arXiv subjects

Peng Yu

Publications and source records attributed to Peng Yu.

At least 91 records · Page 5Linked to original sources

arXiv2022

Subcritical insability of viscoelastic flow over a circular cylinder: A numerical study

In this paper, we discuss whether the instability of viscoelastic flow around a circular cylinder is subcritical or supercritical by numerical simulation. The Oldroyd-B model is selected to describe the viscoelastic constitutive relationship. The Log-conformation reformulation is employed to stabilize numerical simulation. The parameter ranges investigated are the Reynolds numbers ($Re$) spanning from 5 to 100 and the Weissenberg number ($Wi$) spanning from 0 to 10, with a fixed viscosity ratio of $β= 0.9$. Simulations are performed under two paths, i.e., 1) increasing $Re$ (or $Wi$) and 2) decreasing $Re$ (or $Wi$) slowly and gradually from one state to the next. The results show that the statistical solutions such as the time-averaged velocity obtained along the two paths are not identical over certain parameter range, which is around the transition point from the steady to unsteady flow. This loading path dependence behaviour indicates that the flow instability is subcritical.

physics.flu-dyn↗

arXiv2022

Shear-induced droplet mobility within porous surfaces

Droplet mobility under shear flows is important in a wide range of engineering applications, e.g., fog collection, and self-cleaning surfaces. For structured surfaces to achieve superhydrophobicity, the removal of stains adhered within the microscale surface features strongly determines the functional performance and durability. In this study, we numerically investigate the shear-induced mobility of the droplet trapped within porous surfaces. Through simulations covering a wide range of flow conditions and porous geometries, three droplet mobility modes are identified, i.e., the stick-slip, crossover, and slugging modes. To quantitatively characterise the droplet dynamics, we propose a droplet-scale capillary number that considers the driving force and capillary resistance. By comparing against the simulation results, the proposed dimensionless number presents a strong correlation with the leftover volume. The dominating mechanisms revealed in this study provide a basis for further research on enhancing surface cleaning and optimising design of anti-fouling surfaces.

physics.flu-dyn↗

arXiv2022

The reconstructed thermal lattice Boltzmann flux solver and its applications for simulations of thermal flows

The thermal lattice Boltzmann flux solver (TLBFS) has been proposed to overcome the drawbacks of the thermal lattice Boltzmann models. However, as a weakly compressible model, its mechanism of good numerical stability for high Rayleigh number thermal flows is still unclear. To reveal the mechanism, the present paper firstly derives the macroscopic equations of TLBFS (MEs-TLBFS) with actual numerical dissipation terms by approximating its computational process. By solving MEs-TLBFS with the finite volume method, the reconstructed TLBFS (RTLBFS) is proposed. Detailed analyses prove that these actual numerical dissipation terms are the mechanism of the good numerical stability of TLBFS for high Rayleigh number thermal flows. More detailed numerical tests indicate RTLBFS has similar performances as TLBFS for stability, accuracy, and efficiency. Moreover, the present RTLBFS shows a clear mechanism to achieve good numerical stability for high Rayleigh number flows.

physics.flu-dyn↗

arXiv2022

Direct Light Orbital Angular Momentum Detection in Mid-Infrared based on Type-II Weyl Semimetal TaIrTe4

The capability of direct photocurrent detection of orbital angular momentum (OAM) of light has recently been realized with topological Weyl semimetal, but limited to near infrared wavelength range. The extension of direct OAM detection to midinfrared, a wavelength range that plays important role in a vast range of applications, such as autonomous driving, night vision and motion detection, is challenging and has not yet been realized. This is because most studies of photocurrent responses are not sensitive to the phase information and the photo response is usually very poor in the mid-infrared. In this study, we designed a photodetector based on Type-II Weyl semimetal tantalum iridium tellurides with designed electrode geometries for direct detection of the topological charge of OAM through orbital photogalvanic effect. Our results indicate helical phase gradient of light can be distinguished by a current winding around the optical beam axis with a magnitude proportional to its quantized OAM mode number. The topological enhanced response at mid-infrared of TaIrTe4 further help overcome the low responsivity issues and finally render the direct orbital angular momentum detection capability in mid-infrared. Our study enables on-chip integrated OAM detection, and thus OAM sensitive focal plane arrays in mid-infrared. Such capability triggers new route to explore applications of light carrying OAM, especially that it can crucially promote the performance of many mid-infrared imaging related applications, such as intricate target recognition and night vision.

