arXiv subjects

Philip Jonathan

Publications and source records attributed to Philip Jonathan.

At least 19 recordsLinked to original sources

arXiv2026

Diagnostic Tools for Extreme Value Regression Models

Visual and quantitative goodness-of-fit diagnostics are an important tool in the practitioner's toolbox. The need for convincing and reliable diagnostics is particularly clear when fitting extreme value regression models, which are used for extrapolation far beyond the observable range of the response variable, and often evaluated at unobserved covariate values. Despite this, few diagnostics have been developed for extreme value regression models, and those available often suffer in terms of interpretability or scalability on low-dimensional or non-Euclidean covariate domains, often encountered in modern applications. Moreover, existing methods tend to offer a global perspective on model fit; that is, they quantify goodness-of-fit across the entire dataset, without offering insight into regions of the covariate space where the model fit may be poor. We propose two novel visual diagnostics for extreme value regression models: the standardised tail plot and the normalised residual plot. By considering the asymptotic distribution of normalised exceedance probabilities, we show that uncertainty bounds for our plots are approximately independent of the sample size used in their construction. This allows us to propose visual diagnostics which can efficiently and consistently compare goodness-of-fit at both a global and regional level, despite varying sample sizes over regions of the covariate domain. Following a discussion of summary statistics for global and regional goodness-of-fit, we provide two applications of extreme value regression models that illustrate how our diagnostics can be used to perform model comparison (across thousands of candidate models) and provide actionable findings that support model design.

stat.ME↗

arXiv2026

Model selection in extreme value regression for estimation of changes in return values over time applied to extreme annual regional CMIP6 desert temperatures

Estimating changes in extremes quantiles from environmental processes non-stationary in time, from small samples is challenging since it is difficult to characterise tail non-stationarity adequately. Using annual maxima and minima of near-surface temperature (tas) from CMIP6 output for some Earth desert regions, we use generalised extreme value (GEV) regression to model changes in extreme quantiles in time. We consider candidate models with different parametric forms for the variation of GEV parameters with time, estimating parameters using Bayesian inference. We select optimal candidate models using model selection criteria, including the Akaike, Bayesian, divergence and widely-applicable information criteria. In an extreme value setting, the performance of different criteria is unreliable. We therefore undertake a simulation study using ground truth models generating data similar to our extrema, to assess performance of the criteria to minimise error in prediction of change DeltaQ in the 100-year return value of tas over (2015,2125). The Bayesian information criterion (BIC) provides best performance, out-performing the divergence and widely-applicable Information criteria. We compare BIC model selection with a stacked Bayesian model average. Using BIC-selected GEV regression, we estimate joint posterior distributions of DeltaQ, coupled over three climate scenarios, for different combinations of desert region, global climate model and climate ensemble. We find significant increases in DeltaQ for regional annual maxima under stronger forcing scenarios for all desert regions. Similar but weaker trends are observed for regional annual minima. There is evidence that extreme minima are warming more rapidly than extreme maxima in Antarctica, whereas most hot desert regions exhibit the opposite effect. An ancillary file of supplementary material is provided.

physics.ao-ph↗

arXiv2025

Sequential Design for the Efficient Estimation of Offshore Structure Failure Probability

Estimation of the failure probability of offshore structures exposed to extreme ocean environments is critical to their safe design and operation. The conditional density of the environment (CDE) quantifies regions of the space of long term environment responsible for extreme structural response. Moreover, the probability of structural failure is obtained by simply integrating the CDE over the environment space. In this work, two methodologies for estimation of the CDE and failure probability are considered. The first (IS-PT) combines parallel tempering MCMC (for CDE estimation) with important sampling (for eventual estimation of failure probability). The second (AGE) combines adaptive Gaussian emulation with Bayesian quadrature. We evaluate IS-PT and two variants of the AGE procedure in application to a simple synthetic structure with multimodal CDE, and a monopile structure exhibiting non-linear resonant response. IS-PT provides reliable results for both applications for lesser compute cost than naive integration. The AGE procedures require balancing exploration and exploitation of the environment space, using a typically-unknown weight parameter, lambda. When lambda is known, perhaps from prior engineering knowledge, AGE provides a further reduction in computational cost over IS-PT. However, when unknown, IS-PT is more reliable.

