arXiv subjects

Pier Marzocca

Publications and source records attributed to Pier Marzocca.

9 recordsLinked to original sources

arXiv2026

Geometry Parameterisation via a Structural Modal Basis for Aerodynamic Shape Optimisation

Aircraft outer mould lines are often heavily constrained early by payload requirements, manufacturability limits, and low-observability considerations. The remaining aerodynamic design space is typically small, highly constrained, and difficult to represent using a concise and physically meaningful set of design variables. A structural modal parameterisation method (MPM) is introduced for such problems. The method constructs a tunable pseudo-structure and solves its eigenvalue problem to obtain a modal basis, from which a selected subset of modes parameterises the geometry. Boundary conditions, stiffness distribution, density, thickness, and added masses are treated as intentional basis-design variables that shape the admissible deformation space prior to optimisation. The resulting design coordinates are independent of any specific flow solver, making the approach broadly applicable. For tightly constrained aerodynamic shape optimisation problems, it provides a practical balance of parameter conciseness, robust constraint awareness, and geometric flexibility.

math.NA↗

arXiv2026

Neural Differential Equations for Oscillatory Flows in Aeroelasticity Applied to Transonic Buffet

Self-excited aerodynamic flows arise across a broad range of systems and can drive nonlinear fluid-structure interactions and aeroelastic instabilities that are challenging and computationally expensive to predict. This paper presents a physics-guided neural differential equation (DE) reduced order model (ROM) combining a nonlinear fluid oscillator, a finite-memory multi-input Volterra series, and a compact neural network correction. The multi-input aerodynamic formulation is generalized to m structural modes, capturing direct and nonlinear cross-modal coupling. The model is identified from a single prescribed-motion CFD simulation with simultaneous excitation of all retained structural modes, and is then coupled with the structural equations of motion for efficient aeroelastic prediction. Applied to transonic buffet over the ONERA OAT15A airfoil, the time-marching ROM predicts aeroelastic stability, frequency lock-in, and limit cycle amplitudes in good agreement with full-order reference solutions. The ROM is used to provide substantial new insight into buffet-induced aeroelastic instabilities involving more than one structural mode.

physics.flu-dyn↗

arXiv2025

Reduced-Order Hydrodynamic Modelling of a Sphere Near a Wall Using Sparse Regression and Neural Networks

This work presents an interpretable parametric surrogate model motivated by the need to identify a hydrodynamic model for resolving the trajectory of an object in real-time. The surrogate is formulated as a reduced-order model for a canonical configuration in which a one-degree-of-freedom heaving sphere operates near a vertical wall. High-fidelity CFD simulations are used to generate a parametric dataset of heave-decay responses over varying wall distances (WD) and drop heights (DH). Sparse Identification of Nonlinear Dynamics (SINDy) is then applied to each CFD trajectory to identify a low-order nonlinear ordinary differential equation (ODE) with polynomial terms representing effective hydrostatic restoring and radiation damping, and the harmonic terms representing the wave-induced excitation forces. The SINDy identified coefficients are then used as a prior constraint in a neural operator network (ONet) that learns a smooth mapping from wall distance and drop height to the ODE coefficients, yielding a surrogate capable of predicting dynamics at arbitrary points in the input space without rerunning expensive CFD calculations. The resulting surrogate reproduces CFD heave-decay responses with near-optimal accuracy given the limiting assumptions while being capable of running in real time. The approach provides a practical pathway toward real-time, physics-informed surrogate modelling for launch-and-recovery operations.

physics.flu-dyn↗

arXiv2025

Aeroelastic Reduced-Order Model Differential Equations in Transonic Buffeting Flow

Numerical simulation of the transonic shock buffet phenomenon remains a formidable challenge due to its inherent nonlinear and unsteady characteristics. These difficulties are further compounded in three-dimensional configurations and when aeroelastic coupling is considered. Consequently, computational studies of aeroelastic shock buffet interactions have largely been confined to two-dimensional systems. This limitation underscores the need for reduced-order models (ROMs) capable of efficiently and accurately capturing the aeroelastic response of structures subjected to shock buffet oscillations. This paper presents a novel nonlinear unsteady aerodynamic ROM that integrates nonlinear oscillator dynamics with Volterra theory to model aeroelastic shock buffet phenomena. The coefficients and terms of the resulting Integro-Differential Equation ROM (IDE-ROM) are identified using the Orthogonal Matching Pursuit (OMP) algorithm. Application of the IDE-ROM to an OAT15A airfoil demonstrates that the compact and computationally efficient formulation can reproduce key nonlinear behaviors, including aeroelastic lock-in, with a high degree of accuracy. The limitations and potential extensions of the proposed approach are also critically examined.

physics.flu-dyn↗

arXiv2025

A Numerical Investigation of the Aeroelastic Interaction between Transonic Buffet and Structural Nonlinearity

Transonic shock buffet is a nonlinear, unsteady aerodynamic phenomenon characterized by self-sustained, periodic shock oscillations that can critically affect aircraft structural integrity. While the aerodynamic aspects of shock buffet have been widely studied, its interaction with nonlinear structural dynamics remains largely unexplored. This paper presents, for the first time, a numerical investigation of aeroelastic interactions arising from the coupling of shock buffet with a nonlinear structural model featuring pitch freeplay. Using unsteady Reynolds-Averaged Navier-Stokes (URANS) simulations coupled with a two-degree-of-freedom heave-pitch airfoil model, the study reveals that structural nonlinearity can induce aerodynamic lock-in to superharmonics of the heave natural frequency, resulting in 2:1 and 3:1 resonance mechanisms and large-amplitude heave limit cycles. These newly identified resonance behaviors expand the current understanding of transonic aeroelastic instabilities. The influence of key parameters such as structural-to-fluid mass ratio and structural damping on these phenomena is also systematically examined. This work introduces a novel class of aeroelastic lock-in mechanisms with significant implications for transonic flight dynamics and aircraft design.

