arXiv subjects

Olivier Guyon

Publications and source records attributed to Olivier Guyon.

At least 145 records · Page 8Linked to original sources

arXiv2022

Monitoring inner regions in the RY Tau jet

We present multi-epoch observations of the RY~Tau jet for H$α$ and [\ion{Fe}{2}] 1.644 \micron~emission lines obtained with Subaru/SCExAO+VAMPIRES, Gemini/NIFS, and Keck/OSIRIS in 2019--2021. These data show a series of four knots within 1$\arcsec$ consistent with the proper motion of $\sim$0\farcs3~yr$^{-1}$, analogous to the jets associated with another few active T-Tauri stars. However, the spatial intervals between the knots suggest the time intervals of the ejections of about 1.2, 0.7, and 0.7 years, significantly shorter than those estimated for the other stars. These H$α$ images contrast with the archival VLT/SPHERE/ZIMPOL observations from 2015, which showed only a single knot-like feature at $\sim0\farcs25$. The difference between the 2015 and 2019--2021 epochs suggests an irregular ejection interval within the six-year range. Such variations of the jet ejection may be related to a short-term ($<$1 year) variability of the mass accretion rate. We compared the peaks of the H$α$ emissions with the ZIMPOL data taken in 2015, showing the brighter profile at the base ($<0\farcs3$) than the 2020--2021 VAMPIRES profiles due to time-variable mass ejection rates or the heating-cooling balance in the jet. The observed jet knot structures may be alternatively attributed to stationary shocks, but a higher angular resolution is required to confirm its detailed origin.

astro-ph.SR↗

arXiv2022

Images of Embedded Jovian Planet Formation At A Wide Separation Around AB Aurigae

Direct images of protoplanets embedded in disks around infant stars provide the key to understanding the formation of gas giant planets like Jupiter. Using the Subaru Telescope and Hubble Space Telescope, we find evidence for a jovian protoplanet around AB Aurigae orbiting at a wide projected separation (93 au), likely responsible for multiple planet-induced features in the disk. Its emission is reproducible as reprocessed radiation from an embedded protoplanet. We also identify two structures located at 430-580 au that are candidate sites of planet formation. These data reveal planet formation in the embedded phase and a protoplanet discovery at wide, > 50 au separations characteristic of most imaged exoplanets. With at least one clump-like protoplanet and multiple spiral arms, the AB Aur system may also provide the evidence for a long-considered alternative to the canonical model for Jupiter's formation: disk (gravitational) instability.

astro-ph.EP↗

arXiv2021

Multiband imaging of the HD 36546 debris disk: a refined view from SCExAO/CHARIS

We present the first multi-wavelength (near-infrared; $1.1 - 2.4$ $μm$) imaging of HD 36546's debris disk, using the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system coupled with the Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS). As a 3-10 Myr old star, HD 36546 presents a rare opportunity to study a debris disk at very early stages. SCExAO/CHARIS imagery resolves the disk over angular separations of $ρ\sim 0.25" - 1.0"$ (projected separations of $\rm{r_{proj}} \sim 25 - 101$ $\rm{au}$) and enables the first spectrophotometric analysis of the disk. The disk's brightness appears symmetric between its eastern and western extents and it exhibits slightly blue near-infrared colors on average (e.g. $J-K =-0.4\pm0.1$) $-$ suggesting copious sub-micron sized or highly porous grains. Through detailed modeling adopting a Hong scattering phase function (SPF), instead of the more common Henyey-Greenstein function, and using the differential evolution optimization algorithm, we provide an updated schematic of HD 36546's disk. The disk has a shallow radial dust density profile ($α_{in} \approx 1.0$ and $α_{out} \approx -1.5$), a fiducial radius of $r_0 \approx 82.7$ au, an inclination of $i \approx 79.1^\circ$, and a position angle of $\rm PA \approx 80.1^\circ$. Through spine tracing, we find a spine that is consistent with our modeling, but also with a "swept-back wing" geometry. Finally, we provide constraints on companions, including limiting a companion responsible for a marginal Hipparcos-Gaia acceleration to a projected separation of $\lesssim 0.2''$ and to a minimum mass of $\lesssim 11$ $\rm M_{Jup}$.

