arXiv subjects

Paavo Rasilo

Publications and source records attributed to Paavo Rasilo.

4 recordsLinked to original sources

arXiv2026

Fixed-mesh based approach for modeling of superconducting magnetic bearings

Numerical simulations of superconducting magnetic bearings (SMBs) are complicated by the relative motion between high temperature superconductors and the magnetic guideway, which commonly requires repeated updates of the geometry and mesh. We present a fixed-mesh based approach for modeling the motion induced effects in which a coordinate transformation is applied only to the air region between the moving regions. The transformation can be included in a time-dependent anisotropic material tensor, leaving the mesh during the simulation and the rest of the formulation unchanged. To provide numerical examples, the approach is implemented in 2D using the finite element method with the $j$-$a$ formulation and is combined with homogenization and circuit coupling for double-crossed loops of coated conductors. The open-source model implementations are made available. The proposed approach is verified and validated against existing modeling approaches and experimental results from the literature for SMBs. Two simulation examples are presented, and in both of them the levitation force predicted by the fixed-mesh model agrees with the experimental results, yielding $R^2$ values above 0.99. For a verification problem, it is shown that the fixed-mesh model converges towards the remeshed reference solution under mesh refinement as expected. For an SMB undergoing vertical and horizontal translations, the homogenized fixed-mesh model reproduces the lateral-force response of a fully resolved moving-geometry reference model. Additionally, the homogenized fixed-mesh model is computationally more efficient than the reference model, indicating a significant reduction in the number of degrees of freedom and the computation time. The results demonstrate accurate and computationally efficient simulation of translational motion with the fixed-mesh based approach.

cs.CE↗

arXiv2026

Homogenization of HTS coils with the h, h-phi, and t-omega foil conductor model

Efficient numerical models are required for the design of systems with high temperature superconductor (HTS) coils, as fully resolved finite element simulations of individual coated conductors become computationally prohibitive. This work applies the foil conductor model (FCM) to insulated HTS coils using magnetic field conforming h-(full), h-$\phi$, and t-$\omega$ formulations. The approach replaces individual turns by a homogenized bulk and ensures physically consistent current density distributions in the coils by using additional voltage basis functions in the finite element formulations. The models are verified in 2D axisymmetric and 3D geometries with a pancake coil simulation under AC transport current excitation. All FCM formulations show excellent agreement with reference detailed simulations, with coefficients of determination above 0.99 for instantaneous AC losses. In 3D, the h-$\phi$ and especially the t-$\omega$ formulation substantially reduce the number of degrees of freedom by using the magnetic scalar potential in non-conducting regions. Scalability is demonstrated with a 3D stack of racetrack coils model with a field- and angle-dependent critical current density. For the stack of racetrack coils, while maintaining accurate loss prediction, the t-$\omega$ FCM achieves a speedup factor of 22 and reduces degrees of freedom by 78 % with respect to a detailed reference model.

cs.CE↗

arXiv2025

Magnetic Field Conforming Formulations for Foil Windings

We extend the foil winding homogenization method to magnetic field conforming formulations. We first propose a full magnetic field foil winding formulation by analogy with magnetic flux density conforming formulations. We then introduce the magnetic scalar potential in non-conducting regions to improve the efficiency of the model. This leads to a significant reduction in the number of degrees of freedom, particularly in 3-D applications. The proposed models are verified on two frequency-domain benchmark problems: a 2-D axisymmetric problem and a 3-D problem. They reproduce results obtained with magnetic flux density conforming formulations and with resolved conductor models that explicitly discretize all turns. Moreover, the models are applied in the transient simulation of a high-temperature superconducting coil. In all investigated configurations, the proposed models provide reliable results while considerably reducing the size of the numerical problem to be solved.

cs.CE↗

arXiv2024

Foil Conductor Model for Efficient Simulation of HTS Coils in Large Scale Applications

Homogenization techniques are an appealing approach to reduce computational complexity in systems containing coils with large numbers of high temperature superconductor (HTS) tapes. Resolving all the coated conductor layers and turns in coils is often computationally prohibitive. In this paper, we extend the foil conductor model, well-known in normal conducting applications, to applications with insulated HTS coils. To enhance the numerical performance of the model, the conventional formulation based on A-V is extended to J-A-V. The model is verified to be suitable for simulations of superconductors and to accelerate the calculations compared to resolving all the individual layers. The performance of both the A-V and J-A-V formulated models is examined, and the J-A-V variant is concluded to be advantageous.

cs.CE↗