physics.flu-dyn↗

arXiv2024

Parsimonious Dynamic Mode Decomposition: A Robust and Automated Approach for Optimally Sparse Mode Selection in Complex Systems

This paper introduces the Parsimonious Dynamic Mode Decomposition (parsDMD), a novel algorithm designed to automatically select an optimally sparse subset of dynamic modes for both spatiotemporal and purely temporal data. By incorporating time-delay embedding and leveraging Orthogonal Matching Pursuit (OMP), parsDMD ensures robustness against noise and effectively handles complex, nonlinear dynamics. The algorithm is validated on a diverse range of datasets, including standing wave signals, identifying hidden dynamics, fluid dynamics simulations (flow past a cylinder and transonic buffet), and atmospheric sea-surface temperature (SST) data. ParsDMD addresses a significant limitation of the traditional sparsity-promoting DMD (spDMD), which requires manual tuning of sparsity parameters through a rigorous trial-and-error process to balance between single-mode and all-mode solutions. In contrast, parsDMD autonomously determines the optimally sparse subset of modes without user intervention, while maintaining minimal computational complexity. Comparative analyses demonstrate that parsDMD consistently outperforms spDMD by providing more accurate mode identification and effective reconstruction in noisy environments. These advantages render parsDMD an effective tool for real-time diagnostics, forecasting, and reduced-order model construction across various disciplines.

stat.ME↗

arXiv2024

Efficient Transonic Aeroelastic Model Reduction Using Optimized Sparse Multi-Input Polynomial Functionals

Nonlinear aeroelastic reduced-order models (ROMs) based on machine learning or artificial intelligence algorithms can be complex and computationally demanding to train, meaning that for practical aeroelastic applications, the conservative nature of linearization is often favored. Therefore, there is a requirement for novel nonlinear aeroelastic model reduction approaches that are accurate, simple and, most importantly, efficient to generate. This paper proposes a novel formulation for the identification of a compact multi-input Volterra series, where Orthogonal Matching Pursuit is used to obtain a set of optimally sparse nonlinear multi-input ROM coefficients from unsteady aerodynamic training data. The framework is exemplified using the Benchmark Supercritical Wing, considering; forced response, flutter and limit cycle oscillation. The simple and efficient Optimal Sparsity Multi-Input ROM (OSM-ROM) framework performs with high accuracy compared to the full-order aeroelastic model, requiring only a fraction of the tens-of-thousands of possible multi-input terms to be identified and allowing a 96% reduction in the number of training samples.

physics.flu-dyn↗

arXiv2024

Optimal Sparsity in Nonlinear Non-Parametric Reduced Order Models for Transonic Aeroelastic Systems

Machine learning and artificial intelligence algorithms typically require large amount of data for training. This means that for nonlinear aeroelastic applications, where small training budgets are driven by the high computational burden associated with generating data, usability of such methods has been limited to highly simplified aeroelastic systems. This paper presents a novel approach for the identification of optimized sparse higher-order polynomial-based aeroelastic reduced order models (ROM) to significantly reduce the amount of training data needed without sacrificing fidelity. Several sparsity promoting algorithms are considered, including; rigid sparsity, LASSO regression, and Orthogonal Matching Pursuit (OMP). The study demonstrates that through OMP, it is possible to efficiently identify optimized s-sparse nonlinear aerodynamic ROMs using only aerodynamic response information. This approach is exemplified in a three-dimensional aeroelastic stabilator model experiencing high amplitude freeplay-induced limit cycles. The comparison shows excellent agreement between the ROM and the full-order aeroelastic response, including the ability to generalize to new freeplay and velocity index values, with online computational savings of several orders of magnitude. The development of an Optimally Sparse ROM (OS-ROM) extends previous higher-order polynomial-based ROM approaches for feasible application to complex three-dimensional nonlinear aeroelastic problems, without incurring significant computational burdens or loss of accuracy.

physics.flu-dyn↗

arXiv2024

A Data-driven Approach for Rapid Detection of Aeroelastic Modes from Flutter Flight Test Based on Limited Sensor Measurements

Flutter flight test involves the evaluation of the airframes aeroelastic stability by applying artificial excitation on the aircraft lifting surfaces. The subsequent responses are captured and analyzed to extract the frequencies and damping characteristics of the system. However, noise contamination, turbulence, non-optimal excitation of modes, and sensor malfunction in one or more sensors make it time-consuming and corrupt the extraction process. In order to expedite the process of identifying and analyzing aeroelastic modes, this study implements a time-delay embedded Dynamic Mode Decomposition technique. This approach is complemented by Robust Principal Component Analysis methodology, and a sparsity promoting criterion which enables the automatic and optimal selection of sparse modes. The anonymized flutter flight test data, provided by the fifth author of this research paper, is utilized in this implementation. The methodology assumes no knowledge of the input excitation, only deals with the responses captured by accelerometer channels, and rapidly identifies the aeroelastic modes. By incorporating a compressed sensing algorithm, the methodology gains the ability to identify aeroelastic modes, even when the number of available sensors is limited. This augmentation greatly enhances the methodology's robustness and effectiveness, making it an excellent choice for real-time implementation during flutter test campaigns.

eess.SP↗