arXiv Science⌕ Search

arXiv subjects

Pan-Pan Wang

Publications and source records attributed to Pan-Pan Wang.

At least 19 recordsLinked to original sources

Energy-flux noise induced by imperfections of the Gaussian beam in the Li-Baker HFGW detector

This paper investigates the energy-flux noise induced by imperfections of the Gaussian beam (GB) in the Li-Baker high-frequency gravitational wave (HFGW) detector. Modeling these imperfections with higher-order Laguerre-Gaussian (LG) beams, we analytically derive the resulting noise-to-signal ratio for both co- and cross-polarized $\mathrm{LG}_{nl}$ modes. It is found that higher-order co-polarized LG beams generate no tangential energy-flux noise at the optimal detection plane ($ϕ=π/2$ or $3π/2$), whereas higher-order cross-polarized LG beams introduce non-negligible noise. Specifically, for an individual higher-order cross-polarized $\mathrm{LG}_{nl}$ mode under our representative parameters, maintaining the noise-to-signal ratio below unity typically requires the power fraction to satisfy $σ_{nl}<10^{-46}$, with the $\mathrm{LG}_{01}$ mode imposing the most stringent constraint of $σ_{01}<6.0\times10^{-49}$. Monte Carlo simulations suggest that the total power fraction $σ_{\mathrm{total}}$ of multiple higher-order cross-polarized $\mathrm{LG}_{nl}$ modes needs to remain below $10^{-49}$. Consequently, we propose employing a polarization filter to retain only the co-polarized component of the GB adopted in the practical experiment, thereby suppressing the noise while preserving signal integrity. These results provide theoretical guidance for noise control in the Li-Baker HFGW detector.

gr-qc↗

Robustness-based selection of laser-locking architectures for time-delay interferometry in space-based gravitational-wave detectors

Space-based gravitational-wave detectors compare laser phases exchanged between distant spacecraft. Offset phase locking keeps beatnotes in the phasemeter band, while time-delay interferometry suppresses laser frequency noise. A disturbance of one reference can degrade the functions that depend on it, making robustness an additional criterion for choosing a phase-reference architecture. We introduce a quantitative comparison based on established cascade equations and percolation measures, with directed reference graphs and Erdős--Rényi support layers. Under uniform disturbances, the robustness score is determined by the reference-depth distribution. Under nonuniform disturbances and partial dependence, the connected-support criterion can select a different configuration from both the published depth and local-lock criteria and a reference-path baseline. The phase-locking comparisons favor configurations that limit accumulated degradation and supply downstream lasers from references retaining greater connected support. Paired finite-network calculations support these differences in preference. In a separate comparison of optical-input support for time-delay interferometry, requiring connected support on all spacecraft gives a different preference from requiring it on at least one spacecraft. These findings identify disturbance location, reference dependence and the required extent of support as factors that can change architecture selection. Within the stated statistical model, robustness rankings can complement phase-locking feasibility and interferometric performance when prioritizing configurations for space-based gravitational-wave detectors.

gr-qc↗

Gravitational-wave responses and noise correlations in geometric time-delay interferometry

Space-based gravitational-wave observations will probe the formation and growth of massive black holes and the evolution of compact binaries in the millihertz band. We develop a geometric-link representation of time-delay interferometry using six round-trip and six non-round-trip two-link blocks. Starting from the one-way Doppler response, we derive the elementary block responses and a dictionary that expresses 45 known second-generation combinations in terms of these blocks and residual one-way measurements. Representative Michelson and Relay observables admit compact forms, from which analytical sky-averaged tensor responses are obtained for a fixed, equal-arm constellation. We also derive the noise covariance of the blocks, retaining cross-spectra between blocks that share measurement streams. The resulting noise spectra agree with direct one-way assembly. We apply this formulation to a narrowband compact-binary signal in an equal-arm LISA instrument model. For the Relay example, neglecting the shared-link cross-spectrum changes the low-frequency noise scaling and overestimates the conditional Fisher uncertainties in amplitude or distance by factors of 10.71 at 1~mHz and 3.37 at 3~mHz.

gr-qc↗

Centerline Registration and Dimension-Dependent Optimization of Multistripe Torsion Balances for Nonminimal Lorentz Violation

