arXiv subjects

Patrick Michel

Publications and source records attributed to Patrick Michel.

At least 55 records · Page 3Linked to original sources

arXiv2020

Validating N-body code Chrono for granular DEM simulations in reduced-gravity environments

The Discrete Element Method (DEM) is frequently used to model complex granular systems and to augment the knowledge that we obtain through theory, experimentation, and real-world observations. Numerical simulations are a particularly powerful tool for studying the regolith-covered surfaces of asteroids, comets, and small moons, where reduced-gravity environments produce ill-defined flow behaviors. In this work, we present a method for validating soft-sphere DEM codes for both terrestrial and small-body granular environments. The open-source code Chrono is modified and evaluated first with a series of simple two-body-collision tests, and then, with a set of piling and tumbler tests. In the piling tests, we vary the coefficient of rolling friction to calibrate the simulations against experiments with 1 mm glass beads. Then, we use the friction coefficient to model the flow of 1 mm glass beads in a rotating drum, using a drum configuration from a previous experimental study. We measure the dynamic angle of repose, the flowing layer thickness, and the flowing layer velocity for tests with different particle sizes, contact force models, coefficients of rolling friction, cohesion levels, drum rotation speeds and gravity levels. The tests show that the same flow patterns can be observed at Earth and reduced-gravity levels if the drum rotation speed and the gravity-level are set according to the dimensionless parameter known as the Froude number. Chrono is successfully validated against known flow behaviors at different gravity and cohesion levels, and will be used to study small-body regolith dynamics in future works.

astro-ph.EP↗

arXiv2020

Spin-driven evolution of asteroids' top-shapes at fast and slow spins seen from (101955) Bennu and (162173) Ryugu

Proximity observations by OSIRIS-REx and Hayabusa2 provided clues on the shape evolution processes of the target asteroids, (101955) Bennu and (162173) Ryugu. Their oblate shapes with equatorial ridges, or the so-called top shapes, may have evolved due to their rotational conditions at present and in the past. Different shape evolution scenarios were previously proposed; Bennu's top shape may have been driven by surface processing, while Ryugu's may have been developed due to large deformation. These two scenarios seem to be inconsistent. Here, we revisit the structural analyses in earlier works and fill a gap to connect these explanations. We also apply a semi-analytical technique for computing the cohesive strength distribution in a uniformly rotating triaxial ellipsoid to characterize the global failure of top-shaped bodies. Assuming that the structure is uniform, our semi-analytical approach describes the spatial variations in failed regions at different spin periods; surface regions are the most sensitive at longer spin periods, while interiors fail structurally at shorter spin periods. This finding suggests that the shape evolution of a top shape may vary due to rotation and internal structure, which can explain the different evolution scenarios of Bennu's and Ryugu's top shapes. We interpret our results as the indications of top shapes' various evolution processes.

astro-ph.EP↗

arXiv2020

Tidal distortion and disruption of rubble-pile bodies revisited -- Soft-sphere discrete element analyses

During close approaches to planets or stars, the morphological and dynamical properties of rubble-pile small bodies can be modified, and some may catastrophically break up. This phenomenon is of particular interest for understanding the evolution and population of small bodies, and for making predictions for future encounters. Previous numerical explorations typically used methods that do not adequately represent the nature of rubble piles. The encounter outcomes and influence factors are still poorly constrained. Based on recent advances in modeling rubble piles, we aim to provide a better understanding of the tidal encounter processes through soft-sphere discrete element modeling (SSDEM) and to establish a database of encounter outcomes and the dependencies on encounter conditions and rubble-pile properties. We performed thousands of numerical simulations using the SSDEM implemented in the N-body code pkdgrav to study the dynamical evolution of rubble piles during close encounters with the Earth. The effects of encounter conditions, material strength, arrangement, and resolution of constituent particles are explored. Three typical tidal encounter outcomes are classified, i.e., deformation, mass shedding, and disruption, ranging from mild modifications to severe damages of the progenitor. The encounter speed and distance required for causing disruption events are much smaller than those predicted by previous studies, indicating a smaller creation rate of tidally disrupted small body populations. Extremely elongated fragments with axis ratios ~1:6 can be formed by moderate encounters. Our analyses of the spin-shape evolution of the largest remnants reveal reshaping mechanisms of rubble piles in response to tidal forces, consistent with stable rubble-pile configurations derived by continuum theory. A case study for SL9 suggests a low bulk density (0.2-0.3 g/cc) for its progenitor.

