arXiv subjects

Pei Xiao

Publications and source records attributed to Pei Xiao.

At least 19 recordsLinked to original sources

arXiv2026

AI-based Interference Mitigation for Power-domain Spectrum Sharing among LEO Satellites

Low-earth orbits (LEO) satellites have recently gained wide attention for their potential to provide high-data-rate services in desert, sea, and rural areas. Currently such systems operate in the Ku band on the down-link. However, inter-operator LEO satellites produce frequent In-Line-Events (ILE) creating co-channel interference between their waveforms. This situation will be exacerbated with the launch of more constellations being launched. To address this challenge, we propose a novel interference mitigation system based on power control. Specifically, satellites from one operator will adjust its transmit power to create a sufficient received-power gap for co-frequency beams, enabling successive interference cancellation (SIC) or AI-assisted algorithms on the user-side for interference mitigation, where AI requires a smaller power gap. We use the waveforms from Starlink and EutelsatOneweb to evaluate the designed system. Results show the designed system can significantly mitigate interference and increase the overall spectrum efficiency.

eess.SP↗

arXiv2026

Non-Uniform Antenna Array Design with Large Inter-Element Spacing for Massive MIMO

In massive multiple-input multiple-output (MIMO) systems, uniform arrays are typically configured with inter-element spacing no greater than half a wavelength to avoid grating lobes and spatial aliasing. However, many emerging fifth- and sixth-generation (5G/6G) applications rely on distributed arrays whose inter-element spacing far exceeds half a wavelength. In this paper, we propose an electromagnetic mutual-information-theoretic (EMIT)-guided non-uniform array (NUA) design with large inter-element spacing for massive MIMO systems to address the grating lobes and spatial aliasing artifacts, and in the meantime, to reduce the hardware cost and energy consumption. We start by developing a multipath channel model for non-uniform planar arrays, and analyze the resulting channel characteristics in terms of inter-user interference, aperture efficiency, favorable propagation and channel capacity for the proposed typical NUA patterns. The model is further extended to wideband scenarios, where NUAs demonstrate improved robustness against beam squint due to their more compact element distribution. In addition, we introduce an EMIT approach to NUA design, which links the spatial sampling pattern of an antenna array to the capacity of the resulting MIMO channel. This gives rise to two complementary shaping strategies, amplitude tapering and geometric shaping, and their joint optimization. Numerical results demonstrate that the proposed NUAs significantly outperform conventional uniform arrays in aperture efficiency, channel orthogonality, beam squint mitigation, capacity, and error rate performance.

eess.SP↗

arXiv2026

An Optical Pathway to Movable Rydberg Atomic Quantum Receivers

This paper develops an optically movable Rydberg atomic quantum receiver (RAQR), in which the probe and coupling beams are steered within each vapor cell to dynamically reconfigure the effective radio-frequency (RF) sensing position without mechanical actuation. A closed-form equivalent baseband model is derived by separating the atomic transduction coefficient, optical steering phase, and cell-center array response into distinct factors and the accuracy of the resulting model is validated against numerical solutions of the Lindblad master equation. Based on the derived model, we reveal two complementary channel-shaping mechanisms, including intrinsic beam-pattern shaping through RF-to-optical transduction and per-cell phase control enabled by optical displacement. To further exploit these capabilities, a non-convex sum-rate maximization problem is formulated over the optical positions and local oscillator design and solved via an alternating optimization framework with analytical gradients. Simulation results validate the derived model and demonstrate substantial performance gains enabled by optical movability, highlighting its potential as a programmable receiver architecture for future wireless networks.

eess.AS↗

arXiv2026

Green Cell-Free Massive MIMO for ISAC: Joint Cloud, Fronthaul and Radio Resource Allocation

