arXiv subjects

Pan Tang

Publications and source records attributed to Pan Tang.

At least 19 recordsLinked to original sources

arXiv2026

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

eess.SP↗

arXiv2026

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

eess.SP↗

arXiv2026

New Mid-Band (FR3, 6-24 GHz) XL-MIMO for 6G: Channel Modeling, Algorithm Evaluation, and Field Trials

The new mid-band (FR3, 6-24 GHz) spectrum is expected to play an important role in future 6G networks by providing a favorable balance among coverage, capacity, and deployment feasibility. Meanwhile, extremely large-scale multiple-input multiple-output (XL-MIMO) has emerged as a key enabling technology to exploit the propagation and spatial multiplexing potential of these frequency bands. Firstly, this paper provides a systematic review of spectrum allocation and standardization activities for new mid-band spectrum, together with the 6G spectrum planning strategies of countries and regions. Secondly, the wideband massive MIMO channel sounder is also introduced, which is specially developed for channel measurements of new mid-band with over a thousand elements. Thirdly, propagation characteristics and channel modeling approaches of four representative XL-MIMO architectures, including co-located, cell-free, and intelligent XL-MIMO, are comprehensively reviewed and analyzed, with particular emphasis on near-field propagation, spatial non-stationarity, and capacity performance. Then, recent advances in channel estimation, beamforming, and artificial-intelligence-assisted signal processing are summarized. In addition, the performance of new mid-band XL-MIMO systems equipped with 1536 and 768 antenna elements is comparatively evaluated. Finally, real communication environment prototype system field trials conducted in the Upper 6 GHz (U6GHz) band are used to investigate practical system performance under realistic deployment conditions. The results indicate that the target signal-to-noise ratio is a critical factor affecting XL-MIMO performance in the U6GHz band.

eess.SP↗

arXiv2026

A Simultaneous Clustering and Tracking Algorithm for Capturing Cluster-Level Spatial Consistency in 6G Wireless Channels

Spatial consistency is a fundamental physical property of wireless channels that reflects the smooth evolution of the channel between spatial locations. At the cluster level, it requires similar multipath components (MPCs) remain grouped into the same clusters as the transceivers move, enabling consistent cluster tracking. Cluster-level spatial consistency is essential for realistic cluster-based channel models, especially for potential 6G techniques such as massive MIMO, integrated sensing and communication, and terahertz (THz) communication. However, existing clustering and tracking methods do not fully exploit spatial correlations of MPCs. In tracking-after-clustering, clustering and tracking are decoupled, while joint clustering-and-tracking mainly relies on cluster centers from the previous snapshot. In this work, we propose a Mahalanobis-distance-based simultaneous clustering and tracking (MD-SCT) algorithm to capture the joint distribution of clustered MPCs in the delay, angular and spatial domains. Under Mahalanobis distance, MPCs in successive snapshots are associated with existing clusters, thereby inherently tracking while clustering. The algorithm is further applied in the sub-THz band. Performance is evaluated using mean square successive difference and gradient change rate. The results demonstrate that the proposed algorithm yields smoother cluster evolution. This improves the reliability of clustered channels for spatial consistency modeling in 6G.

eess.SP↗

arXiv2026

Measurement-Based Characterization and Statistical Modeling of 6G Urban Low-Altitude A2G Channels across FR1 and FR3

Unmanned aerial vehicle (UAV) communications have been recognized as a key component of future sixth-generation (6G) space-air-ground-sea integrated networks. Accurate characterization and modeling of air-to-ground (A2G) channels are essential for the design and optimization of low-altitude communication systems. This paper presents a wideband A2G channel measurement campaign in an urban environment at 2.85 and 4.6~GHz in FR1 and 7.25~GHz in the FR3 frequency band, each with a bandwidth of 250~MHz. To enable reliable line-of-sight (LoS) and non-line-of-sight (NLoS) propagation state identification, a weakly supervised method is developed by fusing geometric priors, channel features, and spatial consistency constraints. Furthermore, based on the measured data, A2G channel characteristics are extracted and analyzed under LoS/NLoS conditions across different frequency bands, including path loss (PL), shadow fading (SF), power delay profile, root-mean-square delay spread (RMS-DS), and Rician $K$-factor. The results show that the close-in model fits the measured PL more accurately than the 3GPP reference model, and that NLoS propagation leads to larger path loss exponents and stronger SF than LoS propagation. For channel delay characteristics, higher-frequency channels exhibit fewer effective MPCs and weaker delay dispersion, indicating increased channel sparsity. Specifically, the mean RMS-DS under LoS conditions decreases from 93.11 to 46.84~ns, while the mean Rician $K$-factor increases from 9.16 to 12.88~dB. The statistical results further show that the RMS-DS and the Rician $K$-factor can be well characterized by lognormal and normal distributions, respectively. Moreover, the movement of the receiver in a complex scattering environment intensifies the spatial non-stationarity of the A2G channel.

