arXiv subjects
Publications and source records attributed to Pierre Berest.
The "no-tensile effective stress" criterion is discussed. It is proven that effective tensile stresses can be generated at a cavern wall after a rapid increase or decrease in pressure. The Etzel K-102 test, performed in Germany more than 20 years ago, is revisited using the notion of effective tensile stresses.
Storage of natural gas in salt caverns had been developed mainly for seasonal storage, resulting in a small number of yearly pressure cycles and moderate gas-production rates. The needs of energy traders are changing towards more aggressive operational modes. The "high-frequency cycling" operation of salt caverns raises questions concerning the effects of frequently repeated and intense mechanical and thermal loading. These questions concern the constitutive creep laws for salt, laboratory test procedures, criteria to be used at the design stage to provide operability, and the long-term integrity of the underground salt caverns.
Water hammers commonly are observed at wellheads and often are considered a potential hazard that should be avoided. Nevertheless, there are a few situations in which water hammers provide very valuable information about a well. A comprehensive data-acquisition and analysis system has been developed by Brouard Consulting and Ecole Polytechnique. One potential application of that system is determining the depth of an interface between two fluids. This application has been tested successfully at the Manosque field. It is demonstrated here how this low-cost and non-intrusive system can be accurate and allows practical, real-time measurements.
Rapid gas depressurization leads to gas cooling that is followed by slow gas warming when the cavern is kept idle. The decrease in the temperature of gas depends upon the relative withdrawal rate (in %/day), and cavern size and shape. Gas cooling may result in the onset of tensile stresses at cavern walls and roofs that may generate fractures or cracks. However, in most cases, the depth of penetration of these fractures is small, and they are perpendicular to the cavern wall. The distance between two parallel fractures becomes larger when fractures penetrate deeper into the rock mass, as some fractures stop growing. Fractures form a polygonal pattern. Salt slabs are created, with boundaries formed by the opened fractures. As long as the depth of penetration of the fracture remains small, these slabs remain strongly bonded to the rock mass, and it is believed that, in many cases, their weights are not large enough to allow them to break off the cavern wall.