astro-ph.EP↗

arXiv2021

High contrast imaging wavefront sensor referencing from coronagraphic images

A key challenge of high contrast imaging (HCI) is to differentiate a speckle from an exoplanet signal. The sources of speckles are a combination of atmospheric residuals and aberrations in the non-common path. Those non-common path aberrations (NCPA) are particularly challenging to compensate for as they are not directly measured, and because they include static, quasi-static and dynamic components. The proposed method directly addresses the challenge of compensating the NCPA. The algorithm DrWHO - Direct Reinforcement Wavefront Heuristic Optimisation - is a quasi-real-time compensation of static and dynamic NCPA for boosting image contrast. It is an image-based lucky imaging approach, aimed at finding and continuously updating the ideal reference of the wavefront sensor (WFS) that includes the NCPA, and updating this new reference to the WFS. Doing so changes the point of convergence of the AO loop. We show here the first results of a post-coronagraphic application of DrWHO. DrWHO does not rely on any model nor requires accurate wavefront sensor calibration, and is applicable to non-linear wavefront sensing situations. We present on-sky performances using a pyramid WFS sensor with the Subaru coronagraph extreme AO (SCExAO) instrument.

astro-ph.IM↗

arXiv2021

On-sky validation of image-based adaptive optics wavefront sensor referencing

Differentiating between an exoplanet signal and residual speckle noise is a key challenge in high-contrast imaging. Speckles are due to a combination of fast, slow and static wavefront aberrations introduced by atmospheric turbulence and instrument optics. While wavefront control techniques developed over the last decade have shown promise in minimizing fast atmospheric residuals, slow and static aberrations such as non-common path aberrations (NCPAs) remain a key limiting factor for exoplanet detection. NCPA are not seen by the wavefront sensor (WFS) of the adaptive optics (AO) loop, hence the difficulty in correcting them. We propose to improve the identification and rejection of those aberrations. The algorithm DrWHO, performs frequent compensation of static and quasi-static aberrations to boost image contrast. By changing the WFS reference at every iteration of the algorithm, DrWHO changes the AO point of convergence to lead it towards a compensation of the static and slow aberrations. References are calculated using an iterative lucky-imaging approach, where each iteration updates the WFS reference, ultimately favoring high-quality focal plane images. We validate this concept through numerical simulations and on-sky testing on the SCExAO instrument at the 8.2-m Subaru telescope. Simulations show a rapid convergence towards the correction of 82% of the NCPAs. On-sky tests are performed over a 10-minute run in the visible (750 nm). We introduce a flux concentration (FC) metric to quantify the point spread function (PSF) quality and measure a 15.7% improvement. The DrWHO algorithm is a robust focal-plane wavefront sensing calibration method that has been successfully demonstrated on sky. It does not rely on a model nor requires wavefront sensor calibration or linearity. It is compatible with different wavefront control methods, and can be further optimized for speed and efficiency.

astro-ph.IM↗

arXiv2021

High contrast imaging at the photon noise limit with self-calibrating WFS/C systems

High contrast imaging (HCI) systems rely on active wavefront control (WFC) to deliver deep raw contrast in the focal plane, and on calibration techniques to further enhance contrast by identifying planet light within the residual speckle halo. Both functions can be combined in an HCI system and we discuss a path toward designing HCI systems capable of calibrating residual starlight at the fundamental contrast limit imposed by photon noise. We highlight the value of deploying multiple high-efficiency wavefront sensors (WFSs) covering a wide spectral range and spanning multiple optical locations. We show how their combined information can be leveraged to simultaneously improve WFS sensitivity and residual starlight calibration, ideally making it impossible for an image plane speckle to hide from WFS telemetry. We demonstrate residual starlight calibration in the laboratory and on-sky, using both a coronagraphic setup, and a nulling spectro-interferometer. In both case, we show that bright starlight can calibrate residual starlight.

