arXiv ScienceSearch

arXiv subjects

Peter Wolf

Publications and source records attributed to Peter Wolf.

At least 19 recordsLinked to original sources

MuyBridge: Mobile Human Center-of-Mass Estimation from Monocular Video via Sparse Fusion

The 3D center of mass (CoM) is a primary quantity in the biomechanical analysis of sport, rehabilitation, and clinical movement, yet existing 3D pose tracking, mesh recovery, and multi-view triangulation methods either optimize 3D keypoint accuracy without anatomical constraints or carry compute and capture infrastructure too heavy to deploy where CoM tracking is most useful. As a result, the metric CoM remains difficult for coaches and movement analysts to measure from a single camera where athletes train and compete. In this work, we introduce MuyBridge, an on-device system that estimates the athlete's segmental center of mass trajectory from a single phone camera video stream. MuyBridge couples a compact 2D pose network and a distilled single-step monocular depth network through an analytic metric fusion that uses anatomical and physical priors to anchor the metric CoM, requiring no 3D or task-specific supervision. Evaluated on the athletic movements of AthletePose3D (running, track and field, and figure skating), MuyBridge achieves 33-41 mm vertical CoM error and 2.3-6.6% absolute-relative range error (AbsRel) under a one-time calibration, and produces CoM estimates at the 63 FPS pose-estimation rate using asynchronous 2.86 Hz depth updates on iPhone 15. Code is available at: https://github.com/Abradshaw1/Muybridge

cs.CV

Discriminating scalar ultralight dark matter from quasi-monochromatic gravitational waves in LISA

A scalar ultralight dark matter (ULDM) candidate would induce oscillatory motion of freely falling test masses via its coupling to Standard Model fields. Such oscillations would create an observable Doppler shift of light exchanged between the test masses, and in particular would be visible in space-based gravitational waves (GW) detectors, such as LISA. While this kind of detection has been proposed multiple times in the recent years, we numerically investigate if it is possible to extract a scalar ULDM signal in a space-based GW detector, and in particular how to differentiate such a signal from a GW signal. Using one year of realistic orbits for the LISA spacecrafts and Bayesian methods, we find that LISA will indeed be able to discriminate between the two signals.

gr-qc

Design and benchmarking of a two degree of freedom tendon driver unit for cable-driven wearable technologies

Exosuits have recently been developed as alternatives to rigid exoskeletons and are increasingly adopted for both upper and lower limb therapy and assistance in clinical and home environments. Many cable-driven exosuits have been developed but little has been published on their electromechanical designs and performance. Therefore, this paper presents a comprehensive design and performance analysis of a two degree of freedom tendon driver unit (TDU) for cable-driven wearable exosuits. Detailed methodologies are presented to benchmark the functionality of the TDU. A static torque output test compares the commanded and measured torques. A velocity control test evaluates the attenuation and phase shift across velocities. A noise test evaluates how loud the TDU is for the wearer under different speeds. A thermal stress test captures the cooling performance of the TDU to ensure safe operation at higher loads. Finally, a battery endurance test evaluates the runtime of the TDU under various loading conditions to inform the usable time. To demonstrate these tests, a modular TDU system for cable-driven applications is introduced, which allows components such as motors, pulleys, and sensors to be adapted based on the requirements of the intended application. By sharing detailed methodologies and performance results, this study aims to provide a TDU design that may be leveraged by others and resources for researchers and engineers to better document the capabilities of their TDU designs.

eess.SY

Search for QCD coupled axion dark matter with the MICROSCOPE space experiment

Axion dark matter coupled via QCD induces a non-zero differential acceleration between test masses of different composition. Tests of the equivalence principle, like the recent MICROSCOPE space mission, are sensitive to such a signal. We use the final released data of the MICROSCOPE experiment, to search for this effect. We find no positive signal consistent with the dark matter model, and set upper limits on the axion-gluon coupling that improve existing laboratory bounds by up to two orders of magnitude for axion masses in the $10^{-17}$ eV to $10^{-13}$ eV range.

hep-ph

Towards sustainable space research in France

During the 2024's quinquennial scientific roadmap of CNES, a specific group worked on setting recommendations to decrease the environmental footprint of space science activities. This correspondence to Nature Astronomy highlights the efforts of the french space research to move towards sustainability. It relies on two complementary methods: decarbonisation and frugality.

