arXiv subjects

Pradipto

Publications and source records attributed to Pradipto.

6 recordsLinked to original sources

arXiv2025

Granular focused jet

We investigated the formation of granular focused jets defined as narrow upward ejections of grains triggered by impulsive forces and shaped by kinematic focusing on a concave free surface. The jets were generated from nonfluidized granular beds, in contrast to existing granular Worthington jets that originate from fluidized layers. To elucidate the jet dynamics, we performed experiments in which a test tube partially filled with dry glass beads was dropped onto a flat rigid floor, systematically varying the granular pile height$L_{\rm G}$, drop height $H$, and particle size. The resulting jet formation in granular media was driven by the same kinematic focusing mechanism responsible for jetting in liquids. By conducting parallel experiments using low-viscosity silicone oil under identical conditions, we directly compared the granular and liquid jets. At low pile heights, the granular jet velocity quantitatively agreed with the liquid jet velocity. However, at high pile heights, contrasting trends emerged. Specifically, the granular jet velocity decreased with increasing $L_{\rm G}$, while the liquid jet velocity increased due to cavitation. Discrete element method simulations confirmed that the velocity reduction in granular jets arose from energy dissipation via grain--grain contacts during impact force propagation. These findings highlight common mechanisms and distinctive dissipation behaviors in granular and liquid focused jets.

cond-mat.soft↗

arXiv2023

Correlation between morphological evolution of splashing drop and exerted impact force revealed by interpretation of explainable artificial intelligence

This study reveals a possible correlation between splashing morphology and the normalized impact force exerted by an impacting drop on a solid surface. This finding is obtained from a newly proposed feature extraction method and a subsequent interpretation of the classification of splashing and non-splashing drops performed by an explainable artificial intelligence (XAI) video classifier. Notably, the values of the weight matrix elements of the XAI that correspond to the extracted features are found to change with the temporal evolution of the drop morphology. We compute the rate of change of the contributions of each frame with respect to the classification value of a video as an important index to quantify the contributions of the extracted splashing and non-splashing features at different impact times to the classification of the XAI model. Remarkably, the rate computed for the extracted splashing features is found to closely match the profile of the normalized impact force, where the splashing features are most pronounced immediately after the normalized impact force reaches its peak value. This study has provided an example that clarifies the relationship between the complex morphological evolution of a splashing drop and physical parameters by interpreting the classification of an XAI video classifier.

physics.flu-dyn↗

arXiv2022

Effective viscosity and elasticity in dense suspensions under impact: Toward a modeling of walking on suspensions

The elastic response of dense suspensions under an impact is studied using coupled Lattice Boltzmann Method and Discrete Element Method (LBM-DEM) and its reduced model. We succeed to extract the elastic force acting on the impactor in dense suspensions, which can exist even in the absence of percolating clusters of suspended particles. We then propose a reduced model to describe the motion of the impactor and demonstrate its relevancy through the comparison of the solution of the reduced model and that of LBM-DEM. Furthermore, we illustrate that the perturbation analysis of the reduced model captures the short-time behavior of the impactor motion quantitatively. We apply this reduced model to the impact of the foot-spring-body system on a dense suspension, which is the minimal model to realize walking on the suspension. Due to the spring force of the system and the stiffness of the suspension, the foot undergoes multiple bounces. We also study the parameter dependencies of the hopping motion and find that multiple bounces are suppressed as the spring stiffness increases.

cond-mat.soft↗

arXiv2021

Viscoelastic response of impact process on dense suspensions

We numerically study impact processes on dense suspensions using the lattice Boltzmann method to elucidate the connection between the elastic rebound of an impactor and relations among the impact speed $u_0$, maximum force acting on the impactor $F_{\rm max}$, and elapsed time $t_{\rm max}$ to reach $F_{\rm max}$. We find that $t_{\rm max}$ emerges in the early stage of the impact, while the rebound process takes place in the late stage. We find a crossover of $F_{\rm max}$ from $u_0$ independent regime for low $u_0$ to a power law regime satisfying $F_{\rm max}\propto u_0^\alpha$ with $\alpha\approx 1.5$ for high $u_0$. Similarly, $t_{\rm max}$ satisfies $t_{\rm max}\propto u_0^{\beta}$ with $\beta\approx -0.5$ for high $u_0$. Both power-law relations for $F_{\rm max}$ and $t_{\rm max}$ versus $u_0$ for high $u_0$ are independent of the system size, but the rebound phenomenon strongly depends on the depth of the container for suspensions. Thus, we indicate that the rebound phenomenon is not directly related to the relations among $u_0$, $F_{\rm max}$ and $t_{\rm max}$. We propose a floating + force chain model, where the rebound process is caused by an elastic term that is proportional to the number of the connected force chains from the impactor to the bottom plate. On the other hand, there are no elastic contributions in the relations for $F_{\rm max}$ and $t_{\rm max}$ against $u_0$ because of the absence of percolated force chains in the early stage. This phenomenology predicts $F_{\rm max}\propto u_0^{3/2}$ and $t_{\rm max}\propto u_0^{-1/2}$ for high $u_0$ and also recovers the behavior of the impactor quantitatively even if there is the rebound process.

cond-mat.soft↗

arXiv2020

Impact-induced hardening in dense frictional suspensions

We numerically study the impact-induced hardening in dense suspensions. We employ the lattice Boltzmann method and perform simulations of dense suspensions under impacts, which incorporate the contact between suspended particles with the free surface of the suspension. Our simulation for a free-falling impactor on a dense suspension reproduces experimental results, where rebound takes place for frictional particles at high-speed impact and high volume fraction shortly after the impact before subsequently sinking. We found that the shear stress of the suspension is not affected by the impact, which clearly distinguishes the impact-induced hardening from the discontinuous shear thickening. Instead, we found the existence of a localized region with distinctively high value of normal stress corresponding to the dynamically jammed region. Our simulation indicates that the frictional interaction between suspended particles is important for the impact-induced hardening to maintain the dynamically jammed region. Furthermore, persistent homology analysis successfully elucidates the topological structure of force chains.

cond-mat.soft↗

arXiv2019

Simulation of dense non-Brownian suspensions with the lattice Boltzmann method: Shear jammed and fragile states

Dense non-Brownian suspensions including both the hydrodynamic interactions and the frictional contacts between particles are numerically studied under simple and oscillatory shears in terms of the lattice Boltzmann method. We successfully reproduce the discontinuous shear thickening (DST) under a simple shear for bulk three-dimensional systems. For our simulation of an oscillatory shear in a quasi-two-dimensional system, we measure the mechanical response when we reduce the strain amplitude after the initial oscillations with a larger strain amplitude. Here, we find the existence of the shear-jammed state under this protocol in which the storage modulus $G^{\prime}$ is only finite for high initial strain amplitude $\gamma_0^{I}$. We also find the existence of the fragile state in which both fluid-like and solid-like responses can be detected for an identical area fraction and an initial strain amplitude $\gamma_0^{I}$ depending on the initial phase $\Theta$ (or the asymmetricity of the applied strain) of the oscillatory shear. We also observe the DST-like behavior under the oscillatory shear in the fragile state. Moreover, we find that the stress anisotropy becomes large in the fragile state. Finally, we confirm that the stress formula based on the angular distribution of the contact force recovers the contact contributions to the stress tensors for both simple and oscillatory shears with large strains.

cond-mat.soft↗