arXiv subjects

Peter Pak

Publications and source records attributed to Peter Pak.

9 recordsLinked to original sources

arXiv2026

AI Agentic Selective Laser Sintering Process Optimization

Agentic systems enable the intelligent automation of complex workflows, specific to additive manufacturing this is applicable for complex tasks such as process parameter optimization for mechanical properties. This work investigates the AI enabled agentic process optimization within Selective Laser Sintering (SLS) to iteratively improve the tensile and flexural properties of 3 different materials on the Inova Mk1. These materials include PA12 GF, PA11 Onyx, and PA12 Blend (volume mixture of 25% PA12 GF and 75% PA12 White) and with using knowledge from previous builds and minimal guidance from the user, the agentic system was able to optimize process parameters over a small number of iterations to achieve comparable TDS specified mechanical properties. This work showcases the ability for an agentic system to continually learn from updated data, enabling the intelligent automation of complex tasks such as process parameter optimization for selective laser sintering.

cs.MA↗

arXiv2026

AgentsCAD: Automated Design for Manufacturing of FDM Parts via Multi-Agent LLM Reasoning and Geometric Feature Recognition

Parts manufactured with Fused Deposition Modeling (FDM) often require Design for Additive Manufacturing (DFAM) modifications to ensure printability, structural integrity, and reduced post-processing. Current slicers identify defects such as steep overhangs but are unable to modify the underlying geometry. This work presents AgentsCAD, a multi-agent system that bridges raw boundary-representation (B-Rep) geometry and Large Language Model (LLM) reasoning to automate targeted DFM. The workflow begins by parsing a STEP file. The agentic system detects overhangs above a 45{\deg}threshold, constructs a face-adjacency topology graph, and optionally injects semantic feature labels from a GraphSAGE model trained on MFCAD++ (59,665 parts), before dispatching a Claude Sonnet design-reasoning agent that recommends reorientations, fillets, chamfers, and similar modifications. A GPT-4o vision-language verifier inspects rendered views to confirm geometric integrity. Outputs include a modified STEP file and a human-readable report. A test case on a birdhouse model demonstrates that the system correctly diagnoses overhangs, selects appropriate defect mitigation strategies, and proposes physically valid corrections, partially solving the geometry-to-language translation problem central to LLM-driven CAD modification.

cs.MA↗

arXiv2026

RocketSmith: Agentic Additive Manufacturing of High-Powered Rockets

RocketSmith is an agentic system which intelligently automates the DFAM process for the development of high powered rockets suitable for launch. The system utilizes a large language model to orchestrate the execution of software tools to validate design characteristics such as flight stability and generate the parametric design components for the rocket assembly. A collection of subagents and skills enable optimization workflows of flight parameters via iteration in both zero-shot and human-in-the-loop workflows. With this system, four distinct high power rockets with various motor and assembly configurations were developed utilizing the unique design capabilities of additive manufacturing. These assembly components were fabricated using various FDM printers, manually evaluated for flight readiness, and flight tested at a launch event. From these tests, all rockets achieved a stable launch and two of the four rockets were successfully recovered in reflyable condition. The altimeter data validated that the rockets achieved an altitude 80% of the expected apogee predicted by the agentic system, establishing consistency between simulation and experimentation.

cs.RO↗

arXiv2026

Domain Adapted Large Language Models for Additive Manufacturing

This work presents a collection of multi-modal domain adapted large language models built upon the instruction tuned variants of open weight models (Gemma 3, Qwen 3, Gemma 4) using a relatively small dataset of around 50 million tokens. The dataset consists of open-access additive manufacturing journal articles with data extracted for the domain adaptive pretraining and visual instruction tuning processes. Various stages of the developed model are evaluated with the Additive-Manufacturing-Benchmark which consists of additive manufacturing domain specific tasks compiled published resources. Domain adapted and instruction tuned models exhibit proficiency in both language and vision based tasks, achieving accuracies upwards of 90% in general additive manufacturing knowledge. This domain adaptive pretraining and instruction tuning strategy outline an accessible specialization method for large language models to a domain such as additive manufacturing.

cs.LG↗

arXiv2025

Image2Gcode: Image-to-G-code Generation for Additive Manufacturing Using Diffusion-Transformer Model

Mechanical design and manufacturing workflows conventionally begin with conceptual design, followed by the creation of a computer-aided design (CAD) model and fabrication through material-extrusion (MEX) printing. This process requires converting CAD geometry into machine-readable G-code through slicing and path planning. While each step is well established, dependence on CAD modeling remains a major bottleneck: constructing object-specific 3D geometry is slow and poorly suited to rapid prototyping. Even minor design variations typically necessitate manual updates in CAD software, making iteration time-consuming and difficult to scale. To address this limitation, we introduce Image2Gcode, an end-to-end data-driven framework that bypasses the CAD stage and generates printer-ready G-code directly from images and part drawings. Instead of relying on an explicit 3D model, a hand-drawn or captured 2D image serves as the sole input. The framework first extracts slice-wise structural cues from the image and then employs a denoising diffusion probabilistic model (DDPM) over G-code sequences. Through iterative denoising, the model transforms Gaussian noise into executable print-move trajectories with corresponding extrusion parameters, establishing a direct mapping from visual input to native toolpaths. By producing structured G-code directly from 2D imagery, Image2Gcode eliminates the need for CAD or STL intermediates, lowering the entry barrier for additive manufacturing and accelerating the design-to-fabrication cycle. This approach supports on-demand prototyping from simple sketches or visual references and integrates with upstream 2D-to-3D reconstruction modules to enable an automated pipeline from concept to physical artifact. The result is a flexible, computationally efficient framework that advances accessibility in design iteration, repair workflows, and distributed manufacturing.