astro-ph.IM

Optimal design of interpolation methods for time-delay interferometry

Time-delay interferometry (TDI) suppresses laser frequency noise by forming linear combinations of time-shifted interferometric measurements. The time-shift operation is implemented by interpolating discretely sampled data. To enable in-band laser noise reduction by eight to nine orders of magnitude, interpolation has to be performed with high accuracy. Optimizing the design of those interpolation methods is the focus of this work. Previous research that studied constant time-shifts suggested Lagrange interpolation as the interpolation method for TDI. Its transfer function performs well at low frequency but requires a high number of coefficients. Furthermore, when applied in TDI we observed prominent time-domain features when a time-varying shift scanned over a pure integer sample shift. To limit this effect we identify an additional requirement for the interpolation kernel: when considering time-varying shifts the interpolation kernel must be sufficiently smooth to avoid unwanted time-domain transitions that produce glitch-like features in power spectral density estimates. The Lagrange interpolation kernel exhibits a discontinuous first derivative by construction, which is insufficient for the application to LISA or other space-based GW observatories. As a solution we propose a novel design method for interpolation kernels that respect a predefined requirement on in-band interpolation residuals and that possess continuous derivatives up to a prescribed order. Using this method we show that an interpolation kernel with 22 coefficients is sufficient to respect LISA's picometre-requirement and to allow for a continuous first derivative which suppresses the magnitude of the time-domain transition adequately. The reduction from 42 (Lagrange interpolation) to 22 coefficients enables us to save computational cost and increases robustness against artefacts in the data.

astro-ph.IM

Probing the axion-photon coupling with space-based gravitational waves detectors

We propose a simple modification of space-based gravitational wave (GW) detector optical benches which would enable the measurement of vacuum birefringence of light induced by axion dark matterthrough its coupling to electromagnetism. Specifically, we propose to change a half-wave plate by a circular polarizer. While marginally affecting the sensitivity to GW by a factor $\sqrt{2}$, we show that such an adjustment would make future detectors such as LISA, TianQin, Taiji and Big-Bang Observer the most sensitive experiments at low axion masses

hep-ph

Sensorless model-based tension control for a cable-driven exosuit

Cable-driven exosuits have the potential to support individuals with motor disabilities across the continuum of care. When supporting a limb with a cable, force sensors are often used to measure tension. However, force sensors add cost, complexity, and distal components. This paper presents a design and control approach to remove the force sensor from an upper limb cable-driven exosuit. A mechanical design for the exosuit was developed to maximize passive transparency. Then, a data-driven friction identification was conducted on a mannequin test bench to design a model-based tension controller. Seventeen healthy participants raised and lowered their right arms to evaluate tension tracking, movement quality, and muscular effort. Questionnaires on discomfort, physical exertion, and fatigue were collected. The proposed strategy allowed tracking the desired assistive torque with an RMSE of 0.71 Nm (18%) at 50% gravity support. During the raising phase, the EMG signals of the anterior deltoid, trapezius, and pectoralis major were reduced on average compared to the no-suit condition by 30%, 38%, and 38%, respectively. The posterior deltoid activity was increased by 32% during lowering. Position tracking was not significantly altered, whereas movement smoothness significantly decreased. This work demonstrates the feasibility and effectiveness of removing the force sensor from a cable-driven exosuit. A significant increase in discomfort in the lower neck and right shoulder indicated that the ergonomics of the suit could be improved. Overall this work paves the way towards simpler and more affordable exosuits.

cs.RO

Improved modelling for dark photon detection with dish antennas

A vector dark matter candidate, also known as dark photon, would induce an oscillating electric field through kinetic mixing. One detection strategy uses a spherical reflector to focus the induced emission at its center of curvature. On one hand, we investigate the effects of diffraction in this type of experiment from an analytical standpoint, making use of the Kirchhoff integral theorem in the low-curvature dish limit. On the other hand, we estimate the impact of mode-matching, in the case of detection by a pyramidal horn antenna. We show that the expected signal intensity can be significantly reduced compared to usual estimates. Our method is applied to the re-interpretation of the SHUKET experiment data, the results of which are shown to be degraded by a factor of $\sim$~50 due to both diffraction and mode-matching. The analytical method allows optimizing some experimental parameters to gain sensitivity in future runs. Our results can be applied to any dish antenna experiment using a low curvature reflector.