stat.AP↗

arXiv2025

Deep Learning Surrogates for Real-Time Gas Emission Inversion

Real-time identification and quantification of greenhouse-gas emissions under transient atmospheric conditions is a critical challenge in environmental monitoring. We introduce a spatio-temporal inversion framework that embeds a deep-learning surrogate of computational fluid dynamics (CFD) within a sequential Monte Carlo algorithm to perform Bayesian inference of both emission rate and source location in dynamic flow fields. By substituting costly numerical solvers with a multilayer perceptron trained on high-fidelity CFD outputs, our surrogate captures spatial heterogeneity and temporal evolution of gas dispersion, while delivering near-real-time predictions. Validation on the Chilbolton methane release dataset demonstrates comparable accuracy to full CFD solvers and Gaussian plume models, yet achieves orders-of-magnitude faster runtimes. Further experiments under simulated obstructed-flow scenarios confirm robustness in complex environments. This work reconciles physical fidelity with computational feasibility, offering a scalable solution for industrial emissions monitoring and other time-sensitive spatio-temporal inversion tasks in environmental and scientific modeling.

cs.LG↗

arXiv2025

Calibration of medium-range metocean forecasts for the North Sea

We assess the value of calibrating forecast models for significant wave height Hs, wind speed W and mean spectral wave period Tm for forecast horizons between zero and 168 hours from a commercial forecast provider, to improve forecast performance for a location in the central North Sea. We consider two straightforward calibration models, linear regression (LR) and non-homogeneous Gaussian regression (NHGR), incorporating deterministic, control and ensemble mean forecast covariates. We show that relatively simple calibration models (with at most three covariates) provide good calibration and that addition of further covariates cannot be justified. Optimal calibration models (for the forecast mean of a physical quantity) always make use of the deterministic forecast and ensemble mean forecast for the same quantity, together with a covariate associated with a different physical quantity. The selection of optimal covariates is performed independently per forecast horizon, and the set of optimal covariates shows a large degree of consistency across forecast horizons. As a result, it is possible to specify a consistent model to calibrate a given physical quantity, incorporating a common set of three covariates for all horizons. For NHGR models of a given physical quantity, the ensemble forecast standard deviation for that quantity is skilful in predicting forecast error standard deviation, strikingly so for Hs. We show that the consistent LR and NHGR calibration models facilitate reduction in forecast bias to near zero for all of Hs, W and Tm, and that there is little difference between LR and NHGR calibration for the mean. Both LR and NHGR models facilitate reduction in forecast error standard deviation relative to naive adoption of the (uncalibrated) deterministic forecast, with NHGR providing somewhat better performance.

stat.AP↗

arXiv2025

Changes over time in the 100-year return value of climate model variables

We assess evidence for changes in tail characteristics of wind, solar irradiance and temperature variables output from CMIP6 global climate models (GCMs) due to climate forcing. We estimate global and climate zone annual maximum and annual means for period (2015, 2100) from daily output of seven GCMs for daily wind speed, maximum wind speed, solar irradiance and near-surface temperature. We calculate corresponding annualised data for individual locations within neighbourhoods of the North Atlantic and Celtic Sea region. We consider output for three climate scenarios and multiple climate ensembles. We estimate non-stationary extreme value models for annual extremes, and non-homogeneous Gaussian regressions for annual means, using Bayesian inference. We use estimated statistical models to quantify the distribution of (i) the change in 100-year return value for annual extremes, and (2) the change in annual mean, over the period (2025, 2125). To summarise results, we estimate linear mixed effects models for observed variation of (i) and (ii). Evidence for changes in the 100-year return value for annual maxima of solar irradiance and temperature is much stronger than for wind variables over time and with climate scenario.

