arXiv subjects

Prashil S. Joshi

Publications and source records attributed to Prashil S. Joshi.

4 recordsLinked to original sources

arXiv2026

Physics-guided inverse design of Co-based superalloys using machine learning and multi-objective optimization for enhanced $γ'$ solvus temperature

The discovery of next-generation Co-based superalloys with improved high-temperature stability is hindered by the vast compositional design space and complex interactions among alloying elements governing gamma-prime phase stability. This study presents a physics-informed machine learning framework for the inverse design of Co-based superalloys with higher gamma-prime solvus temperature while accounting for alloy density. Four descriptors representing atomic size mismatch (delta-MV), mixing enthalpy (Delta-Hm), electronegativity mismatch (delta-EN), and valence electron concentration mismatch (delta-VEC) were used to characterize the chemistry governing phase stability. Regression algorithms were evaluated using leave-one-out cross-validation, with Gaussian Process Regression (GPR) achieving the best performance (R2 = 0.932, RMSE = 34.7 deg C, and MAE = 25.9 deg C). The probabilistic nature of GPR enabled uncertainty-aware Bayesian optimization for exploring the uncharted composition space. Non-dominated Sorting Genetic Algorithm II (NSGA-II) and Genetic Algorithms were used to simultaneously increase gamma-prime solvus temperature and reduce alloy density. The optimization generated numerous previously unexplored Co-based alloy compositions, with predicted gamma-prime solvus temperatures of 1248-1353 deg C, including candidates approaching or exceeding the maximum value in the experimental dataset. Descriptor analysis identified atomic size mismatch and mixing enthalpy as key factors governing gamma-prime stability, while principal component analysis confirmed that the proposed alloys occupy chemically relevant descriptor regions. This physics-informed inverse design framework provides an efficient route for identifying high-performance Co-based superalloys and can be adapted to other advanced structural alloys.

cond-mat.mtrl-sci↗

arXiv2026

Physics-Informed Residual Deep Learning for Constitutive Modeling of Hot Deformation and Dynamic Recrystallization in a Mo-Rich $α+β$ Titanium Alloy

Accurate constitutive modeling of hot deformation behavior is essential for designing thermomechanical processes in advanced structural alloys. Conventional Arrhenius-type and empirical models do not adequately capture the combined effects of strain hardening, dynamic recovery (DRV), and dynamic recrystallization (DRX) across broad processing conditions. In this study, two Stacked Residual Physics-Informed Neural Networks (STAR-PINNs) were developed to simulate the hot deformation response of a Mo-rich $α+β$ titanium alloy (Ti-6Al-4Mo-1V-0.1Si). The Enhanced STAR-PINN incorporated thermomechanical constitutive constraints, while the DRX-Aware STAR-PINN employed a dual-output architecture to account for recrystallization kinetics. Both models used a shared residual encoder trained on experimental flow stress data collected at temperatures from 800 to 1050 degrees C and strain rates between 0.01 and 10 per second. Physics-informed constraints, including thermal softening, strain-rate sensitivity, strain hardening, and post-peak softening, were enforced through automatic differentiation. The DRX-Aware model further integrated JMAK-Avrami regularization, DRX saturation constraints, and Arrhenius-based consistency with tunable parameters, directly linking the predicted DRX fraction to stress output via latent-feature fusion. The DRX-Aware STAR-PINN achieved RMSE = 11.62 MPa, MAE = 4.73 MPa, R^2 = 0.9852, and a cross-validated RMSE of 12.74 +/- 0.38 MPa. The learned JMAK parameters converged to k = 2.03 and n = 1.99, remaining close to the conventional values while being inferred directly from the data. The model effectively mirrored flow curves influenced by temperature, DRX development, and Zener Hollomon correlations under interpolation scenarios while preserving physically coherent constitutive behavior.

cond-mat.mtrl-sci↗

arXiv2026

From Local Atomic Motifs to Thermodynamic State: An Interpretable Physics-Informed Framework for Cu-Zr Metallic Glasses

Machine-learning models that relate local atomic structure to the thermodynamic state of metallic glasses typically assess physical consistency after training rather than enforcing it during learning. Here, we develop a multi-task physics-informed neural network (PINN) that predicts temperature directly from Voronoi-motif population histograms while incorporating autograd-derived gradient constraints representing physically motivated relationships between structural motifs, quench rate, and temperature. The model simultaneously classifies each configuration as liquid, supercooled/transition, or glass through an auxiliary classification head. The classification task achieves 96.6% test accuracy with a macro-F1 score of 0.95, while the regression head yields a mean absolute error of 23.4 K on a trajectory-disjoint held-out test set. Five-fold trajectory-grouped cross-validation, deep-ensemble predictions, and Monte Carlo dropout are used to assess model robustness and predictive uncertainty. Sensitivity analyses demonstrate that physics constraints can be incorporated over a broad range of loss weights without compromising predictive accuracy, while substantially improving compliance with the prescribed physical trends. Benchmarking against conventional machine-learning regressors further demonstrates competitive predictive performance. SHAP analysis across the cross-validation ensemble identifies the coupled near-icosahedral motif family, particularly the full icosahedral motif and its single-atom-perturbed counterpart, as the dominant structural fingerprints of the glassy state. These results demonstrate that physically motivated constraints can be embedded directly into motif-based structure-property models, providing a pathway from post-hoc interpretability toward physically constrained machine learning for metallic glasses.

cond-mat.mtrl-sci↗

arXiv2026

Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study

Plastic deformation during strain-rate-controlled spherical nanoindentation is governed by the coupled evolution of constitutive strain-rate sensitivity and deformation length scale, making the intrinsic influence of strain rate difficult to isolate experimentally. This coupling is investigated in unirradiated and neutron-irradiated single-crystal tungsten using spherical nanoindentation, atomic force microscopy, high-resolution electron backscatter diffraction (HR-EBSD), and crystal plasticity finite element (CPFE) modeling. Nanoindentation experiments were performed at strain rates from 3.2e-5 to 3.2e-3 per second. AFM and HR-EBSD quantified surface pile-up, residual lattice strain, and geometrically necessary dislocation (GND) distributions. A strain-gradient CPFE framework incorporating thermally activated slip, GND hardening, irradiation-induced obstacle hardening, and strain-dependent softening was calibrated using a single experimental condition and validated across all remaining strain rates without further parameter adjustment. The validated model was then used to independently vary strain rate and indentation depth. Simulations show that strain rate primarily controls the stress required for thermally activated plastic flow, whereas indentation depth governs plastic-zone evolution, pile-up, and GND accumulation. Irradiation increases obstacle strength and promotes deformation localization while remaining consistent with a common thermally activated mechanism. The framework also predicts the compression response of a polycrystalline cube, demonstrating transferability across loading conditions and length scales, providing a robust basis for constitutive modeling of irradiation-hardened materials under transient loading.

cond-mat.mtrl-sci↗