physics.optics↗

arXiv2021

Electrically Switchable van der Waals Magnon Valves

Van der Waals magnets have emerged as a fertile ground for the exploration of highly tunable spin physics and spin-related technology. Two-dimensional (2D) magnons in van der Waals magnets are collective excitation of spins under strong confinement. Although considerable progress has been made in understanding 2D magnons, a crucial magnon device called the van der Waals magnon valve, in which the magnon signal can be completely and repeatedly turned on and off electrically, has yet to be realized. Here we demonstrate such magnon valves based on van der Waals antiferromagnetic insulator MnPS3. By applying DC electric current through the gate electrode, we show that the second harmonic thermal magnon (SHM) signal can be tuned from positive to negative. The guaranteed zero crossing during this tuning demonstrates a complete blocking of SHM transmission, arising from the nonlinear gate dependence of the non-equilibrium magnon density in the 2D spin channel. Using the switchable magnon valves we demonstrate a magnon-based inverter. These results illustrate the potential of van der Waals anti-ferromagnets for studying highly tunable spin-wave physics and for application in magnon-base circuitry in future information technology.

cond-mat.mtrl-sci↗

arXiv2021

Local Control of Supercurrent Density in Epitaxial Planar Josephson Junctions

The critical current response to an applied out-of-plane magnetic field in a Josephson junction provides insight into the uniformity of its current distribution. In Josephson junctions with semiconducting weak links, the carrier density and, therefore the overall current distribution could be modified electrostatically via metallic gates. Here, we show local control of the current distribution in an epitaxial Al-InAs Josephson junction equipped with five mini-gates. We demonstrate that not only can the junction width be electrostatically defined but also we can locally adjust the current profile to form superconducting quantum interference devices. Our studies show enhanced edge conduction in such long junctions, which can be eliminated by mini-gates to create a uniform current distribution.

cond-mat.mes-hall↗

arXiv2021

Marangoni Convection-Driven Laser Fountains and Waves on Free Surfaces of Liquids

It is well accepted that an outward Marangoni convection from a low surface tension region will make the surface depressed. Here, we report that this established perception is only valid for thin liquid films. Using surface laser heating, we show that in deep liquids a laser beam actually pulls up the fluid above the free surface generating fountains with different shapes. Whereas with decreasing liquid depth a transition from fountain to indentation with fountain in-indentation is observed. Further, high-speed imaging reveals a transient surface process before steady elevation is formed, and this dynamic deformation is subsequently utilized to resonantly excite giant surface waves by a modulated laser beam. Computational fluid dynamics models reveal the underlying flow patterns and quantify the depth-dependent and time-resolved surface deformations. Our discoveries and techniques have upended the century-old perception and opened up a new regime of interdisciplinary research and applications of Marangoni-induced interface phenomena and optocapillary fluidic surfaces-the control of fluids with light.

physics.flu-dyn↗

arXiv2020

Room temperature nonlinear Hall effect and wireless RF rectification in Weyl semimetal TaIrTe4

The nonlinear Hall effect (NLHE), which can produce a transverse voltage without any magnetic field, is a potential alternative for rectification or frequency doubling. However, the low temperature detection of NLHE limits its applications. Here, we report the room-temperature NLHE in a type-II Weyl semimetal TaIrTe4, which hosts a robust NLHE due to substantial broken inversion symmetry and large band overlapping at the Fermi level. We also observe a temperature-induced sign inversion of NLHE in TaIrTe4. Our theoretical calculations suggest that the observed sign inversion is a result of temperature-induced shift in the chemical potential indicating a direct correlation of NLHE with the electronic structure at the Fermi surface. Finally, the room-temperature NLHE in TaIrTe4 is exploited to demonstrate the wireless RF rectification with zero external bias and magnetic field. This work opens a door to realizing room temperature applications based on the NLHE in Weyl semimetals.

cond-mat.mtrl-sci↗

arXiv2020

Bayes Optimal Informer Sets for Early-Stage Drug Discovery

An important experimental design problem in early-stage drug discovery is how to prioritize available compounds for testing when very little is known about the target protein. Informer based ranking (IBR) methods address the prioritization problem when the compounds have provided bioactivity data on other potentially relevant targets. An IBR method selects an informer set of compounds, and then prioritizes the remaining compounds on the basis of new bioactivity experiments performed with the informer set on the target. We formalize the problem as a two-stage decision problem and introduce the Bayes Optimal Informer SEt (BOISE) method for its solution. BOISE leverages a flexible model of the initial bioactivity data, a relevant loss function, and effective computational schemes to resolve the two-step design problem. We evaluate BOISE and compare it to other IBR strategies in two retrospective studies, one on protein-kinase inhibition and the other on anti-cancer drug sensitivity. In both empirical settings BOISE exhibits better predictive performance than available methods. It also behaves well with missing data, where methods that use matrix completion show worse predictive performance. We provide an R implementation of BOISE at https://github.com/wiscstatman/esdd/BOISE

