arXiv ScienceSearch

arXiv subjects

Omer Burak Iskender

Publications and source records attributed to Omer Burak Iskender.

6 recordsLinked to original sources

Horizon-Dependent Tube MPC for Elliptical-Orbit Rendezvous Under Mass Uncertainty

A spacecraft closing on a target from three hundred kilometres to contact flies one guidance law across five orders of magnitude of range, and a controller that is provably safe at close range can lose that guarantee completely at long range while continuing to fly as though nothing were wrong. This paper derives the range at which the guarantee lapses and uses it as a design rule. The bound compares the prediction model's own linearisation error against the disturbance set the controller was built to reject, and needs only the sampling period, the orbit and that disturbance bound, so it can be evaluated before any simulation. On a Mars Sample Return approach it disqualifies the homing phase, where most of the propellant is spent, and clears the other two. Re-posing the disqualified phase in relative orbital elements restores the guarantee; re-posing a phase the rule already clears, in a frame two orders of magnitude more accurate, changes propellant by under a tenth of one per cent, and it is that second prediction that makes the rule falsifiable rather than descriptive. The constraint tightening also ties the prediction horizon to feasibility, so the horizon search limit becomes a mission parameter rather than a solver setting. Against a reimplementation of a published benchmark that reproduces its propellant to within one per cent, over five hundred dispersed Monte Carlo transfers per case on matched seeds, the controller saves 29% of the propellant on a circular target orbit and 40% on an eccentric one, docking inside the 0.20 m capture requirement on essentially every draw at a median miss near 5 cm. Two results run the other way: the saving is bought with time of flight and computation, and it comes from what the guarantee demanded of the terminal condition rather than from better disturbance rejection. Recursive feasibility and asymptotic stability are not claimed.

eess.SY

Horizon-Dependent Tube MPC for Spacecraft Rendezvous on Elliptical Orbits with Conditional Robust Constraint Satisfaction

Spacecraft rendezvous on elliptical orbits must hold a safety corridor under navigation noise, unmodelled perturbations, and thrust errors driven by propellant mass uncertainty. This paper develops a tube-based model predictive controller for the Yamanaka-Ankersen linear time-varying dynamics, carrying constraint-tightening tube methods from circular to elliptical orbits. A horizon-dependent, element-wise error bound propagates the actual closed-loop matrices along the prediction window, so early prediction steps keep nearly the full corridor that a constant-width tube would surrender. A multiplicative-to-additive conversion folds mass and thrust uncertainty into the same tightening recursion, and a Perron-Frobenius spectral-radius condition supplies a computable certificate that the tightening converges, with an explicit input-to-state stability gain. In a paired Monte Carlo campaign on a Mars sample-return orbit, the tube controller cuts mean corridor violations by more than an order of magnitude against a nominal predictive baseline at comparable fuel cost. A nonlinear truth-model test with oblateness perturbations well beyond the assumed disturbance budget leaves the corridor unviolated, and when the design envelope is exceeded the tightened problem becomes infeasible and the controller reverts to a saturated linear fallback, making the loss of guarantee explicit rather than silent. The construction requires only element-wise arithmetic and an open-source quadratic-programming solver.

eess.SY

Drift-Aware Multi-Target Space Tug Logistics Using Natural Orbital Precession

Multi-rendezvous missions for active debris removal and in-orbit servicing incur prohibitive propellant costs when their targets differ in the orientation of their orbital planes, and classical mission design treats the nodal precession induced by Earth's oblateness as a perturbation to be cancelled. This paper presents a drift-aware trajectory optimisation framework that instead exploits that precession as a mission-design resource, benchmarked against the published winning solution to the European Space Agency's Kessler Run trajectory-optimisation competition as a trusted reference. Three methodological contributions are made. First, an enhanced drift orbit shapes the size, shape, and inclination of an intermediate orbit to tune the differential precession rate, substantially cheaper than the altitude-only designs of prior work in the Sun-synchronous regime, where inclination is the dominant lever. Second, a global per-leg time-budget optimiser makes explicit and resolves the coupling between drift-time allocation and downstream nodal geometry that defeats greedy allocation. Third, a sequence-recovery test independently re-derives a removal order consistent with the published reference from the debris catalogue alone. Applied to the full debris campaign on the published mission partition under the competition's transfer-time rules, the framework closely matches the published benchmark cost using only analytical transfer models and minutes of single-core computation. A cross-validation anchored to a widely used flight-dynamics tool quantifies the fidelity limits of the analytic model and bounds the cost of literal execution, and the constructive nature of the algorithm supports rapid in-orbit replanning after a missed manoeuvre.