In this paper, we develop a cross-layer end-to-end (E2E) resource orchestration framework for green CF-mMIMO ISAC systems with distributed multi-target detection. We propose a distributed sensing approach in which receive access points (RX-APs) compute local test statistics, which are aggregated at the cloud using weights based on sensing interference and channel quality. We derive the local maximum a posteriori ratio test (MAPRT) detectors under fully informed (FIS) and partially informed (PIS) operation, representing different levels of transmit-signal information at the RX-APs. We further characterize their processing and fronthaul requirements and derive a network power model incorporating radio transmission, AP and cloud processing, and fronthaul infrastructure. We formulate a mixed-integer non-convex problem that jointly optimizes transmit powers, AP modes, UE and sensing-area associations, RX-AP assignments, and active fronthaul and cloud resources subject to communication, sensing, power, processing-capacity, and fronthaul constraints. A two-stage iterative algorithm based on Big-M reformulation, convex--concave programming, penalty-based relaxation, and structured discrete recovery is developed. Numerical results show that the proposed E2E framework reduces total power by up to 50% compared with transmit-power-only optimization and by approximately 11-17% compared with joint radio optimization under full coordination, while maintaining detection probabilities above 0.95. The results also reveal a fundamental implementation trade-off: FIS provides lower detector-processing complexity and higher detection performance, whereas PIS substantially reduces fronthaul requirements.

cs.IT↗

arXiv2026

Queue-Aware Graph Reinforcement Learning for UAV-ISAC-Assisted Maritime Data Collection

This paper studies high-altitude platform (HAP)-assisted sparse cooperative integrated sensing and communication (ISAC) for UAV-enabled ocean monitoring. A fleet of rotary-wing UAVs senses drifting buoys, collects their monitoring data, and reports local posterior estimates to a HAP that performs fusion and sparse cooperation control. The model explicitly accounts for a spatially correlated sea-patch field, patch-aware buoy dynamics, RCS- and clutter-aware echo sensing, fused posterior Cramér-Rao bounds (PCRBs), and propulsion-energy-limited UAV mobility. The long-horizon objective is cast as a queue-weighted buffered-collection Markov decision process rather than instantaneous throughput, where each buoy maintains a backlog of buffered observations. The resulting long-horizon design is formulated as a mixed discrete-continuous problem with sensing, communication, mobility, safety, buffered-collection, and onboard-energy constraints. To address the combinatorial association component without replacing learning by a deterministic optimizer, we propose a structured feasible-association graph-MARL framework. A heterogeneous graph encoder produces candidate-edge logits, and a masked sequential b-matching policy samples legal UAV-buoy associations while exactly satisfying UAV-load and buoy-cluster constraints. A MAPPO-style training procedure, an independent queue-state value critic, and a consistency-verification protocol are then specified to support reproducible training. Simulation results on congested maritime scenarios show that the proposed policy improves the cumulative queue-weighted collection utility by about 106\% over the rate-driven deterministic decoder, maintains a large margin across sea-state sweeps and medium-to-heavy traffic loads, and transfers to larger networks without fine-tuning.

eess.SY↗

arXiv2026

CSI Reconstruction in Fluid Antenna Systems Without Spatial Covariance Priors

Fluid antenna systems (FASs) exploit many candidate ports for spatial diversity, but hardware constraints allow channel observations at only a few active ports. Whether full-port CSI can be recovered without pre-acquired channel statistics remains open. Under the Clarke isotropic scattering model, we show that the channel lies in a low-dimensional spatial modal subspace determined by the scattering environment rather than the total port count. Consequently, recovery becomes feasible when the number of observed ports reaches the modal dimension (i.e., $M\geq r$), even when $M\ll N$. We further establish a sharp feasibility threshold: reliable recovery is impossible below this dimension regardless of SNR, whereas accuracy improves with additional observations above it. By decomposing the recovery error into modal truncation, estimation, and learning components, we derive explicit tradeoffs among RF chains, pilot overhead, transmit power, and training data. These results enable scalable prior-free full-port CSI recovery with few active ports.

cs.IT↗

arXiv2026

Joint Chirp Parameter Selection and Low-Complexity MMSE Receiver Design for AFDM Systems

