arXiv subjects

Pingping Chen

Publications and source records attributed to Pingping Chen.

At least 19 recordsLinked to original sources

arXiv2026

Final assessment of radioactive impurities in the JUNO detector

The Jiangmen Underground Neutrino Observatory (JUNO) collaboration has completed the construction of the 20,000-ton liquid scintillator detector and the associated muon veto detector system. To meet the physics objectives, the materials used in the detector must exhibit low radioactive contamination. The single-event rate in the fiducial volume (R $<$ 17.2 m) of the scintillator is required to be approximately 7 Hz for energies above 0.7 MeV, resulting in an accidental coincidence background of about 1 event per day for reactor neutrino physics analyses. Since the beginning of the construction phase, we have screened the natural radioactivity content of thousands of materials, to select those that meet the design background budget. The radioactive impurity concentrations of the materials ultimately used in the JUNO detector are summarized in this paper. The construction of the entire detector and the subsequent filling of the liquid scintillator were completed in August 2025. From the initial data, the total count rate of natural radioactivity within the detector's fiducial volume has met the requirements and is sufficient to support the reactor antineutrino analysis.

physics.ins-det↗

arXiv2026

A Low-energy Threshold and Multi-messenger Trigger System for the JUNO Experiment

The Jiangmen Underground Neutrino Observatory (JUNO) is a 20-kiloton liquid scintillator neutrino detector, located 650 meters (1800 m.w.e.) underground in Jiangmen, Guangdong, China. JUNO is primarily designed for reactor neutrino measurements and has been taking data since 2025. With the largest mass of its kind and an excellent energy resolution, JUNO is a leading observatory for high-precision measurements of MeV neutrinos. The standard global trigger system serves as the primary trigger for JUNO. We present a newly developed multi-messenger trigger system that extends the capabilities of the global trigger by providing a lower energy threshold and an independent monitoring capability. During the 2025 operation, it achieved an effective energy threshold of approximately 110 +/- 10 keV, providing a lower threshold configuration suitable for low-energy event analysis. The system shows the potential to further reduce the threshold to well below 100 keV. Based on the multi-messenger trigger system, an astrophysical monitor has been developed to receive and process external alerts from other messengers, such as gravitational-wave observations. A Transient Neutrino Burst Monitor is integrated to detect short-time-scale neutrino burst events and enables real-time monitoring of transient astrophysical phenomena. The system is sensitive to neutrino bursts from core-collapse supernovae within a distance of about 250 kpc.

hep-ex↗

arXiv2026

Towards a monolithic platform for coupling superconducting circuits to low-loss microwave phonons in AlScN on 4H-SiC

Hybrid superconducting-phonon quantum processing is promising for cavity QED, measurement-based quantum computing, and other quantum applications. Relative to microwave photons at the same frequency, phonons can provide ultra-compact footprints, extremely low losses, and greater connectivity. Phonons can also couple strongly to superconducting circuits through the piezoelectric effect. However, this promise rests on scalable platforms that achieve these benefits without degrading superconducting circuit performance. This motivates a monolithic platform combining low phononic loss, strong electromechanical coupling, and superconducting-circuit compatibility without requiring suspended phononics. Here, we characterize a monolithic quantum acoustic platform combining aluminum superconducting circuits on exposed silicon carbide (SiC) with piezoelectric aluminum scandium nitride (AlScN) on SiC for integrated phononics. This architecture is enabled by selective removal of AlScN from selected chip regions, allowing aluminum superconducting microwave resonators to be fabricated directly on the SiC while preserving adjacent AlScN-on-SiC regions for phonon transduction. The resulting Al-on-SiC resonators exhibit a coherent lifetime of 2.9 {\mu}s, demonstrating compatibility with aluminum superconducting quantum devices. In parallel, cryogenic surface acoustic delay-line measurements on the retained AlScN-on-SiC regions show low phononic propagation loss at 4.05 GHz, corresponding to an estimated phonon lifetime of 7.6 {\mu}s. Together with a previously demonstrated electromechanical coupling coefficient of about 4.3% and a theoretical upper bound of 8%, these results establish Al-on-SiC/AlScN-on-SiC as a promising monolithic platform for integrating superconducting microwave circuits with piezoelectric phononic components for quantum acoustic networking and hybrid quantum systems.

quant-ph↗

arXiv2026

Low-Complexity Successive-Cancellation List Decoding of $2\times2$ Kernel Non-Binary Polar Codes