Higher-dimension operators in the gravity sector of the Standard-Model Extension generate anisotropic interactions that grow rapidly at short range. Building on earlier striped-balance studies, we develop a finite-volume response and covariance-based optimization for the \(d=6\) and \(d=8\) pure-gravity sectors. We compare three, five, and seven stripes at \(d=8\) and left, centered, and right pattern registrations in both sectors, using horizontal and vertical stripe axes. Volume integration gives azimuth-dependent transfer matrices, while a Gaussian likelihood accounts for coefficient correlations and the unequal uncertainties of constant and sidereal amplitudes. Three stripes give the strongest aggregate \(d=8\) response. Reoptimizing two azimuths for each registration increases the noise-weighted \(D\)-optimal score by up to \(7.3\%\) at \(d=6\) and \(35.6\%\) at \(d=8\). The response matrices permit simultaneous fits of all 14 or 22 real coefficient components. The best marginalized \(1σ\) sensitivities reach \(10^{-9}\,\mathrm{m}^{2}\) and \(10^{-15}\,\mathrm{m}^{4}\), about two orders of magnitude beyond earlier inverse-square-law limits for the most favorable components. These results identify centerline registration as an additional route to improved short-range tests of Lorentz symmetry.

gr-qc↗

Clock-noise propagation and calibration for phase-locking configurations in space-based gravitational-wave detectors

In space-based gravitational-wave detectors, laser phase locking transfers the phase of weak received light to a local laser and maintains the interspacecraft heterodyne frequencies within the phasemeter bandwidth. Fluctuations of the onboard ultrastable oscillators introduce clock noise into these heterodyne phase measurements, requiring additional calibration in time-delay interferometry (TDI). Existing formulations based on six independently formed one-way measurements do not explicitly describe the common-reference clock structure of a master--slave phase-locking configuration. In this work, we formulate clock-noise propagation and calibration directly for this configuration. Starting from carrier and sideband readouts, we derive the clock-noise couplings and construct an ordered sideband-calibration rule. The rule retains noncommuting delays and applies to two-branch TDI combinations satisfying propagation and clock-coefficient closure. For mutually independent onboard clocks with identical fractional-frequency noise spectra, we compare matched realizations with and without phase locking. In the adopted frozen equal-arm model, 45 second-generation combinations with up to 16 links considered here have smaller clock-noise residuals in the phase-locking realization throughout 0.1--10~mHz, before final clock calibration. Numerical simulations of two representative 16-link combinations reproduce the analytical spectra and verify the predicted reduction and calibration. These results show that the phase-locking realizations reduce the clock-noise contribution before final calibration, while the cancellation of master-laser phase noise still relies on TDI.

gr-qc↗

Clock-noise subtraction in geometric time-delay interferometry for space-based gravitational-wave parameter estimation

Millihertz gravitational-wave observations with space-based interferometers require time-delay interferometry (TDI) observables whose residual instrumental noise is sufficiently controlled for both detection and parameter inference. Although TDI suppresses laser phase noise in unequal and time-dependent arms, clock jitter from onboard ultra-stable oscillators can remain above the secondary-noise floor and bias the effective noise weighting used in data analysis. We formulate a clock-noise subtraction scheme directly in the geometric-TDI framework. The construction introduces generalized clock-noise observables for the four space-time link structures that arise when both delay and time-advance operators are allowed. This makes the clock-noise residual algebraically parallel to the laser-noise residual and yields explicit subtraction terms for arbitrary two-path geometric TDI observables. We illustrate the method with representative first- and second-generation geometric TDI combinations, and test it with time-domain simulations using LISA-like orbits and noise levels. For a modified second-generation U-type observable, the subtraction suppresses the clock-noise residual below the signal region, restores the expected sensitivity to a monochromatic source, and improves the Fisher and Markov-chain Monte Carlo parameter constraints on the source amplitude, frequency and phase. These results show that clock-noise calibration is a necessary component of precision data analysis for future space-based gravitational-wave detectors.