cs.LG↗

arXiv2025

Agentic Additive Manufacturing Alloy Evaluation

Agentic systems enable the intelligent use of research tooling, augmenting a researcher's ability to investigate and propose novel solutions to existing problems. Within Additive Manufacturing (AM), alloy selection and evaluation remains a complex challenge, often requiring expertise in the various domains of materials science, thermodynamic simulations, and experimental analysis. Large Language Model (LLM) enabled agents can facilitate this endeavor by utilizing their extensive knowledge base to dispatch tool calls via Model Context Protocol (MCP) to perform actions such as thermophysical property diagram calculations and lack of fusion process map generation. In addition, the multi-agent system can effectively reason through complex user prompts and provide analysis on the lack of fusion process window of common alloys such as SS316L and IN718 along with proposed composition variants of known alloys. These agents can dynamically adjust their task trajectory to the outcomes of tool call results, effectively enabling autonomous decision-making in practical environments. This work aims to showcase the benefits of adopting a LLM enabled multi-agent system to automate and accelerate the task of evaluating proposed additive manufacturing alloys, both novel and known.

cs.AI↗

arXiv2025

AdditiveLLM: Large Language Models Predict Defects in Additive Manufacturing

In this work we investigate the ability of large language models to predict additive manufacturing defect regimes given a set of process parameter inputs. For this task we utilize a process parameter defect dataset to fine-tune a collection of models, titled AdditiveLLM, for the purpose of predicting potential defect regimes including Keyholing, Lack of Fusion, and Balling. We compare different methods of input formatting in order to gauge the model's performance to correctly predict defect regimes on our sparse Baseline dataset and our natural language Prompt dataset. The model displays robust predictive capability, achieving an accuracy of 93\% when asked to provide the defect regimes associated with a set of process parameters. The incorporation of natural language input further simplifies the task of process parameters selection, enabling users to identify optimal settings specific to their build.

cs.LG↗

arXiv2024

LLM-3D Print: Large Language Models To Monitor and Control 3D Printing

Industry 4.0 has revolutionized manufacturing by driving digitalization and shifting the paradigm toward additive manufacturing (AM). Fused Deposition Modeling (FDM), a key AM technology, enables the creation of highly customized, cost-effective products with minimal material waste through layer-by-layer extrusion, posing a significant challenge to traditional subtractive methods. However, the susceptibility of material extrusion techniques to errors often requires expert intervention to detect and mitigate defects that can severely compromise product quality. While automated error detection and machine learning models exist, their generalizability across diverse 3D printer setups, firmware, and sensors is limited, and deep learning methods require extensive labeled datasets, hindering scalability and adaptability. To address these challenges, we present a process monitoring and control framework that leverages pre-trained Large Language Models (LLMs) alongside 3D printers to detect and address printing defects. The LLM evaluates print quality by analyzing images captured after each layer or print segment, identifying failure modes and querying the printer for relevant parameters. It then generates and executes a corrective action plan. We validated the effectiveness of the proposed framework in identifying defects by comparing it against a control group of engineers with diverse AM expertise. Our evaluation demonstrated that LLM-based agents not only accurately identify common 3D printing errors, such as inconsistent extrusion, stringing, warping, and layer adhesion, but also effectively determine the parameters causing these failures and autonomously correct them without any need for human intervention.

cs.CL↗

arXiv2024

BeadSight: An Inexpensive Tactile Sensor Using Hydro-Gel Beads

In robotic manipulation, tactile sensors are indispensable, especially when dealing with soft objects, objects of varying dimensions, or those out of the robot's direct line of sight. Traditional tactile sensors often grapple with challenges related to cost and durability. To address these issues, our study introduces a novel approach to visuo-tactile sensing with an emphasis on economy and replacablity. Our proposed sensor, BeadSight, uses hydro-gel beads encased in a vinyl bag as an economical, easily replaceable sensing medium. When the sensor makes contact with a surface, the deformation of the hydrogel beads is observed using a rear camera. This observation is then passed through a U-net Neural Network to predict the forces acting on the surface of the bead bag, in the form of a pressure map. Our results show that the sensor can accurately predict these pressure maps, detecting the location and magnitude of forces applied to the surface. These abilities make BeadSight an effective, inexpensive, and easily replaceable tactile sensor, ideal for many robotics applications.

cs.RO↗