arXiv Science⌕ Search

arXiv subjects

Olga Volkova

Publications and source records attributed to Olga Volkova.

9 recordsLinked to original sources

Viscoelastic behavior at high volume fraction of magnetorheological suspensions in the presence of discontinuous shear thickening

This paper presents a study of the viscoelastic behavior of suspensions of carbonyl iron particles coated with a superplastifier molecule and dispersed in ethylene glycol. The experiments were done in plate-plate configuration with the rheometer MCR502 of Anton Paar. The discontinuous shear thickening (DST) transition manifests by a large jump of the storage and loss modulus. For low magnetic fields ( H <___50___kA/m) the increase of moduli is at least of two orders of magnitude compared to the one induced by the magnetic field in the absence of DST. The behavior of the critical strain and the critical stress where the transition happens are presented for different frequencies and fields and a qualitative interpretation of the observed behavior is presented.

physics.flu-dyn↗

Enhancement of the magnetorheological effect using discontinuous shear thickening with a mixture of magnetic and non magnetic particles

The phenomenon of discontinuous shear thickening (DST) is observed in suspensions of solid particles with a very high-volume fraction. Using a suspension of magnetic particles at high-volume fraction we have, for the first time, demonstrated experimentally the presence of a frictional network of particles by a simultaneous measurement of the electrical resistance of the suspension and of the rheological curve. An obstacle for the applications of MRS remains the sedimentation and aggregation linked to the high density of the iron microparticles. We have recently found that a small fraction of ferromagnetic particles within a concentrated suspension of calcium carbonate particles is not only sufficient to trigger the transition by application of a magnetic field but also optimum for the amplitude of the jump in viscosity observed in DST. We shall explain this result from stress transmission between the magnetic particles and nonmagnetic ones, both inserted in the percolated network of particles. We will also highlight the role of the polyelectrolyte adsorbed on the surface of the particles in the DST transition through the balance between the repulsive entropic force between two layers of polymer adsorbed on different particles and the magnetic attraction force.

cond-mat.soft↗

EvoMem: Memory-Augmented Evolution for Code Optimization

Successful mutation strategies in evolutionary code search may contain reusable knowledge that is useful beyond a single run, and in some cases may transfer across related tasks and domains. However, existing LLM-driven evolutionary frameworks largely discard such knowledge, repeatedly rediscovering similar ideas and limiting opportunities for cross-run and cross-task learning. We introduce EvoMem, a persistent memory architecture for LLM-based evolutionary program search that captures and reuses candidate mutation knowledge. EvoMem converts successful mutation events into structured, task-aware advice for future runs. It operates in two phases: after each run, it extracts and stores promising ideas with provenance, and during subsequent evolution, it retrieves a small set of relevant instructions based on the current task and program context to guide mutation. Across geometric optimization, multi-hop question answering, GPU kernel optimization, and related benchmarks, our experiments show positive average improvements in target metrics or search speed for most evaluated settings, while also revealing variability across tasks. Overall, EvoMem provides evidence that persistent memory can reduce some redundant exploration and improve the reuse and adaptation of successful strategies in LLM-driven evolutionary search.

cs.AI↗

Composition-Dependent Thermoelectric Properties of Hybrid Tin Perovskites (CH3NH3)xCs1-xSnI3: Insights into Electrical and Thermal Performance

This work presents a comprehensive investigation of the thermoelectric properties of bulk hybrid perovskites with the general formula MAxCs1-xSnI3 (0 < x < 1). A series of bulk samples were synthesized and systematically characterized to explore the relationship between composition, microstructure, and thermoelectric performance. Compositions with intermediate MA+ content (x = 0.2 and x = 0.5) show an optimal balance between electrical conductivity and Seebeck coefficient, yielding high power factor values (0.6 - 0.7 muW/cmK2 at 423 K) and favorable thermoelectric performance with zT values up to 0.06. In contrast, compositions with MA+ contents (x = 0, x = 0.6, and x = 0.8) exhibit lower thermoelectric performance due to reduced Seebeck coefficients or suppressed conductivity. MASnI3 shows promising low-temperature thermoelectric performance with a maximum $zT$ of 0.10 at 423 K, attributed to its rapidly increasing Seebeck coefficient. These findings highlight the importance of microstructural control and composition optimization in the development of hybrid perovskites for thermoelectric applications.

cond-mat.mtrl-sci↗

Discontinuous Shear Thickening (DST) transition with spherical iron particles coated by adsorbed brush polymer

In this work we explore the rheology of very concentrated (0.55<$Φ$<0.67) suspensions of carbonyl iron (CI) particles coated by a small polymer. A strong DST is observed in a large range of volume fraction presenting some specificities relatively to other systems. In particular, in a given range of volume fraction, the DST transition appears suddenly without being preceded by shear thickening. The presence of a frictional network of particles is confirmed by a simultaneous measurement of the electric resistance of the suspension and of the rheological curve. Using the Wyart-Cates model we show that, increasing the volume fraction, the fraction of frictional contacts grows more and more quickly with the stress that disagrees with the prediction of computer simulations. The same kind of behavior is observed in the presence of a magnetic field with, in addition, a very strong increase of the viscosity with the magnetic field before the transition. We interpret this behavior by the interpenetration of the polymer layer under the effect of the shear stress-and of the magnetic stress-followed by the expulsion of the polymer out of the surfaces. Besides we point that, above the DST transition, we do not observe a jamming in the range of volume fraction whereas it is predicted by the W-C model. Based on the fact that in the absence of shear flow, the polymer should come back to the surface and destroy the frictional contacts we can predict an asymptotic non-zero shear rate and reproduce the experimental behavior.