astro-ph.EP↗

arXiv2020

Collisional heating and compaction of small bodies: Constraints for their origin and evolution

The current properties of small bodies provide important clues to their origin and history. However, how much small bodies were processed by past collisions and to what extent they retain a record of processes that took place during the formation and early evolution of the Solar System is still poorly understood. Here we study the degree of collisional heating and compaction by analysing the large set of previous simulations of small body break-ups by Jutzi et al. (2019), which used porous targets of 50 - 400 km in diameter and investigated a large range of impact velocities, angles as well as energies. We find that the degree of impact processing is generally larger than found in previous studies which considered smaller objects (e.g. Jutzi et al., 2017; Schwartz et al., 2018). However, there is a clear dichotomy in terms of impact processing: the escaping material always experiences stronger heating than the material bound to the largest remnant. Assuming they originate from the same parent body, some of the observed differences between the recently visited asteroids Ryugu and Bennu may be explained by a different location of the material eventually forming these asteroids in the original parent body. Our results also provide constraints on the initial size of cometary nuclei.

astro-ph.EP↗

arXiv2020

Debiased albedo distribution for Near Earth Objects

We extend the most recent orbital and absolute magnitude Near Earth Object (NEO) model (Granvik et al., 2018) to provide a statistical description of NEO geometric albedos. Our model is calibrated on NEOWISE albedo data for the NEO population and reproduces these data very well once a simple model for the NEOWISE observational biases is applied. The results are consistent with previous estimates. There are about 1,000 NEOs with diameter D>1km and the mean albedo to convert absolute magnitude into diameter is 0.147. We do not find any statistically significant evidence that the albedo distribution of NEOs depends on NEO size. Instead, we find evidence that the disruption of NEOs at small perihelion distances found in Granvik et al. (2016) occurs preferentially for dark NEOs. The interval between km-sized bodies striking the Earth should occur on average once every 750,000 years. Low and high albedo NEOs are well mixed in orbital space, but a trend remains with higher albedo objects being at smaller semimajor axes and lower albedo objects more likely found at larger semimajor axes.

astro-ph.EP↗

arXiv2019

ASIME 2018 White Paper. In-Space Utilisation of Asteroids: Asteroid Composition -- Answers to Questions from the Asteroid Miners

In keeping with the Luxembourg government's initiative to support the future use of space resources, ASIME 2018 was held in Belval, Luxembourg on April 16-17, 2018. The goal of ASIME 2018: Asteroid Intersections with Mine Engineering, was to focus on asteroid composition for advancing the asteroid in-space resource utilisation domain. What do we know about asteroid composition from remote-sensing observations? What are the potential caveats in the interpretation of Earth-based spectral observations? What are the next steps to improve our knowledge on asteroid composition by means of ground-based and space-based observations and asteroid rendez-vous and sample return missions? How can asteroid mining companies use this knowledge? ASIME 2018 was a two-day workshop of almost 70 scientists and engineers in the context of the engineering needs of space missions with in-space asteroid utilisation. The 21 Questions from the asteroid mining companies were sorted into the four asteroid science themes: 1) Potential Targets, 2) Asteroid-Meteorite Links, 3) In-Situ Measurements and 4) Laboratory Measurements. The Answers to those Questions were provided by the scientists with their conference presentations and collected by A. Graps or edited directly into an open-access collaborative Google document or inserted by A. Graps using additional reference materials. During the ASIME 2018, first day and second day Wrap-Ups, the answers to the questions were discussed further. New readers to the asteroid mining topic may find the Conversation boxes and the Mission Design discussions especially interesting.