Affine frequency division multiplexing (AFDM) has emerged as a promising waveform against doubly selective channels under high-mobility communication scenarios. Optimal chirp parameter selection and reduced-complexity receiver design in AFDM are essential for achieving satisfactory bit error rate (BER) performance with low computational complexity. In this paper, we investigate the joint optimization of chirp-parameter selection and low-complexity minimum mean square error (MMSE)-based receiver design by exploiting the structural characteristics of the AFDM effective channel matrix (ECM). First, a simplified BER performance metric is derived by leveraging the diagonal and circulant structure of the discrete affine Fourier transformation (DAFT), based on which a fast circulant-diagonal aggregation (FCDA) algorithm is developed for efficient $c_1$ selection. Then, a low-complexity banded MMSE (LC-BMMSE) receiver is developed by constructing a cyclic-banded ECM through path-wise structured sparsification, where banded Cholesky factorization is employed to avoid direct matrix inversion. Building upon the proposed BER metric and the LC-BMMSE receiver, a hierarchical-search-based joint chirp parameter and structured sparsification (HS-JCPS) algorithm is further proposed to jointly optimize the chirp parameter and sparsification pattern under a given complexity constraint. Simulation results demonstrate that the proposed FCDA reduces the search time for the optimal $c_1$ by an order of magnitude compared with using a BER-based criterion. Moreover, the proposed HS-JCPS algorithm with the LC-BMMSE receiver can identify a near-optimal $c_1$, while attaining a superior performance-complexity tradeoff.

eess.SP↗

arXiv2026

Arbitrary Reflectionless Optical Routing via Non-Hermitian Zero-Index Networks

Optical routers are fundamental to photonic systems, but their performance is often limited by unwanted reflections and constrained functionalities. Existing design strategies generally lack complete control over reflectionless pathways and typically require computationally intensive iterative optimization. A general analytical framework for the inverse design of arbitrary reflectionless routing has remained unavailable. Here, we present an analytical inverse-design approach based on non-Hermitian zero-index networks, which enables arbitrary reflectionless routing for nearly any desired scattering response. By establishing a direct algebraic mapping between target scattering responses and the network's physical parameters, we transform the design process from iterative optimization into deterministic calculation. This approach enables the precise engineering of arbitrary reflectionless optical routing. We demonstrate its broad utility by designing devices from unicast and multicast routers with full amplitude and phase control to coherent beam combiners and spatial mode demultiplexers in four-port and six-port networks. Our work provides a systematic and analytical route to designing advanced light-control devices.

physics.optics↗

arXiv2026

SemDPLA: Semantic Communication-based Distributed Physical-Layer Authentication for 6G-enabled Dense IoT

With the rapid development of 6G, increasingly dense device connectivity imposes more strict requirements on multi-users Physical-Layer Authentication (PLA). Compared with cryptography-based methods, PLA enables lightweight authentication by using the uniqueness of wireless channels. However, existing PLA schemes in dense wireless scenarios often suffer from weak fingerprint discriminability and limited computation and communication resources. To address these challenges, we propose a Semantic Communication-based Distributed PLA (SemDPLA) framework. The framework constructs fused central semantic Channel State Information (CSI) fingerprints by fusing semantic information from a central node and multiple distributed nodes. Specifically, we introduce semantic communication to reduce the impact of low Signal Noise Ratio (SNR) and the consumption of communication resource during the transmission from distributed nodes to central node. Furthermore, we propose an ArcFace-based classification method and a semantic fingerprint-oriented distributed voting consistency mechanism to enhance device classification accuracy. Simulation results demonstrate that the proposed SemDPLA scheme performs better than single-node authentication, decision fusion, raw-CSI transmission, and feature fusion baselines. It achieves equal error rates (EERs) of 8.6% at 0 dB and 3.4% at 20 dB. It also achieves classification accuracies of 91.4% at 0 dB and above 95.8% from 5 to 20 dB. Moreover, SemDPLA is robust in low SNR environment and under attacks of abnormal nodes.

