arXiv subjects

Philip Beck

Publications and source records attributed to Philip Beck.

15 recordsLinked to original sources

arXiv2026

In-plane ferromagnetism-driven topological nodal-point superconductivity with tilted Weyl cones

The potential application of topological superconductivity in quantum transport and quantum information has fueled an intense investigation of hybrid materials with emergent electronic properties, including magnet-superconductor heterostructures. Here, we report evidence of a topological nodal-point superconducting phase in a one-atom-thick in-plane ferromagnet in direct proximity to a conventional $s$-wave superconductor. Low-temperature scanning tunneling spectroscopy data reveal the presence of a double-peak low-energy feature in the local density of states of the hybrid system, which is rationalized via model calculations to be an emergent topological nodal-point superconducting phase with tilted Weyl cones. Our results further establish the combination of in-plane ferromagnetism and conventional superconductivity as a route to design two-dimensional topological quantum phases.

cond-mat.supr-con↗

arXiv2025

Coexistence of topologically trivial and non-trivial Yu-Shiba-Rusinov bands in magnetic atomic chains on a superconductor

Majorana zero modes (MZMs) have been proposed as a promising basis for Majorana qubits offering great potential for topological quantum computation. Such modes may form at the ends of a magnetic atomic chain on a superconductor. Typically only a single MZM may be present at one end of the chain, but symmetry may protect multiple MZMs at the same end. Here, we study the topological properties of Yu-Shiba-Rusinov (YSR) bands of excitations in Mn chains constructed on a Nb(110) and on a Ta(110) substrate using first-principles calculations and scanning tunneling microscopy and spectroscopy experiments. We demonstrate that even and odd YSR states with respect to mirroring on the symmetry plane containing the chain have different dispersions, and both of them may give rise to MZMs separately. Although the spin-orbit coupling leads to a hybridization between the bands, multiple MZMs may still exist due to the mirror symmetry. These findings highlight the influence of symmetries on interpreting the spectroscopic signatures of candidates for MZMs.

cond-mat.supr-con↗

arXiv2023

Search for large topological gaps in atomic spin chains on proximitized superconducting heavy metal layers

One-dimensional systems comprising s-wave superconductivity with meticulously tuned magnetism and spin-orbit coupling can realize topologically gapped superconductors hosting Majorana edge modes whose stability is determined by the gap's size. The ongoing quest for larger topological gaps evolved into a material science issue. However, for atomic spin chains on superconductor surfaces, the effect of the substrate's spin-orbit coupling on the system's topological gap size is largely unexplored. Here, we introduce an atomic layer of the heavy metal Au on Nb(110) which combines strong spin-orbit coupling and a large superconducting gap with a high crystallographic quality enabling the assembly of defect-free Fe chains using a scanning tunneling microscope tip. Scanning tunneling spectroscopy experiments and density functional theory calculations reveal ferromagnetic coupling and ungapped YSR bands in the chain despite of the heavy substrate. By artificially imposing a spin spiral state our calculations indicate a minigap opening and zero-energy edge state formation. The presented methodology paves the way towards a material screening of heavy metal layers on elemental superconductors for ideal systems hosting Majorana edge modes protected by large topological gaps.

cond-mat.supr-con↗

arXiv2022

Testing the topological nature of end states in antiferromagnetic atomic chains on superconductors

Edge states forming at the boundaries of topologically non-trivial phases of matter are promising candidates for future device applications because of their stability against local perturbations. Magnetically ordered spin chains proximitized by an s-wave superconductor are predicted to enter a topologically non-trivial mini-gapped phase with zero-energy Majorana modes (MMs) localized at their ends. However, the presence of non-topological end states mimicking MM properties can spoil their unambiguous observation. Here, we report on a method to experimentally decide on the MM nature of end states observed for the first time in antiferromagnetic spin chains. Using scanning tunneling spectroscopy, we find end states at either finite or near-zero energy in Mn chains on Nb(110) or Ta(110), respectively, within a large minigap. By introducing a locally perturbing defect on one end of the chain, the end state on this side splits off from zero-energy while the one on the other side doesn't - ruling out their MM origin. A minimal model shows that, while wide trivial minigaps hosting such conventional end states are easily achieved in antiferromagnetic spin chains, unrealistically large spin-orbit couplings are required to drive the system into the topologically nontrivial phase with MMs. The methodology of perturbing chains by local defects is a powerful tool to probe the stability of future candidate topological edge modes against local disorder.

