arXiv subjects

P. Thomas

Publications and source records attributed to P. Thomas.

At least 19 recordsLinked to original sources

arXiv2026

Design of experiments characterising heat conduction in magnetised, weakly collisional plasma

Heat conduction in weakly collisional, magnetised plasma is challenging to model accurately due to multifaceted physics governing heat-carrying electrons, including microinstabilities that scatter electrons and modify heat transport. Capturing these effects requires multidimensional kinetic theory simulations, which are computationally expensive. Experimental constraints overcome this issue, resulting in improved understanding of thermal transport in systems such as the intra-cluster medium of galaxy clusters, and the hot-spot in inertial confinement fusion. In this paper, we present a new experimental platform that produces a weakly collisional high-\b{eta} plasma expected to be susceptible to the whistler heat-flux instability. This platform, to be fielded on the Orion laser, enables characterisation of whistler-regulated thermal conductivity. The platform design is assessed using radiation-magnetohydrodynamics simulations with the code FLASH. Simulations using three thermal conduction models predict conductivity suppression by over an order of magnitude relative to the Spitzer value at whistler saturation, demonstrating the efficacy of the platform.

physics.plasm-ph↗

arXiv2021

A Quantum Repeater Node Demonstrating Unconditionally Secure Key Distribution

Long-distance quantum communication requires quantum repeaters to overcome photon loss in optical fibers. Here we demonstrate a repeater node with two memory atoms in an optical cavity. Both atoms are individually and repeatedly entangled with photons that are distributed until each communication partner has independently received one of them. An atomic Bell-state measurement followed by classical communication serves to establish a key. We demonstrate scaling advantage of the key rate, increase the effective attenuation length by a factor of two, and beat the error-rate threshold of 11\% for unconditionally secure communication, the corner stones for repeater-based quantum networks.

quant-ph↗

arXiv2019

Photometric analyses of Saturn's small moons: Aegaeon, Methone and Pallene are dark; Helene and Calypso are bright

We examine the surface brightnesses of Saturn's smaller satellites using a photometric model that explicitly accounts for their elongated shapes and thus facilitates comparisons among different moons. Analyses of Cassini imaging data with this model reveals that the moons Aegaeon, Methone and Pallene are darker than one would expect given trends previously observed among the nearby mid-sized satellites. On the other hand, the trojan moons Calypso and Helene have substantially brighter surfaces than their co-orbital companions Tethys and Dione. These observations are inconsistent with the moons' surface brightnesses being entirely controlled by the local flux of E-ring particles, and therefore strongly imply that other phenomena are affecting their surface properties. The darkness of Aegaeon, Methone and Pallene is correlated with the fluxes of high-energy protons, implying that high-energy radiation is responsible for darkening these small moons. Meanwhile, Prometheus and Pandora appear to be brightened by their interactions with nearby dusty F ring, implying that enhanced dust fluxes are most likely responsible for Calypso's and Helene's excess brightness. However, there are no obvious structures in the E ring that would preferentially brighten these two moons, so there must either be something subtle in the E-ring particles' orbital properties that leads to asymmetries in the relevant fluxes, or something happened recently to temporarily increase these moons' brightnesses.

astro-ph.EP↗

arXiv2017

Quantum liquid droplets in a mixture of Bose-Einstein condensates

Quantum droplets are small clusters of atoms self-bound by the balance of attractive and repulsive forces. Here we report on the observation of a novel type of droplets, solely stabilized by contact interactions in a mixture of two Bose-Einstein condensates. We demonstrate that they are several orders of magnitude more dilute than liquid helium by directly measuring their size and density via in situ imaging. Moreover, by comparison to a single-component condensate, we show that quantum many-body effects stabilize them against collapse. We observe that droplets require a minimum atom number to be stable. Below, quantum pressure drives a liquid-to-gas transition that we map out as a function of interaction strength. These ultra-dilute isotropic liquids remain weakly interacting and constitute an ideal platform to benchmark quantum many-body theories.