astro-ph.EP↗

arXiv2019

The Western Bulge of 162173 Ryugu Formed as a Result of a Rotationally Driven Deformation Process

162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial ridge, which is known as a spinning top-shape. A strong centrifugal force is a likely contributor to Ryugu's top-shaped features. Observations by Optical Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in geomorphology; the western side of this asteroid, later called the western bulge, has a smooth surface and a sharp equatorial ridge, compared to the other side. Here, we propose a structural deformation process that generated the western bulge. Applying the mission-derived shape model, we employ a finite element model technique to analyze the locations that experience structural failure within the present shape. Assuming that materials are uniformly distributed, our model shows the longitudinal variation in structurally failed regions when the spin period is shorter than ~3.75 h. Ryugu is structurally intact in the subsurface region of the western bulge while other regions are sensitive to structural failure. We infer that this variation is indicative of the deformation process that occurred in the past, and the western bulge is more relaxed structurally than the other region. Our analysis also shows that this deformation process might occur at a spin period between ~3.5 h and ~3.0 h, providing the cohesive strength ranging between ~4 Pa and ~10 Pa.

astro-ph.EP↗

arXiv2018

Fragment properties from large-scale asteroid collisions: I: Results from SPH/N-body simulations using porous parent bodies and improved material models

Understanding the collisional fragmentation and subsequent reaccumulation of fragments is crucial for studies of the formation and evolution of the small-body populations. Using an SPH / N-body approach, we investigate the size-frequency distributions (SFDs) resulting from the disruption of 100 km-diameter targets consisting of porous material, including the effects of pore-crushing as well as friction. Overall, the porous targets have a significantly higher impact strength (Q*D) than the rubble-pile parent bodies investigated previously (Benavidez et al., 2012) and show a behavior more similar to non-porous monolithic targets (Durda et al., 2007). Our results also confirm that for a given specific impact energy, the SFDs resulting from a parent body disruption are strongly dependent on the size scale.

astro-ph.EP↗

arXiv2018

Debiased orbit and absolute-magnitude distributions for near-Earth objects

The debiased absolute-magnitude and orbit distributions as well as source regions for near-Earth objects (NEOs) provide a fundamental frame of reference for studies of individual NEOs and more complex population-level questions. We present a new four-dimensional model of the NEO population that describes debiased steady-state distributions of semimajor axis, eccentricity, inclination, and absolute magnitude $H$ in the range $17<H<25$. The modeling approach improves upon the methodology originally developed by Bottke et al. (2000; Science 288, 2190-2194) in that it is, for example, based on more realistic orbit distributions and uses source-specific absolute-magnitude distributions that allow for a power-law slope that varies with $H$. We divide the main asteroid belt into six different entrance routes or regions (ER) to the NEO region: the $ν_6$, 3:1J, 5:2J and 2:1J resonance complexes as well as Hungarias and Phocaeas. In addition we include the Jupiter-family comets as the primary cometary source of NEOs. We calibrate the model against NEO detections by Catalina Sky Surveys' stations 703 and G96 during 2005-2012, and utilize the complementary nature of these two systems to quantify the systematic uncertainties associated to the resulting model. The most important ERs are the $ν_6$ and 3:1J resonance complexes with JFCs contributing a few percent of NEOs on average. We predict that there are $962^{+52}_{-56}$ ($802^{+48}_{-42}\times10^3$) NEOs with $H<17.75$ ($H<25$) and these numbers are in agreement with the most recent estimates found in the literature (the uncertainty estimates only account for the random component).

astro-ph.EP↗

arXiv2018

Asteroid Ryugu Before the Hayabusa2 Encounter

Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical and dynamical properties of Ryugu based on remote sensing and theoretical modeling. This information is used to construct a design reference model of the asteroid that is used for formulation of mission operations plans in advance of asteroid arrival. Particular attention is given to the surface properties of Ryugu that are relevant to sample acquisition. This reference model helps readers to appropriately interpret the data that will be directly obtained by Hayabusa2 and promotes scientific studies not only for Ryugu itself and other small bodies but also for the Solar System evolution that small bodies shed light on.

