties pertinent to many fundamental applications involving particle-flow interactions. Current study explores the determination of forcing for one-way coupled passive particles, under the assumption that the ambient velocity fields are known. When measurements regarding particle locations are available but sparse, direct evaluation of the forcing is intractable. Nevertheless, the forcing for finite-size particles can be determined using adjoint-based data assimilation. This inverse problem is formulated with the framework of optimization, where the cost function is defined as the difference between the measured and predicted particle locations. The gradient of the cost function, with respect to the forcing can be calculated from the adjoint dynamics. When measurements are subject to Gaussian noise, samples within the probability distribution of the forcing can be drawn using Hamiltonian Monte Carlo. The algorithm is tested in the Arnold-Beltrami-Childress flow as well as the homogeneous isotropic turbulence. Results demonstrate that the forcing can only be determined accurately for particle Reynolds number between 1 and 5, where the majority of Reynolds number history along the particle trajectory falls in.

physics.flu-dyn↗

arXiv2022

Pressure-induced superconductivity in PdTeI with quasi-one-dimensional PdTe chains

The quasi-one-dimensional material PdTeI exhibits unusual electronic transport properties at ambient pressure. Here, we systematically investigate both the structural and electronic responses of PdTeI to external pressure, through a combination of electrical transport, synchrotron x-ray diffraction (XRD), and Raman spectroscopy measurements. The charge density wave (CDW) order in PdTeI is fragile and the transition temperature TCDW decreases rapidly with the application of external pressure. The resistivity hump is indiscernible when the pressure is increased to 1 GPa. Upon further compression, zero resistance is established above 20 GPa, suggesting the occurrence of superconductivity. Combined XRD and Raman data evidence that the emergence of superconductivity is accompanied by a pressure-induced amorphization of PdTeI.

cond-mat.supr-con↗

arXiv2022

Pressured-induced superconductivity extending across the topological phase transition in thallium-based topological materials TlBi(S1-xSex)2

The coexistence of superconductivity and topology holds the potential to realize exotic quantum states of matter. Here we report that superconductivity induced by high pressure in three thallium-based materials, covering the phase transition from a normal insulator (TlBiS2) to a topological insulator (TlBiSe2) through a Dirac semimetal (TlBiSeS). By increasing the pressure up to 60 GPa, we observe superconductivity phase diagrams with maximal Tc values at 6.0-8.1 K. Our density-functional theory calculations reveal topological surface states in superconductivity phases for all three compounds. Our study paves the path to explore topological superconductivity and topological phase transitions.

cond-mat.supr-con↗

arXiv2022

Pressure-Tuning Superconductivity in Noncentrosymmetric Topological Materials ZrRuAs

Recently, the hexagonal phase of ternary transition metal pnictides TT'X (T = Zr, Hf; T'= Ru; X = P, As), which are well-known noncentrosymmetric superconductors, were predicted to host nontrivial bulk topology. In this work, we systematically investigate the electronic responses of ZrRuAs to external pressure. At ambient pressure, ZrRuAs show superconductivity with Tc ~ 7.74 K, while a large upper critical field ~ 13.03 T is obtained for ZrRuAs, which is comparable to the weak-coupling Pauli limit. The resistivity of ZrRuAs exhibits a non-monotonic evolution with increasing pressure. The superconducting transition temperature Tc increases with applied pressure and reaches a maximum value of 7.93 K at 2.1 GPa, followed by a decrease. The nontrivial topology is robust and persists up to the high-pressure regime. Considering both robust superconductivity and intriguing topology in this material, our results could contribute to studies of the interplay between topological electronic states and superconductivity.

cond-mat.supr-con↗

arXiv2022

Thermodynamically consistent dynamic boundary conditions of phase field models

We present a general, constructive method to derive thermodynamically consistent models and consistent dynamic boundary conditions hierarchically following the generalized Onsager principle. The method consists of two steps in tandem: the dynamical equation is determined by the generalized Onsager principle in the bulk firstly, and then the surface chemical potential and the thermodynamically consistent boundary conditions are formulated subsequently by applying the generalized Onsager principle at the boundary. The application strategy of the generalized Onsager principle in two-step yields thermodynamically consistent models together with the consistent boundary conditions that warrant a non-negative entropy production rate (or equivalently non-positive energy dissipation rate in isothermal cases) in the bulk as well as at the boundary. We illustrate the method using phase field models of binary materials elaborate on two sets of thermodynamically consistent dynamic boundary conditions. These two types of boundary conditions differ in how the across boundary mass flux participates in boundary surface dynamics. We then show that many existing thermodynamically consistent, binary phase field models together with their dynamic or static boundary conditions are derivable from this method. As an illustration, we show numerically how dynamic boundary conditions affect crystal growth in the bulk using a binary phase field model.