Non-binary successive cancellation list (NB-SCL) decoding expands each surviving path into $q$ candidate branches at every information symbol, which causes high path expansion, sorting, and pruning complexity. To address this issue, this paper proposes low-complexity list decoding algorithms for $2\times2$ kernel non-binary polar codes (NBPCs). First, we design a split-reduced non-binary successive cancellation list (SR-NBSCL) decoder that skips path splitting when the current symbol is sufficiently reliable. We then exploit the final Rate-1 node structure and switch the last group of information symbols to simplified non-binary successive cancellation (NB-SC) decoding, resulting in the enhanced split-reduced non-binary successive cancellation list (ESR-NBSCL) decoder. To further reduce branch expansion at unreliable symbols, we introduce an accumulated reliability-deviation (ARD) metric and propose an adaptive branch-pruning non-binary successive cancellation list (ABP-NBSCL) decoder, which prunes unreliable candidate branches before sorting and then reduces the dominant sorting complexity. Simulation results show that the proposed decoders achieve frame-error-rate (FER) performance close to that of conventional NB-SCL decoding with much lower complexity. In particular, the ABP-NBSCL decoder reduces the path splitting number (PSN) by more than $80\%$ at several tested signal-to-noise ratios (SNRs), with a negligible performance loss.

cs.IT↗

arXiv2026

Embedded underwater front-end electronics for the 3-inch photomultipliers in the JUNO experiment

The Jiangmen Underground Neutrino Observatory (JUNO) is a 20-kton liquid scintillator-based, low-radioactivity, multi-purpose neutrino detector located 693 meters (1800 m.w.e.) underground in the Guangdong province, China. To detect scintillation light produced in the target, the detector is equipped with 17,612 20-inch photomultipliers (PMTs), forming the Large PMT system (LPMT). In addition, 25,600 3-inch photomultipliers (the Small Photomultiplier System or SPMT) are deployed in the gaps between the LPMTs. This paper presents the design and performance of the underwater front-end electronics developed for the SPMT system. It details the individual electronics boards and their key components, the inter-board interfaces, the system-level design, and the firmware architecture that supports data acquisition and control. It also outlines mechanical and thermal integration, board validation procedures, and system performance metrics. The readout chain includes digitization of 128 PMT channels per unit, synchronized time-stamping, charge measurement, event packaging, and bandwidth management. Comprehensive validation confirms the system's readiness to meet JUNO's stringent physics goals. The underwater electronics achieve noise levels as low as 0.04 photoelectrons with minimal crosstalk (below 0.4%) and a bandwidth of 57 MB/s, ensuring reliable single photo-electron detection and operation under high-rate conditions. The SPMT system has now been fully integrated and installed in JUNO. Its commissioning and physics performance will be reported in a future publication.

physics.ins-det↗

arXiv2026

Exploiting Adaptive Channel Pruning for Communication-Efficient Split Learning

Split learning (SL) transfers most of the training workload to the server, which alleviates computational burden on client devices. However, the transmission of intermediate feature representations, referred to as smashed data, incurs significant communication overhead, particularly when a large number of client devices are involved. To address this challenge, we propose an adaptive channel pruning-aided SL (ACP-SL) scheme. In ACP-SL, a label-aware channel importance scoring (LCIS) module is designed to generate channel importance scores, distinguishing important channels from less important ones. Based on these scores, an adaptive channel pruning (ACP) module is developed to prune less important channels, thereby compressing the corresponding smashed data and reducing the communication overhead. Experimental results show that ACP-SL consistently outperforms benchmark schemes in test accuracy. Furthermore, it reaches a target test accuracy in fewer training rounds, thereby reducing communication overhead.

cs.LG↗

arXiv2025

Prospects for geoneutrino detection with JUNO

Geoneutrinos, which are antineutrinos emitted during the decay of long-lived radioactive elements inside Earth, serve as a unique tool for studying the composition and heat budget of our planet. The Jiangmen Underground Neutrino Observatory (JUNO) experiment in China, which has recently completed construction, is expected to collect a sample comparable in size to the entire existing world geoneutrino dataset in less than a year. This paper presents an updated estimation of sensitivity to geoneutrinos of JUNO using the best knowledge available to date about the experimental site, the surrounding nuclear reactors, the detector response uncertainties, and the constraints expected from the TAO satellite detector. To facilitate comparison with present and future geological models, our results cover a wide range of predicted signal strengths. Despite the significant background from reactor antineutrinos, the experiment will measure the total geoneutrino flux with a precision comparable to that of existing experiments within its first few years, ultimately achieving a world-leading precision of about 8% over ten years. The large statistics of JUNO will also allow separation of the Uranium-238 and Thorium-232 contributions with unprecedented precision, providing crucial constraints on models of formation and composition of Earth. Observation of the mantle signal above the lithospheric flux will be possible but challenging. For models with the highest predicted mantle concentrations of heat-producing elements, a 3-sigma detection over six years requires knowledge of the lithospheric flux to within 15%. Together with complementary measurements from other locations, the geoneutrino results of JUNO will offer cutting-edge, high-precision insights into the interior of Earth, of fundamental importance to both the geoscience and neutrino physics communities.