stat.AP↗

arXiv2024

Deep learning joint extremes of metocean variables using the SPAR model

This paper presents a novel deep learning framework for estimating multivariate joint extremes of metocean variables, based on the Semi-Parametric Angular-Radial (SPAR) model. When considered in polar coordinates, the problem of modelling multivariate extremes is transformed to one of modelling an angular density, and the tail of a univariate radial variable conditioned on angle. In the SPAR approach, the tail of the radial variable is modelled using a generalised Pareto (GP) distribution, providing a natural extension of univariate extreme value theory to the multivariate setting. In this work, we show how the method can be applied in higher dimensions, using a case study for five metocean variables: wind speed, wind direction, wave height, wave period, and wave direction. The angular variable is modelled using a kernel density method, while the parameters of the GP model are approximated using fully-connected deep neural networks. Our approach provides great flexibility in the dependence structures that can be represented, together with computationally efficient routines for training the model. Furthermore, the application of the method requires fewer assumptions about the underlying distribution(s) compared to existing approaches, and an asymptotically justified means for extrapolating outside the range of observations. Using various diagnostic plots, we show that the fitted models provide a good description of the joint extremes of the metocean variables considered.

stat.ML↗

arXiv2024

Probabilistic Inversion Modeling of Gas Emissions: A Gradient-Based MCMC Estimation of Gaussian Plume Parameters

In response to global concerns regarding air quality and the environmental impact of greenhouse gas emissions, detecting and quantifying sources of emissions has become critical. To understand this impact and target mitigations effectively, methods for accurate quantification of greenhouse gas emissions are required. In this paper, we focus on the inversion of concentration measurements to estimate source location and emission rate. In practice, such methods often rely on atmospheric stability class-based Gaussian plume dispersion models. However, incorrectly identifying the atmospheric stability class can lead to significant bias in estimates of source characteristics. We present a robust approach that reduces this bias by jointly estimating the horizontal and vertical dispersion parameters of the Gaussian plume model, together with source location and emission rate, atmospheric background concentration, and sensor measurement error variance. Uncertainty in parameter estimation is quantified through probabilistic inversion using gradient-based MCMC methods. A simulation study is performed to assess the inversion methodology. We then focus on inference for the published Chilbolton dataset which contains controlled methane releases and demonstrates the practical benefits of estimating dispersion parameters in source inversion problems.

stat.AP↗

arXiv2024

Estimating Metocean Environments Associated with Extreme Structural Response to Demonstrate the Dangers of Environmental Contour Methods

Extreme value analysis (EVA) uses data to estimate long-term extreme environmental conditions for variables such as significant wave height and period, for the design of marine structures. Together with models for the short-term evolution of the ocean environment and for wave-structure interaction, EVA provides a basis for full probabilistic design analysis. Alternatively, environmental contours provide an approximate approach to estimating structural integrity, without requiring structural knowledge. These contour methods also exploit statistical models, including EVA, but avoid the need for structural modelling by making what are believed to be conservative assumptions about the shape of the structural failure boundary in the environment space. These assumptions, however, may not always be appropriate, or may lead to unnecessary wasted resources from over design. We demonstrate a methodology for efficient fully probabilistic analysis of structural failure. From this, we estimate the joint conditional probability density of the environment (CDE), given the occurrence of an extreme structural response. We use CDE as a diagnostic to highlight the deficiencies of environmental contour methods for design; none of the IFORM environmental contours considered characterise CDE well for three example structures.

stat.ME↗

arXiv2024

Inference for bivariate extremes via a semi-parametric angular-radial model

The modelling of multivariate extreme events is important in a wide variety of applications, including flood risk analysis, metocean engineering and financial modelling. A wide variety of statistical techniques have been proposed in the literature; however, many such methods are limited in the forms of dependence they can capture, or make strong parametric assumptions about data structures. In this article, we introduce a novel inference framework for multivariate extremes based on a semi-parametric angular-radial model. This model overcomes the limitations of many existing approaches and provides a unified paradigm for assessing joint tail behaviour. Alongside inferential tools, we also introduce techniques for assessing uncertainty and goodness of fit. Our proposed technique is tested on simulated data sets alongside observed metocean time series', with results indicating generally good performance.

stat.ME↗

arXiv2023

Modelling multivariate extremes through angular-radial decomposition of the density function