hep-ex

Violation of the equivalence principle induced by oscillating rest mass and transition frequency, and its detection in atom interferometers

We present a theoretical investigation of the expected experimental signals produced by freely falling atoms with time oscillating mass and transition frequency. These oscillations could be produced in a variety of models, in particular, models of scalar dark matter (DM) non universally coupled to the standard matter (SM) such as axion-like particles (ALP) and dilatons. Performing complete and rigorous calculations, we show that, on one hand, two different atomic species would accelerate at a different rate, and on the other hand, they would produce a non-zero differential phase shift in atom interferometers (AI). The former would produce observable signals in equivalence principle tests like the recent MICROSCOPE mission, and we provide a corresponding sensitivity estimate, showing that MICROSCOPE can reach beyond the best existing searches in the ALP case. We also compare the expected sensitivity of two future AI experiments, namely the AION-10 gradiometer and an isotope differential AI considered for MAGIS-100, that we will refer to as SPID. We show that the SPID setup would be more sensitive to these dark matter fields compared to the gradiometer one, assuming equivalent experimental parameters.

hep-ph

Free space optical link to a tethered balloon for frequency transfer

We present the results of an optical link to a corner cube on board a tethered balloon at 300 m altitude including a Tip/Tilt compensation for the balloon tracking. Our experiment measures the carrier phase of a 1542 nm laser, which is the useful signal for frequency comparison of distant clocks. An active phase noise compensation of the carrier is implemented, demonstrating a fractional frequency stability of 8x10-19 after 16 s averaging, which slightly (factor ~3) improves on best previous links via an airborne platform. This state-of-the-art result is obtained with a transportable set-up that enables a fast field deployment.

physics.ins-det

Platform and environment requirements of a satellite quantum test of the Weak Equivalence Principle at the $10^{-17}$ level

The Space Time Explorer and QUantum Equivalence principle Space Test (STE-QUEST) recently proposed, aims at performing a precision test of the weak equivalence principle (WEP), a fundamental cornerstone of General Relativity. Taking advantage of the ideal operation conditions for high-precision quantum sensing on board of a satellite, it aims to detect possible violations of WEP down to the $10^{-17}$ level. This level of performance leads to stringent environmental requirements on the control of the spacecraft. We assume an operation of a dual-species atom interferometer of rubidium and potassium isotopes in a double-diffraction configuration and derive the constraints to achieve an E\"otv\"os parameter $\eta=10^{-17}$ in statistical and systematic uncertainties. We show that technical heritage of previous satellite missions, such as MICROSCOPE, satisfies the platform requirements to achieve the proposed objectives underlying the technical readiness of the STE-QUEST mission proposal.

physics.space-ph

Search for vector dark matter in microwave cavities with Rydberg atoms

We propose a novel experiment to search for dark matter, based on the application of an electric field inside a microwave cavity and electrometry using Rydberg atoms. We show that this kind of experiment could be extremely useful for detecting specific dark matter candidates, namely massive vector fields coupled to the photon field, more commonly known as dark photons. Such a massive vector field is a good candidate for dark matter. Using realistic experimental parameters we show that such an experiment could improve the current constraint on the coupling constant of the dark photons to Standard Model photons in the 1~$\mu$eV to 10~$\mu$eV mass range, with the possibility of tuning the maximum sensitivity via the cavity size. The main limiting factors on the sensitivity of the experiment are the amplitude stability of the applied field and the measurement uncertainty of the electric field by the atoms.

physics.atom-ph

End-to-end simulation and analysis pipeline for LISA

The data produced by the future space-based millihertz gravitational-wave detector LISA will require nontrivial pre-processing, which might affect the science results. It is crucial to demonstrate the feasibility of such processing algorithms and assess their performance and impact on the science. We are building an end-to-end pipeline that includes state-of-the-art simulations and noise reduction algorithms. The simulations must include a detailed model of the full measurement chain, capturing the main features that affect the instrument performance and processing algorithms. In particular, we include in these simulations, for the first time, proper relativistic treatment of reference frames with realistic numerically-optimized orbits; a model for onboard clocks and clock synchronization measurements; proper modeling of total laser frequencies, including laser locking, frequency planning and Doppler shifts; and a better treatment of onboard processing. Using these simulated data, we show that our pipeline is able to reduce the most critical noises and form synchronized observables. By injecting signals from a verification binary, we demonstrate that good parameter estimation can be obtained on this more realistic setup, extending existing results from previous LISA Data Challenges.

