arXiv subjects

Philippe Colomban

Publications and source records attributed to Philippe Colomban.

13 recordsLinked to original sources

arXiv2010

Raman spectra database of the glass beads excavated on mapungubwe hill and k2, two archaeological sites in South Africa

About two hundred coloured glass beads (red, yellow, green, blue, white, black, pink, plum) were selected among the thousands of beads excavated on Mapungubwe hill and at K2, archaeological sites in the Limpopo valley South Africa, and have been studied with Raman scattering. The glass matrix of the beads was classified according to its Raman signature into 3 main sub-groups and corroded glass could also be identified. At least seven different chromophores or pigments (lazurite, lead tin yellow type II, Ca/Pb arsenate, chromate, calcium antimonate, Fe-S "amber" and a spinel) have been identified. Many of the pigments were only manufactured after the 13th century that confirms the presence of modern beads in the archaeological record. This calls for further research to find a way to reconcile the carbon dating of the hill, which currently gives the last occupation date on the hill as 1280 AD with the physical evidence of the modern beads excavated on the hill.

cond-mat.mtrl-sci↗

arXiv2010

Vegetable ash as raw material in the production of glasses and enamels, for example the contemporary vegetable ashes from Burgundy, France

The powdery nature and high alkali content of vegetable ashes make them ideal raw materials to be used as modifiers of silicate compositions (glasses, enamels and ceramics). Their utilisation since ancient times is described in the literature of the history of glasses, but studies on the analyses of their composition are still limited. We discuss here the compositions of tree and shrub ashes (wattle, hawthorn, oak, green oak, olive wood, elm, poplar, apple tree, vine shoot), of plants (carex, fern, dogwood), of cereals (wheat, maize, rice), threshing waste and hay, mainly harvested in Maconnais, near Taizé (Saône-et-Loire, France), by the potter Brother D. de Montmolin. The contributions in alkali modifiers (Na2O, K2O), alkaline-earth (CaO, MgO) and in silica are discussed in view of the data gathered from the literature of the history of techniques used in the production of ceramics, enamels and glasses. The huge variation in composition is usually attributed to recycling and is questioned by the very broad range of compositions that we obtained in the analyses of the ashes.

cond-mat.mtrl-sci↗

arXiv2010

Les cendres végétales, matières premières des verres et des émaux : un exemple, les cendres de végétaux utilisées par Fr. D de Montmolin

cond-mat.mtrl-sci↗

arXiv2007

Nanomechanics of single keratin fibres: A Raman study of the alpha helix -> beta sheet transition and water effect

The use of micro-Raman spectroscopy, through chemical bond nano-scale probes, allows the changes in conformations (alpha helix -> beta sheet), chain orientation, disconnection of disulfide bonds (-20%) and the increase of intra and inter-chain distances during the strain to be distinguished. The combination of micro-Raman spectroscopy and a allows a quantitative measure of the extension of chemical bonds in the peptidic chain during loading. The nano-structural transformations of keratin during the strain of human hair in a dry environment (40-60 % relative humidity) and saturated with water have been studied. The water permits the sliding of the chains and decreases the bond energy hair. Spectral analyses and 2D correlation are two coherent and independent methods to follow change the Raman probes which are sensitive to structural . The between nano-mechanical (Raman) and micro-mechanical (strain/stress) analyses confirms the validity of the experimental results, tools and principles used, as well as the agreement with the structural model of keratin fibres described by Chapman & Hearle.

cond-mat.mtrl-sci↗

arXiv2007

Raman Spectroscopy of Nanostructures and Nanosized Materials

The interest of micro and tip-enhanced Raman spectroscopy to analyze nanosized and nanostructured materials, chiefly semiconductors, oxides and pristine or functionalized carbon nanotubes, is reviewed at the light of the contributions to this special issue. Particular attention is paid to the fact that chemical reactions, size or shape distribution, defects, strain and couplings may add to nano-dimensionality in defining the Raman signature.

cond-mat.mtrl-sci↗

arXiv2007

Polymerisation Degree and Raman Identification of Ancient Glasses used for Jewellery, Ceramics Enamels and Mosaics