cond-mat.mtrl-sci↗

Capillary flow of a suspension in the presence of discontinuous shear thickening

The rheology of suspensions showing discontinuous shear thickening (DST) is well documented in conventional rheometer with rotating tools, but their study in capillary flow is still lacking. We present results obtained in a homemade capillary rheometer working in an imposed pressure regime. We show that the shape of the experimental curve giving the volume flow rate versus the wall stress in a capillary can be qualitatively reproduced from the curve obtained in rotational geometry at imposed stress but instead of a sharp decrease of the volume flow rate observed at a critical stress, this transposition predicts a progressive decrease in flow rate. The Wyart-Cates theory is used to reproduce the stress-shear rate curve obtained in rotational geometry and then applied to predict the volume flow rate at imposed pressure. The theoretical curve predicts a total stop of the flow at high stress, whereas experimentally it remains constant. We propose a modification of the theory which, by taking into account the relaxation of the frictional contacts in the absence of shear rate, well predicts the high stress behavior. We also hypothesized that the DST transition propagates immediately inside the capillary, once the wall shear stress has reached its critical value: $τ_R=τ_c$, even if the internal shear stress $τ(r<R)$ is below the critical one. In this way the whole experimental curve can be well reproduced by the modified W-C model.

cond-mat.mtrl-sci↗

Tunable discontinuous shear thickening in capillary flow of MR suspensions

Very concentrated suspensions of iron particles in water or ethylene glycol can be obtained thanks to the use of superplasticizer molecules used in cement industry. At high volume fractions, these suspensions show a discontinuous shear thickening which was thoroughly characterized in rotational geometries. We will show that the jamming transition is also present in a capillary flow, and that it manifests through the formation of a non-consolidated porous medium at the constriction between the barrel and the capillary. In suspension of iron particles, the dynamics of formation of this porous medium, and so the pressure, can be controlled by a low magnetic field and is reversible for a constant volume flow rate, opening potential new applications in the domain of dampers and force control devices.

cond-mat.mtrl-sci↗

A 57Fe Mössbauer Study Of Local Structure And Spin Arrangements In Antiferromagnetic NaFeAs

Detailed 57Fe Mössbauer spectroscopy measurements on superconducting NaFeAs powder crystals have been performed. The 57Fe spectra recorded in the paramagnetic temperature range (T > TN \approx 46 +/- 2 K) were discussed supposing Fe2+ ions are located in distorted tetrahedral (FeAs4) polyhedra. Our results reveal that the structural transition (TS \approx 55 K) has a weak effect on the electronic structure of iron atoms while the development of the antiferromagnetic order (T =< TN) induces a redistribution of the charge at 57Fe nuclei. In the low-temperature range, the spectra show a diffuse resonance absorption structure which evidences for the existence of a continuous distribution of hyperfine fields HFe at 57Fe nuclei. The shape of these spectra can be related to the formation of a microdomain structure or phase separation. Analysis of the resulting distributions p(HFe) has shown that the Mössbauer spectra give consistent and physically reasonable 57Fe hyperfine parameters over the whole temperature range.

cond-mat.supr-con↗

Local Structure and Hyperfine Interactions of 57Fe in NaFeAs Studied by Mossbauer Spectroscopy

Detailed 57Fe Mossbauer spectroscopy measurements on superconducting NaFeAs powder samples have been performed in the temperature range 13 K < T < 300 K. The 57Fe spectra recorded in the paramagnetic range (T > TN ~ 46 K) were discussed supposing that most of the Fe2+ ions are located in distorted (FeAs4) tetrahedral of NaFeAs phase, while additional minor (< 10%) component of the spectra corresponds to impurity or intergrowth NaFe2As2 phase with a nominal composition near "NaFe2As2". Our results reveal that the structural transition (TS ~ 55K) has a weak effect on the electronic structure of iron ions, while at T < TN the spectra show a continuous distribution of hyperfine fields HFe . Shape of these spectra was analyzed in term of two models: (i) an incommensurate spin density wave modulation of iron magnetic structure, (ii) a formation of a microdomain structure or phase separation. It was shown that the hyperfine parameters obtained using these two methods have very similar values over the whole temperature range. The analysis of the temperature dependence HFe(T) with the Bean-Rodbell model leads to ksi = 1.16 +/- 0.05, suggesting that the magnetic phase transition is first-order in nature. A sharp evolution of the VZZ(T) and etha(T) parameters of the full Hamiltonian of hyperfine interactions near T ~ (TN, TS), were interpreted as a manifestation of the anisotropic electron redistribution between the dxz, dyz- and dxy-orbitals of the iron ions.

cond-mat.supr-con↗