eess.SP↗

arXiv2026

AFDM-FTN: A Spectrally Efficient Waveform for High-Mobility Communications

This paper proposes an affine frequency division multiplexing (AFDM)-aided faster-than-Nyquist (FTN) waveform, termed AFDM-FTN, to enhance spectral efficiency (SE) in high-mobility communication scenarios. We first derive the AFDM-FTN input-output relationship and analyze the FTN-induced interference pattern in AFDM-FTN. To address the channel estimation challenges, a low-complexity channel estimator based on the basis expansion model (BEM) is developed. By exploiting the intrinsic characteristics of the AFDM channel matrix and the FTN coefficient matrix, a multi-layer message passing (MLMP) algorithm is proposed that leverages the sparsity of the time-domain (TD) channel and the FTN coefficient matrix, where belief messages are iteratively propagated across the TD channel, FTN, and transform layers. Building upon the BEM-assisted channel estimation and MLMP, a low-complexity joint channel estimation and data detection scheme (BEM-MLMP-JCED) is further developed to iteratively refine channel estimation with the aid of transmitted data. Finally, the channel estimation lower bound, the mean square error (MSE) performance of the BEM-MLMP-JCED, and the computational complexity are analyzed. Simulation results demonstrate that the proposed AFDM-FTN system with BEM-MLMP-JCED achieves comparable BER to conventional AFDM while providing enhanced SE and reduced complexity compared to benchmark receivers.

eess.SP↗

arXiv2026

Rydberg Atomic Quantum Radio: A Comprehensive Survey From Wireless Communication Perspective

Next-generation space-air-ground-sea integrated networks (SAGSIN) impose unprecedented demands on advanced radio frequency (RF) receivers for full-spectrum agility, ultra-high sensitivity, and anti-jamming resilience, pushing conventional electronic receivers to their physical limits. To address these challenges, the Rydberg atomic quantum (RAQ) radio has emerged as a promising quantum-enabled receiver paradigm that directly maps electromagnetic fields onto atomic quantum states, offering an alternative to alleviate bottlenecks of conventional RF front ends. To provide a clear research roadmap, this survey presents a comprehensive review of RAQ radios by bridging atomic physics and wireless communications. Specifically, we first introduce the underlying quantum mechanisms, representative architectures, and atomic response models of RAQ radio. On this basis, state-of-the-art techniques for enhancing sensitivity, instantaneous bandwidth, and operating frequency are systematically reviewed, with particular emphasis on the inherent trade-offs among these key metrics. To connect quantum response with communication theory, we further analyze equivalent channel modeling frameworks for characterizing systematic performance limits. From the wireless communication perspective, some RAQ-enabled advanced technologies including cognitive, interference-resilient, low-frequency and multiple-input multiple-output (MIMO) communications are reviewed, alongside emerging deployment scenarios such as satellite networks, integrated sensing and communications, and reconfigurable intelligent surface-assisted systems. Finally, we identify open challenges and provide potential future directions of RAQ radio to inspire the further exploration.

eess.SP↗

arXiv2026

Unified Analytical Model for Atomic Receivers Under Typical Quantum Interference Paths

Atomic receivers, which leverage the quantum interference termed electromagnetically induced transparency (EIT) for radio-frequency (RF) to optical signal transduction, offer a revolutionary paradigm for next-generation wireless communications. However, current information-theoretic characterizations are predominantly restricted to the Ξ-type of EIT path and rely heavily on the weak-probe approximation, which fails to predict the behavior of the atomic receivers under high signal-to-noise ratio regimes. In this paper, we establish a unified analytical model for atomic receivers, and apply this model to three typical quantum interference paths, i.e., V -type, Λ-type, and Ξ-type configurations. To provide a universal characterization, we propose the quantum coherence transfer coefficient (QCTC) to model the equivalent channel response induced by atomic receivers, using a steady-state perturbation framework built on the three-level EIT solution. The closed-form expressions of equivalent channel gains are then derived for three paths. Our results provide an analytical foundation for future capacity analysis and waveform optimization in atomic radio communication.