hep-ex↗

arXiv2025

Design, waterproofing, and mass production of the 3-inch PMT frontend system of JUNO

Over 25,600 3-inch photomultiplier tubes (PMTs) have been instrumented for the central detector of the Jiangmen Underground Neutrino Observatory. Each PMT is equipped with a high-voltage divider and a frontend cable with waterproof sealing. Groups of sixteen PMTs are connected to the underwater frontend readout electronics via specialized multi-channel waterproof connectors. This paper outlines the design and mass production processes for the high-voltage divider, the cable and connector, as well as the waterproof potting of the PMT bases. The results of the acceptance tests of all the integrated PMTs are also presented.

physics.ins-det↗

arXiv2025

Geometrical Tailoring of Shockley-Ramo Bipolar Photocurrent in Self-powered GaAs Nanodevices

Bipolar photoresponse - where photocurrent polarity reverses with excitation wavelength, gate voltage, or other conditions - is essential for optical logic, neuromorphic computing, and imaging. Unlike unipolar responses, bipolar behavior enables direct binary encoding and enhanced photodetection contrast. However, in conventional photoconductive or photovoltaic systems, the simultaneous and opposite-directional transport of electrons and holes often suppresses polarity switching. Recent self-powered Shockley-Ramo (SR) photoresponse in gapless materials also show only unipolar signals due to strong, irreversible electron-hole asymmetry. Here, we demonstrate for the first-time bipolar SR photoresponse in GaAs nanoconstriction devices by exploiting reversible electron-hole asymmetry. The longer carrier lifetimes in GaAs enable sub-diffusion-length control of carrier dynamics through geometry. By tuning photocarrier dynamics near the nanoconstriction for both majority electrons and minority holes, we modulate the SR response to exhibit dual polarities. At low excitation, photoelectrons dominate; as excitation increases, intervalley scattering populates higher-energy L-valleys, reducing electron contribution and leading to polarity reversal driven by the growing dominance of photoexcited holes. These results, supported by SR theory, show that nanoscale geometric engineering, together with the reversible electron-hole asymmetry, enables self-powered bipolar photocurrent responses, offering new routes toward advanced optoelectronic devices.

physics.optics↗

arXiv2025

A Novel Spreading-Factor-Index-Aided LoRa Scheme: Design and Performance Analysis

LoRa is a widely recognized modulation technology in the field of low power wide area networks (LPWANs). However, the data rate of LoRa is too low to satisfy the requirements of Internet of Things applications. To address this issue, we propose a novel high-data-rate LoRa scheme based on the spreading factor index (SFI). In the proposed SFI-LoRa scheme, the starting frequency bin of a chirp signal is used to transmit information bits, while the combinations of spreading factors are exploited as a set of indices to convey additional information bits. Moreover, the theoretical symbol error rate, data rate, transmission throughput, complexity and energy efficiency of the proposed SFI-LoRa scheme are carefully analyzed. Simulation results not only verify the accuracy of our theoretical analysis, but also demonstrate that the proposed SFI-LoRa scheme can improve the transmission throughput of existing LoRa schemes without sacrificing the BER performance over additive white Gaussian noise, Rayleigh fading, and multipath flat-fading channels. Therefore, the proposed SFI-LoRa scheme is a potential solution for applications requiring a high data rate in the LPWAN domain.

eess.SP↗

arXiv2025

Simulation of the Background from $^{13}$C$(\alpha, n)^{16}$O Reaction in the JUNO Scintillator

Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($\alpha, n$) reactions. In organic liquid scintillator detectors, $\alpha$ particles emitted from intrinsic contaminants such as $^{238}$U, $^{232}$Th, and $^{210}$Pb/$^{210}$Po, can be captured on $^{13}$C nuclei, followed by the emission of a MeV-scale neutron. Three distinct interaction mechanisms can produce prompt energy depositions preceding the delayed neutron capture, leading to a pair of events correlated in space and time within the detector. Thus, ($\alpha, n$) reactions represent an indistinguishable background in liquid scintillator-based antineutrino detectors, where their expected rate and energy spectrum are typically evaluated via Monte Carlo simulations. This work presents results from the open-source SaG4n software, used to calculate the expected energy depositions from the neutron and any associated de-excitation products. Also simulated is a detailed detector response to these interactions, using a dedicated Geant4-based simulation software from the JUNO experiment. An expected measurable $^{13}$C$(\alpha, n)^{16}$O event rate and reconstructed prompt energy spectrum with associated uncertainties, are presented in the context of JUNO, however, the methods and results are applicable and relevant to other organic liquid scintillator neutrino detectors.

physics.ins-det↗

arXiv2024

JUNO Sensitivity to Invisible Decay Modes of Neutrons

We explore the decay of bound neutrons into invisible particles (e.g., $n\rightarrow 3 \nu$ or $nn \rightarrow 2 \nu$) in the JUNO liquid scintillator detector, which do not produce an observable signal. The invisible decay includes two decay modes: $ n \rightarrow { inv} $ and $ nn \rightarrow { inv} $. The invisible decays of $s$-shell neutrons in $^{12}{\rm C}$ will leave a highly excited residual nucleus. Subsequently, some de-excitation modes of the excited residual nuclei can produce a time- and space-correlated triple coincidence signal in the JUNO detector. Based on a full Monte Carlo simulation informed with the latest available data, we estimate all backgrounds, including inverse beta decay events of the reactor antineutrino $\bar{\nu}_e$, natural radioactivity, cosmogenic isotopes and neutral current interactions of atmospheric neutrinos. Pulse shape discrimination and multivariate analysis techniques are employed to further suppress backgrounds. With two years of exposure, JUNO is expected to give an order of magnitude improvement compared to the current best limits. After 10 years of data taking, the JUNO expected sensitivities at a 90% confidence level are $\tau/B( n \rightarrow { inv} ) > 5.0 \times 10^{31} \, {\rm yr}$ and $\tau/B( nn \rightarrow { inv} ) > 1.4 \times 10^{32} \, {\rm yr}$.

hep-ex↗

arXiv2024

Potential to identify neutrino mass ordering with reactor antineutrinos at JUNO

The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose neutrino experiment under construction in South China. This paper presents an updated estimate of JUNO's sensitivity to neutrino mass ordering using the reactor antineutrinos emitted from eight nuclear reactor cores in the Taishan and Yangjiang nuclear power plants. This measurement is planned by studying the fine interference pattern caused by quasi-vacuum oscillations in the oscillated antineutrino spectrum at a baseline of 52.5~km and is completely independent of the CP violating phase and neutrino mixing angle $\theta_{23}$. The sensitivity is obtained through a joint analysis of JUNO and Taishan Antineutrino Observatory (TAO) detectors utilizing the best available knowledge to date about the location and overburden of the JUNO experimental site, local and global nuclear reactors, JUNO and TAO detector responses, expected event rates and spectra of signals and backgrounds, and systematic uncertainties of analysis inputs. We find that a 3$\sigma$ median sensitivity to reject the wrong mass ordering hypothesis can be reached with an exposure to approximately 6.5 years $\times$ 26.6 GW thermal power.

hep-ex↗

arXiv2024

Prediction of Energy Resolution in the JUNO Experiment

This paper presents an energy resolution study of the JUNO experiment, incorporating the latest knowledge acquired during the detector construction phase. The determination of neutrino mass ordering in JUNO requires an exceptional energy resolution better than 3\% at 1~MeV. To achieve this ambitious goal, significant efforts have been undertaken in the design and production of the key components of the JUNO detector. Various factors affecting the detection of inverse beta decay signals have an impact on the energy resolution, extending beyond the statistical fluctuations of the detected number of photons, such as the properties of the liquid scintillator, performance of photomultiplier tubes, and the energy reconstruction algorithm. To account for these effects, a full JUNO simulation and reconstruction approach is employed. This enables the modeling of all relevant effects and the evaluation of associated inputs to accurately estimate the energy resolution. The results of study reveal an energy resolution of 2.95\% at 1~MeV. Furthermore, this study assesses the contribution of major effects to the overall energy resolution budget. This analysis serves as a reference for interpreting future measurements of energy resolution during JUNO data collection. Moreover, it provides a guideline for comprehending the energy resolution characteristics of liquid scintillator-based detectors.

hep-ex↗

arXiv2024

A Hierarchically Feature Reconstructed Autoencoder for Unsupervised Anomaly Detection