astro-ph.IM↗

arXiv2021

SCExAO, a testbed for developing high-contrast imaging technologies for ELTs

To directly detect exoplanets and protoplanetary disks, the development of high accuracy wavefront sensing and control (WFS&C) technologies is essential, especially for ground-based Extremely Large Telescopes (ELTs). The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a high-contrast imaging platform to discover and characterize exoplanets and protoplanetary disks. It also serves as a testbed to validate and deploy new concepts or algorithms for high-contrast imaging approaches for ELTs, using the latest hardware and software technologies on an 8-meter class telescope. SCExAO is a multi-band instrument, using light from 600 to 2500 nm, and delivering a high Strehl ratio (>80% in median seeing in H-band) downstream of a low-order correction provided by the facility AO188. Science observations are performed with coronagraphs, an integral field spectrograph, or single aperture interferometers. The SCExAO project continuously reaches out to the community for development and upgrades. Existing operating testbeds such as the SCExAO are also unique opportunities to test and deploy the new technologies for future ELTs. We present and show a live demonstration of the SCExAO capabilities (Real-time predictive AO control, Focal plane WFS&C, etc) as a host testbed for the remote collaborators to test and deploy the new WFS&C concepts or algorithms. We also present several high-contrast imaging technologies that are under development or that have already been demonstrated on-sky.

astro-ph.IM↗

arXiv2021

SCExAO/CHARIS Direct Imaging of A Low-Mass Companion At A Saturn-Like Separation from an Accelerating Young A7 Star

We present the SCExAO direct imaging discovery and characterization of a low-mass companion to the nearby young A7IV star, HD 91312. SCExAO/CHARIS $JHK$ (1.1-2.4 $μm$) spectra and SCExAO/HiCIAO $H$ band imaging identify the companion over a two year baseline in a highly inclined orbit with a maximum projected separation of 8 au. The companion, HD 91312 B, induces an 8.8-$σ$ astrometric acceleration on the star as seen with the Gaia & Hipparcos satellites and a long-term radial velocity trend as previously identified by Borgniet et al. (2019). HD 91312 B's spectrum is consistent with that of an early-to-mid M dwarf. Hipparcos and Gaia absolute astrometry, radial-velocity data, and SCExAO/CHARIS astrometry constrain its dynamical mass to be $0.337^{+0.042}_{-0.044}$M$_\odot$, consistent with - but far more precise than - masses derived from spectroscopy, and favors a nearly edge-on orbit with a semi-major axis of $\sim$9.7 au. This work is an example of precisely characterizing properties of low-mass companions at solar system-like scales from a combination of direct imaging, astrometry, and radial-velocity methods.

astro-ph.SR↗

arXiv2021

A New Type of Exoplanet Direct Imaging Search: The SCExAO/CHARIS Survey of Accelerating Stars

We present first results from a new exoplanet direct imaging survey being carried out with the Subaru Coronagraphic Extreme Adaptive Optics project (SCExAO) coupled to the CHARIS integral field spectrograph and assisted with Keck/NIRC2, targeting stars showing evidence for an astrometric acceleration from the Hipparcos and Gaia satellites. Near-infrared spectra from CHARIS and thermal infrared photometry from NIRC2 constrain newly-discovered companion spectral types, temperatures, and gravities. Relative astrometry of companions from SCExAO/CHARIS and NIRC2 and absolute astrometry of the star from Hipparcos and Gaia together yield direct dynamical mass constraints. Even in its infancy, our survey has already yielded multiple discoveries, including at least one likely jovian planet. We describe how our nascent survey is yielding a far higher detection rate than blind surveys from GPI and SPHERE, mass precisions reached for known companions, and the path forward for imaging and characterizing planets at lower masses and smaller orbital separations than previously possible.

astro-ph.EP↗

arXiv2021

The Planetary Systems Imager Adaptive Optics System: An Initial Optical Design and Performance Analysis Tools for the PSI-Red AO System