eess.SP↗

arXiv2026

Cell-Level Channel Shaping for Rydberg Atomic Quantum Receivers in Satellite Uplinks With Doppler-Enabled Superheterodyne Reception

In this paper, we propose a self-superheterodyne Rydberg uniform array receiver for satellite uplink communications, in which the Doppler shift naturally induced by satellite motion is exploited to generate the intermediate-frequency signal. We first develop a near-field local oscillator (LO) synthesis model and characterize the spatially varying LO electric field across the Rydberg vapor cells. Based on a vapor-cell-center approximation, a closed-form radio frequency (RF)-to-optical conversion is derived, establishing an explicit bridge between the incident satellite signal and the LO-induced cell-level response. The derived model reveals that the programmable LO serves as an analog-domain channel-shaping mechanism by controlling the cell-level transduction gain, phase response, and phase-matching behavior. Building upon this equivalent channel model, we formulate an LO design problem that maximizes the Shannon capacity of the effective channel, and develop an efficient optimization algorithm for the LO amplitudes and phases. Simulation results demonstrate that the vapor-cell transduction can reshape the effective channel, adjust the beam-pattern alignment, and moderately reduce the inter-user correlation under suitable LO configurations. Furthermore, the proposed LO design significantly improves the achievable capacity over benchmark schemes, offering a promising self-superheterodyne Rydberg architecture for future satellite communication systems.

eess.SP↗

arXiv2026

Multi-Functional Chirp Signalling for Next-Generation Multi-Carrier Wireless Networks: Communications, Sensing and ISAC Perspectives

To meet the increasingly demanding quality-of-service requirements of the next-generation multi-carrier mobile networks, it is essential to design multi-functional signalling schemes facilitating efficient, flexible, and reliable communication and sensing in complex wireless environments. As a compelling candidate, we advocate chirp signalling, beneficially amalgamating sequences (e.g., Zadoff-Chu sequences) with waveforms (e.g., chirp spread spectrum and frequency-modulated continuous wave (FMCW) radar), given their resilience against doubly selective channels. Besides chirp sequences, a wide range of chirp waveforms is considered, ranging from FMCW to affine frequency-division multiplexing (AFDM), to create a promising chirp multicarrier waveform. This study also highlights the advantages of such waveforms in supporting reliable high-mobility communications, plus integrated sensing and communications (ISAC). Finally, we outline several emerging research directions for chirp signalling designs.

eess.SP↗

arXiv2026

Frame-Based AFDM-ISAC Waveform Design With Chirp-Enabled Pulse Compression

This paper proposes an Affine frequency division multiplexing (AFDM)-empowered integrated sensing and communications (ISAC) design, referred to as AFDM-ISAC. We first design a novel AFDM-ISAC frame structure that consists of both ISAC and pure data symbols. Each ISAC symbol consists of a single chirp subcarrier for both sensing and channel estimation, while the remaining subcarriers are allocated for communication. Building upon this structure, we present an analog-domain sensing receiver that down-mixes the received echo with a local chirp to fully exploit \textit{chirp compression} gains avoiding the need for full-duplex hardware. In addition, a sensing fusion algorithm, guided by AFDM modulation parameters, is further proposed in the digital domain. Leveraging the distinct features of the proposed AFDM-ISAC frame, we present a low-complexity channel estimation scheme for high mobility channels based on a generalized complex exponential basis expansion model (GCE-BEM), along with an optimal power allocation strategy between pilot and data symbols. Moreover, to support frame-based AFDM communications, a GCE-BEM-based Kalman filter is also employed for robust intra-frame channel estimation.

eess.SP↗

arXiv2026

Spatially Coupled Sparse Code Multiple Access (SC-SCMA): A Spectral Graph Approach