We demonstrate the utility of Raman spectroscopy as a technique for the identification of ancient glasses and enamel coatings of ceramics. As for any silicate glasses, the addition of network modifiers breaks the Si-O linkages and modifies the degree of polymerisation and hence the relative intensity of the Si-O bending and stretching modes. We demonstrate empirically that the ratio of these envelopes is well correlated to the glass structure and to the used firing technology. Spectral Qn components assigned to isolated and connected SiO4 vibrational units allow more precise analysis. Selected porcelains, faiences, potteries and glasses representative of the different Asian, Islamic and European production technologies were studied. Modern porcelain enamels are used as compositional references.

cond-mat.mtrl-sci↗

arXiv2007

Non-Destructive Mechanical Characterization of Sic Fibers by Raman Spectroscopy

The paper provides a comprehensive study on Raman spectroscopy versatility as a fast and non destructive tool for the prediction of the mechanical properties of SiC fibers derived from a polymeric precursor (NLM, Hi, Hi-S, SA and Sylramic grades) or produced by CVD (SCS-6 fiber), including in situ analysis in CMCs or MMCs. We show how the results of very simple spectra fitting are correlated with Young's modulus, tensile strength and micro-hardness. The reason why such a correlation exists, the common dependency of Raman signal and mechanical behavior to the micro/nanostructure of ceramics, is discussed.

cond-mat.mtrl-sci↗

arXiv2007

Raman Spectrometry, a Unique Tool to Analyze and Classify Ancient Ceramics and Glasses

Raman micro/macro-spectroscopy allows for a non-destructive remote analysis: body and glaze, crystalline and amorphous phases can be identified, including the nanosized pigments colouring the glaze. Last generation instruments are portable which allows for examination in museum, on sites, etc. This paper gives an overview on the potential of Raman spectrometry technique to analyze ancient ceramics and glasses. Selected glasses as well as glazes of various porcelains, celadon, faiences and potteries, representative of the different production technologies used in the Antique, European, Mediterranean, Islamic and Asian worlds were studied. Their identification is based on the study of the Raman fingerprint of crystalline and glassy phases. Raman parameters allow for the classification as a function of composition and/or processing temperature. Special attention is given to the spectra of amorphous and coloring phases (pigment).

cond-mat.mtrl-sci↗

arXiv2007

Raman/Cr3+ Fluorescence Mapping of Melt-Grown Al2o3/Gdalo3 Eutectics

The paper reports on the Raman/fluorescence study of melt-grown Al2O3/GdAlO3 eutectic composites. Raman bands from the -alumina and gadolinium perovskite phases identified by X-ray diffraction were systematically observed together in the domains optically visible, even when the latter were much larger than the Raman probe. This suggests a more complex interlocking pattern than appearing on SEM or optical microscopy images. The polarization of alumina and GdAlO3 Raman bands evidenced the preferential orientation of Al2O3 phase with respect to the sample growth direction, in agreement with TEM results. In addition, the position of chromium impurity fluorescence bands was used to map the residual stress in alumina phase. It is a compression in the 200-300 MPa range.

cond-mat.mtrl-sci↗

arXiv2007

Phase diagram and Raman Imaging of Grain Growth Mechanisms in Highly Textured Pb(Mg1/3Nb2/3)O3-PbTiO3 Piezoelectric Ceramics