cond-mat.supr-con↗

arXiv2022

Epitaxial growth of a two-dimensional topological insulator candidate: monolayer Si2Te2

Hexagonal Si2Te2 monolayers (ML-Si2Te2) were predicted to show strain-dependent band-crossover between semiconducting and room-temperature quantum spin Hall phases. However, investigations on this artificial two-dimensional (2D) material have mainly been restricted to theoretical calculations because its bulk counterpart does not exist naturally. Here, we report on the successful epitaxial growth of ML-Si2Te2 films on Sb2Te3 thin film substrates. High-quality (1*1) ML-Si2Te2 films with a coverage as high as 95% were obtained as revealed by scanning tunneling microscopy. X-ray photoelectron spectroscopy confirms the absence of intermixing between Si2Te2 and Sb2Te3 at the interface. By combining scanning tunneling spectroscopy with density functional theory calculations, we demonstrate the semiconducting band structure of ML-Si2Te2 on Sb2Te3. Furthermore, it is theoretically predicted that the system can be driven into the nontrivial phase via reducing the strain by 4.4% using strain engineering. Our results pave the way for in-depth investigations on this 2D topological insulator candidate.

cond-mat.mtrl-sci↗

arXiv2022

Effect of substrate spin-orbit coupling on the topological gap size of Shiba chains

Realizing Majorana bound states in chains of magnetic impurities on $s$-wave superconducting substrates relies on a fine tuning of the energy and hybridization of the single magnetic impurity bound states and of the spin-orbit coupling (SOC). While recent experiments investigate the influence of the former two parameters, the effect of SOC remained experimentally largely unexplored. Here, we present a scanning tunneling spectroscopy study of close-packed Mn chains along the [001]-direction on Ta(110) which has almost identical atomic and surface electronic structure compared to the previously studied Nb(110) system, but a three times larger SOC. The dominant Shiba band has a very similar dispersion, but its minigap, taken relative to $\varDelta$, is increased by a factor of 1.9 with respect to the Nb case, which can be ascribed to the stronger SOC.

cond-mat.supr-con↗

arXiv2022

Systematic study of Mn atoms, artificial dimers and chains on superconducting Ta(110)

Magnetic adatoms coupled to an $s$-wave superconductor give rise to local bound states, so-called Yu-Shiba-Rusinov states. Focusing on the ultimate goal of tailoring chains of such adatoms into a topologically superconducting phase, we investigate basic building blocks - single Fe and Mn adatoms and Mn dimers on clean superconducting Ta(110) - using scanning tunneling microscopy and spectroscopy. We perform a systematic study of the hybridizations and splittings in dimers, and their dependence on the crystallographic directions and interatomic spacings, in order to identify potentially interesting chain geometries for this novel sample type. Subsequently, we study the spin structure as well as the length dependent Shiba band structure in Mn chains of those geometries using spin-resolved scanning tunneling spectroscopy. All results are compared to the according properties of structurally identical dimers and chains on the previously studied Nb(110), which has almost identical surface structure and electronic properties, but an about three times smaller spin-orbit interaction.

cond-mat.supr-con↗

arXiv2021

Structural and Superconducting Properties of Ultrathin Ir Films on Nb(110)