This paper presents a spatially coupled sparse code multiple access (SC-SCMA) framework to overcome the performance and scalability limitations of conventional SCMA systems. By analyzing the pairwise error probability associated to multi-user error patterns, we show that spatial coupling projects the superimposed SCMA codewords into a higher-dimensional effective signal space, leading to a strictly improved minimum Euclidean distance (MED) compared with conventional SCMA, while simultaneously enhancing the coding gain through global message propagation and the diversity gain through inter-block resource spreading. Such a distance gain is shown to be governed by the effective access dimensionality (EAD) induced by the coupled factor graph. With the aid of spectral graph theory, we establish a direct relationship between the spectral gap of the factor graph and a lower bound on the EAD, providing a computable structural metric that guarantees MED improvement under various error patterns. Building upon these theoretical insights, we introduce a low-complexity structure-aware codebook design approach, including a spectral-gap-oriented construction of spatially coupled factor matrices and a localized codebook optimization strategy that exploits the dominant error-inducing local user group. Simulation results validate the analysis and demonstrate that the proposed SC-SCMA consistently outperforms conventional SCMA in overloaded massive access channels.

eess.SP↗

arXiv2026

Sensing-Assisted Predictive Beamforming for UAV-Enabled Ocean Monitoring Networks

This paper investigates a sensing-assisted predictive beamforming framework for UAV--buoy maritime monitoring by explicitly accounting for wave-induced buoy dynamics and residual sea clutter. A frame-based UAV mission workflow is first established, where the UAV transmits integrated sensing and communication signals to acquire buoy echoes and to support subsequent uplink beam alignment. To characterize short-horizon buoy motion, a correlated-acceleration state-space model is developed by combining a Singer process for wave-driven excitation with a slowly varying current-drift term. Given the resulting nonlinear reflection, Doppler, and delay measurements, the posterior Fisher information matrix and the corresponding posterior Cramér--Rao bound (PCRB) are derived, and the predicted horizontal-position PCRB is adopted as the sensing metric. A per-frame worst-buoy design is then formulated to jointly optimize sensing power allocation and UAV position under uplink-rate, UAV-power, and mobility constraints. By exploiting a Schur-complement reformulation and a lagged successive convex approximation, the resulting subproblem is converted into a convex conic program with tractable complexity. Simulation results show that the proposed scheme maintains robust prediction and communication performance under denser buoy deployments and harsher sea conditions, and outperforms several baseline designs. In particular, the pronounced root mean square error (RMSE) degradation of the communication-only benchmark confirms that sensing-assisted state refinement is essential for accurate predictive beamforming in dynamic maritime environments. Compared with a full first-order Taylor expansion method, it achieves a more attractive performance--complexity tradeoff for online deployment.

eess.SP↗

arXiv2026

Towards Standardizing Affine Frequency Division Multiplexing (AFDM) for Future Wireless Networks

Affine frequency division multiplexing~(AFDM) has emerged as a compelling waveform candidate for future wireless networks, owing to its strong resilience to doubly selective channels and its ability to enable the seamless integration of communication and sensing functionalities. Against this context, this article provides a systematic study of AFDM from a standardization perspective. We first introduce the principles of AFDM and discuss the major considerations involved in waveform standardization. We then examine the backwards compatibility of AFDM with 4G/5G multi-numerology frameworks and their anticipated evolution, frequency-modulated continuous-wave (FMCW) radar waveforms, and long-range (LoRa) modulation, demonstrating that AFDM can be incorporated into legacy processing chains with limited modification. Key standardization-critical capabilities are further discussed, including multiple-antenna and multi-user support, and peak-to-average power ratio (PAPR). Finally, we investigate the potential of AFDM in several emerging scenarios, including non-terrestrial networks~(NTN), integrated sensing and communications (ISAC), vehicle-to-everything (V2X), and underwater acoustic (UWA) communications, whereby severe delay-Doppler dispersion places stringent demands on waveform robustness. Through these explorations, it is shown that that AFDM represents a timely and compelling technology for future wireless networks.

eess.SP↗