stat.ME↗

arXiv2019

Broadband mid-infrared perfect absorber using fractal Gosper curve

Designing broadband metamaterial perfect absorbers is challenging due to the intrinsically narrow bandwidth of surface plasmon resonances. Here, the paper reports an ultra-broadband metamaterial absorber by using space filling Gosper curve. The optimized result shows an average absorptivity of 95.78% from 2.64 to 9.79 μm across the entire mid-infrared region. Meanwhile, the absorber shows insensitivity to the polarization angle and the incident angle of the incident light. The underlying physical principles, used in our broadband absorber, involve a fractal geometry with multiple scales and a dissipative plasmonic crystal. The broadband perfect absorption can be attributed to multiple electric resonances at different wavelengths supported by a few segments in the defined Gosper curve.

physics.optics↗

arXiv2019

CM Values of Green Functions Associated to Special Cycles on Shimura Varieties with Applications to Siegel 3-Fold $X_2(2)$

We generalize the definition of CM cycles beyond the small and big CM ones studied by various authors and give a uniform formula for the CM values of Green functions associated to these special cycles in general using the idea of regularized theta lifts. Finally, as an application to Siegel 3-fold $X_2(2)$, we can compute special values of theta functions and Rosenhain $λ$-invariants at a CM cycle, which is useful for genus two curve cryptography.

math.NT↗

arXiv2019

On a scalable problem transformation method for multi-label learning

Binary relevance is a simple approach to solve multi-label learning problems where an independent binary classifier is built per each label. A common challenge with this in real-world applications is that the label space can be very large, making it difficult to use binary relevance to larger scale problems. In this paper, we propose a scalable alternative to this, via transforming the multi-label problem into a single binary classification. We experiment with a few variations of our method and show that our method achieves higher precision than binary relevance and faster execution times on a top-K recommender system task.

cs.IR↗

arXiv2019

Stacking-Dependent Interlayer Phonons in 3R and 2H MoS$_{2}$

We have investigated the interlayer shear and breathing phonon modes in MoS$_{2}$ with pure 3R and 2H stacking order by using polarization-dependent ultralow-frequency Raman spectroscopy. We observe up to three shear branches and four breathing branches in MoS$_{2}$ with thickness from 2 to 13 layers. The breathing modes show the same Raman activity behavior for both polytypes, but the 2H breathing frequencies are consistently several wavenumbers higher than the 3R breathing frequencies, signifying that 2H MoS$_{2}$ has slightly stronger interlayer lattice coupling than 3R MoS$_{2}$. In contrast, the shear-mode Raman spectra are strikingly different for 2H and 3R MoS$_{2}$. While the strongest shear mode corresponds to the highest-frequency branch in the 2H structure, it corresponds to the lowest-frequency branch in the 3R structure. Such distinct and complementary Raman spectra of the 3R and 2H polytypes allow us to survey a broad range of shear modes in MoS$_{2}$, from the highest to lowest branch. By combining the linear chain model, group theory, effective bond polarizability model and first-principles calculations, we can account for all the major observations in our experiment.

cond-mat.mes-hall↗

arXiv2019

Band Structure Engineering of Interfacial Semiconductors Based on Atomically Thin Lead Iodide Crystals

To explore new constituents in two-dimensional materials and to combine their best in van der Waals heterostructures, are in great demand as being unique platform to discover new physical phenomena and to design novel functionalities in interface-based devices. Herein, PbI2 crystals as thin as few-layers are first synthesized, particularly through a facile low-temperature solution approach with the crystals of large size, regular shape, different thicknesses and high-yields. As a prototypical demonstration of flexible band engineering of PbI2-based interfacial semiconductors, these PbI2 crystals are subsequently assembled with several transition metal dichalcogenide monolayers. The photoluminescence of MoS2 is strongly enhanced in MoS2/PbI2 stacks, while a dramatic photoluminescence quenching of WS2 and WSe2 is revealed in WS2/PbI2 and WSe2/PbI2 stacks. This is attributed to the effective heterojunction formation between PbI2 and these monolayers, but type I band alignment in MoS2/PbI2 stacks where fast-transferred charge carriers accumulate in MoS2 with high emission efficiency, and type II in WS2/PbI2 and WSe2/PbI2 stacks with separated electrons and holes suitable for light harvesting. Our results demonstrate that MoS2, WS2, WSe2 monolayers with very similar electronic structures themselves, show completely distinct light-matter interactions when interfacing with PbI2, providing unprecedent capabilities to engineer the device performance of two-dimensional heterostructures.