astro-ph.EP↗

arXiv2017

Constraints on the perturbed mutual motion in Didymos due to impact-induced deformation of its primary after the DART impact

Binary near-Earth asteroid (65803) Didymos is the target of the proposed NASA Double Asteroid Redirection Test (DART), part of the Asteroid Impact & Deflection Assessment (AIDA) mission concept. In this mission, the DART spacecraft is planned to impact the secondary body of Didymos, perturbing mutual dynamics of the system. The primary body is currently rotating at a spin period close to the spin barrier of asteroids, and materials ejected from the secondary due to the DART impact are likely to reach the primary. These conditions may cause the primary to reshape, due to landslides, or internal deformation, changing the permanent gravity field. Here, we propose that if shape deformation of the primary occurs, the mutual orbit of the system would be perturbed due to a change in the gravity field. We use a numerical simulation technique based on the full two-body problem to investigate the shape effect on the mutual dynamics in Didymos after the DART impact. The results show that under constant volume, shape deformation induces strong perturbation in the mutual motion. We find that the deformation process always causes the orbital period of the system to become shorter. If surface layers with a thickness greater than ~0.4 m on the poles of the primary move down to the equatorial region due to the DART impact, a change in the orbital period of the system and in the spin period of the primary will be detected by ground-based measurement.

astro-ph.EP↗

arXiv2017

Structural analysis of rubble-pile asteroids applied to collisional evolution

Solar system small bodies come in a wide variety of shapes and sizes, which are achieved following very individual evolutional paths through billions of years. This paper focuses on the reshaping process of rubble-pile asteroids driven by meteorite impacts. In our study, numerous possible equilibrium configurations are obtained via Monte Carlo simulation, and the structural stability of these configurations is determined via eigen analysis of the geometric constructions. The eigen decomposition reveals a connection between the cluster's reactions and the types of external disturbance. Numerical simulations are performed to verify the analytical results. The gravitational N-body code pkdgrav is used to mimic the responses of the cluster under intermittent non-dispersive impacts. We statistically confirm that the stability index, the total gravitational potential and the volume of inertia ellipsoid show consistent tendency of variation. A common regime is found in which the clusters tend towards crystallization under intermittent impacts, i.e., only the configurations with high structural stability survive under the external disturbances. The results suggest the trivial non-disruptive impacts might play an important role in the rearrangement of the constituent blocks, which may strengthen these rubble piles and help to build a robust structure under impacts of similar magnitude. The final part of this study consists of systematic simulations over two parameters, the projectile momentum and the rotational speed of the cluster. The results show a critical value exists for the projectile momentum, as predicted by theory, below which all clusters become responseless to external disturbances; and the rotation proves to be significant for it exhibits an "enhancing" effect on loose-packed clusters, which coincides with the observation that several fast-spinning asteroids have low bulk densities.

astro-ph.EP↗

arXiv2017

Ejecta cloud from the AIDA space project kinetic impact on the secondary of a binary asteroid: II. fates and evolutionary dependencies

This paper presents a quantitative study of the evolution of the ejecta cloud released from a hypervelocity impact on a binary asteroid. We performed numerical simulations of the post-impact dynamics of the ejecta cloud in the framework of the current mission scenario of AIDA mission project. A grid search of launching sites of ejecta was defined over the globe of Didymoon, and considering a wide range of possible ejection speeds, we determined the dependency of ejecta fate on launching sites (projectile impact sites) and speeds. This range allows us to track all the complex cases that include different types of dynamical fates. Two major mechanisms are found to be working broadly during the post-ejection evolution of the ejecta cloud: 1) ejecta on mean motion resonance orbits with Didymoon produce long-term quasi-periodic showers onto Didymoon over at least a couple of weeks after the projectile impact, 2) ejecta on non-resonant orbits produce a rapid and high re-accretion flux. This rapid and high flux occurs just once because ejecta on such orbits leave the system unless they experience a collision during their first encounter. For the second part of this study, we performed full-scale simulations of the ejecta cloud released from 6 hypothetical impact sites. We considered two kinds of material composing Didymoon's subsurface and then combined a power-law size distribution of the ejecta with an ejection speed distribution. We find that the ejecta cloud evolution can be divided in two periods. It starts with a first violent period (<10 hr) with fast re-accretion or ejection from the system. A second period is found to be more sensitive to the launching site than the first one. During this second period, ejecta will either re-accrete or being ejected from the system, depending both on their sizes and on their average survival time in close proximity of the binary components.