Anomaly detection and localization without any manual annotations and prior knowledge is a challenging task under the setting of unsupervised learning. The existing works achieve excellent performance in the anomaly detection, but with complex networks or cumbersome pipelines. To address this issue, this paper explores a simple but effective architecture in the anomaly detection. It consists of a well pre-trained encoder to extract hierarchical feature representations and a decoder to reconstruct these intermediate features from the encoder. In particular, it does not require any data augmentations and anomalous images for training. The anomalies can be detected when the decoder fails to reconstruct features well, and then errors of hierarchical feature reconstruction are aggregated into an anomaly map to achieve anomaly localization. The difference comparison between those features of encoder and decode lead to more accurate and robust localization results than the comparison in single feature or pixel-by-pixel comparison in the conventional works. Experiment results show that the proposed method outperforms the state-of-the-art methods on MNIST, Fashion-MNIST, CIFAR-10, and MVTec Anomaly Detection datasets on both anomaly detection and localization.

cs.CV↗

arXiv2024

HAAP: Vision-context Hierarchical Attention Autoregressive with Adaptive Permutation for Scene Text Recognition

Scene Text Recognition (STR) is challenging in extracting effective character representations from visual data when text is unreadable. Permutation language modeling (PLM) is introduced to refine character predictions by jointly capturing contextual and visual information. However, in PLM, the use of random permutations causes training fit oscillation, and the iterative refinement (IR) operation also introduces additional overhead. To address these issues, this paper proposes the Hierarchical Attention autoregressive Model with Adaptive Permutation (HAAP) to enhance position-context-image interaction capability, improving autoregressive LM generalization. First, we propose Implicit Permutation Neurons (IPN) to generate adaptive attention masks that dynamically exploit token dependencies, enhancing the correlation between visual information and context. Adaptive correlation representation helps the model avoid training fit oscillation. Second, the Cross-modal Hierarchical Attention mechanism (CHA) is introduced to capture the dependencies among position queries, contextual semantics and visual information. CHA enables position tokens to aggregate global semantic information, avoiding the need for IR. Extensive experimental results show that the proposed HAAP achieves state-of-the-art (SOTA) performance in terms of accuracy, complexity, and latency on several datasets.

cs.CV↗

arXiv2023

Real-time Monitoring for the Next Core-Collapse Supernova in JUNO

The core-collapse supernova (CCSN) is considered one of the most energetic astrophysical events in the universe. The early and prompt detection of neutrinos before (pre-SN) and during the supernova (SN) burst presents a unique opportunity for multi-messenger observations of CCSN events. In this study, we describe the monitoring concept and present the sensitivity of the system to pre-SN and SN neutrinos at the Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton liquid scintillator detector currently under construction in South China. The real-time monitoring system is designed to ensure both prompt alert speed and comprehensive coverage of progenitor stars. It incorporates prompt monitors on the electronic board as well as online monitors at the data acquisition stage. Assuming a false alert rate of 1 per year, this monitoring system exhibits sensitivity to pre-SN neutrinos up to a distance of approximately 1.6 (0.9) kiloparsecs and SN neutrinos up to about 370 (360) kiloparsecs for a progenitor mass of 30 solar masses, considering both normal and inverted mass ordering scenarios. The pointing ability of the CCSN is evaluated by analyzing the accumulated event anisotropy of inverse beta decay interactions from pre-SN or SN neutrinos. This, along with the early alert, can play a crucial role in facilitating follow-up multi-messenger observations of the next galactic or nearby extragalactic CCSN.

hep-ex↗

arXiv2023

Design of a New CIM-DCSK-Based Ambient Backscatter Communication System

To improve the data rate in differential chaos shift keying (DCSK) based ambient backscatter communication (AmBC) system, we propose a new AmBC system based on code index modulation (CIM), referred to as CIM-DCSK-AmBC system. In the proposed system, the CIM-DCSK signal transmitted in the direct link is used as the radio frequency source of the backscatter link. The signal format in the backscatter link is designed to increase the data rate as well as eliminate the interference of the direct link signal. As such, the direct link signal and the backscatter link signal can be received and demodulated simultaneously. Moreover, we derive and validate the theoretical bit error rate (BER) expressions of the CIM-DCSK-AmBC system over multipath Rayleigh fading channels. Regarding the short reference DCSK-based AmBC (SR-DCSK-AmBC) system as a benchmark system, numerical results reveal that the CIM-DCSK-AmBC system can achieve better BER performance in the direct link and higher throughput in the backscatter link than the benchmark system.

cs.IT↗