arXiv Science⌕ Search

arXiv subjects

Onur Mutlu

Publications and source records attributed to Onur Mutlu.

At least 289 records · Page 16Linked to original sources

What Your DRAM Power Models Are Not Telling You: Lessons from a Detailed Experimental Study

Main memory (DRAM) consumes as much as half of the total system power in a computer today, resulting in a growing need to develop new DRAM architectures and systems that consume less power. Researchers have long relied on DRAM power models that are based off of standardized current measurements provided by vendors, called IDD values. Unfortunately, we find that these models are highly inaccurate, and do not reflect the actual power consumed by real DRAM devices. We perform the first comprehensive experimental characterization of the power consumed by modern real-world DRAM modules. Our extensive characterization of 50 DDR3L DRAM modules from three major vendors yields four key new observations about DRAM power consumption: (1) across all IDD values that we measure, the current consumed by real DRAM modules varies significantly from the current specified by the vendors; (2) DRAM power consumption strongly depends on the data value that is read or written; (3) there is significant structural variation, where the same banks and rows across multiple DRAM modules from the same model consume more power than other banks or rows; and (4) over successive process technology generations, DRAM power consumption has not decreased by as much as vendor specifications have indicated. Based on our detailed analysis and characterization data, we develop the Variation-Aware model of Memory Power Informed by Real Experiments (VAMPIRE). We show that VAMPIRE has a mean absolute percentage error of only 6.8% compared to actual measured DRAM power. VAMPIRE enables a wide range of studies that were not possible using prior DRAM power models. As an example, we use VAMPIRE to evaluate a new power-aware data encoding mechanism, which can reduce DRAM energy consumption by an average of 12.2%. We plan to open-source both VAMPIRE and our extensive raw data collected during our experimental characterization.

cs.AR↗

Techniques for Efficiently Handling Power Surges in Fuel Cell Powered Data Centers: Modeling, Analysis, Results

Fuel cells are a promising power source for future data centers, offering high energy efficiency, low greenhouse gas emissions, and high reliability. However, due to mechanical limitations related to fuel delivery, fuel cells are slow to adjust to sudden increases in data center power demands, which can result in temporary power shortfalls. To mitigate the impact of power shortfalls, prior work has proposed to either perform power capping by throttling the servers, or to leverage energy storage devices (ESDs) that can temporarily provide enough power to make up for the shortfall while the fuel cells ramp up power generation. Both approaches have disadvantages: power capping conservatively limits server performance and can lead to service level agreement (SLA) violations, while ESD-only solutions must significantly overprovision the energy storage device capacity to tolerate the shortfalls caused by the worst-case (i.e., largest) power surges, which greatly increases the total cost of ownership (TCO). We propose SizeCap, the first ESD sizing framework for fuel cell powered data centers, which coordinates ESD sizing with power capping to enable a cost-effective solution to power shortfalls in data centers. SizeCap sizes the ESD just large enough to cover the majority of power surges, but not the worst-case surges that occur infrequently, to greatly reduce TCO. It then uses the smaller capacity ESD in conjunction with power capping to cover the power shortfalls caused by the worst-case power surges. As part of our new flexible framework, we propose multiple power capping policies with different degrees of awareness of fuel cell and workload behavior, and evaluate their impact on workload performance and ESD size. Using traces from Microsoft's production data center systems, we demonstrate that SizeCap significantly reduces the ESD size without violating any SLAs.

cs.DC↗

Recent Advances in DRAM and Flash Memory Architectures

This article features extended summaries and retrospectives of some of the recent research done by our group, SAFARI, on (1) understanding, characterizing, and modeling various critical properties of modern DRAM and NAND flash memory, the dominant memory and storage technologies, respectively; and (2) several new mechanisms we have proposed based on our observations from these analyses, characterization, and modeling, to tackle various key challenges in memory and storage scaling. In order to understand the sources of various bottlenecks of the dominant memory and storage technologies, these works perform rigorous studies of device-level and application-level behavior, using a combination of detailed simulation and experimental characterization of real memory and storage devices.

cs.AR↗

Recent Advances in Overcoming Bottlenecks in Memory Systems and Managing Memory Resources in GPU Systems