cond-mat.quant-gas↗

arXiv2017

Verifying bound entanglement of dephased Werner states

The verification of quantum entanglement under the influence of realistic noise and decoherence is crucial for the development of quantum technologies. Unfortunately, a full entanglement characterization is generally not possible with most entanglement criteria such as entanglement witnesses or the partial transposition criterion. In particular, so called bound entanglement cannot be certified via the partial transposition criterion. Here we present the full entanglement verification of dephased qubit and qutrit Werner states via entanglement quasiprobabilities. Remarkably, we are able to reveal bound entanglement for noisy-mixed states in the qutrit case. This example demonstrates the strength of the entanglement quasiprobabilities for verifying the full entanglement of quantum states suffering from noise.

quant-ph↗

arXiv2016

Hybrid graphene plasmonic waveguide modulators

The unique optical and electronic properties of graphene allow one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic/metallic structures is not fully realized. Here we report fabrication and study of hybrid graphene-plasmonic modulators. We consider several types of modulators and identify the most promising one for light modulation at telecom and near-infrared. Our proof-of-concept results pave the way towards on-chip realization of efficient graphene-based active plasmonic waveguide devices for optical communications.

cond-mat.mes-hall↗

arXiv2015

Ground-state atomic polarization relaxation-time measurement of Rb filled hypocycloidal core-shaped Kagome HC-PCF

We report on the measurement of ground state atomic polarization relaxation tile of Rb vapor confined in five different hypocycloidal core shape Kagome hollow core photonic crystal fibers made with uncoated silica glass. We are able to distinguish between wall-collision and transit-time effects in optical waveguide and deduce the contribution of the atom's dwell time at the core wall surface. In contrast with convetional macroscopic atomic cell configuration, and in agreement with Monte Carlo simulations, the measured relaxation times were found to be at least one order of magnitude longer than the limit set by the atom-wall collisional relaxation from thermal atoms. This extended relaxation time is explained by the combination of a stronger contribution of the slow atoms in the atomic polarization build-up, and of the relatively significant contribution of dwell time to the relaxation process of the ground state polarization.

physics.atom-ph↗

arXiv2013

Effect of TeO2 addition on the dielectric properties of CaCu3Ti4O12 ceramics derived from the oxalate precursor route

CaCu3Ti4O12 (CCTO) ceramics which has perovskite structure gained considerable attention due to its giant permittivity. But, it has high tan {\delta} (0.1 at 1kHz) at room temperature, which needs to be minimised to the level of practical applications. Hence, TeO2 which is a good glass former has been deliberately added to CCTO nano ceramic (derived from the oxalate precursor route) to explore the possibility of reducing the dielectric loss while maintaining the high permittivity. The structural, morphological and dielectric properties of the pure CCTO and TeO2 added ceramics were studied using X-ray diffraction, Scanning Electron Microscope along with Energy Dispersive X-ray Analysis (EDX), spectroscopy and Impedance analyzer. For the 2.0 wt % TeO2 added ceramics, there is a remarkable difference in the microstructural features as compared to that of pure CCTO ceramics. This sample exhibited permittivity values as high as 7387 @ 10 KHz and low dielectric loss value of 0.037 @ 10 kHz, which can be exploited for the high frequency capacitors application.

cond-mat.mtrl-sci↗

arXiv2013

Dielectric properties of Poly(methyl methacrylate) (PMMA)/CaCu3Ti4O12 Composites

Materials with high dielectric constant are in great demand for the miniaturization of electronic devices. More specifically, high dielectric constant polymer-ceramic composites are useful for embedded capacitor applications. A composite consisting of giant dielectric CaCu3Ti4O12 (CCTO) incorporated into the Poly(methyl methacrylate) (PMMA) polymer matrix has been fabricated by melt mixing followed by hot pressing. The composites thus fabricated has been characterised for structural, morphological and dielectric properties. The composites dielectric constants had increased when the CCTO content increased in the PMMA matrix. The dielectric constant of PMMA is around 4.9 @ 100Hz which has increased to 15.7 @ 100Hz when the ceramic content has increased to 40 Vol %. At low frequencies, space charge polarisation is dominant. This composite also exhibited remarkably low dielectric loss at high frequency, which makes this composite a suitable candidate for the capacitors in high frequency application.

cond-mat.mtrl-sci↗

arXiv2013

Fabrication and Characterization of Poly(methyl methacrylate)CaCu3Ti4O12 Composites

Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), scanning electron microscopy (SEM) and Impedance analyser for their structural, morphology and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. The composite, with 38 Vol % of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low frequency relaxation is attributed to the space charge polarization MWS effect. Theoretical models were employed to rationalise the dielectric behaviour of these composites. At higher temperatures, the relaxation peak shifts to higher frequencies, due to the merging of both {beta} and {alpha} relaxations into a single dielectric dispersion peak. The AC conductivity in the high frequency region was attributed to the electronic polarization

cond-mat.mtrl-sci↗

arXiv2013

Synthesis of Nanoparticles of the Giant Dielectric Material, CaCu3Ti4O12 from a Precursor Route

A complex oxalate precursor, CaCu3(TiO)4(C2O4)8.9H2O, was synthesized and the precipitate that obtained was confirmed to be monophasic by the wet chemical analyses, X-ray diffraction, FTIR absorption and TG, DTA analyses. The thermal decomposition of this oxalate precursor led to the formation of phase-pure calcium copper titanate, CaCu3Ti4O12, at 680oC. The bright field TEM micrographs revealed that the size of the as synthesized crystallites to be in the 30 to 80 nm range. The powders so obtained had excellent sinterability resulting in high density ceramics which exhibited giant dielectric constants upto 40000 (1 kHz) at 25oC accompanied by low dielectric losses, less than 0.07.

cond-mat.mtrl-sci↗

arXiv2013

Structural, Thermal and Electrical properties of Poly(methyl methacrylate)-CaCu3Ti4O12 composite sheets fabricated via melt mixing

Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) composites were fabricated via melt mixing followed by hot pressing technique. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), Thermo Mechanical (TMA), Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and Impedance analyser for their structural, thermal and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. However, there was no significant difference in the glass transition (Tg) temperature between the polymer and the composite. The appearance of additional vibrational frequencies in the range 400-600 cm-1 in FTIR spectra indicated a possible interaction between PMMA and CCTO. The composite, with 38 Vol % of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low frequency relaxation is attributed to the space charge polarization/MWS effect. The origin of AC conductivity particularly in the high frequency region was attributed to the electronic polarization.

cond-mat.mtrl-sci↗

arXiv2013

Effect of calcium stoichiometry on the dielectric response of CaCu3Ti4O12 Ceramics

CaxCu3Ti4O12 polycrystalline powders with variation in calcium content were prepared via the oxalate precursor route. The structural, morphological and dielectric properties of the ceramics fabricated using these powders were studied using x ray diffraction, Scanning Electron Microscope along with Energy Dispersive X ray Analysis, Transmission Electron Microscopy, Electron Spin Resonance (ESR) spectroscopy and Impedance analyzer. The X ray diffraction patterns obtained for the x = 0.97, 1.0 and 1.1 powdered ceramics could be indexed to a body centered cubic perovskite related structure associated with the space group Im3. The ESR studies confirmed the absence of oxygen vacancies in the ceramics that were prepared using the oxalate precursor route. The dielectric properties of these suggest that the calcium deficient sample (x= 0.97) has a reduced dielectric loss while retaining the high dielectric constant which is of significant industrial relevance.

cond-mat.mtrl-sci↗

arXiv2013

Nanoparticles of the giant dielectric material, CaCu3Ti4O12 from a precursor route

A method of preparing the nanoparticles of CaCu3Ti4O12 (CCTO) with the crystallite size varying from 30 to 200 nm is optimized at a temperature as low as 680 1C from the exothermic thermal decomposition of an oxalate precursor, CaCu3(TiO)4(C2O4)8 ? 9H2O. The phase singularity of the complex oxalate precursor is confirmed by the wet chemical analyses, X-ray diffraction, FT-IR and TGA,DTA analyses. The UV Vis reflectance and ESR spectra of CCTO powders indicate that the Cu(II) coordination changes from distorted octahedra to nearly flattened tetrahedra (squashed) to square-planar geometry with increasing annealing temperature. The HRTEM images have revealed that the evolution of the microstructure in nanoscale is related to the change in Cu(II) coordination around the surface regions for the chemically prepared powder specimens. The nearly flattened tetrahedral geometry prevails for CuO4 in the near surface regions of the particles, whereas square-planar CuO4 groups are dominant in the interior regions of the nanoparticles. The powders derived from the oxalate precursor have excellent sinterability, resulting in high-density ceramics which exhibited giant dielectric constants upto 40,000 (1 kHz) at 25 1C, accompanied by low dielectric loss 0.07.