The ongoing quest for unambiguous signatures of topological superconductivity and Majorana modes in magnet-superconductor hybrid systems creates a high demand for suitable superconducting substrates. Materials that incorporate $s$-wave superconductivity with a wide energy gap, large spin-orbit coupling, and high surface quality, which enable the atom-by-atom construction of magnetic nanostructures using the tip of a scanning tunneling microscope, are particularly desired. Since single materials rarely fulfill all these requirements we propose and demonstrate the growth of thin films of a high-Z metal, Ir, on a surface of the elemental superconductor with the largest energy gap, Nb. We find a strained Ir(110)/Nb(110)-oriented superlattice for one to two atomic layer thin films, which transitions to a compressed Ir(111) surface for 10 atomic layer thick films. Using tunneling spectroscopy we observe proximity-induced superconductivity in the latter Ir(111) film with a hard gap $\Delta$ that is $85.3\%$ of that of bare Nb(110).

cond-mat.supr-con↗

arXiv2021

Majorana modes with side features in magnet-superconductor hybrid systems

Magnet-superconductor hybrid (MSH) systems represent promising platforms to host Majorana zero modes (MZMs), the elemental building blocks for fault-tolerant quantum computers. Theoretical description of such MSH structures is mostly based on simplified models, not accounting for the complexity of real materials. Here, based on density functional theory, we derive a superconducting 80-band model to study an MSH system consisting of a magnetic manganese chain on the s wave superconductor niobium. For a wide range of values of the superconducting order parameter, the system is a topological superconductor, with MZMs exhibiting non-universal spatial patterns and a drastic accumulation of spectral weight on both sides along the magnetic chain. These side feature states can be explained by an effective model which is guided by the ab initio results. Performing scanning tunneling spectroscopy experiments on the same system, we observe a spatial structure in the low-energy local density of states that is consistent with the theoretical findings. Our results open a first-principle approach to the discovery of topological superconductors.

cond-mat.supr-con↗

arXiv2021

Controlled length-dependent interaction of Majorana modes in Yu-Shiba-Rusinov chains

Magnetic atoms on superconductors induce localized Yu-Shiba-Rusinov (YSR) bound states. The proposal that topological superconductivity and Majorana modes can be engineered in arrays of hybridizing YSR states has led to their intense investigation. Here, we study Majorana modes emerging from bands of hybridized YSR states in artificially constructed Manganese (Mn) chains on superconducting Niobium (Nb). By controlling the chain geometry on the single atom level, we can measure the interaction-induced energy splitting of Majorana modes from both chain's ends with increasing chain length. We find periodic lengths where their interaction is tuned to zero within the experimental energy resolution. Our work unravels ways to manipulate and minimize interactions between Majorana modes in finite-size systems as required for Majorana-based storage and processing of quantum information.

cond-mat.supr-con↗

arXiv2021

Evidence of topological Shiba bands in artificial spin chains on superconductors

A major challenge in developing topological superconductors for implementing topological quantum computing is their characterization and control. It has been proposed that a p-wave gapped topological superconductor can be fabricated with single-atom precision by assembling chains of magnetic atoms on s-wave superconductors with spin-orbit coupling. Here, we analyze the Bogoliubov quasiparticle interference in atom-by-atom constructed Mn chains on Nb(110) and for the first time reveal the formation of multi-orbital Shiba bands using momentum resolved measurements. We find evidence that one band features a topologically non-trivial p-wave gap as inferred from its shape and particle-hole asymmetric intensity. Our work is an important step towards a distinct experimental determination of topological phases in multi-orbital systems by bulk electron band structure properties only.

cond-mat.supr-con↗

arXiv2020

Spin-orbit coupling induced splitting of Yu-Shiba-Rusinov states in antiferromagnetic dimers