This article features extended summaries and retrospectives of some of the recent research done by our research group, SAFARI, on (1) various critical problems in memory systems and (2) how memory system bottlenecks affect graphics processing unit (GPU) systems. As more applications share a single system, operations from each application can contend with each other at various shared components. Such contention can slow down each application or thread of execution. The compound effect of contention, high memory latency and access overheads, as well as inefficient management of resources, greatly degrades performance, quality-of-service, and energy efficiency. The ten works featured in this issue study several aspects of (1) inter-application interference in multicore systems, heterogeneous systems, and GPUs; (2) the growing overheads and expenses associated with growing memory densities and latencies; and (3) performance, programmability, and portability issues in modern GPUs, especially those related to memory system resources.

cs.AR↗

Predictable Performance and Fairness Through Accurate Slowdown Estimation in Shared Main Memory Systems

This paper summarizes the ideas and key concepts in MISE (Memory Interference-induced Slowdown Estimation), which was published in HPCA 2013 [97], and examines the work's significance and future potential. Applications running concurrently on a multicore system interfere with each other at the main memory. This interference can slow down different applications differently. Accurately estimating the slowdown of each application in such a system can enable mechanisms that can enforce quality-of-service. While much prior work has focused on mitigating the performance degradation due to inter-application interference, there is little work on accurately estimating slowdown of individual applications in a multi-programmed environment. Our goal is to accurately estimate application slowdowns, towards providing predictable performance. To this end, we first build a simple Memory Interference-induced Slowdown Estimation (MISE) model, which accurately estimates slowdowns caused by memory interference. We then leverage our MISE model to develop two new memory scheduling schemes: 1) one that provides soft quality-of-service guarantees, and 2) another that explicitly attempts to minimize maximum slowdown (i.e., unfairness) in the system. Evaluations show that our techniques perform significantly better than state-of-the-art memory scheduling approaches to address the same problems. Our proposed model and techniques have enabled significant research in the development of accurate performance models [35, 59, 98, 110] and interference management mechanisms [66, 99, 100, 108, 119, 120].

cs.AR↗

Heterogeneous-Reliability Memory: Exploiting Application-Level Memory Error Tolerance

This paper summarizes our work on characterizing application memory error vulnerability to optimize datacenter cost via Heterogeneous-Reliability Memory (HRM), which was published in DSN 2014, and examines the work's significance and future potential. Memory devices represent a key component of datacenter total cost of ownership (TCO), and techniques used to reduce errors that occur on these devices increase this cost. Existing approaches to providing reliability for memory devices pessimistically treat all data as equally vulnerable to memory errors. Our key insight is that there exists a diverse spectrum of tolerance to memory errors in new data-intensive applications, and that traditional one-size-fits-all memory reliability techniques are inefficient in terms of cost. This presents an opportunity to greatly reduce server hardware cost by provisioning the right amount of memory reliability for different applications. Toward this end, in our DSN 2014 paper, we make three main contributions to enable highly-reliable servers at low datacenter cost. First, we develop a new methodology to quantify the tolerance of applications to memory errors. Second, using our methodology, we perform a case study of three new data-intensive workloads (an interactive web search application, an in-memory key--value store, and a graph mining framework) to identify new insights into the nature of application memory error vulnerability. Third, based on our insights, we propose several new hardware/software heterogeneous-reliability memory system designs to lower datacenter cost while achieving high reliability and discuss their trade-offs. We show that our new techniques can reduce server hardware cost by 4.7% while achieving 99.90% single server availability.

cs.DC↗

Experimental Characterization, Optimization, and Recovery of Data Retention Errors in MLC NAND Flash Memory