The Planetary Systems Imager (PSI) is a proposed instrument for the Thirty Meter Telescope (TMT) that provides an extreme adaptive optics (AO) correction to a multi-wavelength instrument suite optimized for high contrast science. PSI's broad range of capabilities, spanning imaging, polarimetry, integral field spectroscopy, and high resolution spectroscopy from 0.6-5 microns, with a potential channel at 10 microns, will enable breakthrough science in the areas of exoplanet formation and evolution. Here, we present a preliminary optical design and performance analysis toolset for the 2-5 microns component of the PSI AO system, which must deliver the wavefront quality necessary to support infrared high contrast science cases. PSI-AO is a two-stage system, with an initial deformable mirror and infrared wavefront sensor providing a common wavefront correction to all PSI science instruments followed by a dichroic that separates "PSI-Red" (2-5 microns) from "PSI-Blue" (0.5-1.8 microns). To meet the demands of visible-wavelength high contrast science, the PSI-Blue arm will include a second deformable mirror and a visible-wavelength wavefront sensor. In addition to an initial optical design of the PSI-Red AO system, we present a preliminary set of tools for an end-to-end AO simulation that in future work will be used to demonstrate the planet-to-star contrast ratios achievable with PSI-Red.

astro-ph.IM↗

arXiv2021

High-contrast integral field spectropolarimetry of planet-forming disks with SCExAO/CHARIS

We describe a new high-contrast imaging capability well suited for studying planet-forming disks: near-infrared (NIR) high-contrast spectropolarimetric imaging with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system coupled with the Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS) integral field spectrograph (IFS). The advent of extreme adaptive optics (AO) systems, like SCExAO, has enabled recovery of planet-mass companions at the expected locations of gas-giant formation in young disks alongside disk structures (such as gaps or spirals) that may indicate protoplanet formation. In combination with SCExAO, the CHARIS IFS in polarimetry mode allows characterization of these systems at wavelengths spanning the NIR J, H, and K bands ($1.1-2.4$ $μm$, $R\sim20$) and at angular separations as small as 0.04". By comparing the resulting images with forward-modeled scattered light or 3D radiative-transfer models, the likely origins of any observed features can be assessed. Utilization of swift optimization algorithms, such as differential evolution (DE), to identify model parameters that best reproduce the observations allows plausible disk geometries to be explored efficiently. The recent addition of CHARIS's unique integral field spectropolarimetry mode has further facilitated the study of planet-forming disks -- aiding in the confirmation of candidate protoplanets, the diagnosis of disk structures, and the characterization of dust grain populations. We summarize preliminary results for two young planet-forming disk systems based on observations with the novel integral field spectropolarimetry mode for SCExAO/CHARIS.

astro-ph.EP↗

arXiv2021

Full characterization of the instrumental polarization effects of the spectropolarimetric mode of SCExAO-CHARIS

SCExAO at the Subaru telescope is a visible and near-infrared high-contrast imaging instrument employing extreme adaptive optics and coronagraphy. The instrument feeds the near-infrared light (JHK) to the integral-field spectrograph CHARIS. The spectropolarimetric capability of CHARIS is enabled by a Wollaston prism and is unique among high-contrast imagers. We present a detailed Mueller matrix model describing the instrumental polarization effects of the complete optical path, thus the telescope and instrument. From measurements with the internal light source, we find that the image derotator (K-mirror) produces strongly wavelength-dependent crosstalk, in the worst case converting ~95% of the incident linear polarization to circularly polarized light that cannot be measured. Observations of an unpolarized star show that the magnitude of the instrumental polarization of the telescope varies with wavelength between 0.5% and 1%, and that its angle is exactly equal to the altitude angle of the telescope. Using physical models of the fold mirror of the telescope, the half-wave plate, and the derotator, we simultaneously fit the instrumental polarization effects in the 22 wavelength bins. Over the full wavelength range, our model currently reaches a total polarimetric accuracy between 0.08% and 0.24% in the degree of linear polarization. We propose additional calibration measurements to improve the polarimetric accuracy to <0.1% and plan to integrate the complete Mueller matrix model into the existing CHARIS post-processing pipeline. Our calibrations of CHARIS' spectropolarimetric mode will enable unique quantitative polarimetric studies of circumstellar disks and planetary and brown dwarf companions.

