arXiv subjects

Patrick Stender

Publications and source records attributed to Patrick Stender.

5 recordsLinked to original sources

arXiv2025

Revealing Nanoscale Molecular Organization in Liquid Crystals via Cryogenic Atom Probe Tomography

While liquid crystals (LCs) have been extensively studied, obtaining a comprehensive nanoscale picture of their molecular organization remains challenging, as conventional techniques face an intrinsic trade-off between spatial and chemical resolution. Here, cryogenic atom probe tomography (cryo-APT) is introduced as a new analytical approach for LC materials, using 4'-Pentyl-4-cyanobiphenyl (5CB) and 4'-Octyl-4-cyanobiphenyl (8CB) as representative model compounds. This was enabled by a tailored cryogenic focused ion beam (cryo-FIB) protocol optimized for small organic molecules. The method enables controlled field evaporation of both intact molecules and diagnostic fragments, achieving over 90% molecular retention while preserving four characteristic dissociation patterns. By spatially correlating these fragmentation profiles with the local electric field derived from the tip geometry, we reveal field-directed dissociation pathways of CB molecules. In parallel, the distribution of intact molecular ions enables nanoscale visualization of material structure: we resolve homogeneous mixing of 5CB and 8CB in the nematic phase and directly observe the sub-nanometer crystalline layering in a supercooled 8CB sample, with contrast to the surrounding amorphous matrix suggesting the presence of a solid-liquid interface. This work establishes cryo-APT as a new powerful analytical platform for LC research and reveals its broad potential for application in soft matter systems.

cond-mat.mtrl-sci↗

arXiv2025

Surface oxidation of Pt and PtPd alloys during NO conversion investigated by Atom Probe Tomography

In this study, the dynamic oxidation state changes of pure Pt and 50at% PtPd alloy catalysts were investigated during a temperature ramp from 80 to 450 C under a reactive gas mixture of 500 ppm NO and 3 % Oxygen in Nitrogen atmosphere. These changes are closely correlated with variations in NO conversion efficiency. Sharp tip specimens were prepared from Pt and PtPd alloy wires by electrochemical polishing and Focused Ion Beam annular milling, with the hemispherical apex serving as a model for nanoscale catalyst surfaces. The samples were exposed to the reactive atmosphere in a dedicated reaction chamber and subsequently analyzed using atom probe tomography. Effective oxide thicknesses and three-dimensional surface morphology were quantitatively evaluated. A pronounced decrease in oxide thickness was observed during the first cooling and second heating cycles, particularly below 200 C, indicating reversible redox behavior on both Pt and PtPd alloy surfaces. This behavior correlates with the inverse hysteresis of NO conversion measured for both systems, suggesting that the redox reversibility is driven primarily by reaction kinetics rather than thermodynamic stability.

cond-mat.mtrl-sci↗

arXiv2021

The modular Atom Probe Concept

Atomic probe tomography (APT), based on the work of Erwin Mueller, is able to generate three-dimensional chemical maps in atomic resolution. The required instruments for APT have evolved over the last 20 years from an experimental to an established method of materials analysis. Here, we describe the realization of a new instrument concept that allows the direct attachment of APT to a dual beam SEM microscope with the main achievement of fast and direct sample transfer. New operational modes are enabled regarding sample geometry, alignment of tips and microelectrode. The instrument is optimized to handle cryo-samples at all stages of preparation and storage. The instrument comes with its own software for evaluation and reconstruction. The performance in terms of mass resolution, aperture angle, and detection efficiency is demonstrated with a few application examples.

physics.ins-det↗

arXiv2021

Status and direction of atom probe analysis of frozen liquids

Imaging of liquids and cryogenic biological materials by electron microscopy has been recently enabled by innovative approaches for specimen preparation and the fast development of optimised instruments for cryo-enabled electron microscopy (cryo-EM). Yet, Cryo-EM typically lacks advanced analytical capabilities, in particular for light elements. With the development of protocols for frozen wet specimen preparation, atom probe tomography (APT) could advantageously complement insights gained by cryo-EM. Here, we report on different approaches that have been recently proposed to enable the analysis of relatively large volumes of frozen liquids from either a flat substrate or the fractured surface of a wire. Both allowed for analysing water ice layers which are several microns thick consisting of pure water, pure heavy-water and aqueous solutions. We discuss the merits of both approaches, and prospects for further developments in this area. Preliminary results raise numerous questions, in part concerning the physics underpinning field evaporation. We discuss these aspects and lay out some of the challenges regarding the APT analysis of frozen liquids.

cond-mat.mtrl-sci↗

arXiv2011

Hillock formation of Pt thin films on Yttria stabilized Zirconia single crystals

The stability of a metal thin films on a dielectric substrate is conditioned by the magnitude of the interactive forces at the interface. In the case of a non-reactive interface and weak adhesion, the minimization of free surface energy gives rise to an instability of the thin film. In order to study these effects, Pt thin films with a thickness of 50 nm were deposited via ion-beam sputtering on yttria stabilized zirconia single crystals. All Pt films were subjected to heat treatments up to 973 K for 2 h. The morphological evolution of Pt thin films has been investigated by means of scanning electron microscopy (SEM), atomic force microscopy (AFM) and standard image analysis techniques. Three main observations have been made: i) the deposition method has a direct impact on the morphological evolution of the film during annealing. Instead of hole formation, that is typically observed as response to a thermal treatment, anisotropic pyramidal shaped hillocks are formed on top of the film. ii) It is shown by comparing the hillocks' aspect ratio with finite element method (FEM) simulations that the hillock formation can be assigned to a stress relaxation process inside the thin film. iii) By measuring the equilibrium shapes and the shape fluctuations of the formed Pt hillocks the anisotropy of the step free energy and its stiffness have been derived in addition to the anisotropic kink energy of the hillock's edges.

cond-mat.mtrl-sci↗