This paper summarizes our work on experimentally characterizing, mitigating, and recovering data retention errors in multi-level cell (MLC) NAND flash memory, which was published in HPCA 2015, and examines the work's significance and future potential. Retention errors, caused by charge leakage over time, are the dominant source of flash memory errors. Understanding, characterizing, and reducing retention errors can significantly improve NAND flash memory reliability and endurance. In this work, we first characterize, with real 2Y-nm MLC NAND flash chips, how the threshold voltage distribution of flash memory changes with different retention ages -- the length of time since a flash cell was programmed. We observe from our characterization results that 1) the optimal read reference voltage of a flash cell, using which the data can be read with the lowest raw bit error rate (RBER), systematically changes with its retention age, and 2) different regions of flash memory can have different retention ages, and hence different optimal read reference voltages. Based on our findings, we propose two new techniques. First, Retention Optimized Reading (ROR) adaptively learns and applies the optimal read reference voltage for each flash memory block online. The key idea of ROR is to periodically learn a tight upper bound of the optimal read reference voltage, and from there approach the optimal read reference voltage. Our evaluations show that ROR can extend flash memory lifetime by 64% and reduce average error correction latency by 10.1%. Second, Retention Failure Recovery (RFR) recovers data with uncorrectable errors offline by identifying and probabilistically correcting flash cells with retention errors. Our evaluation shows that RFR essentially doubles the error correction capability.

cs.AR↗

Flexible-Latency DRAM: Understanding and Exploiting Latency Variation in Modern DRAM Chips

This article summarizes key results of our work on experimental characterization and analysis of latency variation and latency-reliability trade-offs in modern DRAM chips, which was published in SIGMETRICS 2016, and examines the work's significance and future potential. The goal of this work is to (i) experimentally characterize and understand the latency variation across cells within a DRAM chip for these three fundamental DRAM operations, and (ii) develop new mechanisms that exploit our understanding of the latency variation to reliably improve performance. To this end, we comprehensively characterize 240 DRAM chips from three major vendors, and make six major new observations about latency variation within DRAM. Notably, we find that (i) there is large latency variation across the cells for each of the three operations; (ii) variation characteristics exhibit significant spatial locality: slower cells are clustered in certain regions of a DRAM chip; and (iii) the three fundamental operations exhibit different reliability characteristics when the latency of each operation is reduced. Based on our observations, we propose Flexible-LatencY DRAM (FLY-DRAM), a mechanism that exploits latency variation across DRAM cells within a DRAM chip to improve system performance. The key idea of FLY-DRAM is to exploit the spatial locality of slower cells within DRAM, and access the faster DRAM regions with reduced latencies for the fundamental operations. Our evaluations show that FLY-DRAM improves the performance of a wide range of applications by 13.3%, 17.6%, and 19.5%, on average, for each of the three different vendors' real DRAM chips, in a simulated 8-core system.

cs.AR↗

Voltron: Understanding and Exploiting the Voltage-Latency-Reliability Trade-Offs in Modern DRAM Chips to Improve Energy Efficiency

This paper summarizes our work on experimental characterization and analysis of reduced-voltage operation in modern DRAM chips, which was published in SIGMETRICS 2017, and examines the work's significance and future potential. We take a comprehensive approach to understanding and exploiting the latency and reliability characteristics of modern DRAM when the DRAM supply voltage is lowered below the nominal voltage level specified by DRAM standards. We perform an experimental study of 124 real DDR3L (low-voltage) DRAM chips manufactured recently by three major DRAM vendors. We find that reducing the supply voltage below a certain point introduces bit errors in the data, and we comprehensively characterize the behavior of these errors. We discover that these errors can be avoided by increasing the latency of three major DRAM operations (activation, restoration, and precharge). We perform detailed DRAM circuit simulations to validate and explain our experimental findings. We also characterize the various relationships between reduced supply voltage and error locations, stored data patterns, DRAM temperature, and data retention. Based on our observations, we propose a new DRAM energy reduction mechanism, called Voltron. The key idea of Voltron is to use a performance model to determine by how much we can reduce the supply voltage without introducing errors and without exceeding a user-specified threshold for performance loss. Our evaluations show that Voltron reduces the average DRAM and system energy consumption by 10.5% and 7.3%, respectively, while limiting the average system performance loss to only 1.8%, for a variety of memory-intensive quad-core workloads. We also show that Voltron significantly outperforms prior dynamic voltage and frequency scaling mechanisms for DRAM.

cs.AR↗

LISA: Increasing Internal Connectivity in DRAM for Fast Data Movement and Low Latency