Magnetic atoms coupled to the Cooper pairs of a superconductor induce Yu-Shiba-Rusinov states (in short Shiba states). In the presence of sufficiently strong spin-orbit coupling, the bands formed by hybridization of the Shiba states in ensembles of such atoms can support low-dimensional topological superconductivity with Majorana bound states localized on the ensembles' edges. Yet, the role of spin-orbit coupling for the hybridization of Shiba states in dimers of magnetic atoms, the building blocks for such systems, is largely unexplored. Here, we reveal the evolution of hybridized multi-orbital Shiba states from a single Mn adatom to artificially constructed ferromagnetically and antiferromagnetically coupled Mn dimers placed on a Nb(110) surface. Upon dimer formation, the atomic Shiba orbitals split for both types of magnetic alignment. Our theoretical calculations attribute the unexpected splitting in antiferromagnetic dimers to spin-orbit coupling and broken inversion symmetry at the surface. Our observations point out the relevance of previously unconsidered factors on the formation of Shiba bands and their topological classification.

cond-mat.supr-con↗

arXiv2020

Atomic-scale spin-polarization maps using functionalized superconducting probes

A scanning tunneling microscope (STM) with a magnetic tip that has a sufficiently strong spin-polarization can be used to map the sample's spin structure down to the atomic scale but usually lacks the possibility to absolutely determine the value of the sample's spin-polarization. Magnetic impurities in superconducting materials give rise to pairs of perfectly, i.e. 100% spin-polarized sub-gap resonances. In this work, we functionalize the apex of a superconducting Nb STM-tip with such impurity states by attaching Fe atoms to probe the spin-polarization of atom-manipulated Mn nanomagnets on a Nb(110) surface. By comparison with spin-polarized STM measurements of the same nanomagnets using Cr bulk tips we demonstrate an extraordinary spin-sensitivity and the possibility to measure the sample's spin-polarization values quantitatively with our new functionalized probes.

cond-mat.supr-con↗

arXiv2020

Function follows form: From semiconducting to metallic towards superconducting PbS nanowires by faceting the crystal

In the realm of colloidal nanostructures, with its immense capacity for shape and dimensionality control, the form is undoubtedly a driving factor for the tunability of optical and electrical properties in semiconducting or metallic materials. However, influencing the fundamental properties is still challenging and requires sophisticated surface or dimensionality manipulation. In this work, we present such a modification for the example of colloidal lead sulphide nanowires. We show that the electrical properties of lead sulphide nanostructures can be altered from semiconducting to metallic with indications of superconductivity, by exploiting the flexibility of the colloidal synthesis to sculpt the crystal and to form different surface facets. A particular morphology of lead sulphide nanowires has been synthesized through the formation of {111} surface facets, which shows metallic and superconducting properties in contrast to other forms of this semiconducting crystal, which contain other surface facets ({100} and {110}). This effect, which has been investigated with several experimental and theoretical approaches, is attributed to the presence of lead rich {111} facets. The insights promote new strategies for tuning the properties of crystals as well as new applications for lead sulphide nanostructures.

cond-mat.mtrl-sci↗

arXiv2020

Anisotropic circular photogalvanic effect in colloidal tin sulfide nanosheets

Tin sulfide promises very interesting properties such as a high optical absorption coefficient and a small band gap, while being less toxic compared to other metal chalcogenides. However, the limitations in growing atomically thin structures of tin sulfide hinder the experimental realization of these properties. Due to the flexibility of the colloidal synthesis, it is possible to synthesize very thin and at the same time large nanosheets. Electrical transport measurements show that these nanosheets can function as field-effect transistors with high on/off ratio and p-type behavior. The temperature dependency of the charge transport reveals that defects in the crystal are responsible for the formation of holes as majority carriers. During illumination with circularly polarized light, these crystals generate a helicity dependent photocurrent at zero-volt bias, since their symmetry is broken by asymmetric interfaces (substrate and vacuum). Further, the observed circular photogalvanic effect shows a pronounced in-plane anisotropy, with a higher photocurrent along the armchair direction, originating from the higher absorption coefficient in this direction. Our new insights show the potential of tin sulfide for new functionalities in electronics and optoelectronics, for instance as polarization sensors.

cond-mat.mtrl-sci↗