cond-mat.stat-mech↗

arXiv2022

Power Efficient Video Super-Resolution on Mobile NPUs with Deep Learning, Mobile AI & AIM 2022 challenge: Report

Video super-resolution is one of the most popular tasks on mobile devices, being widely used for an automatic improvement of low-bitrate and low-resolution video streams. While numerous solutions have been proposed for this problem, they are usually quite computationally demanding, demonstrating low FPS rates and power efficiency on mobile devices. In this Mobile AI challenge, we address this problem and propose the participants to design an end-to-end real-time video super-resolution solution for mobile NPUs optimized for low energy consumption. The participants were provided with the REDS training dataset containing video sequences for a 4X video upscaling task. The runtime and power efficiency of all models was evaluated on the powerful MediaTek Dimensity 9000 platform with a dedicated AI processing unit capable of accelerating floating-point and quantized neural networks. All proposed solutions are fully compatible with the above NPU, demonstrating an up to 500 FPS rate and 0.2 [Watt / 30 FPS] power consumption. A detailed description of all models developed in the challenge is provided in this paper.

eess.IV↗

arXiv2022

Nonreciprocal Charge Transport in Topological Kagome Superconductor CsV$_{3}$Sb$_{5}$

Nonreciprocal charge transport phenomena are widely studied in two-dimensional superconductors, which demonstrate unidirectional-anisotropy magnetoresistances as a result of symmetry breaking. Here, we report a strong nonreciprocal transport phenomenon in superconducting CsV$_{3}$Sb$_{5}$ thin flakes. The second harmonic voltages, mainly originating from the rectification effect of vortex motion, are unambiguously developed with in-plane and out-of-plane magnetic fields, and their magnitudes are comparable to those in noncentrosymmetric superconductors. The second harmonic magnetoresistances split into several peaks and some of them reverse their signs by ramping the magnetic field or the current within the superconducting transition. The nonreciprocity suggests a strong asymmetry in CsV$_{3}$Sb$_{5}$. The centrosymmetric structure and symmetric electronic phases in CsV$_{3}$Sb$_{5}$ can hardly induce the distinct nonreciprocal transport phenomenon, which could be correlated to a symmetry breaking from an unconventional superconducting order parameter symmetry.

cond-mat.supr-con↗

arXiv2022

Learning Independent Instance Maps for Crowd Localization

Accurately locating each head's position in the crowd scenes is a crucial task in the field of crowd analysis. However, traditional density-based methods only predict coarse prediction, and segmentation/detection-based methods cannot handle extremely dense scenes and large-range scale-variations crowds. To this end, we propose an end-to-end and straightforward framework for crowd localization, named Independent Instance Map segmentation (IIM). Different from density maps and boxes regression, each instance in IIM is non-overlapped. By segmenting crowds into independent connected components, the positions and the crowd counts (the centers and the number of components, respectively) are obtained. Furthermore, to improve the segmentation quality for different density regions, we present a differentiable Binarization Module (BM) to output structured instance maps. BM brings two advantages into localization models: 1) adaptively learn a threshold map for different images to detect each instance more accurately; 2) directly train the model using loss on binary predictions and labels. Extensive experiments verify the proposed method is effective and outperforms the-state-of-the-art methods on the five popular crowd datasets. Significantly, IIM improves F1-measure by 10.4% on the NWPU-Crowd Localization task. The source code and pre-trained models will be released at https://github.com/taohan10200/IIM.

cs.CV↗

arXiv2022

Generation of Spin-Wave Pulses by Inverse Design

The development of fast magnonic information processing nanodevices requires operating with short spin-wave pulses, but, the shorter the pulses, the more affected they are by information loss due to broadening and dispersion. The capability of engineering spin-wave pulses and controlling their propagation could solve this problem. Here, we provide a method to generate linear spin-wave pulses with a desired spatial-temporal profile in magnonic waveguides based on inverse design. As relevant examples, we theoretically predict that both rectangular and self-compressing spin-wave pulses can be generated in state-of-the-art waveguides with fidelities >96% using narrow stripline antennas. The method requires minimal computational overhead and is universal, i.e., it applies to arbitrary targeted pulse shapes, type of waves (exchange or dipolar), waveguide materials, and waveguide geometries. It can also be extended to more complex magnonic structures. Our results could lead to the utilization of large-scale magnonic circuits for classical and quantum information processing.