eess.SP↗

arXiv2026

Measurement-Based Analysis of Outdoor Massive MIMO Channel Characteristics over FR3 Frequency Band

The Frequency Range 3 (FR3) band is attracting increasing attention due to limited lower-frequency spectrum and growing mobile communication demand. This study experimentally investigates channel characteristics in Urban Macro (UMa) scenarios at 8 GHz and 15 GHz using a large-scale MIMO platform with time-division multiplexing (TDM). Key parameters, including root mean square (RMS) delay spread (DS) and angular spread (AS), were extracted and compared with 3rd Generation Partnership Project (3GPP) TR 38.901. Results reveal clear frequency-dependent behaviors: RMS delay spread remains nearly constant under line of sight (LOS) but decreases from 8 GHz to 15 GHz in non-line of sight (NLOS), indicating reduced multipath dispersion at higher frequencies. Both azimuthal spreads (including ASA and ASD) and elevation spreads (including ESA and ESD) exhibit a corresponding decrease with increasing frequency, demonstrating a consistent trend towards more directional propagation across all angular domains. Capacity analysis indicates that the 15 GHz channel slightly outperforms 8 GHz in both LOS and NLOS scenarios due to more concentrated multipath energy and larger dominant singular values. Higher frequencies exhibit greater directionality, whereas lower frequencies provide broader multipath distributions and more stable performance, offering valuable guidance for multi-band MIMO modeling and 6G system design.

eess.SP↗

arXiv2026

Movable Antenna-Aided Secure LEO Satellite Networks: Joint Antenna Position and Beamforming Optimization

The broadcast characteristics of sixth-generation (6G) low-earth orbit (LEO) satellite communications raise serious security issues. Movable antenna (MA) technology offers a promising physical layer security (PLS) solution by flexibly reconfiguring antenna positions to exploit additional spatial degrees of freedom. However, in highly dense LEO satellite constellations, the legitimate satellite and potential eavesdropping satellites may exhibit small angular separations, which poses significant challenges for the design of secure transmission schemes. To address this challenge, this paper proposes an MA-assisted secure transmission scheme for time-varying LEO satellite communications, where a ground station equipped with an MA array communicates with a serving satellite, while the other visible satellites are regarded as potential eavesdroppers. We maximize the average secrecy rate by jointly optimizing the transmit beamforming and MA positions. An alternating optimization (AO) framework is developed, where semidefinite relaxation is adopted for the beamforming optimization subproblem, while high-accuracy successive convex approximation (SCA) and low-complexity differential evolution (DE) algorithms are proposed for the MA position optimization subproblem. Numerical results demonstrate that the proposed MA-assisted LEO secure transmission scheme consistently achieves superior performance compared to the conventional fixed-position antenna scheme.

cs.IT↗

arXiv2026

Measurement-Based Massive MIMO Channel Characterization and Performance Evaluation at FR3 (8 and 15 GHz) Under Equal Physical Aperture

With the push toward 6G commercialization, Frequency Range 3 (FR3) bands, specifically 7.125-8.4 GHz and 14.8-15.3 GHz, have become focal points for achieving wide-area, high-capacity coverage. However, practical deployment is often limited by the physical aperture constraints of base station antennas. This study conducts comprehensive measurements in Urban Macro (UMa) scenarios using a unified dual-band sounding platform to evaluate channel characteristics and system performance under the strict constraint of "equal physical array aperture." The results indicate that higher frequency bands exhibit increased sparsity in both delay and spatial domains. Regarding coverage, while the 15 GHz band can theoretically accommodate four times the number of antenna elements (128 elements) within the same area to compensate for path loss, empirical data reveals a residual coverage deficit of approximately 3.0 dB at cell edges compared to the 8 GHz baseline. In contrast, the 15 GHz band excels in capacity; the increased element count effectively overcomes channel sparsity, resulting in spectral efficiency (SE) that significantly outperforms the 8 GHz band. Furthermore, the research demonstrates that for a fixed number of elements, system performance remains largely insensitive to specific array topologies (e.g., 1x32, 2x16, or 4x8). Ultimately, FR3 system performance is dictated by the trade-off between propagation characteristics and hardware-enabled gain. These findings provide a theoretical foundation for spatial-domain design and help address engineering challenges for 6G base station implementation