astro-ph.IM↗

arXiv2021

Imaging low-mass planets within the habitable zones of nearby stars with ground-based mid-infrared imaging

Giant exoplanets on 10-100 au orbits have been directly imaged around young stars. The peak of the thermal emission from these warm young planets is in the near-infrared (~1-5 microns), whereas mature, temperate exoplanets (i.e., those within their stars' habitable zones) radiate primarily in the mid-infrared (mid-IR: ~10 microns). If the background noise in the mid-IR can be mitigated, then exoplanets with low masses--including rocky exoplanets--can potentially be imaged in very deep exposures. Here, we review the recent results of the Breakthrough Watch/New Earths in the Alpha Centauri Region (NEAR) program on the Very Large Telescope (VLT) in Chile. NEAR pioneered a ground-based mid-IR observing approach designed to push the capabilities for exoplanet imaging with a specific focus on the closest stellar system, Alpha Centauri. NEAR combined several new optical technologies--including a mid-IR optimized coronagraph, adaptive optics system, and rapid chopping strategy to mitigate noise from the central star and thermal background within the habitable zone. We focus on the lessons of the VLT/NEAR campaign to improve future instrumentation--specifically on strategies to improve noise mitigation through chopping. We also present the design and commissioning of the Large Binocular Telescope's Exploratory Survey for Super-Earths Orbiting Nearby Stars (LESSONS), an experiment in the Northern hemisphere that is building on what was learned from NEAR to further push the sensitivity of mid-IR imaging. Finally, we briefly discuss some of the possibilities that mid-IR imaging will enable for exoplanet science.

astro-ph.IM↗

arXiv2021

Characterizing deformable mirrors for the MagAO-X instrument

The MagAO-X instrument is a new extreme adaptive optics system for high-contrast imaging at visible and near-infrared wavelengths on the Magellan Clay Telescope. A central component of this system is a 2040-actuator microelectromechanical deformable mirror (DM) from Boston Micromachines Corp. that operates at 3.63 kHz for high-order wavefront control (the tweeter). Two additional DMs from ALPAO perform the low-order (the woofer) and non-common-path science-arm wavefront correction (the NCPC DM). Prior to integration with the instrument, we characterized these devices using a Zygo Verifire Interferometer to measure each DM surface. We present the results of the characterization effort here, demonstrating the ability to drive tweeter to a flat of 6.9 nm root mean square (RMS) surface (and 0.56 nm RMS surface within its control bandwidth), the woofer to 2.2 nm RMS surface, and the NCPC DM to 2.1 nm RMS surface over the MagAO-X beam footprint on each device. Using focus-diversity phase retrieval on the MagAO-X science cameras to estimate the internal instrument wavefront error (WFE), we further show that the integrated DMs correct the instrument WFE to 18.7 nm RMS, which, combined with a 11.7% pupil amplitude RMS, produces a Strehl ratio of 0.94 at H$α$.

astro-ph.IM↗

arXiv2021

SCExAO/MEC and CHARIS Discovery of a Low Mass, 6 AU-Separation Companion to HIP 109427 using Stochastic Speckle Discrimination and High-Contrast Spectroscopy

We report the direct imaging discovery of a low-mass companion to the nearby accelerating A star, HIP 109427, with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument coupled with the MKID Exoplanet Camera (MEC) and CHARIS integral field spectrograph. CHARIS data reduced with reference star PSF subtraction yield 1.1-2.4 $μ$m spectra. MEC reveals the companion in $Y$ and $J$ band at a comparable signal-to-noise ratio using stochastic speckle discrimination, with no PSF subtraction techniques. Combined with complementary follow-up $L_{\rm p}$ photometry from Keck/NIRC2, the SCExAO data favors a spectral type, effective temperature, and luminosity of M4-M5.5, 3000-3200 $K$, and $\log_{10}(L/L_{\rm \odot}) = -2.28^{+0.04}_{-0.04}$, respectively. Relative astrometry of HIP 109427 B from SCExAO/CHARIS and Keck/NIRC2, and complementary Gaia-Hipparcos absolute astrometry of the primary favor a semimajor axis of $6.55^{+3.0}_{-0.48}$ au, an eccentricity of $0.54^{+0.28}_{-0.15}$, an inclination of $66.7^{+8.5}_{-14}$ degrees, and a dynamical mass of $0.280^{+0.18}_{-0.059}$ $M_{\odot}$. This work shows the potential for extreme AO systems to utilize speckle statistics in addition to widely-used post-processing methods to directly image faint companions to nearby stars near the telescope diffraction limit.