This paper summarizes the idea of Low-Cost Interlinked Subarrays (LISA), which was published in HPCA 2016, and examines the work's significance and future potential. Contemporary systems perform bulk data movement movement inefficiently, by transferring data from DRAM to the processor, and then back to DRAM, across a narrow off-chip channel. The use of this narrow channel results in high latency and energy consumption. Prior work proposes to avoid these high costs by exploiting the existing wide internal DRAM bandwidth for bulk data movement, but the limited connectivity of wires within DRAM allows fast data movement within only a single DRAM subarray. Each subarray is only a few megabytes in size, greatly restricting the range over which fast bulk data movement can happen within DRAM. Our HPCA 2016 paper proposes a new DRAM substrate, Low-Cost Inter-Linked Subarrays (LISA), whose goal is to enable fast and efficient data movement across a large range of memory at low cost. LISA adds low-cost connections between adjacent subarrays. By using these connections to interconnect the existing internal wires (bitlines) of adjacent subarrays, LISA enables wide-bandwidth data transfer across multiple subarrays with little (only 0.8%) DRAM area overhead. As a DRAM substrate, LISA is versatile, enabling a variety of new applications. We describe and evaluate three such applications in detail: (1) fast inter-subarray bulk data copy, (2) in-DRAM caching using a DRAM architecture whose rows have heterogeneous access latencies, and (3) accelerated bitline precharging by linking multiple precharge units together. Our extensive evaluations show that each of LISA's three applications significantly improves performance and memory energy efficiency on a variety of workloads and system configurations.

cs.AR↗

SoftMC: Practical DRAM Characterization Using an FPGA-Based Infrastructure

This paper summarizes the SoftMC DRAM characterization infrastructure, which was published in HPCA 2017, and examines the work's significance and future potential. SoftMC (Soft Memory Controller) is the first publicly-available DRAM testing infrastructure that can flexibly and efficiently test DRAM chips in a manner accessible to both software and hardware developers. SoftMC is an FPGA-based testing platform that can control and test memory modules designed for the commonly-used DDR (Double Data Rate) interface. SoftMC has two key properties: (i) it provides flexibility to thoroughly control memory behavior or to implement a wide range of mechanisms using DDR commands; and (ii) it is easy to use as it provides a simple and intuitive high-level programming interface for users, completely hiding the low-level details of the FPGA. We demonstrate the capability, flexibility, and programming ease of SoftMC with two example use cases. First, we implement a test that characterizes the retention time of DRAM cells. Second, we show that the expected latency reduction of two recently-proposed mechanisms, which rely on accessing recently-refreshed or recently-accessed DRAM cells faster than other DRAM cells, is not observable in existing DRAM chips. Various versions of the SoftMC platform have enabled many of our other DRAM characterization studies. We discuss several other use cases of SoftMC, including the ability to characterize emerging non-volatile memory modules that obey the DDR standard. We hope that our open-source release of SoftMC fills a gap in the space of publicly-available experimental memory testing infrastructures and inspires new studies, ideas, and methodologies in memory system design.

cs.AR↗

Read Disturb Errors in MLC NAND Flash Memory

This paper summarizes our work on experimentally characterizing, mitigating, and recovering read disturb errors in multi-level cell (MLC) NAND flash memory, which was published in DSN 2015, and examines the work's significance and future potential. NAND flash memory reliability continues to degrade as the memory is scaled down and more bits are programmed per cell. A key contributor to this reduced reliability is read disturb, where a read to one row of cells impacts the threshold voltages of unread flash cells in different rows of the same block. For the first time in open literature, this work experimentally characterizes read disturb errors on state-of-the-art 2Y-nm (i.e., 20-24 nm) MLC NAND flash memory chips. Our findings (1) correlate the magnitude of threshold voltage shifts with read operation counts, (2) demonstrate how program/erase cycle count and retention age affect the read-disturb-induced error rate, and (3) identify that lowering pass-through voltage levels reduces the impact of read disturb and extend flash lifetime. Particularly, we find that the probability of read disturb errors increases with both higher wear-out and higher pass-through voltage levels. We leverage these findings to develop two new techniques. The first technique mitigates read disturb errors by dynamically tuning the pass-through voltage on a per-block basis. Using real workload traces, our evaluations show that this technique increases flash memory endurance by an average of 21%. The second technique recovers from previously-uncorrectable flash errors by identifying and probabilistically correcting cells susceptible to read disturb errors. Our evaluations show that this recovery technique reduces the raw bit error rate by 36%.