Pb(Mg1/3Nb2/3)O3-PbTiO3 solid solution (PMN(1-x)-PTx) ceramics with 0 <x<1 have been prepared by homo-epitaxial templated grain growth (HTGG) using cubic PMN-PT single crystal seeds as templates and nanoparticles for thes ceramic matrix. Samples were prepared using the doctor Blade method and sintered in a controlled atmosphere. They were then analysed by DTA, TGA, optical/scanning electron microscopy, Raman spectroscopy and imaging. Relationships between Raman parameters such as band component or area versus composition (x) are proposed. Wavenumber and peak area shifts from the single crystal seed centre to periphery growth are assigned to compositional change. Representative medium to highly textured ceramics with Lotgering factors of ~0.7 and 0.9 were sintered at 1150 degrees C and 1200 degrees C, respectively, and studied by direct and smart Raman imaging. The Raman peak centre of gravity depends on the solid solution composition whereas peak intensity is correlated to the unit-cell distorsion and related short-range structure. Two different growth mechanisms are observed: below ~1200 degrees C, sharp corner and straight edged single crystal seeds develop through a liquid I phase at the crystal/matrix interface; at higher temperatures, the matrix is consumed and crystal growth develops in contact with a liquid II phase, through the help of the high PbO partial pressure. Smart Raman imaging shows that the final composition and structure is very close to that of the matrix. Formation of short-range ordered B/B' domains is expected. A phase diagram is proposed.

cond-mat.mtrl-sci↗

arXiv2007

Ochre decor and Cinnabar Residues in Neolithic Pottery from Vinuca, Serbia

The prehistoric site of Vinuca, on the right bank of the River Danube, the territory of the City of Belgrade, first excavated by Dr Miloje Vasić; (1931-1934) provides Neolithic pottery dating back to 5200 - 4200 B.C. Shards excavated in 1998 (Serbian Academy of Sciences and Arts) have a yellow coating on the external (convex) and red deposit on the internal (concave) side. Raman, IR and X-ray identification prove that yellow-to-red decor deposited on the external faces of pottery is made of ochre, a mixture of hematite, quartz and phyllosilicates. Red deposit, found on some internal surfaces of a pottery, consists of cinnabar (HgS) with some quartz and phyllosilicates. This indicates that cinnabar was not used for decor but for some other purposes, preparations made in ceramic utensils. A comparison is made with the mercury ore from a Suplja Stena mine located ~ 20 km from the Vinuca village.

cond-mat.mtrl-sci↗

arXiv2006

On Site Raman Analysis of Iznik Pottery Glazes and Pigments

On site Raman analyses were performed at the Musée national de Céramique, Sèvres, France, on rare Iznik (former Nicaea) pottery produced from ~1480 to ~1620. A comparison is made with a series of shards. The town of production of these potteries was highly disputed in the 80's and many questions still remain. The potential of glaze on-site analyses as a classification/datating tool is evaluated. The structure of the silicate glaze does not change with the sample (index of polymerisation ~ 0.5-0.8, indicating a lead silicate composition; characteristic Si-O stretching mode doublet at \~985 and 1030-1050 cm-1). By contrast the corresponding signature of most of the "Kütahya" wares peaks at ~1070-1090 cm-1. The lowest index is measured for a brilliant overglazed red bole, according to a lower temperature of (post)firing. The different crystalline phases identified in the glaze are -quartz, haematite, spinel, cassiterite, uvarovite garnet and zircon. White colour arises from -quartz slip in most samples studied. Cassiterite (SnO2) opacifier is only present in some early blue-and-white ceramics (Master of the Knots and Baba Nakkas style, ca. 1510-1530) and we do not have other evidence of its intentional use as an opacifier. Intentional addition of tin oxide is likely for colour lightening in some red, blue and in clear green boles. At least two types of red glazes and two types of Cr-containing green pigments are evidenced.

cond-mat.mtrl-sci↗

arXiv2006

Nanomechanics of Advanced Polymer Fibres

The micro/nano-structural evolution before and after tensile/compressive loading, fatigue and ultimately, failure has been studied by Raman (and IR) microspectroscopy for PBO, PET, PA66, PP, silk and hair using three probes: low wavenumber collective modes at <150cm-1 as representative of the crystalline/ordered and amorphous chains, stretching and bending modes, as representative of the C-C/ C-N polymeric backbone, and localized vibrations (OH, NH) to probe the inter-macromolecule segment distance. Wavenumber and bandwidth distribution across fibre diameters reveal different types of skin/core heterogeneity. The in situ analysis at different strain/pressure levels shows that amorphous chains in the fibre accommodate the stress differently. The post mortem analysis shows that amorphous domains can be higly stressed during the failure and remnant stress can be measured.

cond-mat.mtrl-sci↗