gr-qc↗

Fundamental Physics and Cosmology with TianQin

The exploration of the surrounding world and the universe is an important theme in the legacy of humankind. The detection of gravitational waves is adding a new dimension to this grand effort. What are the fundamental physical laws governing the dynamics of the universe? What is the fundamental composition of the universe? How has the universe evolved in the past and how will it evolve in the future? These are the basic questions that press for answers. The space-based gravitational wave detector TianQin will tune in to gravitational waves in the millihertz frequency range ($10^{-4} \sim 1$ Hz, to be specific), opening a new gravitational wave spectrum window to explore many of the previously hidden sectors of the universe. TianQin will discover many astrophysical systems, populating the universe at different redshifts: some will be of new types that have never been detected before, some will have very high signal-to-noise ratios, and some will have very high parameter estimation precision. The plethora of information collected will bring us to new fronts on which to search for the breaking points of general relativity, the possible violation of established physical laws, the signature of possible new gravitational physics and new fundamental fields, and to improve our knowledge on the expansion history of the universe. In this white paper, we highlight the advances that TianQin can bring to fundamental physics and cosmology.

gr-qc↗

The Impact of Dark Matter on Gravitational Wave Detection by Space-based Interferometers

The existence of dark matter is supported by multiple astrophysical observations, yet its particle nature remains unknown. The development of gravitational wave astronomy, especially with future space-based detectors such as LISA, provides new opportunities to study the interactions between dark matter and compact-object systems. This review summarizes the main dark matter candidates and their macroscopic distributions, and highlights three mechanisms through which dark matter can affect gravitational wave observations: (1) modifications to compact-object orbits and the dynamics of systems such as extreme mass-ratio inspirals, including dark matter spikes, dynamical friction, and potential perturbations; (2) gravitational lensing effects induced by the spatial distribution of dark matter, altering waveform amplitudes and phases; and (3) direct couplings between ultralight dark matter fields and detectors. As low-frequency gravitational wave detection techniques are proposed and continue to develop, these effects may offer a novel avenue for probing the properties of dark matter, and combining precise waveform modeling with multi-messenger observations could reveal insights into its microscopic structure.

astro-ph.CO↗

On angular dependent response to gravitational-wave signals for time-delay interferometry combinations

Space-based gravitational wave (GW) detectors are designed for wave sources in the millihertz band with different locations and orientations. Time-delay interferometry (TDI) technique is an indispensable ingredient in space-borne GW detection that effectively suppresses the laser phase noise. The abundant TDI solutions derived in the literature also feature distinct angular-dependent sensitivities. Because a GW source's angular location is unknown prior to the signals' detection, a solid-angle average is often performed when analyzing the sensitivity function of a given TDI combination. The present study explores the angular dependence of the detector's sensitivity. This detail is relevant, because once the initial detection is achieved, the source's location can be extracted and used to provide information on a refined TDI combination tailored for the specific GW source. As the TDI technique is a post-processing algorithm, such a procedure can be implemented in practice. We evaluate the angular dependence of the detector's response function to the GW signals for different TDI combinations as a function of the orientation angles. Moreover, we classify the response functions into seven categories at the low-frequency limit, leveraging the characteristics of the underlying geometrical TDI combinations. By further averaging out the azimuthal angle $ϕ_D$ in the detector's plane, the main features of the resulting response functions and their zenithal dependence with respect to the GW source are scrutinized. The findings presented in this work provide pertinent insights for ongoing space-borne detector programs.

gr-qc↗

Progress of the TianQin project

TianQin is a future space-based gravitational wave observatory targeting the frequency window of $10^{-4}$ Hz $\sim 1$ Hz. A large variety of gravitational wave sources are expected in this frequency band, including the merger of massive black hole binaries, the inspiral of extreme/intermediate mass ratio systems, stellar-mass black hole binaries, Galactic compact binaries, and so on. TianQin will consist of three Earth orbiting satellites on nearly identical orbits with orbital radii of about $10^5$ km. The satellites will form a normal triangle constellation whose plane is nearly perpendicular to the ecliptic plane. The TianQin project has been progressing smoothly following the ``0123" technology roadmap. In step ``0", the TianQin laser ranging station has been constructed and it has successfully ranged to all the five retro-reflectors on the Moon. In step ``1", the drag-free control technology has been tested and demonstrated using the TianQin-1 satellite. In step ``2", the inter-satellite laser interferometry technology will be tested using the pair of TianQin-2 satellites. The TianQin-2 mission has been officially approved and the satellites will be launched around 2026. In step ``3", i.e., the TianQin-3 mission, three identical satellites will be launched around 2035 to form the space-based gravitational wave detector, TianQin, and to start gravitational wave detection in space.

gr-qc↗

New results on the dynamics of critical collapse

We study the dynamics of the critical collapse of a spherically symmetric scalar field. Approximate analytic expressions for the metric functions and matter field in the large-radius region are obtained. In the central region, owing to the boundary conditions, the equation of motion for the scalar field is reduced to the flat-spacetime form.