cs.AR↗

Characterizing, Exploiting, and Mitigating Vulnerabilities in MLC NAND Flash Memory Programming

This paper summarizes our work on experimentally analyzing, exploiting, and addressing vulnerabilities in multi-level cell NAND flash memory programming, which was published in the industrial session of HPCA 2017, and examines the work's significance and future potential. Modern NAND flash memory chips use multi-level cells (MLC), which store two bits of data in each cell, to improve chip density. As MLC NAND flash memory scaled down to smaller manufacturing process technologies, manufacturers adopted a two-step programming method to improve reliability. In two-step programming, the two bits of a multi-level cell are programmed using two separate steps, in order to minimize the amount of cell-to-cell program interference induced on neighboring flash cells. In this work, we demonstrate that two-step programming exposes new reliability and security vulnerabilities in state-of-the-art MLC NAND flash memory. We experimentally characterize contemporary 1X-nm (i.e., 15--19nm) flash memory chips, and find that a partially-programmed flash cell (i.e., a cell where the second programming step has not yet been performed) is much more vulnerable to cell-to-cell interference and read disturb than a fully-programmed cell. We show that it is possible to exploit these vulnerabilities on solid-state drives (SSDs) to alter the partially-programmed data, causing (potentially malicious) data corruption. Based on our observations, we propose several new mechanisms that eliminate or mitigate these vulnerabilities in partially-programmed cells, and at the same time increase flash memory lifetime by 16%.

cs.AR↗

Exploiting Row-Level Temporal Locality in DRAM to Reduce the Memory Access Latency

This paper summarizes the idea of ChargeCache, which was published in HPCA 2016 [51], and examines the work's significance and future potential. DRAM latency continues to be a critical bottleneck for system performance. In this work, we develop a low-cost mechanism, called ChargeCache, that enables faster access to recently-accessed rows in DRAM, with no modifications to DRAM chips. Our mechanism is based on the key observation that a recently-accessed row has more charge and thus the following access to the same row can be performed faster. To exploit this observation, we propose to track the addresses of recently-accessed rows in a table in the memory controller. If a later DRAM request hits in that table, the memory controller uses lower timing parameters, leading to reduced DRAM latency. Row addresses are removed from the table after a specified duration to ensure rows that have leaked too much charge are not accessed with lower latency. We evaluate ChargeCache on a wide variety of workloads and show that it provides significant performance and energy benefits for both single-core and multi-core systems.

cs.AR↗

RowClone: Accelerating Data Movement and Initialization Using DRAM

In existing systems, to perform any bulk data movement operation (copy or initialization), the data has to first be read into the on-chip processor, all the way into the L1 cache, and the result of the operation must be written back to main memory. This is despite the fact that these operations do not involve any actual computation. RowClone exploits the organization and operation of commodity DRAM to perform these operations completely inside DRAM using two mechanisms. The first mechanism, Fast Parallel Mode, copies data between two rows inside the same DRAM subarray by issuing back-to-back activate commands to the source and the destination row. The second mechanism, Pipelined Serial Mode, transfers cache lines between two banks using the shared internal bus. RowClone significantly reduces the raw latency and energy consumption of bulk data copy and initialization. This reduction directly translates to improvement in performance and energy efficiency of systems running copy or initialization-intensive workloads

