arXiv subjects

Peidong Yu

Publications and source records attributed to Peidong Yu.

8 recordsLinked to original sources

arXiv2026

Realistic Detector Geometry Modeling and Its Impact on Event Reconstruction in JUNO

JUNO is designed to determine the neutrino mass ordering with an energy resolution of 3% at 1 MeV. In the real detector, however, deformations of the central stainless-steel structure during installation lead to deviations of the photomultiplier tube (PMT) positions from their design values. Based on the limited survey data of the PMTs and the stainless-steel truss, we perform a correlation analysis of the measured points and propose a method to predict the positions of all PMTs. Using the resulting realistic geometry, we demonstrate that the detector deformation has a negligible effect on the energy reconstruction. In contrast, inaccuracies in the assumed geometry can introduce vertex biases of up to 40 mm. Incorporating the realistic geometry into the calibration-based PMT response model removes this bias and preserves the stability of the reconstruction algorithms.

physics.ins-det↗

arXiv2026

U-Net based particle localization in granular experiments: Accuracy limits and optimization

Identifying the positions of granular particles from experimental images is often complicated by their partial overlap in two dimensional projections. Uneven backgrounds and inhomogeneous illuminations can add to the challenge. Conventional image-processing methods are often unable to analyze such images. We show that a deep neural network with an U-Net architecture can provide precise particle positions with a high detection rate. For our challenging test image the network correctly identifies 97.7\% of the particles while only creating 2.7 \% of false positives. The training of the U-Net requires a number of target images where the position of all particles have been identified by humans. Those positions are then indicated in the target images by setting a small number of mask pixels to white in an otherwise black image. We demonstrate that the design of these masks critically determines performance: mask size controls the resolution of overlapping particles, anti-aliased masks enable subpixel accuracy, and systematic human labeling biases set a measurable lower bound on achievable precision. Our final network achieves an accuracy of the particle coordinate of 3.7\% of the particle diameter.

cond-mat.stat-mech↗

arXiv2025

Towards probing velocity distributions in dense granular matter: Utilizing Fiber Bragg Gratings

Granular gases are commonly characterized through their velocity distribution, which provides access to the granular temperature. In experiments, velocity distributions are typically obtained by particle tracking, which however becomes limited at moderate and high particle densities. As a way forward, we propose a new technique for measuring particle velocities in situ by using a Fiber Bragg Grating (FBG) sensor, which remains applicable at significantly higher particle densities.The FBG sensor detects strain pulses induced by particle-fiber collisions, from which the velocity of the impacting particle can be derived. Applying this method to an ensemble of granular particles allows to extract its velocity distributions as we present for a granular system excited by a vibrational shaker. We validate the extracted velocity distribution against conventional particle-tracking measurements, confirming the reliability of the FBG-based technique.

cond-mat.dis-nn↗

arXiv2025

Multi-threaded Simulation Software for the JUNO Experiment

The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose experiment under construction in southern China. JUNO aims to determine the neutrino mass ordering and precisely measure the neutrino oscillation parameters by detecting reactor neutrinos from nuclear power plants. In addition to reactor neutrinos, JUNO can study atmospheric neutrinos, solar neutrinos, geo-neutrinos, supernova burst neutrinos, the Diffuse Supernova Neutrino Background (DSNB), and nucleon decay, covering an energy range from keV to TeV. JUNO consists of a 20 kton liquid scintillator detector, equipped with 17,612 20-inch PMTs and 25,600 3-inch PMTs, achieving a 3\% energy resolution (at 1~MeV). Precise simulation plays a crucial role in the experiment. Developed using the SNiPER framework and Geant4 toolkit, the JUNO simulation software is a key component of the JUNO offline software (JUNOSW). The large detector size and the broad energy range of interest pose challenges for detector simulation in terms of CPU time and memory consumption. As the computing nodes shift to include multiple integrated CPU cores, traditional single-threaded computing model can lead to large memory footprints and inefficient use of system resources. Multi-threading on many-core architectures can significantly improve resource utilization. This paper introduces the design and implementation of multi-threaded simulation software for the JUNO experiment.

physics.ins-det↗

arXiv2020

Velocity Distribution of a Homogeneously Cooling Granular Gas

In contrast to molecular gases, granular gases are characterized by inelastic collisions and require therefore permanent driving to maintain a constant kinetic energy. The kinetic theory of granular gases describes how the average velocity of the particles decreases after the driving is shut off. Moreover it predicts that the rescaled particle velocity distribution will approach a stationary state with overpopulated high-velocity tails as compared to the Maxwell-Boltzmann distribution. While this fundamental theoretical result was reproduced by numerical simulations, an experimental confirmation is still missing. Using a microgravity experiment which allows the spatially homogeneous excitation of spheres via magnetic fields, we confirm the theoretically predicted exponential decay of the tails of the velocity distribution.

cond-mat.soft↗

arXiv2020

Acoustic Waves in Granular Packings at Low Confinement Pressure

Elastic properties of a granular packing show nonlinear behavior determined by its discrete structure and nonlinear inter-grain force laws. Acoustic waves show a transition from constant, pressure-dependent sound speed to a shock-wave like behavior with amplitude-determined propagation speed. This becomes increasingly visible at low static confinement pressure as the transient regime shifts to lower wave amplitudes for lower static pressure. In microgravity, confinement pressure can be orders of magnitude lower than in a ground based experiment. Also, the absence of hydrostatic gradients allows for much more homogeneous and isotropic pressure distribution. We present a novel apparatus for acoustic wave transmission measurements at such low packing pressures. A pressure control loop is implemented by a microcontroller that monitors static force sensor readings and adjusts the position of a movable wall with a linear motor until the desired pressure is reached. Measurements of acoustic waves are possible using accelerometers embedded in the granular packing as well as piezos. For excitation we use a voice coil-driven wall, with a large variety of signal shapes, frequencies and amplitudes. This enables experiments both in the linear and strongly nonlinear regime.

cond-mat.soft↗

arXiv2016

Early Stopping for Interleaver Recovering of Turbo Codes

Parameter recovering of channel codes is important in applications such as cognitive radio. The main task for that of a turbo code is to recover the interleaver. The existing optimal algorithm recovers interleaver parameters incrementally one by one. This algorithm continues till the end even if it has failed in the halfway. And there would be lots of wasted computation, as well as incorrectly recovered parameters that will badly deteriorate turbo decoding performance. To address such drawbacks, this paper proposes an early stopping method for the algorithm. Thresholds needed for the method are set through theoretical analysis. Simulations show that the proposed method is able to stop the algorithm in time after it has failed, while no significant degradation in the correct recovering probability is observed.

cs.IT↗

arXiv2013

Monitoring Three-Dimensional Packings in Microgravity

We present results from experiments with granular packings in three dimensions in microgravity as realized on parabolic flights. Two different techniques are employed to monitor the inside of the packings during compaction: (1) X-ray radiography is used to measure in transmission the integrated fluctuations of particle positions. (2) Stress-birefringence in three dimensions is applied to visualize the stresses inside the packing. The particle motions below the transition into an arrested packing are found to produce a well agitated state. At the transition, the particles lose their energy quite rapidly and form a stress network. With both methods, non-arrested particles (rattlers) can be identified. In particular, it is found that rattlers inside the arrested packing can be excited to appreciable dynamics by the rest-accelerations (g-jitter) during a parabolic flight without destroying the packings. At low rates of compaction, a regime of slow granular cooling is identified. The slow cooling extends over several seconds, is described well by a linear law, and terminates in a rapid final collapse of dynamics before complete arrest of the packing.

cond-mat.soft↗