gr-qc↗

Revisitation of algebraic approach for time delay interferometry

Time Delay Interferometry (TDI) is often utilized in the data pre-processing of space-based gravitational wave detectors, primarily for suppressing laser frequency noise. About twenty years ago, assuming armlengths remain constant over time, researchers presented comprehensive mathematical descriptions for the first-generation and modified first-generation TDI. However, maintaining a steady distance between satellites is pragmatically challenging. Hence, the operator equation that neutralizes laser frequency noise, though provided, was deemed difficult to resolve. In this paper, we solve this equation in the context of a non-static scenario where distances between spacecrafts vary over time. Surprisingly, contrary to what previous researchers thought, the study reveals that the equation has only the zero solution, which suggests that no nonzero TDI combination can entirely suppress laser frequency noise under time-varying armlengths. This necessitates the persistent search for second-generation TDI combinations through alternative methods besides directly solving the operator equation. We establish the connections between TDI combinations of different generations and propose a search strategy for finding higher-generation TDI combinations by using generators of lower-generation TDI. The findings contribute to the ongoing discussion on gravitational waves and provide a novel insight into the hurdles faced in space-based gravitational wave detection.

physics.ins-det↗

On second-order combinatorial algebraic time-delay interferometry

Inspired by the combinatorial algebraic approach proposed by Dhurandhar {\it et al.}, we propose two novel classes of second-generation time-delay interferometry (TDI) solutions and their further generalization. The primary strategy of the algorithm is to enumerate specific types of residual laser frequency noise associated with second-order commutators in products of time-displacement operators. The derivations are based on analyzing the delay time residual when expanded in time derivatives of the armlengths order by order. It is observed that the solutions obtained by such a scheme are primarily captured by the geometric TDI approach and therefore possess an intuitive interpretation. Nonetheless, the fully-symmetric Sagnac and Sagnac-inspired combinations inherit the properties from the original algebraic approach, and subsequently lie outside of the scope of geometric TDI. We explicitly show that novel solutions, distinct from existing ones in terms of both algebraic structure and sensitivity curve, are encountered. Moreover, at its lowest order, the solution is furnished by commutators of relatively compact form. Besides the original Michelson-type solution, we elaborate on other types of solutions such as the Monitor, Beacon, Relay, Sagnac, fully-symmetric Sagnac, and Sagnac-inspired ones. The average response functions, residual noise power spectral density, and sensitivity curves are evaluated for the obtained solutions. Also, the relations between the present scheme and other existing algorithms are discussed.

astro-ph.IM↗

Testing the polarization of gravitational wave background with LISA-TianQin network

While general relativity predicts only two tensor modes for gravitational wave polarization, general metric theories of gravity allows up to four additional modes, including two vector and two scalar modes. Observing the polarization modes of gravitational waves could provide a direct test of the modified gravity. The stochastic gravitational wave background (SGWB), which may be detected by space-based laser-interferometric detectors at design sensitivity, will provide an opportunity to directly measure alternative polarization. In this paper, we investigate the performance of the LISA-TianQin network for detecting alternative polarizations of stochastic backgrounds, and propose a method to separate different polarization modes. First, we generalize the small antenna approximation to compute the overlap reduction functions for SGWB with arbitrary polarization, which is suitable for any time-delay interferometry combination. Then we analyze the detection capability of LISA-TianQin for SGWB with different polarizations. Based on the LISA-TianQin orbital characteristics, we propose a method to distinguish different polarization modes from their mixed data. Compared with ground-based detectors, the LISA-TianQin network is more capable of resolving polarizations of SGWB. In particular, the LISA-TianQin network has the potential to resolve two scalar modes that ground-based detectors cannot.