astro-ph.SR↗

arXiv2021

The Mysterious Lives Of Speckles. I. Residual atmospheric speckle lifetimes in ground-based coronagraphs

High-contrast imaging observations are fundamentally limited by the spatially and temporally correlated noise source called speckles. Suppression of speckle noise is the key goal of wavefront control and adaptive optics (AO), coronagraphy, and a host of post-processing techniques. Speckles average at a rate set by the statistical speckle lifetime, and speckle-limited integration time in long exposures is directly proportional to this lifetime. As progress continues in post-coronagraph wavefront control, residual atmospheric speckles will become the limiting noise source in high-contrast imaging, so a complete understanding of their statistical behavior is crucial to optimizing high-contrast imaging instruments. Here we present a novel power spectral density (PSD) method for calculating the lifetime, and develop a semi-analytic method for predicting intensity PSDs behind a coronagraph. Considering a frozen-flow turbulence model, we analyze the residual atmosphere speckle lifetimes in a MagAO-X-like AO system as well as 25--39 m giant segmented mirror telescope (GSMT) scale systems. We find that standard AO control shortens atmospheric speckle lifetime from ~130 ms to ~50 ms, and predictive control will further shorten the lifetime to ~20 ms on 6.5 m MagAO-X. We find that speckle lifetimes vary with diameter, wind speed, seeing, and location within the AO control region. On bright stars lifetimes remain within a rough range of ~20 ms to ~100 ms. Due to control system dynamics there are no simple scaling laws which apply across a wide range of system characteristics. Finally, we use these results to argue that telemetry-based post-processing should enable ground-based telescopes to achieve the photon-noise limit in high-contrast imaging.

astro-ph.IM↗

arXiv2021

Millisecond Exoplanet Imaging, I: Method and Simulation Results

One of the top remaining science challenges in astronomical optics is the direct imaging and characterization of extrasolar planets and planetary systems. Directly imaging exoplanets from ground-based observatories requires combining high-order adaptive optics with a stellar coronagraph observing at wavelengths ranging from the visible to the mid-IR. A limiting factor in achieving the required contrast (planet-to-star intensity ratio) is quasi-static speckles, caused largely by non-common path aberrations (NCPA) in the coronagraph. Starting with a realistic simulator of a telescope with an AO system and a coronagraph, this article provides simulations of several closely related millisecond regression models requiring inputs of the measured wavefronts and science camera images. The simplest regression model, called the naive estimator, does not treat the noise and other sources of information loss in the WFS. The naive estimator provided a useful estimate of the NCPA of $\sim$ 0.5 radian RMS, with an accuracy of $\sim$ 0.06 radian RMS in one minute of simulated sky time on a magnitude 8 star. The bias-corrected estimator generalizes the regression model to account for the noise and information loss in the WFS. A simulation of the bias-corrected estimator with four minutes of sky time included an NCPA of $\sim 0.05 \,$ radian RMS and an extended exoplanet scene. The joint regression of the bias-corrected estimator simultaneously achieved an NCPA estimate with an accuracy of $\sim 5\times10^{-3} \,$radian and contrast of $\sim 10^{-5}$ on the exoplanet scene. In addition, the estimate of the exoplanet image was completely free of the subtraction artifacts that always plague differential imaging. The estimate of the exoplanet image obtained by the joint regression was nearly identical to the image obtained by subtraction of a perfectly known point-spread function.

astro-ph.IM↗

arXiv2021

3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets

By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demonstrate the potential of the instrument via initial results from the first on-sky runs at the 8.2 m Subaru Telescope with a spectrograph using off-the-shelf optics, allowing for rapid development with low cost.

astro-ph.IM↗