arXiv subjects

Patrick Meng

Publications and source records attributed to Patrick Meng.

5 recordsLinked to original sources

arXiv2026

Model Predictive Control of Tensegrity Robots via Contact-Aware Graph Neural Dynamics Model

Tensegrity robots offer lightweight, compliant mobility over challenging terrain but remain difficult to model and control due to complex contact-rich dynamics and partial observability. This work presents a model predictive path integral (MPPI) controller for a three-bar tensegrity robot driven by a learned graph neural network (GNN) dynamics model. This work first extends prior GNN-based models with a differentiable contact detection module. The extension allows the dynamics model to reason over non-horizontal planar terrains, obstacles, as well as self-collisions. Then, the learned dynamics model and the MPPI controller operate in a closed data-collection loop, iteratively improving model accuracy and control performance. This work further introduces a hybrid MPPI strategy that combines MPPI with turning motion primitives to improve maneuverability. Experiments are performed in MuJoCo across five navigation tasks, which include, wall obstacles, inclines, narrow corridors, low-clearance structures, and a composite 3D obstacle course. The experiments demonstrate that the hybrid MPPI controller operating over the learned GNN dynamics model improves predictive accuracy over a flat-ground baseline model and achieves superior navigation performance compared to $A^*$-based re-planning and MPPI-only variants. Results show that the contact-aware learned dynamics combined with the sampling-based model predictive control enable robust tensegrity navigation in complex, contact-rich environments.

cs.RO↗

arXiv2026

State and Trajectory Estimation of Tensegrity Robots via Factor Graphs and Chebyshev Polynomials

Tensegrity robots offer compliance and adaptability, but their nonlinear, and underconstrained dynamics make state estimation challenging. Reliable continuous-time estimation of all rigid links is crucial for closed-loop control, system identification, and machine learning; however, conventional methods often fall short. This paper proposes a two-stage approach for robust state or trajectory estimation (i.e., filtering or smoothing) of a cable-driven tensegrity robot. For online state estimation, this work introduces a factor-graph-based method, which fuses measurements from an RGB-D camera with on-board cable length sensors. To the best of the authors' knowledge, this is the first application of factor graphs in this domain. Factor graphs are a natural choice, as they exploit the robot's structural properties and provide effective sensor fusion solutions capable of handling nonlinearities in practice. Both the Mahalanobis distance-based clustering algorithm, used to handle noise, and the Chebyshev polynomial method, used to estimate the most probable velocities and intermediate states, are shown to perform well on simulated and real-world data, compared to an ICP-based algorithm. Results show that the approach provides high fidelity, continuous-time state and trajectory estimates for complex tensegrity robot motions.

cs.RO↗

arXiv2025

An Open-Source, Reproducible Tensegrity Robot that can Navigate Among Obstacles

Tensegrity robots, composed of rigid struts and elastic tendons, provide impact resistance, low mass, and adaptability to unstructured terrain. Their compliance and complex, coupled dynamics, however, present modeling and control challenges, hindering path planning and obstacle avoidance. This paper presents a complete, open-source, and reproducible system that enables navigation for a 3-bar tensegrity robot. The system comprises: (i) an inexpensive, open-source hardware design, and (ii) an integrated, open-source software stack for physics-based modeling, system identification, state estimation, path planning, and control. All hardware and software are publicly available at https://sites.google.com/view/tensegrity-navigation/. The proposed system tracks the robot's pose and executes collision-free paths to a specified goal among known obstacle locations. System robustness is demonstrated through experiments involving unmodeled environmental challenges, including a vertical drop, an incline, and granular media, culminating in an outdoor field demonstration. To validate reproducibility, experiments were conducted using robot instances at two different laboratories. This work provides the robotics community with a complete navigation system for a compliant, impact-resistant, and shape-morphing robot. This system is intended to serve as a springboard for advancing the navigation capabilities of other unconventional robotic platforms.

cs.RO↗

arXiv2024

The State of Robot Motion Generation

This paper reviews the large spectrum of methods for generating robot motion proposed over the 50 years of robotics research culminating in recent developments. It crosses the boundaries of methodologies, typically not surveyed together, from those that operate over explicit models to those that learn implicit ones. The paper discusses the current state-of-the-art as well as properties of varying methodologies, highlighting opportunities for integration.

cs.RO↗

arXiv2024

Tactile-based Object Retrieval From Granular Media

We introduce GEOTACT, the first robotic system capable of grasping and retrieving objects of potentially unknown shapes buried in a granular environment. While important in many applications, ranging from mining and exploration to search and rescue, this type of interaction with granular media is difficult due to the uncertainty stemming from visual occlusion and noisy contact signals. To address these challenges, we use a learning method relying exclusively on touch feedback, trained end-to-end with simulated sensor noise. We show that our problem formulation leads to the natural emergence of learned pushing behaviors that the manipulator uses to reduce uncertainty and funnel the object to a stable grasp despite spurious and noisy tactile readings. We introduce a training curriculum that bootstraps learning in simulated granular environments, enabling zero-shot transfer to real hardware. Despite being trained only on seven objects with primitive shapes, our method is shown to successfully retrieve 35 different objects, including rigid, deformable, and articulated objects with complex shapes. Videos and additional information can be found at https://jxu.ai/geotact.

cs.RO↗