eess.SY

Reachability-Based Safe-Start Regions for Approach to a Tumbling Target with Rotating LOS Constraints

This paper presents a reachability-aware guidance architecture for autonomous approach to a tumbling, uncooperative target under a rotating line-of-sight (LOS) docking corridor. The LOS admissible set rotates with the target body frame, producing time-varying polyhedral constraints on the chaser's relative motion, and the design problem is to establish the initial states from which the chaser can safely approach and synchronize with the rotating hold point. A closed-form answer is derived from bounded-thrust relative orbital dynamics, in the form of two analytical safe-start criteria: a directional per-constraint erosion margin, quantifying the corridor margin consumed by rotation-induced drift before the thruster can arrest it, and a synchronization radius, bounding the range over which the apparent rotational velocity can still be cancelled. Closed-loop guidance combines a three-regime tracking law, spanning far-field approach, close body-frame tracking, and synchronized hold, with a receding-horizon quadratic program carrying the rotating corridor constraints and exact discrete relative-motion prediction. The criteria are benchmarked against four standard reachability engines, namely backward and forward polytopic reachable sets, Hamilton--Jacobi level sets, and closed-loop Monte Carlo simulation. The closed-form test is orders of magnitude cheaper than grid-based Hamilton--Jacobi reachability while tracking closed-loop feasibility closely across a parametric sweep. The residual optimism and the gap against Hamilton--Jacobi are structural rather than a method error: requiring the chaser to reach the hold point and co-rotate with it is strictly stronger than requiring it to arrive with arbitrary velocity, and the gap widens with tumble rate. The criteria therefore serve as an onboard go/no-go bound where Hamilton--Jacobi reachability is prohibitively expensive.

eess.SY

Integrated Lander-Propulsion-GNC Framework for Autonomous Lunar Powered Descent

This paper presents an integrated lander-propulsion-GNC framework for autonomous lunar powered descent. The BUG VTVL test vehicle serves as the reference platform, with the YUNT V0 throttleable bipropellant engine providing variable thrust across a wide operating envelope, integrated with a real-time successive convexification guidance solver. The vehicle design accounts for structural configuration, landing stability, center-of-mass migration, and inertia evolution, while the propulsion architecture defines the throttle ratio, dead-zone behavior, and gimbal authority that constrain the guidance problem. A successive convexification algorithm addresses all nonconvexities; thrust lower bounds, mass depletion coupling, and thruster dead-zone behavior are all handled within a unified second-order cone program solvable in near-real time. Parametric analysis reveals a fundamental coupling between throttle ratio, pointing authority, and surface gravity. Monte Carlo simulations validate guidance robustness, achieving sub-50-meter landing precision under realistic perturbations.

eess.SY

Low-Thrust Trajectory Optimization for Cubesat Lunar Mission: HORYU-VI

This paper presents a low-thrust trajectory optimization strategy to achieve a near-circular lunar orbit for a CubeSat injected into a lunar flyby trajectory. The 12U CubeSat HORYU-VI is equipped with four Hall-effect thrusters and designed as a secondary payload on NASA's Space Launch System under the Artemis program. Upon release, the spacecraft gains sufficient energy to escape the Earth-Moon system after a lunar flyby. The proposed trajectory is decomposed into three phases: (1) pre-flyby deceleration to avoid heliocentric escape, (2) lunar gravitational capture, and (3) orbit circularization to the science orbit. For each phase, an impulsive-burn solution is first computed as an initial guess, which is then refined through finite-burn optimization using Sequential Quadratic Programming (SQP). The dynamical model incorporates Earth-Moon-Sun-Jupiter gravitational interactions and a high-fidelity lunar gravity field. All trajectories are independently verified with NASA's General Mission Analysis Tool (GMAT). Results demonstrate that HORYU-VI achieves lunar capture within 200 days, establishes a stable science orbit at 280 days, and can spiral down to a near-circular 100 km orbit by 450 days, using a total Delta-V of 710 m/s, well within the capability of the electric propulsion system.

eess.SY