Pingan Hu | arXiv Science

arXiv2015

Gate Tuning of High-Performance InSe-Based Photodetectors Using Graphene Electrodes

In order to increase the response speed of the InSe-based photodetector with high photoresponsivity, graphene is used as the transparent electrodes to modify the difference of the work function between the electrodes and the InSe. As expected, the response speed of InSe/graphene photodetectors is down to 120 μs, which is about 40 times faster than that of our InSe/metal device. And it can also be tuned by the back-gate voltage from 310 μs down to 100 μs. With high response speed, the photoresponsivity can reach as high as 60 AW-1 simultaneously. Meanwhile the InSe/graphene photodetectors possess a broad spectral range at 400-1000 nm. The design of 2D crystal/graphene electrical contacts could be important for high performance optoelectronic devices.

physics.optics↗

arXiv2014

Strong enhancement of photoresponsivity with shrinking the electrodes spacing in few layer GaSe photodetectors

A critical challenge for the integration of the optoelectronics is that photodetectors have relatively poor sensitivities at the nanometer scale. It is generally believed that a large electrodes spacing in photodetectors is required to absorb sufficient light to maintain high photoresponsivity and reduce the dark current. However, this will limit the optoelectronic integration density. Through spatially resolved photocurrent investigation, we find that the photocurrent in metal-semiconductor-metal (MSM) photodetectors based on layered GaSe is mainly generated from the photoexcited carriers close to the metal-GaSe interface and the photocurrent active region is always close to the Schottky barrier with higher electrical potential. The photoresponsivity monotonically increases with shrinking the spacing distance before the direct tunneling happen, which was significantly enhanced up to 5,000 AW-1 for the bottom contacted device at bias voltage 8 V and wavelength of 410 nm. It is more than 1,700-fold improvement over the previously reported results. Besides the systematically experimental investigation of the dependence of the photoresponsivity on the spacing distance for both the bottom and top contacted MSM photodetectors, a theoretical model has also been developed to well explain the photoresponsivity for these two types of device configurations. Our findings realize shrinking the spacing distance and improving the performance of 2D semiconductor based MSM photodetectors simultaneously, which could pave the way for future high density integration of 2D semiconductor optoelectronics with high performances.

cond-mat.mes-hall↗