eess.SP↗

arXiv2026

Toroidal helical pulses

Toroidal topologies and helicity are pervasive in nature and hold basic importance in scientific research. In particular, the interplay between these features gives rise to fascinating toroidal helical electromagnetic excitations. Here, we present a theoretical framework and experimental realization to introduce a family of toroidal helical pulses, exploring the intersection of the helicity and propagating toroidal modes. For this purpose, we propose a configuration combining a coaxial horn emitter and an equiangular spiral grating to directly generate such single-cycle pulses. In addition to their inherent non-transverse toroidal topology and space-time nonseparability, such pulses also possess controllable helicity. This work gives rise to a helical version of propagating toroidal electrodynamics, thereby paving the way for advanced applications, such as nontrivial light-matter interactions and data transfer.

physics.optics↗

arXiv2026

A Tutorial on 3GPP Rel-19 Channel Modeling for 6G FR3 (7-24 GHz): From Standard Specification to Simulation Implementation

The upper-mid band (7-24 GHz), designated as Frequency Range 3 (FR3), has emerged as a definitive ``golden band" for 6G networks, strategically balancing the wide coverage of sub-6 GHz with the high capacity of mmWave. To compensate for the severe path loss inherent to this band, the deployment of Extremely Large Aperture Arrays (ELAA) is indispensable. However, the legacy 3GPP TR 38.901 channel model faces critical validity challenges when applied to 6G FR3, stemming from both the distinct propagation characteristics of this frequency band and the fundamental physical paradigm shift induced by ELAA. In response, 3GPP Release 19 (Rel-19) has validated the model through extensive new measurements and introduced significant enhancements. This tutorial provides a comprehensive guide to the Rel-19 channel model for 6G FR3, bridging the gap between standardization specifications and practical simulation implementation. First, we provide a high-level overview of the fundamental principles of the 3GPP channel modeling framework. Second, we detail the specific enhancements and modifications introduced in Rel-19, including the rationale behind the new Suburban Macro (SMa) scenario, the mathematical modeling of ELAA-driven features such as near-field and spatial non-stationarity, and the recalibration of large-scale parameters. Overall, this tutorial serves as an essential guide for researchers and engineers to master the latest 3GPP channel modeling methodology, laying a solid foundation for the accurate design and performance evaluation of future 6G FR3 networks.

eess.SP↗

arXiv2025

Cell-free versus Conventional Massive MIMO : An Analysis of Channel Capacity based on Channel Measurement in the FR3 Band

Cell-free massive MIMO (CF-mMIMO) has emerged as a promising technology for next generation wireless systems, combining the benefits of distributed antenna systems (DAS) and traditional MIMO technology. In this work, we present the first extensive channel measurements for CF-mMIMO in the mid-band (FR3, 6-24 GHz), using a virtual widely distributed antenna array comprising 512 elements in the urban Macrocell (UMa) environment. Based on the measurement data, this paper compares the channel capacity of CF-mMIMO and Conventional mMIMO under both line-of-sight (LOS) and non-line-of-sight (NLOS) conditions across a range of signal-to-noise ratios (SNRs). We then analyze how channel capacity varies with Rx positions from the perspectives of the full array and of individual subarrays. Finally, we conclude that the 64-element array configuration yields the greatest advantage in channel capacity for CF-mMIMO in the measurement environment considered, with gains of 14.02\% under LOS and 24.61\% under NLOS conditions. This in-depth analysis of channel capacity in the FR3 band provides critical insights for optimizing CF-mMIMO systems in next generation wireless networks.

eess.SP↗

arXiv2025

Distributed Spatial-Temporal Trajectory Optimization for Unmanned-Aerial-Vehicle Swarm