cond-mat.mtrl-sci↗

arXiv2013

In-situ synthesis and characterization of polyaniline -CaCu3Ti4O12 nano crystal composites

High dielectric constant nano composite of Polyaniline (PANI) CaCu3Ti4O12 (CCTO) was synthesized using a simple procedure involving in-situ polymerization of aniline in dil. HCl. The PANI and the composite were subjected to X-ray diffraction, Fourier transform infrared, Thermo gravimetric, Scanning electron microscopy and Transmission electron microscopy analyses. The presence of the nano crystallites of CCTO embedded in the nanofibers of PANI matrix was established by TEM. Frequency dependent characteristics of the dielectric constant, dielectric loss and AC conductivity were studied for the PANI and the composites. The dielectric constant increased as the CCTO content increased in PANI but decreased with increasing frequency of measurement. The dielectric loss was two times less than the value obtained for pure PANI around 100Hz. The AC conductivity increased slightly upto 2kHz as the CCTO content increased in the PANI which was attributed to the polarization of the charge carriers.

cond-mat.mtrl-sci↗

arXiv2013

Structural and dielectric properties of glasses in the system TeO2-CaCu3Ti4O12

The glasses in the system (100-x)TeO2-xCaCu3Ti4O12, (x=0.25 to 3 mol %) were fabricated. The color varied from olive green to brown as the CaCu3Ti4O12 (CCTO) content increased in TeO2 matrix. The X-ray powder diffraction and differential scanning calorimetric analyses that were carried out on the as-quenched samples confirmed their amorphous and glassy nature respectively. The dielectric constant and loss in the 100 Hz-1MHz frequency range were monitored as a function of temperature (50-400oC). The dielectric constant and the loss (D) increased as the CCTO content increased in TeO2 at all the frequencies and temperatures under investigation. Further, the effective dielectric constant and D were found to be frequency independent in the 50-200oC temperature range. The value obtained for the loss at 1MHz was 0.0019 which was typical of low loss materials, and exhibited near constant loss (NCL) in the 100Hz-1MHz frequency range. The electrical relaxation was rationalized using the electric modulus formalism. These glasses may be of considerable interest as substrates for high frequency circuit elements in conventional semiconductor industries owing to their high thermal stability.

cond-mat.mtrl-sci↗

arXiv2013

Dielectric properties of Poly(vinylidene fluoride)/ CaCu3Ti4O12 nanocrystal composite thick films

The Poly(vinylidene fluoride)/CaCu3Ti4O12 (CCTO) nanocrystal composite films (85nm) with relatively high dielectric permittivity (90 at 100Hz) were prepared by the solution casting followed by spin coating technique. The structural, the microstructural and the dielectric properties of the composites were studied using X-ray diffraction, Scanning Electron Microscope, and Impedance analyzer respectively. The effective dielectric permittivity of the composite increased with increase in the volume fraction of CCTO at all the frequencies (100 Hz to 1MHz) under investigation. The room temperature dielectric permittivity which is around 90 at 100Hz, has increased to about 290 at 125oC (100Hz). These results may be exploited in the development of high energy density capacitors.

cond-mat.mtrl-sci↗

arXiv2012

VIS: the visible imager for Euclid

Euclid-VIS is a large format visible imager for the ESA Euclid space mission in their Cosmic Vision program, scheduled for launch in 2019. Together with the near infrared imaging within the NISP instrument it forms the basis of the weak lensing measurements of Euclid. VIS will image in a single r+i+z band from 550-900 nm over a field of view of ~0.5 deg2. By combining 4 exposures with a total of 2240 sec, VIS will reach to V=24.5 (10{\sigma}) for sources with extent ~0.3 arcsec. The image sampling is 0.1 arcsec. VIS will provide deep imaging with a tightly controlled and stable point spread function (PSF) over a wide survey area of 15000 deg2 to measure the cosmic shear from nearly 1.5 billion galaxies to high levels of accuracy, from which the cosmological parameters will be measured. In addition, VIS will also provide a legacy imaging dataset with an unprecedented combination of spatial resolution, depth and area covering most of the extra-Galactic sky. Here we will present the results of the study carried out by the Euclid Consortium during the Euclid Definition phase.

astro-ph.IM↗