cs.AR↗

Exploiting the DRAM Microarchitecture to Increase Memory-Level Parallelism

This paper summarizes the idea of Subarray-Level Parallelism (SALP) in DRAM, which was published in ISCA 2012, and examines the work's significance and future potential. Modern DRAMs have multiple banks to serve multiple memory requests in parallel. However, when two requests go to the same bank, they have to be served serially, exacerbating the high latency of on-chip memory. Adding more banks to the system to mitigate this problem incurs high system cost. Our goal in this work is to achieve the benefits of increasing the number of banks with a low-cost approach. To this end, we propose three new mechanisms, SALP-1, SALP-2, and MASA (Multitude of Activated Subarrays), to reduce the serialization of different requests that go to the same bank. The key observation exploited by our mechanisms is that a modern DRAM bank is implemented as a collection of subarrays that operate largely independently while sharing few global peripheral structures. Our three proposed mechanisms mitigate the negative impact of bank serialization by overlapping different components of the bank access latencies of multiple requests that go to different subarrays within the same bank. SALP-1 requires no changes to the existing DRAM structure, and needs to only reinterpret some of the existing DRAM timing parameters. SALP-2 and MASA require only modest changes (< 0.15% area overhead) to the DRAM peripheral structures, which are much less design constrained than the DRAM core. Our evaluations show that SALP-1, SALP-2 and MASA significantly improve performance for both single-core systems (7%/13%/17%) and multi-core systems (15%/16%/20%), averaged across a wide range of workloads. We also demonstrate that our mechanisms can be combined with application-aware memory request scheduling in multicore systems to further improve performance and fairness.

cs.AR↗

Adaptive-Latency DRAM: Reducing DRAM Latency by Exploiting Timing Margins

This paper summarizes the idea of Adaptive-Latency DRAM (AL-DRAM), which was published in HPCA 2015, and examines the work's significance and future potential. AL-DRAM is a mechanism that optimizes DRAM latency based on the DRAM module and the operating temperature, by exploiting the extra margin that is built into the DRAM timing parameters. DRAM manufacturers provide a large margin for the timing parameters as a provision against two worst-case scenarios. First, due to process variation, some outlier DRAM chips are much slower than others. Second, chips become slower at higher temperatures. The timing parameter margin ensures that the slow outlier chips operate reliably at the worst-case temperature, and hence leads to a high access latency. Using an FPGA-based DRAM testing platform, our work first characterizes the extra margin for 115 DRAM modules from three major manufacturers. The experimental results demonstrate that it is possible to reduce four of the most critical timing parameters by a minimum/maximum of 17.3%/54.8% at 55C while maintaining reliable operation. AL-DRAM uses these observations to adaptively select reliable DRAM timing parameters for each DRAM module based on the module's current operating conditions. AL-DRAM does not require any changes to the DRAM chip or its interface; it only requires multiple different timing parameters to be specified and supported by the memory controller. Our real system evaluations show that AL-DRAM improves the performance of memory-intensive workloads by an average of 14% without introducing any errors. Our characterization and proposed techniques have inspired several other works on analyzing and/or exploiting different sources of latency and performance variation within DRAM chips.

cs.AR↗

Tiered-Latency DRAM: Enabling Low-Latency Main Memory at Low Cost

This paper summarizes the idea of Tiered-Latency DRAM (TL-DRAM), which was published in HPCA 2013, and examines the work's significance and future potential. The capacity and cost-per-bit of DRAM have historically scaled to satisfy the needs of increasingly large and complex computer systems. However, DRAM latency has remained almost constant, making memory latency the performance bottleneck in today's systems. We observe that the high access latency is not intrinsic to DRAM, but a trade-off is made to decrease the cost per bit. To mitigate the high area overhead of DRAM sensing structures, commodity DRAMs connect many DRAM cells to each sense amplifier through a wire called a bitline. These bit-lines have a high parasitic capacitance due to their long length, and this bitline capacitance is the dominant source of DRAM latency. Specialized low-latency DRAMs use shorter bitlines with fewer cells, but have a higher cost-per-bit due to greater sense amplifier area overhead. To achieve both low latency and low cost per bit, we introduce Tiered-Latency DRAM (TL-DRAM). In TL-DRAM, each long bitline is split into two shorter segments by an isolation transistor, allowing one of the two segments to be accessed with the latency of a short-bitline DRAM without incurring a high cost per bit. We propose mechanisms that use the low-latency segment as a hardware-managed or software-managed cache. Our evaluations show that our proposed mechanisms improve both performance and energy efficiency for both single-core and multiprogrammed workloads. Tiered-Latency DRAM has inspired several other works on reducing DRAM latency with little to no architectural modification.

cs.AR↗