astro-ph.IM

STE-QUEST -- Space Time Explorer and QUantum Equivalence principle Space Test: The 2022 medium-class mission concept

Space-borne quantum technologies, particularly those based on atom interferometry, are heralding a new era of strategic and robust space exploration. The unique conditions of space, characterized by low noise and low gravity environments, open up diverse possibilities for applications ranging from precise time and frequency transfer to Earth Observation and the search of new Physics. In this paper, we summarise the M-class mission proposal in response to the 2022 call in ESA's science program: Space-Time Explorer and Quantum Equivalence Principle Space Test (STE-QUEST). It consists in a satellite mission featuring a dual-species atom interferometer operating over extended durations. This mission aims to tackle three of the most fundamental questions in Physics: (i) testing the universality of free fall with an accuracy better than one part in $10^{-17}$, (ii) exploring various forms of Ultra-Light Dark Matter, and (iii) scrutinizing the foundations of Quantum Mechanics.

physics.space-ph

Time delay interferometry without clock synchronisation

Time-delay interferometry (TDI) is a data processing technique for LISA designed to suppress the otherwise overwhelming laser noise by several orders of magnitude. It is widely believed that TDI can only be applied once all phase or frequency measurements from each spacecraft have been synchronized to a common time frame. We demonstrate analytically, using as an example the commonly-used Michelson combination X, that TDI can be computed using the raw, unsynchronized data, thereby avoiding the need for an initial synchronization processing step and significantly simplifying the initial noise reduction pipeline. Furthermore, the raw data is free of any potential artifacts introduced by clock synchronization and reference frame transformation algorithms, which allows to operate directly on the MHz beatnotes. As a consequence, in-band clock noise is directly suppressed as part of TDI, in contrast to the approach previously proposed in the literature (in which large trends in the beatnotes are removed before the main laser-noise reduction step, and clock noise is suppressed in an extra processing step). We validate our algorithm with full-scale numerical simulations that use LISA Instrument and PyTDI and show that we reach the same performance levels as the previously proposed methods, ultimately limited by the clock sideband stability.

gr-qc

Soft robotic suits: State of the art, core technologies and open challenges

Wearable robots are undergoing a disruptive transition, from the rigid machines that populated the science-fiction world in the early eighties to lightweight robotic apparel, hardly distinguishable from our daily clothes. In less than a decade of development, soft robotic suits have achieved important results in human motor assistance and augmentation. In this paper, we start by giving a definition of soft robotic suits and proposing a taxonomy to classify existing systems. We then critically review the modes of actuation, the physical human-robot interface and the intention-detection strategies of state of the art soft robotic suits, highlighting the advantages and limitations of different approaches. Finally, we discuss the impact of this new technology on human movements, for both augmenting human function and supporting motor impairments, and identify areas that are in need of further development.

cs.RO

Point-to-Point Stabilised Optical Frequency Transfer with Active Optics

Timescale comparison between optical atomic clocks over ground-to-space and terrestrial free-space laser links will have enormous benefits for fundamental and applied science, from measurements of fundamental constants and searches for dark matter, to geophysics and environmental monitoring. However, turbulence in the atmosphere creates phase noise on the laser signal, greatly degrading the precision of the measurements, and also induces scintillation and beam wander which cause periodic deep fades and loss of signal. We demonstrate phase stabilized optical frequency transfer over a 265 m horizontal point-to-point free-space link between optical terminals with active tip-tilt mirrors to suppress beam wander, in a compact, human-portable set-up. A phase stabilized 715 m underground optical fiber link between the two terminals is used to measure the performance of the free-space link. The active optics terminals enabled continuous, coherent transmission over periods of up to an hour. We achieve an 80 dB suppression of atmospheric phase noise to $3\times10^{-6}$ rad$^{2}$Hz$^{-1}$ at 1 Hz, and an ultimate fractional frequency stability of $1.6\times10^{-19}$ after 40 s of integration. At high frequency this performance is limited by the residual atmospheric noise after compensation and the frequency noise of the laser seen through the unequal delays of the free space and fiber links. Our long term stability is limited by the thermal shielding of the phase stabilization system. We achieve residual instabilities below those of the best optical atomic clocks, ensuring clock-limited frequency comparison over turbulent free-space links.

physics.ins-det