cond-mat.mes-hall↗

arXiv2018

The lambda invariants at CM points

In the paper, we show that $λ(z_1) -λ(z_2)$, $λ(z_1)$ and $1-λ(z_1)$ are all Borcherds products in $X(2) \times X(2)$. We then use the big CM value formula of Bruinier, Kudla, and Yang to give explicit factorization formulas for the norms of $λ(\frac{d+\sqrt d}2)$, $1-λ(\frac{d+\sqrt d}2)$, and $λ(\frac{d_1+\sqrt{d_1}}2) -λ(\frac{d_2+\sqrt{d_2}}2)$, with the latter under the condition $(d_1, d_2)=1$. Finally, we use these results to show that $λ(\frac{d+\sqrt d}2)$ is always an algebraic integer and can be easily used to construct units in the ray class field of $\mathbb{Q}(\sqrt{d})$ of modulus $2$. In the process, we also give explicit formulas for a whole family of local Whittaker functions, which are of independent interest.

math.NT↗

arXiv2018

Negative Log Likelihood Ratio Loss for Deep Neural Network Classification

In deep neural network, the cross-entropy loss function is commonly used for classification. Minimizing cross-entropy is equivalent to maximizing likelihood under assumptions of uniform feature and class distributions. It belongs to generative training criteria which does not directly discriminate correct class from competing classes. We propose a discriminative loss function with negative log likelihood ratio between correct and competing classes. It significantly outperforms the cross-entropy loss on the CIFAR-10 image classification task.

cs.LG↗

arXiv2018

Isogeometric analysis with local adaptivity based on a posterior error estimation for elastodynamics

This paper presents a novel methodology of local adaptivity for the frequency-domain analysis of the vibrations of Reissner-Mindlin plates. The adaptive discretization is based on the recently developed Geometry Independent Field approximaTion (GIFT) framework, which may be seen as a generalisation of the Iso-Geometric Analysis (IGA). Within the GIFT framework, we describe the geometry of the structure exactly with NURBS (Non-Uniform Rational B-Splines), whilst independently employing Polynomial splines over Hierarchical T-meshes (PHT)-splines to represent the solution field. The proposed strategy of local adaptivity, wherein a posteriori error estimators are computed based on inexpensive hierarchical $h-$refinement, aims to control the discretisation error within a frequency band. The approach sweeps from lower to higher frequencies, refining the mesh appropriately so that each of the free vibration mode within the targeted frequency band is sufficiently resolved. Through several numerical examples, we show that the GIFT framework is a powerful and versatile tool to perform local adaptivity in structural dynamics. We also show that the proposed adaptive local $h-$refinement scheme allows us to achieve significantly faster convergence rates than when using a uniform $h-$refinement.

math.NA↗

arXiv2018

Anisotropic Thermal Transport in Phase-Transition Layered 2D Alloys WSe2(1-x)Te2x

Transition metal dichalcogenide (TMD) alloys have attracted great interests in recent years due to their tunable electronic properties, especially the semiconductor-metal phase transition, along with their potential applications in solid-state memories and thermoelectrics. However, the thermal conductivity of layered two-dimensional (2D) TMD alloys remains largely unexplored despite that it plays a critical role in the reliability and functionality of TMD-enabled devices. In this work, we study the temperature-dependent anisotropic thermal conductivity of the phase-transition 2D TMD alloys WSe2(1-x)Te2x in both the in-plane direction (parallel to the basal planes) and the cross-plane direction (along the c-axis) using time-domain thermoreflectance measurements. In the WSe2(1-x)Te2x alloys, the cross-plane thermal conductivity is observed to be dependent on the heating frequency (modulation frequency of the pump laser) due to the non-equilibrium transport between different phonon modes. Using a two-channel heat conduction model, we extracted the anisotropic thermal conductivity at the equilibrium limit. A clear discontinuity in both the cross-plane and the in-plane thermal conductivity is observed as x increases from 0.4 to 0.6 due to the phase transition from the 2H to Td phase in the layered 2D alloys. The temperature dependence of thermal conductivity for the TMD alloys was found to become weaker compared with the pristine 2H WSe2 and Td WTe2 due to the atomic disorder. This work serves as an important starting point for exploring phonon transport in layered 2D alloys.

cond-mat.mtrl-sci↗