astro-ph.EP↗

arXiv2017

Creep stability of the proposed AIDA mission target 65803 Didymos: I. Discrete cohesionless granular physics model

As the target of the proposed Asteroid Impact & Deflection Assessment (AIDA) mission, the near-Earth binary asteroid 65803 Didymos represents a special class of binary asteroids, those whose primaries are at risk of rotational disruption. To gain a better understanding of these binary systems and to support the AIDA mission, this paper investigates the creep stability of the Didymos primary by representing it as a cohesionless self-gravitating granular aggregate subject to rotational acceleration. To achieve this goal, a soft-sphere discrete element model (SSDEM) capable of simulating granular systems in quasi-static states is implemented and a quasi-static spin-up procedure is carried out. We devise three critical spin limits for the simulated aggregates to indicate their critical states triggered by reshaping and surface shedding, internal structural deformation, and shear failure, respectively. The failure condition and mode, and shear strength of an aggregate can all be inferred from the three critical spin limits. The effects of arrangement and size distribution of constituent particles, bulk density, spin-up path, and interparticle friction are numerically explored. The results show that the shear strength of a spinning self-gravitating aggregate depends strongly on both its internal configuration and material parameters, while its failure mode and mechanism are mainly affected by its internal configuration. Additionally, this study provides some constraints on the possible physical properties of the Didymos primary based on observational data and proposes a plausible formation mechanism for this binary system. With a bulk density consistent with observational uncertainty and close to the maximum density allowed for the asteroid, the Didymos primary in certain configurations can remain geo-statically stable without including cohesion.

astro-ph.EP↗

arXiv2017

ASIME 2016 White Paper: In-Space Utilisation of Asteroids: "Answers to Questions from the Asteroid Miners"

The aim of the Asteroid Science Intersections with In-Space Mine Engineering (ASIME) 2016 conference on September 21-22, 2016 in Luxembourg City was to provide an environment for the detailed discussion of the specific properties of asteroids, with the engineering needs of space missions that utilize asteroids. The ASIME 2016 Conference produced a layered record of discussions from the asteroid scientists and the asteroid miners to understand each other's key concerns and to address key scientific questions from the asteroid mining companies: Planetary Resources, Deep Space Industries and TransAstra. These Questions were the focus of the two day conference, were addressed by scientists inside and outside of the ASIME Conference and are the focus of this White Paper. The Questions from the asteroid mining companies have been sorted into the three asteroid science themes: 1) survey, 2) surface and 3) subsurface and 4) Other. The answers to those Questions have been provided by the scientists with their conference presentations or edited directly into an early open-access collaborative Google document (August 2016-October 2016), or inserted by A. Graps using additional reference materials. During the ASIME 2016 last two-hours, the scientists turned the Questions from the Asteroid Miners around by presenting their own key concerns: Questions from the Asteroid Scientists . These answers in this White Paper will point to the Science Knowledge Gaps (SKGs) for advancing the asteroid in-space resource utilisation domain.

astro-ph.EP↗

arXiv2016

Nanoindenting the Chelyabinsk meteorite to learn about impact deflection effects in asteroids