We present a new framework for modelling multivariate extremes, based on an angular-radial representation of the probability density function. Under this representation, the problem of modelling multivariate extremes is transformed to that of modelling an angular density and the tail of the radial variable, conditional on angle. Motivated by univariate theory, we assume that the tail of the conditional radial distribution converges to a generalised Pareto (GP) distribution. To simplify inference, we also assume that the angular density is continuous and finite and the GP parameter functions are continuous with angle. We refer to the resulting model as the semi-parametric angular-radial (SPAR) model for multivariate extremes. We consider the effect of the choice of polar coordinate system and introduce generalised concepts of angular-radial coordinate systems and generalised scalar angles in two dimensions. We show that under certain conditions, the choice of polar coordinate system does not affect the validity of the SPAR assumptions. However, some choices of coordinate system lead to simpler representations. In contrast, we show that the choice of margin does affect whether the model assumptions are satisfied. In particular, the use of Laplace margins results in a form of the density function for which the SPAR assumptions are satisfied for many common families of copula, with various dependence classes. We show that the SPAR model provides a more versatile framework for characterising multivariate extremes than provided by existing approaches, and that several commonly-used approaches are special cases of the SPAR model.

stat.ME↗

arXiv2023

covXtreme : MATLAB software for non-stationary penalised piecewise constant marginal and conditional extreme value models

The covXtreme software provides functionality for estimation of marginal and conditional extreme value models, non-stationary with respect to covariates, and environmental design contours. Generalised Pareto (GP) marginal models of peaks over threshold are estimated, using a piecewise-constant representation for the variation of GP threshold and scale parameters on the (potentially multidimensional) covariate domain of interest. The conditional variation of one or more associated variates, given a large value of a single conditioning variate, is described using the conditional extremes model of Heffernan and Tawn (2004), the slope term of which is also assumed to vary in a piecewise constant manner with covariates. Optimal smoothness of marginal and conditional extreme value model parameters with respect to covariates is estimated using cross-validated roughness-penalised maximum likelihood estimation. Uncertainties in model parameter estimates due to marginal and conditional extreme value threshold choice, and sample size, are quantified using a bootstrap resampling scheme. Estimates of environmental contours using various schemes, including the direct sampling approach of Huseby et al. 2013, are calculated by simulation or numerical integration under fitted models. The software was developed in MATLAB for metocean applications, but is applicable generally to multivariate samples of peaks over threshold. The software and case study data can be downloaded from GitHub, with an accompanying user guide.

stat.ME↗

arXiv2023

Avoiding methane emission rate underestimates when using the divergence method

Methane is a powerful greenhouse gas, and a primary target for mitigating climate change in the short-term future due to its relatively short atmospheric lifetime and greater ability to trap heat in Earth's atmosphere compared to carbon dioxide. Top-down observations of atmospheric methane are possible via drone and aircraft surveys as well as satellites such as the TROPOspheric Monitoring Instrument (TROPOMI). Recent work has begun to apply the divergence method to produce regional methane emission rate estimates. Here we show that when the divergence method is applied to spatially incomplete observations of methane, it can result in negatively biased time-averaged regional emission rates. We show that this effect can be counteracted by adopting a procedure in which daily advective fluxes of methane are time-averaged before the divergence method is applied. Using such a procedure with TROPOMI methane observations, we calculate yearly Permian emission rates of 3.1, 2.4 and 2.7 million tonnes per year for the years 2019 through 2021. We also show that highly-resolved plumes of methane can have negatively biased estimated emission rates by the divergence method due to the presence of turbulent diffusion in the plume, but this is unlikely to affect regional methane emission budgets constructed from TROPOMI observations of methane. The results from this work are expected to provide useful guidance for future implementations of the divergence method for emission rate estimation from satellite data -- be it for methane or other gaseous species in the atmosphere.

physics.ao-ph↗

arXiv2023

Temporal evolution of the extreme excursions of multivariate $k$th order Markov processes with application to oceanographic data

We develop two models for the temporal evolution of extreme events of multivariate $k$th order Markov processes. The foundation of our methodology lies in the conditional extremes model of Heffernan & Tawn (2004), and it naturally extends the work of Winter & Tawn (2016,2017) and Tendijck et al. (2019) to include multivariate random variables. We use cross-validation-type techniques to develop a model order selection procedure, and we test our models on two-dimensional meteorological-oceanographic data with directional covariates for a location in the northern North Sea. We conclude that the newly-developed models perform better than the widely used historical matching methodology for these data.

stat.ME↗

arXiv2022

Uncertainties in estimating the effect of climate change on 100-year return value for significant wave height