Swarm trajectory optimization problems are a well-recognized class of multi-agent optimal control problems with strong nonlinearity. However, the heuristic nature of needing to set the final time for agents beforehand and the time-consuming limitation of the significant number of iterations prohibit the application of existing methods to large-scale swarm of Unmanned Aerial Vehicles (UAVs) in practice. In this paper, we propose a spatial-temporal trajectory optimization framework that accomplishes multi-UAV consensus based on the Alternating Direction Multiplier Method (ADMM) and uses Differential Dynamic Programming (DDP) for fast local planning of individual UAVs. The introduced framework is a two-level architecture that employs Parameterized DDP (PDDP) as the trajectory optimizer for each UAV, and ADMM to satisfy the local constraints and accomplish the spatial-temporal parameter consensus among all UAVs. This results in a fully distributed algorithm called Distributed Parameterized DDP (D-PDDP). In addition, an adaptive tuning criterion based on the spectral gradient method for the penalty parameter is proposed to reduce the number of algorithmic iterations. Several simulation examples are presented to verify the effectiveness of the proposed algorithm.

cs.RO↗

arXiv2025

Affine Frequency Division Multiplexing for Communication and Channel Sounding: Requirements, Challenges, and Key Technologies

Channel models are crucial for theoretical analysis, performance evaluation, and deployment of wireless communication systems. Traditional channel sounding systems are insufficient for handling the dynamic changes of channels in the next-generation space-air-ground-sea integrated networks (SAGSIN), which often results in outdated channel models that fail to provide reliable prior information for communication systems. To address this challenge, this paper proposes an integrated channel sounding and communication (ICSC) method as a practical solution. Unlike orthogonal frequency division multiplexing, affine frequency division multiplexing (AFDM) provides a full delay-Doppler representation of the channel, achieving optimal diversity in time-frequency doubly dispersive channels and effectively addressing the aforementioned challenges. Thus, we investigate the fundamental principles of AFDM, showing how it enables simultaneous communication and channel sounding, and explore key performance metrics for both functionalities. We also clarify the distinction and relationship between channel sounding, estimation, tracking and scatterer sensing. Additionally, several potential application scenarios for AFDM-ICSC are explored. Finally, we highlight the key challenges in implementing AFDM-ICSC, outline future research directions, and provide valuable insights for the continued development of this technology.

eess.SP↗

arXiv2025

MicroRCA-Agent: Microservice Root Cause Analysis Method Based on Large Language Model Agents

This paper presents MicroRCA-Agent, an innovative solution for microservice root cause analysis based on large language model agents, which constructs an intelligent fault root cause localization system with multimodal data fusion. The technical innovations are embodied in three key aspects: First, we combine the pre-trained Drain log parsing algorithm with multi-level data filtering mechanism to efficiently compress massive logs into high-quality fault features. Second, we employ a dual anomaly detection approach that integrates Isolation Forest unsupervised learning algorithms with status code validation to achieve comprehensive trace anomaly identification. Third, we design a statistical symmetry ratio filtering mechanism coupled with a two-stage LLM analysis strategy to enable full-stack phenomenon summarization across node-service-pod hierarchies. The multimodal root cause analysis module leverages carefully designed cross-modal prompts to deeply integrate multimodal anomaly information, fully exploiting the cross-modal understanding and logical reasoning capabilities of large language models to generate structured analysis results encompassing fault components, root cause descriptions, and reasoning trace. Comprehensive ablation studies validate the complementary value of each modal data and the effectiveness of the system architecture. The proposed solution demonstrates superior performance in complex microservice fault scenarios, achieving a final score of 50.71. The code has been released at: https://github.com/tangpan360/MicroRCA-Agent.

cs.AI↗

arXiv2025

Far-Field vs. Near-Field Propagation Channels: Key Differences and Impact on 6G XL-MIMO Performance Evaluation

Extremely large-scale multiple-input multiple-output (XL-MIMO) is regarded as a promising technology for next-generation communication systems. However, this will expand the near-field (NF) range, rendering more users more likely to be located in the NF region. In this paper, we aim to answer two questions: What are the new characteristics of the NF channel? Is it necessary to develop new transciver techniques to maintain system performance within the NF region? To this end, we first review current NF channel models and analyze the differences between the existing 3GPP TR 38.901 channel model and the NF channel model, including the spherical wavefront and spatially non-stationarity. Then, we provide examples on how these differences affect the XL-MIMO system performance in terms of beamforming gain and achievable rate. Simulation results demonstrate that, when using far-field (FF) technique under the NF channel, the maximum normalized beam gain loss is less than 3 dB for most users in the NF region defined by Rayleigh distance. Moreover, the achievable rate loss of beam training is less than 3% compared to that realized by NF technique. Finally, we demonstrate the necessity of employing NF transceiver techniques based on simulation results.

eess.SP↗

arXiv2025

Near-Field Propagation and Spatial Non-Stationarity Channel Model for 6-24 GHz (FR3) Extremely Large-Scale MIMO: Adopted by 3GPP for 6G