The Chelyabinsk meteorite is a highly shocked, low porosity, ordinary chondrite, probably similar to S- or Q-type asteroids. Therefore, nanoindentation experiments on this meteorite allow us to obtain key data to understand the physical properties of near-Earth asteroids. Tests at different length scales provide information about the local mechanical properties of the minerals forming this meteorite: reduced Young's modulus, hardness, elastic recovery, and fracture toughness. Those tests are also useful to understand the potential to deflect threatening asteroids using a kinetic projectile. We found that the differences in mechanical properties between regions of the meteorite, which increase or reduce the efficiency of impacts, are not a result of compositional differences. A low mean particle size, attributed to repetitive shock, can increase hardness, while low porosity promotes a higher momentum multiplication. Momentum multiplication is the ratio between the change in momentum of a target due to an impact, and the momentum of the projectile, and, therefore higher values imply more efficient impacts. In the Chelyabinsk meteorite, the properties of the light-colored lithology materials facilitate obtaining higher momentum multiplication values, compared to the other regions described for this meteorite. Also, we found a low value of fracture toughness in the shock-melt veins of Chelyabinsk, which would promote the ejection of material after an impact and, therefore, increase the momentum multiplication. These results are relevant considering the growing interest in missions to test asteroid deflection, such as the recent collaboration between the European Space Agency and NASA, known as the Asteroid Impact and Deflection Assessment mission.

astro-ph.EP↗

arXiv2016

Ejecta Cloud from a Kinetic Impact on the Secondary of a Binary Asteroid: I. Mechanical Environment and Dynamic Model

An understanding of the post-impact dynamics of ejecta clouds are crucial to the planning of a kinetic impact mission to an asteroid, and also has great implications for the history of planetary formation. The purpose of this article to track the evolution of ejecta produced by AIDA mission, which targets for kinetic impact the secondary of near-Earth binary asteroid 65803 Didymos on 2022, and to feedback essential informations to AIDA's ongoing phase-A study. We present a detailed dynamic model for the simulation of an ejecta cloud from a binary asteroid that synthesizes all relevant forces based on a previous analysis of the mechanical environment. We apply our method to gain insight into the expected response of Didymos to the AIDA impact, including the subsequent evolution of debris and dust. The crater scaling relations from laboratory experiments are employed to approximate the distributions of ejecta mass and launching speed. The size composition of fragments is modeled with a power law fitted from observations of real asteroid surface. A full-scale demonstration is simulated using parameters specified by the mission. We report the results of the simulation, which include the computed spread of the ejecta cloud and the recorded history of ejecta accretion and escape. The violent period of the ejecta evolution is found to be short, and is followed by a stage where the remaining ejecta is gradually cleared. Solar radiation pressure proves to be efficient in cleaning dust-size ejecta, and the simulation results after two weeks shows that large debris on polar orbits (perpendicular to the binary orbital plane) has a survival advantage over smaller ejecta and ejecta that keep to low latitudes.

astro-ph.EP↗

arXiv2016

Dealing with Uncertainties in Asteroid Deflection Demonstration Missions: NEOTwIST

Deflection missions to near-Earth asteroids will encounter non-negligible uncertainties in the physical and orbital parameters of the target object. In order to reliably assess future impact threat mitigation operations such uncertainties have to be quantified and incorporated into the mission design. The implementation of deflection demonstration missions offers the great opportunity to test our current understanding of deflection relevant uncertainties and their consequences, e.g., regarding kinetic impacts on asteroid surfaces. In this contribution, we discuss the role of uncertainties in the NEOTwIST asteroid deflection demonstration concept, a low-cost kinetic impactor design elaborated in the framework of the NEOShield project. The aim of NEOTwIST is to change the spin state of a known and well characterized near-Earth object, in this case the asteroid (25143) Itokawa. Fast events such as the production of the impact crater and ejecta are studied via cube-sat chasers and a flyby vehicle. Long term changes, for instance, in the asteroid's spin and orbit, can be assessed using ground based observations. We find that such a mission can indeed provide valuable constraints on mitigation relevant parameters. Furthermore, the here proposed kinetic impact scenarios can be implemented within the next two decades without threatening Earth's safety.

astro-ph.EP↗