Estimating climate effects on future ocean storm severity is plagued by large uncertainties, yet for safe design and operation of offshore structures, best possible estimates of climate effects are required given available data. We explore the variability in estimates of 100-year return value of significant wave height (Hs) over time, for output of WAVEWATCHIII models from 7 representative CMIP5 GCMs, and the FIO-ESM v2.0 CMIP6 GCM, for neighbourhoods of locations east of Madagascar and south of Australia. Non-stationary extreme value analysis of peaks-over-threshold and block maxima using Bayesian inference provide posterior estimates of return values as a function of time; MATLAB software is provided. There is large variation between return value estimates from different GCMs, and with longitude and latitude within each neighbourhood. These sources of uncertainty tend to be larger than that due to typical modelling choices (such as choice of threshold for POT, or block length for BM). However, careful threshold and block length are critical east of Madagascar, because of the presence of a mixed population of storms there. The long 700-year pre-industrial control (piControl) output of the CMIP6 GCM allows quantification of the apparent inherent variability in return value as a function of time.

physics.ao-ph↗

arXiv2022

Extremal Characteristics of Conditional Models

Conditionally specified models are often used to describe complex multivariate data. Such models assume implicit structures on the extremes. So far, no methodology exists for calculating extremal characteristics of conditional models since the copula and marginals are not expressed in closed forms. We consider bivariate conditional models that specify the distribution of $X$ and the distribution of $Y$ conditional on $X$. We provide tools to quantify implicit assumptions on the extremes of this class of models. In particular, these tools allow us to approximate the distribution of the tail of $Y$ and the coefficient of asymptotic independence $\eta$ in closed forms. We apply these methods to a widely used conditional model for wave height and wave period. Moreover, we introduce a new condition on the parameter space for the conditional extremes model of Heffernan and Tawn (2004), and prove that the conditional extremes model does not capture $\eta$, when $\eta<1$.

math.ST↗

arXiv2022

Statistical estimation of spatial wave extremes for tropical cyclones from small data samples: validation of the STM-E approach using long-term synthetic cyclone data for the Caribbean Sea

Occurrences of tropical cyclones at a location are rare, and for many locations, only short periods of observations or hindcasts are available. Hence, estimation of return values (corresponding to a period considerably longer than that for which data is available) for cyclone-induced significant wave height (SWH) from small samples is challenging. The STM-E (space-time maximum and exposure) model was developed to provide reduced bias in estimates of return values compared to competitor approaches in such situations, and realistic estimates of return value uncertainty. STM-E exploits data from a spatial neighbourhood satisfying certain conditions, rather than data from a single location, for return value estimation. This article provides critical assessment of the STM-E model for tropical cyclones in the Caribbean Sea near Guadeloupe for which a large database of synthetic cyclones is available, corresponding to more than 3,000 years of observation. Results indicate that STM-E yields values for the 500-year return value of SWH and its variability, estimated from 200 years of cyclone data, consistent with direct empirical estimates obtained by sampling 500 years of data from the full synthetic cyclone database; similar results were found for estimation of the 100-year return value from samples corresponding to approximately 50 years of data. In general, STM-E also provides reduced bias and more realistic uncertainty estimates for return values relative to single location analysis.

stat.AP↗

arXiv2022

A multivariate pseudo-likelihood approach to estimating directional ocean wave models

Ocean buoy data in the form of high frequency multivariate time series are routinely recorded at many locations in the world's oceans. Such data can be used to characterise the ocean wavefield, which is important for numerous socio-economic and scientific reasons. This characterisation is typically achieved by modelling the frequency-direction spectrum, which decomposes spatiotemporal variability by both frequency and direction. State-of-the-art methods for estimating the parameters of such models do not make use of the full spatiotemporal content of the buoy observations due to unnecessary assumptions and smoothing steps. We explain how the multivariate debiased Whittle likelihood can be used to jointly estimate all parameters of such frequency-direction spectra directly from the recorded time series. When applied to North Sea buoy data, debiased Whittle likelihood inference reveals smooth evolution of spectral parameters over time. We discuss challenging practical issues including model misspecification, and provide guidelines for future application of the method.

stat.AP↗