gr-qc↗

Arm locking in conjunction with time-delay interferometry

A crucial challenge to the ongoing endeavor of spaceborne gravitational wave (GW) detection resides in the laser phase noise, typically 7 to 8 orders of magnitude above the inevitable noise. The arm locking technique was proposed to suppress the noise in pre-stabilized laser beams. Based on the feedback control theory, it is implemented by appropriate design of the signal routing architecture, particularly the controllers' transfer functions. Theoretically and experimentally, the technique has been demonstrated to be capable of suppressing the laser phase noise by approximately 2-4 orders of magnitude while taking into account various aspects such as the gain and distribution of nulls in the Bode plot and the laser frequency pulling associated with the Doppler frequency subtraction. Consequently, the resultant noise floor is composed of the sources attributed to the clock jitter, optical bench motion, test mass fluctuations, shot-noise phase fluctuations at the photodetectors, whereas the magnitudes of these noises largely remain unchanged during the process. Besides, the original GW signals are deformed through the arm-locking control loop and therefore bear specific features governed by the associated arm-locking scheme. Nonetheless, the remaining laser phase noise from the arm-locking feedback routing settles within the capability threshold of the time-delay interferometry (TDI). In this regard, it is generally understood that the output of arm locking furnishes the input of TDI, through which the residual noise is further reduced to the desired level at a post-processing stage. In this work, we investigate the specific schemes regarding how the arm locking output is processed further by the TDI algorithm. Specific forms of the TDI combinations are derived in accordance with suppressed laser phase noise and deformed signals of GW.

gr-qc↗

A combinatorial algebraic approach for the modified second-generation time-delay interferometry

We generalize the combinatorial algebraic approach first proposed by Dhurandhar et al. to construct various classes of modified second-generation time-delay interferometry (TDI) solutions. The main idea behind the algorithm is to enumerate, in a given order, a specific type of commutator between two monomials defined by the products of particular time-displacement operators. On the one hand, the above commutators can be systematically rewritten as the elements of a left ideal, defined by the l.h.s. of the relevant equation for the TDI solution. On the other hand, these commutators are shown to vanish if we only keep up the first-order contributions regarding the rate of change of armlengths. In other words, each commutator furnishes a valid TDI solution pertaining to the given type of modified second-generation combinations. In this work, the original algorithm, which only involves time-delay operators, is extended by introducing the time-advance ones and then utilized to seek solutions of the Beacon, Relay, Monitor, Sagnac, and fully symmetric Sagnac types. We discuss the relation between the present scheme's solutions and those obtained by the geometric TDI approach, a well-known method of exhaustion of virtual optical paths. In particular, we report the results on novel Sagnac-inspired solutions that cannot be straightforwardly obtained using the geometric TDI algorithm. The average response functions, floor noise power spectral densities, and sensitivity functions are evaluated for the obtained solutions.

astro-ph.IM↗

Full analytic expression of overlap reduction function for gravitational wave background with pulsar timing arrays

Pulsar timing array (PTA) is expected to detect gravitational wave background (GWB) in the nanohertz band within the next decade. This provides an opportunity to test the gravity theory and cosmology. A typical data analysis method to detect GWB is cross-correlation analysis. The overlap reduction function (ORF) plays an important role in the correlation data analysis of GWB. The present approach to dealing with the intricate integration in ORF is to use short-wave approximation to drop out the tricky terms. In this paper, we provide the full analytic expression of the ORF for PTA without any approximation for all possible polarizations allowed by modifications of general relativity. Compared with the numerical simulation and short-wave approximation, our results are more efficient and widely applicable. Especially for the scalar-longitudinal mode where the short-wave approximation is not available, our analytical expression is particularly significant.

gr-qc↗

Geometric approach for the modified second generation time delay interferometry

The time delay interferometry (TDI) is an algorithm proposed to suppress the laser frequency noise in space-borne gravitational wave detectors. As a post-processing technique, it is implemented by constructing a virtual equal arm interferometer through an appropriate combination of the time-shifted data streams. Such an approach is tailored to the intrinsic feature of the space-based gravitational wave detection, namely, the distances between spacecraft are governed by the orbit dynamics and thus can not be held constant. Among different implementations, the geometric TDI was introduced as a method of exhaustion to evaluate the second-generation TDI combinations. The applications of the algebraic approach based on computational algebraic geometry, on the other hand, are mostly restricted to the first and the modified first-generation TDI. Besides, geometric TDI furnishes an intuitive physical interpretation about the synthesis of the virtual optical paths. In this paper, the geometric TDI is utilized to investigate the modified second-generation TDI combinations in conjunction with a ternary search algorithm. The distinction between the second-generation and modified second-generation TDI solutions is elaborated regarding the rate of change of the arm lengths with respect to the opposite cyclic directions. For the sixteen-link combinations, forty second-generation TDI solutions are recovered, among which nine of them are identified as the modified second-generation ones.

gr-qc↗