cond-mat.mes-hall↗

arXiv2022

Skipping the boundary layer: high-speed droplet-based immunoassay using Rayleigh acoustic streaming

Acoustic mixing of droplets is a promising way to implement biosensors that combine high speed and minimal reagent consumption. To date, this type of droplet mixing is driven by a volume force resulting from the absorption of high-frequency acoustic waves in the bulk of the fluid. Here, we show that the speed of these sensors is limited by the slow advection of analyte to the sensor surface due to the formation of a hydrodynamic boundary layer. We eliminate this hydrodynamic boundary layer by using much lower ultrasonic frequencies to excite the droplet, which drives a Rayleigh streaming that behaves essentially like a slip velocity. Three-dimensional simulations show that this provides a threefold speedup compared to Eckart streaming. Experimentally, we shorten a SARS-CoV-2 antibody immunoassay from 20 min to 40 s.

physics.flu-dyn↗

arXiv2022

Efficient Probabilistic Computing with Stochastic Perovskite Nickelates

Probabilistic computing has emerged as a viable approach to solve hard optimization problems. Devices with inherent stochasticity can greatly simplify their implementation in electronic hardware. Here, we demonstrate intrinsic stochastic resistance switching controlled via electric fields in perovskite nickelates doped with hydrogen. The ability of hydrogen ions to reside in various metastable configurations in the lattice leads to a distribution of transport gaps. With experimentally characterized p-bits, a shared-synapse p-bit architecture demonstrates highly-parallelized and energy-efficient solutions to optimization problems such as integer factorization and Boolean-satisfiability. The results introduce perovskite nickelates as scalable potential candidates for probabilistic computing and showcase the potential of light-element dopants in next-generation correlated semiconductors.

cond-mat.mtrl-sci↗

arXiv2022

Machine Learning Interatomic Potential for Anisotropic Thermal Transport in Bulk Hexagonal Boron Nitride

The highly anisotropic thermal conductivity in layered materials is crucial for a broad range of applications such as thermal management of electronic devices, thermal insulation, and thermoelectrics. Understanding of anisotropic thermal transport in layered materials largely depends on atomistic simulations based on density functional theory (DFT) or empirical potentials, which however suffer either low computational efficiency or accuracy. Recently, machine learning interatomic potentials (MLIPs) are emerging as a powerful tool to bridge the gap. Despite the recent progress in developing MLIPs, little attention has been paid to constructing a potential that can accurately predict the thermal properties of layered materials, which is more challenging compared with the case of isotropic materials because of the highly anisotropic bonding and weak van der Waals interactions in layered materials. Here, we introduce a MLIP within the Gaussian approximation potential (GAP) framework for bulk hexagonal boron nitride (h-BN) with a typical layered structure. The GAP can well predict the highly anisotropic phonon transport properties and thermal conductivity of bulk h-BN with DFT-level accuracy at orders of magnitude reduced cost. Our work demonstrates the ability of GAP to reproduce the subtle features of anisotropic potential energy surfaces of bulk h-BN and potentially other layered materials. Atomistic simulations based on MLIPs are expected to be able to greatly promote the understanding of phonon transport and the prediction of thermophysical properties in layered materials.

cond-mat.mtrl-sci↗

arXiv2022

MAFNet: A Multi-Attention Fusion Network for RGB-T Crowd Counting

RGB-Thermal (RGB-T) crowd counting is a challenging task, which uses thermal images as complementary information to RGB images to deal with the decreased performance of unimodal RGB-based methods in scenes with low-illumination or similar backgrounds. Most existing methods propose well-designed structures for cross-modal fusion in RGB-T crowd counting. However, these methods have difficulty in encoding cross-modal contextual semantic information in RGB-T image pairs. Considering the aforementioned problem, we propose a two-stream RGB-T crowd counting network called Multi-Attention Fusion Network (MAFNet), which aims to fully capture long-range contextual information from the RGB and thermal modalities based on the attention mechanism. Specifically, in the encoder part, a Multi-Attention Fusion (MAF) module is embedded into different stages of the two modality-specific branches for cross-modal fusion at the global level. In addition, a Multi-modal Multi-scale Aggregation (MMA) regression head is introduced to make full use of the multi-scale and contextual information across modalities to generate high-quality crowd density maps. Extensive experiments on two popular datasets show that the proposed MAFNet is effective for RGB-T crowd counting and achieves the state-of-the-art performance.

cs.CV↗