Next generation cellular deployments are expected to exploit the 6-24 GHz frequency range 3 (FR3) and extremely large-scale multiple-input multiple-output (XL-MIMO) to enable ultra-high data rates and reliability. However, the significantly enlarged antenna apertures and higher carrier frequencies render the far-field and spatial stationarity assumptions in the existing 3rd generation partnership project (3GPP) channel models invalid, giving rise to new features such as near-field propagation and spatial non-stationarity (SNS). Despite extensive prior research, incorporating these new features within the standardized channel modeling framework remains an open issue. To address this, this paper presents a channel modeling framework for XL-MIMO systems that incorporates both near-field and SNS features, adopted by 3GPP. For the near-field propagation feature, the framework models the distances from the base station (BS) and user equipment to the spherical-wave sources associated with clusters. These distances are used to characterize element-wise variations of path parameters, such as nonlinear changes in phase and angle. To capture the effect of SNS at the BS side, a stochastic-based approach is proposed to model SNS caused by incomplete scattering, by establishing power attenuation factors from visibility probability and visibility region to characterize antenna element-wise path power variation. In addition, a physical blocker-based approach is introduced to model SNS effects caused by partial blockage. Finally, a simulation framework for near-field and SNS is developed within the structure of the existing 3GPP channel model. Performance evaluations demonstrate that the near-field model captures higher channel capacity potential compared to the far-field model. Coupling loss results indicate that SNS leads to more pronounced propagation fading relative to the spatial stationary model.

eess.SP↗

arXiv2025

Theoretical Analysis of Near-Field MIMO Channel Capacity and Mid-Band Experimental Validation

With the increase of multiple-input-multiple-output (MIMO) array size and carrier frequency, near-field MIMO communications will become crucial in 6G wireless networks. Due to the increase of MIMO near-field range, the research of near-field MIMO capacity has aroused wide interest. In this paper, we focus on the theoretical analysis and empirical study of near-field MIMO capacity. First, the near-field channel model is characterized from the electromagnetic information perspective. Second, with the uniform planar array (UPA), the channel capacity based on effective degree of freedom (EDoF) is analyzed theoretically, and the closed-form analytical expressions are derived in detail. Finally, based on the numerical verification of near-field channel measurement experiment at 13 GHz band, we reveal that the channel capacity of UPA-type MIMO systems decreases continuously with the communication distance increasing. It can be observed that the near-field channel capacity gain is relatively obvious when large-scale MIMO is adopted at both receiving and transmitter ends, but the near-field channel capacity gain may be limited in the actual communication system with the small antenna array at receiving end. This work will give some reference to the near-field communication systems.

eess.SP↗

arXiv2025

Empirical Study on Near-Field and Spatial Non-Stationarity Modeling for THz XL-MIMO Channel in Indoor Scenario

Terahertz (THz) extremely large-scale MIMO (XL-MIMO) is considered a key enabling technology for 6G and beyond due to its advantages such as wide bandwidth and high beam gain. As the frequency and array size increase, users are more likely to fall within the near-field (NF) region, where the far-field plane-wave assumption no longer holds. This also introduces spatial non-stationarity (SnS), as different antenna elements observe distinct multipath characteristics. Therefore, this paper proposes a THz XL-MIMO channel model that accounts for both NF propagation and SnS, validated using channel measurement data. In this work, we first conduct THz XL-MIMO channel measurements at 100 GHz and 132 GHz using 301- and 531-element ULAs in indoor environments, revealing pronounced NF effects characterized by nonlinear inter-element phase variations, as well as element-dependent delay and angle shifts. Moreover, the SnS phenomenon is observed, arising not only from blockage but also from inconsistent reflection or scattering. Based on these observations, a hybrid NF channel modeling approach combining the scatterer-excited point-source model and the specular reflection model is proposed to capture nonlinear phase variation. For SnS modeling, amplitude attenuation factors (AAFs) are introduced to characterize the continuous variation of path power across the array. By analyzing the statistical distribution and spatial autocorrelation properties of AAFs, a statistical rank-matching-based method is proposed for their generation. Finally, the model is validated using measured data. Evaluation across metrics such as entropy capacity, condition number, spatial correlation, channel gain, Rician K-factor, and RMS delay spread confirms that the proposed model closely aligns with measurements and effectively characterizes the essential features of THz XL-MIMO channels.

eess.SP↗